1.Add filament type into consideration when selecting best map for
ams in filament saving mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7d4a4ff66da479ab560eaeea614e5bbf0f930d3f
1. Only check printablily if have explicit filament map
2. Refine some sentences
jira:STUDIO-9753,STUDIO-9727
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2fc3aa2276dc6f514c50ac2fcaf9509f41e778f3
when obj is small, it uses the full build volume to compute the empty cell
we need to use the shared one
jira: STUDIO-9583
Change-Id: I4cc183df38e054a7b94579637a49168c2fb77992
(cherry picked from commit fea423cdad4ee1a24c077cfeed99962e89953d5b)
ENH: [tree support] use 2 walls if necessary
Add impact_strength_z for filaments. Use 2 walls more for weaker filaments.
jira: none
Change-Id: I0c7cfcff31f1026d57630283775e7aeb6c311146
ENH: [tree support] ease removal of large area supports
Use xy_expansion to expand overhangs for better removal of large area supports
jira: none
Change-Id: Ief59a811204478e0e0a63ae10a9d63f24512fcfb
ENH: [tree support]shrink polygon support
jira: none
Change-Id: I621aa30191d235329156015ef98d260c5b1d9ca8
FIX: fix organic tree, remove ePolygon support more easily
1. add protection to organic tree when xy_distance is set to 0.
2. add detailed classification of nodes(BigFlat && Thinplate && SharpTail && Cantilever && Normal)
3. modify the corresponding generation logic when drawing ePolygon node circles
Change-Id: I5c52522b9adad832c9542a400ebf4e1e27a61754
FIX: dont set overhang with large areas to 'SharpTail'
Change-Id: Ib118abc54edcb0024be5b0d5d6a51b4bd7b5cb47
FIX: merge support interfaces into a continuous large one
jira: STUDIO-8611
github: #5132
Change-Id: I12ee4a9f88a78304a98f354bfaa92e2a05f19ec2
ENH: dont expand sharp tails
Also add interface below sharp tails when using soluble supports.
Change-Id: Ibf3af1fe466dd7f02f00357c49ad639249efab16
FIX:split holes to help remove
when one overhang area contains holes, split it into 4 pieces with one hole's center. when choosing this center hole, consider if it's collided in lower layers, then choose the bigger hole.
new: add xy_expansion to gap_width to balance the offset later in draw_circles
Change-Id: Ib2452a5f5afdc56e219e69caf8c373d9d9ce8cbf
FIX: sync printer preset when sync extruder info
jira: none
Change-Id: I0b856d38f75816036e428844aabe6fb4c58471f2
FIX: wall count=1 not working
Change-Id: Ib9c174b49f217cc76b42c6ecdb8acdec4f7051b7
ENH: merge circle nodes into polygon overhangs nearby
AND set the number of support_roof_layers below interface to 2, which developing the interface quality.
Change-Id: I3675d37a12321317672a096dc63a9e51e2b1e984
FIX: smooth, floor embedding, delete useless codes
Change-Id: I3a5e2634e35e2ed1c310e89fd22b1d75d9cde682
FIX: remove include "Brim.cpp"
Change-Id: Id99ff4495f6d0f78d8a865d14d997a5cd9aa0791
FIX: fix sharptail detection in organic tree
Change-Id: Ic1b9a0ebf595c814f7d58356270b2a740980c3b4
(cherry picked from commit f9bbc160ae44f3126ae10c4b964fa730d7deb03f)
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
1. the error start position after filament change
2. the error wall depth print with tpu
jira: none
Change-Id: I26d4e1c5c5c3bcae14555f9a875485435cdd6b97
1. Always change the map and mode in plate if plate mode is not default
2. Always add pop up before slice
3. Fix the mapping issue in gcode viewer
jira: studio-9523,studio-9519,studio-9513,studio-9479
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d7d5daf081951ea2d49e06565762ac24064e77c
1.Outer wall contour strategy can cause bead with different idx to
link. Temperoraily revert it to avoid the issue
2.Only seperate wall generation if needed
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If53fcd4fe6bd81bb9621b8e1917e299abc83f41b
1. Add OuterWallContourStrategy class to generate outer wall contour paths.
2. Fix top one wall issue in arachne
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I44574df765cdd0d0d3fc4f6c3f7b846dfb4fa21f
1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
1. Add protection for building machine filaments.Sometimes we don't
know the info about maahcine filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3198d3a1a8825aa50aa49734f60a32620fc4f890
1.fix crash when deleting filaments after sync ams or inital start up
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I00c96fcebf7e0fbc127414eae44f184e3caf4dd9
(cherry picked from commit 6fb0ef6e68ed673d04c1c2311835e9988b1c70d3)
1.When there are identical materials, try to make the quantity of
materials for each nozzle as similar as possible after grouping.
2.Fix an encoding error
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iad77d7a995b9c25d004026f409c7e2ecbb8269db
(cherry picked from commit 13d7cd06252678b6b084d17438e99ff808a4191d)
1.Should use idx in used filaments in filament group algorithm
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5acc849827d84db090e61a45e80a3df2866b2724
(cherry picked from commit 84c55c10edfda91df16843f317ebc7912205b202)
1.Caused by process_arachne.When generating walls in the Arachne mode,
first generate 1 wall, then generate n-1 walls. It is different from
directly generating n walls
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifda35a5073531b3a273b9ad416417ca96325ca14
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
yongfang.bian
xun.zhang
zhimin.zeng
lane.wei
chunmao.guo
zhou.xu
xin.zhang
Arthur
qing.zhang
jiangkai.zhao