by the multimaterial painting.
This commit is cherry pick from Prusa, the commit number is
9bce0fcf9bb479c289c396e7e23ce95841a61628
Thanks to Prusa.
Jira: XXXX
Change-Id: I29ad1fa9ab3ccc393a1e2affde1ae869d0a33afa
in previous codes, we generate brim for an object with raft, which do not need brim.
jira-ID: https://jira.bambooolab.com/browse/STUDIO-4238
Change-Id: I4b2c2c1c744c098cdcfdb03c2100b06a458e983a
(cherry picked from commit 0d06415d42c95e40f79a228f75827588171d410c)
Add cmd line option to pass layer change gcode.
This is useful for lithophane auto change colors.
Cmd: --custom-gcode custom_gcode_toolchange.json
Examples of the input json file can be found in the jira.
Jira: STUDIO-4070
Change-Id: I5beb5ff7d6d81028e95013e79f955e498cd3ba30
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. treat the critical slicing warnings as error
2. save more information into result
including the triangle counts and the non-critical warnings
JIRA: STUDIO-4217
Change-Id: I25b746d06c9a1ef2d642c67852577982a2986322
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
1. Add align_to_y_axis option for auto-arrange.
This is useful for auto-arranging of i3 type printers.
2. Change default value of align_to_origin to true when switching
from non-i3 printers to i3 printers.
JIRA: STUDIO-2583
Change-Id: I7dabab846022a0da030a9fec060a60a4207537a0
(cherry picked from commit 9c549c18ecc1f513644e1bc4a60d6936721a13ac)
1. Enable open support_activate_air_filtration
2. Fix display exhaust fan params when support_activate_air_filtration is closed
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieddba4bb104b6068b5afb4c109ea6b90d7c4045b
1. move the global functions to Model
2. set brim automation paremeters before process
JIRA: STUDIO-4208
Change-Id: I3f75175ec74d214ca2a6d5f3ade56d08e0ecd4f3
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
Updated sandwich mode code to cater for edge case where two sets of internal perimeters were causing the perimeters of another island to not be re-ordered correctly.
Github pull request: #2182
Change-Id: Ib58722db8cb76aa6b6474412c71993bb8e4dc007
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
so that it does not decimate all triangles on very high detailed models
Relevant issue 8834 Access Error when slicing
Github: #2283
Change-Id: I047361c88c561962ef4d3cf67bc0126402c41941
In adaptive layer height, smoothing 1 time is not usable.
There'll be layer lines at the layer height change boundaries.
Change-Id: I84a8b69744db4936062d631864836f0a8cd99cf6
(cherry picked from commit ca77408f38c9a57bee4ab8ee4989024f7f105317)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
allow changing the relative angle between the top surface and the ironing.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I85e8ff3d05d3a6d9408da011631e7d71a6d85178
fix the ironing be apply to the preview layer of bridge
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I53cb4e6ff80176953c2927c1d9dc5eecc590764c
The bottom interface layers were not right when "independent support layer height" is enabled.
This commit ensures there are always 2 bottom interface layers and the gap
is not less than specified. However, the gap may be slightly larger.
Jira: STUDIO-3842, STUDIO-2138
Github: #2127
Change-Id: Ifd8fbc4c7bc6dd92f2534fdd0179458a9e93c79a
Add a new calibration pattern method for pressure advance calibration, which can better test the influence of k value on the corner. The changes of this patch are picked from OrcaSlicer by thewildmage, thanks to thewildmage for the great work!
github issue: https://github.com/bambulab/BambuStudio/issues/2222
Change-Id: Icc8fd4d52b20c1668bfa08716b48549dfada515b
(cherry picked from commit eb72d8b681bef270906406a2d10a36d4efbce900)
Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
We planed to skip uncessary filament changing when skip
object. However, this caused color mixing.
If we try to fix the color mixing issue, the flush gcode
should be generated by printer itself. This is not a short
time job.
So currently we never skip changing filament when skip
object. This will not save much time and flushing. But better
than none.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6046cd2765cf68058712b4256402acc0be771144
Can't delete nodes with no children, otherwise the parent-child relations may be corrupted.
Jira: STUDIO-3737, MAK-1557
Change-Id: I1de39e182bac4a55a8739c00e59fdf7b9b5e4dfb
fix bug with zero width tree supports throwing exception.
This a PR from @scottmudge commited to OrcaSlicer.
More than the original commit, we also unify the usage of line_width and
support_extrusion_width, making things simpler.
Change-Id: I0b7a4344cbda4fdf05dfd9f8965f598ad6844429
Previously holes of enforcer_polygons was taken as contours,
which caused enforcers inside a hole were too large.
Jira: STUDIO-3877
Change-Id: If38c34e2469b822012a2ed0b082783563fe99228
split to 3 mode
not apply
all top surface
topmost surface
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id9bb1a6ded7414b2f093ac01e4ecb4b93057d022
bug: There is a part of the overhang area in the model that cannot be applied
Change-Id: Ia1045225776ccb0e8730912aae1d4c7509f40c5b
(cherry picked from commit daa3e131564690e9e169313d147fd84537b898ca)
Add filament density and filament diameter in header block
Add max z height in header block
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I128f9bde4188882baed76340e3f9d752d8a9b645
corner cases
this patch is cherry-picked from PrusaSlicer's 84722876012ca310e29b291e10fef9d18ae26cea
thanks to 'Vojtech Bubnik' for the fix
Implementing a test whether the current thread is the main (UI) thread
and using it on AppConfig::save() to assert if save is called
from a worker thread.
The old assert was using thread names, which did not always work
on Windows.
Fixes#7839#9178#9370#9420
1. when object skipped, it should not be duplicated
it is set to unprintable before arrange
and the plate needs to be considered a skipped plate also
2. skip the wipe tower if not multi-color after skip
3. load default configs if there are no configs loaded
4. refine the result.json to include key_values
Change-Id: I8c132cabcdd78756673fe900267a226a41ae1b4d
1. load the updated machine/process config from uptodate_settings
2. if don't have uptodate_settings, keep the logic as before, use from local
Change-Id: I3520469ab6094f03895b8e0e4e84c7549190f244
1. from small bed to larger one, auto translate the models based on center;
2. from large bed to smaller one, report an error
Change-Id: I7b7fac1e370ff4daca82c4f36977a86fca268625
Enforcers should also subtract the lower polygons to get overhang areas.
Jira: STUDIO-3692
Github: #2045
Change-Id: I70f4aaae13826efc624e9bc942d2d11e9b1df1a1
(cherry picked from commit fc3d9b24ac1eb14e259488c94fca3469f319b368)
1. We have a logic to add supports at corners for tree(auto), now I extend
it to tree(manual) also.
2. Only show support_critical_regions_only option to tree(auto).
Github: #2008
Change-Id: I161444da93464fd2ef0e0f3b40a0c5852beba351
(cherry picked from commit af4efb4aadc2a4d16de3eea881c6610955985fff)
to avoid integer overflow during the polygon operations in make_brim(),
plateoffset is applied during gcode generation. This results in a wrong
first layer convexhull "m_first_layer_convex_hull" which is used in _make_skrit().
This patch fixs this issue.
JIRA: https://jira.bambooolab.com/browse/STUDIO-3719
Change-Id: Icfe21f4dbab05cc9e1c6f668791a62f954c2e0e5
(cherry picked from commit 6286b3e447b7ac7cbc061dca435091094783f74b)
while the newer version of 3mf be load to older software
pressure_advance be unrecogized
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie160759f58e573f8ad01a2941763016e9b070e9e
What: As title. The original code is always apply
at the end of last object of last layer, whichi is before
layer change
Why: the fan spped will be skipped if the last object is
skipped. So we must move the layer time fan speed setting
after changing layer, where is common gcode block and does
not belong to any object.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I442f80e00778b524576210b451f81dd15e25e14c
Only use MCut to do boolean, with a little modification to allow input
mesh to have multiple components.
Jira: STUDIO-3167
Change-Id: I4f53010f76fbcacfe966c2ef48e465f97d6516fe
(cherry picked from commit 92d0eb11744820466ee2f67c02d4764e496b7e60)
when the cached object is skipped
we need to reslicing it;
also do overhang detect for all objects
Change-Id: Ic842fd5a441426983a760145aeff9285e398d430
Previously tree supports are harder to remove than normal
supports. We learn from normal supports and improve the gap between
object and supports.
Jira: STUDIO-3530
Change-Id: I229a7b869b334bdf4c5aba96c9450213b83457f2
As title. This function need to be used in calibration
page.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia4228cbd195d87f433b59bc14129bd4acdd9df68
This is fix for jira-3493
Remove duplicated height pairs when add height range
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If74c1f8af1c911d709b9582a15ea8852630c1a67
brim bounding box is now shifted w.r.t. plate origin, need to modify the
no-brim shift the same way.
Change-Id: Iefa7287e2848aadbfc4a468bca394ecec48a1e7c
1. Don't use mcut on splitable volumes
2. If MCut fails, try again with CGAL.
Change-Id: I55d352b166633db9e4548b5c9e6913cf931f5f8f
(cherry picked from commit c1bde5358524d2291db6efa584ff072308ed9d20)
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
When there are multiple empty layers needs to be replaced, error_msg is
assigned multiple times simutaneously by tbb, which causes problem.
Jira: STUDIO-3320
Change-Id: I52a48c9fe284d15aeb8e4e9e5d1db7e0c3321ad6
(cherry picked from commit fba54c063637a1bab4d835e2e5f8558b2affa4e6)
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
1.store each printer's calibration status to appconfig.
2.add retraction calibration
3.add choose fine calibration directly at flowrate calibration
4.add start pages for every calibration
5.add history window for pa calibration
Change-Id: I117fd46e689e0573e70e8579f5a52ba62d99f3d6
1. When the option is not set, print.full_print_config() is empty, so we
can't access opt_bool("scan_first_layer") or opt_bool("enable_support").
Should use wxGetApp().preset_bundle->full_config() instead.
Jira: STUDIO-3264
2. Allow different object having different brim_width to encode support's brim width.
In this way the arranging logic is simpler and more objects can be arranged in a plate.
Change-Id: Ic7178652147b0519d50b2eb9ceb214b4ef4c0251
(cherry picked from commit 0f163d59b40009cd29b8b1e32f730258ad0786dc)
Do not do final align for filling in bed.
Jira: STUDIO-3265
Change-Id: I2ce2ebed575ba05b1d78ec89923f8e91c4de6648
(cherry picked from commit 581aa4fd0ff1c6f64026d7b934d4bd8a79b803ae)
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
This is fix for jira-1774, jira-2260, jira-2997.
This is also fix for github issue 1821.
Very old issue...And all caused by same reason.
Instance shift are too large for multi-plate,
which causes overflow in 2D boolean and generates
overlapped brim line.
Only apply local instance shift without plate shift.
And apply the plate offset at last step.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I23f7d1ec75c76dea1b4f5332f16ea8a3db14bddc
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
pa calibration for 3rd party printer and retraction calibration
Change-Id: Ifeb12807cdce366c9d265a0490b320224dfb23fe
(cherry picked from commit 732adceeef43c9c957468ab490f0e3ee20f3173b)
Enable label object when does not print with multi
filament and object number is smaller than 65
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id670c6a5258f266076bc0a52c50ab5a28386f242
(cherry picked from commit 40248347908788ce6303ed255826011127d8eaa3)
tbb parallelization is used to improved the efficiency of for_each_volume and for_each_polygon loop
JIRA ID: STUDIO-2866
Change-Id: Id5b3a536e3162b148417cbee803bcede3b62a651
(cherry picked from commit 15a6f7ef2f575eaa4b4694ad357d881b39b82f5b)
If support_on_buildplate_only is enabled, and a node will fall into the object,
this node should not be a normal node.
Jira: STUDIO-3047
Change-Id: I65dc6d69d28729732907111c3b34b4d32edff806
(cherry picked from commit d04dc35d45c171e20899cb391d3b192fa123c10e)
This can avoid to simplify wall twice when
the only invalid step is infill.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie5a9ccc10d5331c29c716aece08cdb195352cfe3
Optimize support top interface fill direction for bridge.
The direction is set orthogonal to the biggest bridges's infill
direction.
Currently, it only works when thick bridge is off.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I7bd894ae6f5ae24bc597c609e27a16b6d45a9797
Small overhang diameter threshold is reduced,
and use bounding box size instead of area for final decision.
Github: issue 1681
Change-Id: Iabbb49dfc47345bb609214749104c808608c4d65
Previously grid infill may be cut, so the strength on one direction is too weak. Now we switch the order at neighboring layers, so the strength of both directions are good enough.
Change-Id: I0ba768eeee34ce430e43ea57d8f06c209d469d39
These two settings is necessary for some
specific user case.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
The print z was wrong previously when there is a wipe tower, or there
is an object with floating parts.
Jira: STUDIO-2719
udesk: https://bblcs.s5.udesk.cn/entry/ticket/show/2258732
Change-Id: Ifa070aeb548d692549cf88df0d405ecdf0160c80
(cherry picked from commit be3097d8044ce9e0079ebf7070b15c7aad7aff0e)
Remove all spaces and special symbols like \ / : * ? " < > | in the plate name,allow xml special symbols such as & '
Change-Id: I2b391d13be709af0e47f1573c0e225e63591fd23
(cherry picked from commit 135c97e9916c852a8625d9d9bf0a4dda051b6e2b)
1. Previously if there are multiple sharp tails in a layer, some will be
missed. To fix this, we should not skip if the current layer is already
detected as sharp tails.
2. Do not mistakenly detect sharp horns as sharp tails by only detecting
the overhang areas larger than half of the extrusion line width.
Github: #1578
Jira: STUDIO-2659
Change-Id: If7ba5c9ae547d3051551aa6fa34eb6214d01a46d
CGAL to 5.4
TBB to 2021.5
OpenVDB to 8.2
Change-Id: I08992fce104e6f56001643c3c5dbf6c3f59ffc3d
(cherry picked from commit 1571f176fc37dda1c3e889776e13fa49bba4ae42)
Multi-material arranging is more compact by redefining same_color_with_previous_items:
if the colors of previous items are a subset of current object's colors, or vice versa.
Either of the two cases will not increase the total number of colors of the plate.
Jira: STUDIO-2871
Change-Id: I7cbe0835408d306084490b4849d03bb9fb617d2b
(cherry picked from commit d58702e9c0db54bcd123739298ce6dc03f5ca1a5)
Little overlap of support lines from two objects are allowed.
Change-Id: I738874ee71fc9787abbef764dbad762c76bc5731
(cherry picked from commit a5f7a53dc818d598523149d675fd0310f5d22f86)
This is caused by the inverse-order polgyons after mirroring. Adding
a union_ before offset_ex fixes this bug.
Github: #1621
Jira: 2738
Change-Id: I885a3ca6af4e5fadb2158d913cf67525bfffa91e
(cherry picked from commit 4ea95d89e7ec058ac21218e1839cfe16b486893a)
referenced OrcaSlicer code and support for Chinese textures，chinese xml，limit plate_name length,Code decoupling,wxColour use Local Variables
Change-Id: I6434b90efb2f90235527c7dfb3a7ed516ac2cf4b
(cherry picked from commit 0ecfefb0e1cfccbe73b0fcc530e04e6405ecf68a)
sometimes the root mesh is loaded after the shared mesh
we need to treat the shared mesh loaded at first as the root mesh
Change-Id: Ibc6f6a07c5069f3dc9471a129c2f434b48f486e9
In normal support, contact_polygons were slightly larger than allowed region, so sampling to the wrong points, which were then removed when "on buildplate only" was turned on.
Jira: STUDIO-2742
Github: issue 1352
Change-Id: I2f131bac48eb30997f37818f312da3386516a5ea
(cherry picked from commit ed25a89c0e8c5358ea803344fbce482be172d2ee)
This reverts part of the commit d4490af, because redo slicing is unacceptable after changing support params.
Known issue:
Bottom surface type depends on support parmas, that's why we add the steps dependency of slicing against support params in commit d4490af.
With this commit, bottom surface type may not be right with the initial params, and the user can't do anything to make it better.
Change-Id: Iff079c4d1205b8a07468be6396990fe87634a3fe
(cherry picked from commit c663a844629c07dd40973832df4e4d1e1827235a)
1. Instead of smoothing top-down, now we smooth tree branches bottom-up, and do not stop at merged nodes.
2. Fix a bug where some nodes don't have child. This is critical for bottom-up smoothing.
Change-Id: Iac0fecd81dac541ca390bcf5cbdfe7fd66cfd3a2
(cherry picked from commit 536a8a4f0ef76fa0358f4b4b181c4c7e7fff8bc7)
We increase the smooth iterations from 1 to 50.
Change-Id: Iba883fd67d7a9a71c92b364dcc9b76e00fc45820
(cherry picked from commit 945fba20a5629148bfd8cee47f492d42c50f9824)
Tree Strong is too similar to Tree Slim and people don't like it.
Jira: STUDIO-2660
Github: #1579
Change-Id: I52d7e8e674f0fc332e4ab2813261ffbc4b4cfb7a
(cherry picked from commit 9eb209b4c1737d2f10b9b8bd78c9f876f3d32bce)
Previously we assume the NFP of exclude regions are rectangle, which was
not always right. Now we calculate the NFP and find a best new position
to shift.
Change-Id: I02c075603cf71dd3c9146d7ac7a6706c0f850669
(cherry picked from commit 713ebd666c90d5dcfaf89914c37d211e9a470e99)
tan(90\degrees) is too large and will make detect_overhangs very slow.
Jira: STUDIO-2620
Change-Id: I55901a6bc1b56216549f66e1a7e77c0da680997b
(cherry picked from commit e58cc8a4665808580e84107f54661447000d64f3)
1 limit the range of setting
2 avoid too dense points when fuzzy skin enabled
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6691fd03d2aa960b055b68100dfb338b640cb4af
Use a more accurate way to estimate wipe tower:
1. read wipe configure from front-end (the positions may be different at
different plates).
2. when depth is unavailable, use all materials to estimate depth (the
estimated wipe tower may be larger than the actual generated one).
Change-Id: I42ffd03d9817b57f5023a6820cda0032509c6fe5
(cherry picked from commit 77ba9757023afb9160c996eeea6ead8a27b50ce4)
grouping of volumes in the slicing process, which will be used by the brim generation processes,
is moved to an indivial function from the fixed_slicing_errors function.
Change-Id: I241081823a671829d8cc4e923da5f6f22776c410
(cherry picked from commit 18a7b541ee48f3c01319d5835c05610c3d8ca0ae)
Cantilever detection should be done layer by layer, instead of using
merged_poly of clusters.
Jira: STUDIO-2198
Change-Id: Ifea017fc4c13425a944ee80f7dedb603a8e14cc2
(cherry picked from commit 0803a439a458ffeb9c6d91e90344a5b78794a6bd)
If an object has only one empty layer, error will encount
during grouping volumes
studio-2602
Change-Id: I25871b8cc8e4772c347c615db346875a9658db71
(cherry picked from commit 78b7e7706f6c8e7e86f4bd2e8daab7036499ced2)
1. cache the first layer group cache data for brim
2. fix some crash under debug mode when app exits
Change-Id: I81d716564af414353e9dfeed42e5f4eef08b2d6f
(cherry picked from commit a6ecdaed6f63f1c5c41fd343f72165fe27fda9d3)
1. Only draw infill in normal nodes of hybrid support.
Previously when hybrid support was selected, all nodes would have
infill including the circle nodes which don't need infill. Now we draw
infill only when there are normal nodes.
2. Move remove_bridge after small overhang removal because the trimmed
bridge may be detected as small overhangs.
3. Only split circle nodes in draw_circles to prevent floating circles.
4. Fix the issue where tree support infills may not be aligned,
which is caused by the changing spacing of filler.
5. Fix a bug where lightning infill in tree support may crash.
Note: it is still not prepared to set lightning infill as default,
as for some models the generation time of lightning infill is still
too long.
Change-Id: I556e5097041d09afae1e2957d4dc9914d4610149
(cherry picked from commit 4c0849a81b60cde0c3b8ca54f03f63ea7c62dcd9)
1. Fix sharp tail detection in normal support.
The not operator in front of overlaps was missing.
2. Fix bridge removal.
After adopting Prusa's smart bridge direction detection, the bridge
angle may be pi, so our previous method (comparing angle to 0 and pi/2)
was not right. Now we simply check if the bridge direction normal vector
is aligned to x-axis or y-axis.
Change-Id: I4e1fd937e432aca97cdd374ba66a0d869794126e
(cherry picked from commit c0d82003a5e4c44345219294072c54051fc5711a)
1. improve sharp detection for small regions.
When the region is around 1 extrsion width, previous method may miss some sharp tails.
Now we reduce the width threshold to 0.1*extrusion_width for sharp
tails.
When checking "nothing below", need to expand the poly a little. Example:
benchy.
2. improve is_support_necessary.
Only popup warning for sharp tail and large cantilever (longer than 6mm).
Jira: STUDIO-2567
Change-Id: I5e977e7766b35409891d1b41e36278e3f07fa372
(cherry picked from commit c9d8a7c1c3bbd4367c7fc44408c67e5c534167f4)
Also fix a crash bug due to setStarted and setDone.
Change-Id: Ib9b069fe4b7e5d1fc359f48e44b4032dd8249428
(cherry picked from commit 9ef190ed3ecd66d12617ad96e927ff34251395a2)
Allow user to set top/Bottom_z_distance under variable layer height.
Fix the bug STUDIO-2454
Change-Id: I026098a4df7cfa01f87a6802e2c787fcfd6df3ee
(cherry picked from commit 6e933acec7cde705f176937038ce307bc276cf5f)
Re-open this option as requested by github users.
Fix Jira STUDIO-2083; Github issue-1102
Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
1. add gcode conflict checker
2. add a new command line option: --no_check. When it's provided, gcode
conflict check is skipped.
Change-Id: I6feafca8c5fa6c3c5eae1f0e541ce59d2f03dedf
(cherry picked from commit 5a39afb64e826a960d9673dcada89d02d62b3911)
1. old 3mf judge logic improvement
2. some 3mf doesn't include gcode and geometry, treat it as empty
project
Change-Id: I9b3f3d04e32ae6ff273ec1ae04c04ac6329487f0
the processes are parallized via tbb
the patch 12311 ENH: remove trim_overlap should be used
Change-Id: I226dc171daadebd81b8d3ae013b08c71b91fb392
(cherry picked from commit eaa2e7997a59f43175d5af430269127471e40cbb)
Similar to tree support, make as many steps parallel as possible.
Jira: STUDIO-2525
Change-Id: Iee310bbf6911d8d3e4262ee8ed6bd133d09670a9
(cherry picked from commit 3798f1a3ecb85bbfb81925b3702fb4384e18994d)
1. tree support style default to Tree Hybrid
2. fix an assert bug with MedialAxis::build:
assert(polyline.width.size() == polyline.points.size() * 2 - 2)
This is caused by the incorrect clear function of ThickPolyline.
Change-Id: I8d6507ad366d253493e2749e0cbac8d3d837ee8a
(cherry picked from commit bd31e962c11e82005944bef40b17471075e79898)
1. Parallelize the majority of overhang detection, leaving only a small
part of sharp tail detection as sequential. This strategy makes
is_support_necessary 10 times faster.
2. Use the overlaps function to detect overlapping, instead of using
intersection().empty()
3. Control the max recursion depth to prevent crashing due to too deep
recursion.
Jira: STUDIO-2445, STUDIO-2458
Change-Id: I35283da3e4a22d7afe251b804ce30b90a9d754df
(cherry picked from commit 1a6fedd1a0c82906f1807234ea1b816247ca6fd7)
Fix for floating layer under multi-color
printing while z_hop is zero.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8cc96bd18020cac8424fe4c3e62fb87da118b826
This is fix for STUDIO-2079 that slicer may hang
when generated archimedean chords pattern lines.
Thanks prusa.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I923c1ef48f093b2ab9576cb04beb4787c903ca00
offset may give empty results.
Jira: STUDIO-2452
Change-Id: I4da9689dc3e22afcb2340ce0f9956237e4aab434
(cherry picked from commit 3f33979a79c720fcaddb5b850ec278b3deaf2417)
Don't know why this file is missing when cherry-pick...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iddfba50ef885fa08078bb9723a6ae2d5d5d0289d
1. add top view thumbnail for each plate
2. add picking thumbnails for each plate
3. save model object id for picking
Change-Id: I1d7f6ade22726ff12c282cb12e4a78e6b444a070
"std::cout << float number" is unsafe which
may use , as decimal point when switch language.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8a379117168eab0111dc93987b1d6130a741ade6
1. In small overhang detection, some sharp tail cases are missed because
the max_layer was not compared.
2. In normal support, previously the lower layer's expolys were not right,
should only keep the ones that won't vanish when extruding.
Jira: STUDIO-1977, STUDIO-2200
Change-Id: Ia09ff1ab4870b7e3c199a827932536867644c76c
(cherry picked from commit e3ba3a3114821e951d6eb00b4c95e6e63ffe00d4)
Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.
JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)
1) the function is not released to public
Change-Id: Ia1b5a31db3b1b1864997b57fe875c01f3ea9fb08
(cherry picked from commit a816cc313659f87978e1275b98f43172cb416a59)
The tooltip of brim type contain messages of inner brim,
which is not enabled in the current version
Change-Id: I155a16cc4331cb0b5b54d29f6be1de6c82819e0c
(cherry picked from commit 1fe773438e1697b8a0b9817a885b13e7e4fae097)
If the three points are in a straight line, let the middle point coincide with the first point.
Change-Id: I32e5a1e1f5f217f9db9766d698590e758f334ca1
(cherry picked from commit d8771943bddf80e23dab5e9fa841acb7e24e873d)
This reverts commit 9e026a289542545d5f63cd72fb9416be1521ecc2.
This Revert "ENH: STUDIO-2221 adjust cooling time for each layer"
This reverts commit eb1fa5975eb7dc3ff832539e9bec5a04515ff2f9.
Change-Id: Iba8d0a1492b81922aad0d64df81c74cff5eabbb3
JIRA: studio-2274
Now support enforcer on vertical faces function is invalid. Previous
enhancement of support enforcer on vertical faces brounght more conficts
than benefits.
Change-Id: Icbb0df3995d8ac8b3c22dda1bd4615da78af963b
(cherry picked from commit bca003cbc35791838484afe4032276be8fa91db0)
This placeholder will be used by start gcode
to avoid calibrate support filament which is
the first filament.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7c8d206346bf3d3a5325c06abb24c58834f7f505
1. use tree slim's merge strategy in hybrid support
2. do not break bridge in hybrid support
3. fix "support on buildplate only" not working. The cause is: with
independent support layer height, contact_nodes are not synced with
object layers, so the previous way of accessing contact nodes in
unsupported_branch_leaves no longer works. To fix that, we add
obj_layer_nr.
Jira: STUDIO-2250
Change-Id: Idfc9b0bb10425de6414f7eae2cf5467cedf1d669
(cherry picked from commit 8780d5a7e92e298cbbccbb3bd1825197d387a340)
sub filament change time from layer time to adjust
layer speed
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I2f1c41a36946765b74ecad58ce102abe98e00dac
now, when XY compensation with negative value is assigned, the brim can be
generated correctly (Studio-2222). In addition, one can add brim to a model whose
first layer is empty while second layer is not empty (studio-1286).
Change-Id: I28443dc6e28bc6fff8c92d3cc35ab7a416d43138
(cherry picked from commit cb62afcfd295ca93962d99350d1dfaf3441c4759)
Previous precision is not enough, and some mesh is not
of good quality.
This is handling for github issue #825
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68901b41c1a3279c61678dbbcc93c887020f18a7
A bottome surface is detected as stBottom only if:
1. has support, top z distance=0 (soluble material), auto support
2. for normal(auto), bridge_no_support is off
3. for tree(auto), interface top layers=0, max bridge length=0, support_critical_regions_only=false (only in this way the bridge is fully supported)
Note:
Since now the surface type depends on more parameters, changing them will trigger re-slicing and making the whole process slower.
github issues: 1253
Change-Id: I0fe719e0dbf7147206008c8726dd9c7be2b19226
(cherry picked from commit d4490afa6b9e4fbb583033a125bbebb50dc5f0bb)
Arranging multi-color objects with disabled
multi_materials_on_same_plate option was not currect.
Previously we only consider the first extruder id for multi-color
objects. Now we consider all extruders.
Jira: STUDIO-2164
Change-Id: If64ff4f88f0fe4f6c31ebf657b3449b19bf063f0
(cherry picked from commit f4f6bdd00a0c3d3e13406b69be9b5b0468b27d44)
1. fix unsupported cantilever was not warned. We need to set support
type to stTreeAuto in is_support_necessary() to fully utilize the
power of feature detection.
2. fix tree support not generated on non-first plate.
Change-Id: I5b8aa827c9d62df0119db4e8e9212f33ce75ddaa
(cherry picked from commit 60f21b6fcb45fe56f7fc867a7fcad433282bc055)
When using "Flush into objects' infill" with support filament, it also get's flushed into the object's infill which shouldn't be happening.
Change-Id: I0f1cb3d5ee3cf5489ccab957989c6c24336f8845
(cherry picked from commit f83e63feb3ad5a14b0f4304e2e6fb1c5828270ec)
In generate_contact_points, the rotated_dims don't actually generate a
Point, but generate an abstract expression that holds a reference to
bounding_box_size. Unfortunately, this goes wrong because bounding_box_size
ages out instantly; GCC's Address Sanitizer complains that this is a
"stack-use-after-scope" issue.
Interestingly, the Eigen documentation says that this is a known problem
with using C++11 "auto" to generate matrices (which a Point is)! It is
buried here: https://eigen.tuxfamily.org/dox/TopicPitfalls.html
This is probably an extremely theoretical correctness improvement, and also
an extremely theoretical performance improvement. But it is an improvement
nonetheless, and, more importantly, it enables me to continue to run the
slicer with Address Sanitizer turned on to find other potential issues.
So tree supports won't go outside the bed.
Known issue:
1. moving won't trigger support re-calculating, so if you want to
clip the supports in a different way after moving, you need to change
the support settings (eg change threshold angle to 31 degrees).
2. clipping with the occlusion region is not complete, and an error
message of "outside toolpath" will still be popped because we use
convex hull to detection confliction.
Jira: STUDIO-2036
Change-Id: I643b14618eb18ffa9825072c44f677e51b0ff937
(cherry picked from commit a6217824dc0f490027e16f80f810d176dec6004b)
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
Support layers should be released in is_support_necessary.
Jira: STUDIO-2120
Change-Id: Id1c6fa2d8635e55be745095408dfbac38a25efa6
(cherry picked from commit f911e8d084c4fa273f8c9211112fa2f83515cfb1)
Using layer z to calculate total layer number is not
precision, because for some models with sharp top
layer, the top layer may be empty.
Check the final layer change in final gcode file.
This must be same with total layer number.
Jira: Studio-2123
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5d001a8bb9548c3fb5f67fda966051ac3bb16502
Merge numerically very close Z values when calculate
total layer number
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I4e60ca69fe5b06b66283d6a763d0b231c3d11b5a
Seperate travel time from extrusion role time and
show it seperately.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Icf0aaf63c4d4ed7d1407037e5ae051d61938f973
the root cause is a mismatch between the dimensions of flush matrix and the number of extruders
Change-Id: I3a4ca706cb24d9e5d33969b9e6f5b288e71bb8f2
(cherry picked from commit 7399037eaacdfd7d8407667a2e5a097757265254)
This is fix for jira 2061
Layer height is double and may has small difference, which
influence total layer number when support is enabled.
Should use int data and consider EPSION when calculate total
layer number.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I1bb6c89f2afd162d2d7e7dcff4a9d6a00b94dab3
This reverts commit 1e95803df3733021e80241ecf7b88976708f0cf7.
Reason for revert: some model test not good, need to update curve function
Change-Id: I6afd6115d21198f60453d4f507905b6684a65cff
Use tree support to detect if there are sharp tails and so on.
Jira: STUDIO-1898
Change-Id: I148e14ca4024849875133a646a8fdd36c265b2fb
(cherry picked from commit bc74015d45e96e409d34d611876e3a24e289e029)
For pa-cf, the default setting of cooling is
forcing cooling for all outer wall.
And internal tester found that the slowing down by
layer time does not work for outer wall under
this situation.
This is fix for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I05aaa16d246f5ea6dc1ae9808050e1281646e184
Tree support didn't fill the first layer when the tree is too short
udesk: 0284
Change-Id: I2702b26733e7360445e19847abb48f75f173da4e
(cherry picked from commit e317f9e19fbbfe21efb495e23a8ff78661bfee79)
Clipper2 doesn't solve wrong line issue for some
specific model and sometimes has performance issue.
Return to clipper1.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I906f8b81083ac8c03ecc9fe3e8d2ade20be95c04
1. async fetch user presets from server (in thread)
2. always load default user presets
3. load user presets from cache immediately
4. not remove user presets cache
5. hide some loading ui
Change-Id: I1d29ed18e09606d0b2f69a69eea2eb5042c26223
Previously we used layer_nr-1 as the next support layer below layer_nr,
which was not right when we used independent support layer heights.
And this would make it difficult for the tree branche to avoid the object.
Change-Id: Ic705fbd093e4bd555470646044380703ca259904
(cherry picked from commit 245e1cf4fd071b1f1fea4c5d616ff87432a76911)
When fuzzy skin is used, it's unmeaning to calculate
the overhang degree of extrusion line, because there
are a lot of random fuzzy point which change the line.
Disable in this case. This can also speed slicing up
when fuzzy skin is used.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia65e20e24fd7a5cd224635fd69a272387135ba12
Brim will be croped to ensure it does not exceed the bed area. However,
plate offsets are not considered and thus the croping does not work in
multi-plate cases. This can be fixed by this patch.
Change-Id: Iffcce6cba23a82de1fdd9fffe8c48c4e303e9e15
(cherry picked from commit 9c53fb12153cc8a31448ae4a670171c495243dae)
This is fix for z hop issue that z hop of
layer change is always spiral list even when set
to normal lift
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7b235a640b0538bedfe4cef61ca24108c1ba7246
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
allow generate wipe tower when print ByObject if there is only one object
Change-Id: I199e9cab7bd7c963edf58e829c663bb91c12f4f8
(cherry picked from commit 7153c30800022f3afb9811c67f88ba28c9b25d20)
even though there is only one color, the wipe tower is still exist
Change-Id: I5c68a4ca7239cfc74aba452a6588d74f6d622f47
(cherry picked from commit 032c2e6718c65aa4c5b18eecd0ccce27f3f489bb)
1. When sharp tail region suddenly grows a lot, it means it connects to
a well supported region and is no longer a sharp tail.
Jira: STUDIO-1862
2. First layer of sharp tail can not be reducible (must have extrusion,
i.e. won't disappear after slicing), otherwise thin spikes at the
top of the object are also treated as sharp tails.
Model: knight_seadra
3. Increase sharp_tail_max_support_height to 16mm
Model: Crane_reversed
Jira: STUDIO-1859 (for this issue I don't what is the exact cause,
but adding these three improvements solves the problem)
Change-Id: I3cd57b184d78dba8862ab3c214057ae78fe49d1f
(cherry picked from commit 9242c6a6d1f23f11ebc43a9049ce10229a15c60e)
Detour travel is wrong in multi color printing when
current position is unclear.
Don't generate detour travel in this case to avoid
colour mixture.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2d24b04d99b8a0b34a46c9f88e522e97cb0fe354
1. Previously we used integer Point type to detect corner, which was wrong.
2. Delete duplicate points more aggressively to prevent too many points
around curved overhangs.
3. Do not generate roof_1st_layers if there is no interface at all.
Change-Id: I1167ac04c533ec8f29dc9e656ba7072d1b54197f
(cherry picked from commit 1329347c4bf9c8207cf21e591a6ad113bb565673)
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. fix possible empty layers (caused by continues walls)
2. fix normal node may be absorbed in drop_nodes in "tree hybrid"
3. popup message to ask the user to select best parameters for tree strong
and tree hybrid.
4. auto select lightning infill for tree hybrid.
Change-Id: I7d172887a9b0e4f268267684e83fc02dc7ec6a0c
(cherry picked from commit bc6d130e86c252d7fc1f84c4df7da95050dd5d51)
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. smooth nodes' positions
2. draw ellipse along movement direction
3. fix a bug of radius not smooth
4. fix a bug of Tree Strong having too large radius
5. fix a bug in plan_layer_heights: when wipe tower is
enabled, independent_support_layer_height is false, and all support
layers should be exactly the same as the object.
Jira: STUDIO-1785
6. move support style popup message to on_value_change, so only show the
popup when the user changes support type or style.
Change-Id: Ibced7a28f436d96000ee35a7194b68bb5a20a32d
(cherry picked from commit 0d814b07e433533c8de1b7a04bf52b577de0778d)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
fix bug of empty layers when meeting similar large layer height of tree support
TODO: hybrid(auto) still has dangling layers at the botttom.
Github#826
Change-Id: I6d5dfa9a610403e51ea82c1d86444f8645dc3210
(cherry picked from commit ea38988f0b5ba22c5b7c3b212d510f649dd23301)
New function plan_layer_heights added for pre-planning maximum layer heights
Previous adjust_layer_heights function has been commentted out.
Change-Id: I8ec5bb7b7e700ed7655d18a17d0b15de5f026592
(cherry picked from commit 55995c138e0375b8055f31768eea1392cd64168d)
If don't do this, laoding old 3mf generated by version 1.3 or lower will
have problem, e.g. normal support will be replaced with normal(auto).
Change-Id: Iaa8e1f8badaacc74479d99a6e4153d8850945279
Add large cost when bed temp is greater than object's vitrify temp
STUDIO-1623
Change-Id: Ib73d312fce7b80999f11d1f6c172a9c1575937b4
(cherry picked from commit aed896d44776c9cd2fd55202420a3811bc117896)
[STUDIO-1717]:
1. Add area filter during finding the orientation vectors.
The vector with largest area will be selected.
2. Area_accumulation function return the accurate normals.
Change-Id: I917e29a0def4904a82d30cf0a92524bbb0da14c1
(cherry picked from commit a79cf2fa89c7247cab37ebd36974529df79f0990)
[STUDIO-1676]:Auto-orientation not OK but manually OK.
When accumulating overhang, the bottom condition should select 0.5* layer
height rather than previous 1 * layer height.
Change-Id: Ide96817b8f98827388b7cb73ca33518b3ff25235
(cherry picked from commit 9f90151236340d3a10790112be65c816dcc3ae30)
As title
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82a17cd8f82a87a898f933b5437836667136d834
(cherry picked from commit aedfffc4565113f186a55efa0e89366880a22fc6)
This is useful and need to be tuned
for some special 3-rd party filament.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0527484d47c1bb9c89d5cc70bbaa34b5078b7e43
when loading third party 3mf, sometimes there is no object name
just named these object to 'Object_index'
Change-Id: Ie73f49ffa79e996114b7a2095de4de7d41bfec24
1. export compatible related values to 3mf
2. process compatible related values when loading
Change-Id: Ib7ed3d165cda5d62e0074652d474567494141631
(cherry picked from commit 989fe6439d573457fa78afc5376d04d3120dbbfd)
For some corner case, the bridge detect may choose the long
distance rathan than the short distance.
Calculate the percentage of archored lines and choose
the shortest length
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia74842f3135681373f649a014c270a1b9d1755e7
It's necessary to edit nozzle diameter and releted
setting for 3rd printer.
For BBL printer, keep it read-only
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I97e32967bb686b7fbb7ac306a2bb7e03b5d8c5c5
1. flush_multiplier will be apply the the flush volume during slicing
rather than only in auto-calc
2. mark too small flush volume as red instead of a warning dialog
3. do not forbidden flush volume lower than the nozzle volume
4. fix incorrect focus status of text input box in WipeTowerDialog
5. check the minimum flush volume based on flush_multiplier
6. limit the decimal digit to two places
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Icdcc50c88ecd9463fb9ce73f996d57c2d9f0187f
(cherry picked from commit 60e01edc511f117b05a8a9b92aaf6fd55325e485)
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
1. don't sort automatically
2. enable the dragging on the object list to adjust the arrange order
3. adjust the object list order after auto-arrange
4. turn off label by default
5. add the snapshot key for label
6. check the the validation of the order
Change-Id: I91461c475cda5335b01a9a608143aa1df31741ab
Refer to prusa and enable arachne for wall.
Arachne also has corner case and cause strange
slicing result and bad quality when print, while
class engine is much better for these cases.
Provide option for user to choose.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ieb3a1c6a457ca610561f8734de4a122d74165afd
Default infill pattern is lightning now, which has
a crash bug when no overhang is provided.
Change-Id: I1e70b8458d1eef670a78d698c68b21d7f48bc3eb
(cherry picked from commit 777af3aa1dbb9869209945f3a6dbcc07cba0b84a)
1. convert instance to object when loading previous 3mf
2. fix an exception issue caused by previous commit caused by nil value of import_project_action
Change-Id: Ieed853f0e8d458aab1716acf52307c5d672ebe22
1. fix the thumbnail white issue in some random case
2. fix the thumbnail not update issue under preview panel
3. fix the previous panel's toolpath not clear issue while switch panel
under preview
4. fix the toolpath not clear issue while switch from 3d to preview in
some corner case
Change-Id: I158eba35e3b5d8a1e77f19ee9f86801e6a6dbd86
For very narrow bottom bridge, it's useless and even
harmful to be printed as bridge. Eliminate it.
This is handling for github issue #298
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I1dc614781a028716a6de59454577f0b7f3b5b1f5
1. Use nlopt and clipper offset togather seems not stable, very easy to
crash. We do the offset outside nlopt now.
2. Fix a bug with finalAlign where objects may be translated to overlap
with excluded region.
3. change the words of support_expansion
Change-Id: I22e37b20e4ae16f47bde206de90845616e4cefad
(cherry picked from commit 1c26e5d2862fd3f3292971b5c749420bfb2cdf0e)
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Should not insert new line in post process
which changes the the final line id in gcode
file
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib8b837cf313a1308260db88bf5390fefe9708cc8
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
When travel in x-y-z move, the acceleration should
be limited by trivector rather than one axis.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If8e5d394cf5d8772d324b9c851c047d9235d9b6b
Add paint-on support on vertical faces of slender rods
ENH STUDIO-970/1285
FIX STUDIO-1183
Change-Id: I36b398f9c1c1341bce080ec3d454dcc6e6f991e8
(cherry picked from commit 65ee2c8d74284b21bfd34a1059e2005998d749c5)
Always draw a wall before infill for 1st interface.
Jira: STUDIO-1402
Change-Id: I9cba46f9bcacbe6c78a82bbb7099cc1d1182cb97
(cherry picked from commit d7381adb78c99414f538db82f0ac1f2de2e968cf)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
1. use face_normals as convex_hull normals instead of quantized normals.
2. The quantized normals will result in bad orientation because of accumulated error.
Change-Id: I8e554905dcec430738135cb8a9f08d8e0fdfecae
(cherry picked from commit 33c474f6f6e7469aed75e981e700e0279cb23de3)
[STUDIO-1079] Large plane not stick to bed
[STUDIO-1437] Model auto flipping bug
1. Changed the orientation threshold so that some tiny rotations wont be ignored.
2. Added flipping detection. Rotation with same unprintability will not be excuted.
3. Added the weight of first layer area to improve large planar face orientatio performance while not influence other objects with small first layer areas.
Change-Id: I1efc9252c90bc053e65cb71e7770cb8d0305cb6e
(cherry picked from commit 1eda67e4fd0cd2536af219e0c225fc08949b5023)
1. change default bed_type to "1" in app_config
2. if old app_config.bed_type is 0, change it to 1
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I9923187ab480b0a4991bfbc13892bfb43b2a990b
support_critical_regions_only may generate wrong supports on sharp tails
Test case: calicat.stl
Change-Id: I73671d9bf0f9c27ef70efa5765cd291761c4d18d
(cherry picked from commit 8ff2ac7ce437dc2f9eee6068d596294c054dee1b)
1. Should start from bottom left if there is excluded regions
2. avoid exclusion regions in fixed_overfit_topright_sliding
Jira: STUDIO-1422
Change-Id: If88ecf86a0485bd478a77df8cfd4942df8ca27ac
(cherry picked from commit a8393de51bd178b731ef4c7201a5fe3247d97a1f)
Add default type to plate bed types.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I26f3a64dba4a19b0d882b828f1ee54c84df1879c
(cherry picked from commit 1ebed465d2b3bcd482dd4ba7a5930b721c79fc13)
if the brim of an object exceeds the bed area, it will be clipped before transformed to G-Codes
Change-Id: I68d700a85e1d28a5e337e53d614266f6e5e0a653
(cherry picked from commit d19ffaa7bdf4b0ab750119d9ef6252491d936f3e)
1. improve auto-arrange compactness around wipe tower
2. do not show "Avoid extrusion calibration region" for P1P
3. encourage objects with similar height to be arranged together
Jira: STUDIO-1364
Change-Id: I5efa61a676c453618cdb3915fb98928d07138deb
(cherry picked from commit 571ee0c6d91d8a5f6a60838052f09d49d85f12ed)
The tolerance of orientation filter is too large.
Jira: STUDIO-1375,1376,1382
Change-Id: I794a161e74acbcf2e13c03dcc6e5e51d6b4e1f23
(cherry picked from commit 9d8f838fb06b8c0d4efed3e50d33db410efae360)
Wipe tower is needed if support base and interface use different materials.
Jira: STUDIO-1336
Change-Id: I006ece952aac1a0f0a57721c2cd1b52b2ceee28a
(cherry picked from commit 1a387e4b1607dee36f5abe499892f027e244fbeb)
1. only show label of object in current partplate
2. disable label under gizmo
3. fix a issue of label not updated in time
4. add some logs
Change-Id: If20196a566cc45a4a0c2bcc6bbe212aaa9f74dd3
(cherry picked from commit 3e92ed61e9687d5351a9bb2bc6d25b568cd1c973)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
1. parallel load object files
2. only load object used by some plate(cli)
3. improve the loading speed when generate objects by using reference
Change-Id: I2719651e715f2e35326e760c4b7cdb3114f54992
I improve the cost function to align big item better.
JIRA: https://jira.bambooolab.com/browse/STUDIO-1221
Change-Id: Id5a16c127ec51bf7463e331058cb1a8f78b764ca
(cherry picked from commit 39773a901df82081c7d9d089807a52aa09e6a498)
if the region is top surface as well as bridge
use bridge path
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia23910e4c49daeacf12d2f40d21a7ca319ddcfb7
1. support bed_type for each plate in CLI
2. don't render the calibration thumbnail under CLI
3. fix the plate box not generated issue
4. refine the slice_all button's status logic: from all slicable to one slicable
5. fix serveral issues in multiple plate's switch and slicing
Change-Id: I6193a799da0367068169ce315d1fcc9098357fd1
1.recalculate layout of filament page
2.add fan speed and temperature page
3.fix that value of time and percent too small to display correctly
Change-Id: I5d0cfaea03aa6e9286fe2d7243de7dd413fe7982
when support material is used in first tool change
Change-Id: If06459b8404fd599b42187859f476efded57deba
(cherry picked from commit 71f9ed69a3eff4cf3139d04a76176f798a1e1e0d)
Add (manual) to normal and tree for better understanding.
Change-Id: I6d39764a16510707912dfdeb80787d63a6e5ad96
(cherry picked from commit 46a0e9a1bb5da747f7d8c90a9235ae59ddf68bc4)
Add back even-odd mode to support slicing 3DLabPrint
airplane models
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
1. return error when there is object partly inside the plate;
2. add the status callback for progress indicating
3. add the version in help
4. fix the return state of validation from 1 to -51
Change-Id: I716057bd5b28a4beb2871614b94708a0860af1a2
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
the print object updating is behind the .normalize_fdm
which will cause some issue in corner cases
Change-Id: I57e9e7aa2acff81b89aedd95ffc7a7effb76cc6b
1. reduce expansion of exclusion regions
2. expand extrusion calib regions to let them touch bed boundary, to
greately simplify auto-arranging with avoidance option on
3. improve dist_for_BOTTOM_LEFT to allow objects be put left to
exclusion regions temporarily
4. improve on_preload for better handling objects around exclusion regions.
5. improve debug tools
6. fix a bug with wipe tower estimation (don't estimate if wipe tower is
explicitly disabled)
7. use larger y-overlap threshold to estimate rod height confliction
better in per-object print ordering (now we use half the clearance
radius)
Change-Id: Iab29d47a072d8515f28a09855432f92fcffa8c5f
(cherry picked from commit 3a4f242a3a6fd2f82dcc8306cde4d1cb107a5099)
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.
This is handling for github issue #340
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
When fuzzy skin is enabled, show more related settings
so that user can tune.
This is enhancement for github issue #44
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I35e3883983b62117c4306dd894a04edd40c70f8e
We discover a good quaility interface can help remove support. When
enabling interface, directly generating circles from overhang polygons
gives fairly good quality.
Change-Id: I5d347fa7abaacea839650b6fd3a8c2c73abd5e56
(cherry picked from commit 474cbf7d59beda63e9ef1ec8b52636f2674811c7)
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Some sentenses are only slightly different which is
unnecessary. Making them the same can save a
translation and also keep consistency.
Change-Id: Ie59c0bf788a31ee0c6a0d792af7b3d532fe34f75
(cherry picked from commit eb69195569518e3be61e5a8887ea317fbe3e7302)
The first layer order should be outer wall first,
when the object indeed has brim.
So must regenerate wall when switch to manual brim.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I44fd0686b7a0e836337f5e6ff8ee311ea0c7bceb
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
This reverts commit ccf1746530a6f68d38a9b6714e70a0acdbec5b8c.
Reason for revert: multi color printing has problem
Change-Id: Ibc53b99a715b987ee447d7c3b03407de2790abaf
Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
This may cause tall objects be printed before short ones. There are two
possible solutions:
1. do strict ordering only when y-overlap is large enough (the one
chosen in this commit)
2. when considering vertical collision with rod, the actual expansion
can be much smaller (because the rod is only slightly off extruder).
But this solution requires an extra parameter. Let's hold it for a
while.
Change-Id: Icc9a4796d49dad93cbcc20d4103e641a48886e5e
(cherry picked from commit 6a958b1fa9e58e4ca3be63b4918da77bcdc53314)
(cherry picked from commit ceff67789c27ea576afd663a2e5bae9a10241728)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
The original patch can't fix empty layer issue
Revert.
This reverts commit 152a650fb80a84523e977b15f5f30d28837d80e9.
Change-Id: Ib6d47ac981fca24ca953b45068703bbcd231cf95
Copied objects share extrusion paths but they should be treated
seperately.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I891c70d261a2fa5b198ec776694d74eeb8fd987f
Revert "ENH: save uniform scale to an app_config item" Revert "ENH: do uniform scale if uniform_scale is true"
Change-Id: I069baecec143e77d796247f29cd5478b877971fb
(cherry picked from commit c7cf95cf5c365f314a53fead6612fac84a0a5f71)
This is a bug when printing multi filament
When the filament changing is finished before printing
first layer, the temperature should be resumed to be
initial layer nozzle temperature as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82231f8a47fac1995d8f1ba12c4f7797afce2891
Copied objects share extrusion paths but they should be treated
seperately.
Thanks hisptoot for the fix.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I24d3050df7d284e92fc50a0213023a43ee8c529c
Add paint-on support on vertical faces of slender rods
Jira: Studio/STIDIO-970
Change-Id: If280b570a8076059b5583f385ba6517bf305723b
(cherry picked from commit 6832ee98ac146421c061fa90840c2751c3b3d875)
Root cause:
support_floor_layers_above is not properly set,
so adjust_layer_height() fails to detect extremes,
and then deletes the middle layers.
Also reduce max_bridge_length to 10mm.
Jira: STUDIO-1084
Change-Id: I1e72a0600ec7e2b812705e45b47b76189152daac
1. fix the prefer_model issue
2. when a printer is visible and no filament is selected, just set its default materials to visible
3. add some log for shutdown debug
Change-Id: I599dbd9c8b180c944ff4086c7638267ff002f94a
1. create user folder if not exists
2. add a tips for binding a printer
3. fix sdcard tips
4. modify icons
5. refine layout of task options
Change-Id: Ic0529cf1e8bdde0128052bc42454f6e6aaae87ca
Signed-off-by: Stone Li <stone.li@bambulab.com>
Add bed temperature checker in gcode processer. And
save slice warning into GcodeProcessorResult.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iee96e4ab165a3171a5a1e165450bfc360401647f
now we save volume's matrix seperately,
so we don't need to adjust the vertex order anymore while saving to 3mf
Change-Id: I71b865c44f0d99e2e88e34cd253fcfba583f345c
empty region after adding the modifier cube
this fix for STUDIO-1025
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5ed35b54f8ee9d2fdc387d1b4391021e4e82aaad
Provide related two options to avoid crossing wall
when travel.
This is handling for github issue #106
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I127adbb70f33c3954a08f3087e64c4e75212c7f0
Lighting infill has not been enabled on this branch.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3c8d1f57fd36e73eaec190a43bf9f5868667d9b
Add custom gcode back, which can be inserted in
gcode viewer layer slider.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
Sync some code change and fix from Prusa.
Thanks Prusa.
This also can fix github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If6993e0149733ccf85ed85f82553caa03df7ac60
Thanks SoftForever for your works to support
sending a gcode file to third-party printer
Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>
During filament changing, additional cooling fan may
be closed to reduce strings. Force to resume after
changing filament.
This logic is same with part cooling fan.
So no side effect.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I207c8692dbe5b0450ed0a3d11c4c9b70eda0e28c
Too large margin for bridge will cause overflow for
shell model. But too small margin for top/bottom will
cause infill area discontinuous.
Using different margin for top/bottom and bridge to
make a balance.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9ba8388b85b978ae39caf2df04f96c704b5d2e05
As title. Make calibration to use printing acceleration,
although no-using has no influence on calibration.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I98cb791c1e0fba6b77360b60567c29511cff75b8
When the model has no overhang, user may disable overhang
slowing down.
In this case, it's unnecessary to calculate overhang
degree which make slicing slow when model is complex.
This is improvement for github issue #331.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2eaeca3ee4068f76709fe97535bbf05c0d27c062
1. hybrid(auto) on_buildplate_only option not working correctly because
parent is not set.
2. tree(auto) on_buildplate_only not working correctly because unsupported
branch isn't deleted completely. I add child to track the dangling nodes
and then delete nodes with no child.
Change-Id: I24c69a7cf400d2961b22a720a6069cf95db6c1a5
(cherry picked from commit bce77c16128d35c668b175e7135b9fe9acd71d13)
Find some problem for the change of bridge, revert.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib195a9b4425fa54408bcd3842bbafc41a3c79409
1 move thick bridge from support to quality page
2 Fix the issue that some times the external bridge angle
is not the best, and the bridge line is not the shortest one.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie26570fb289898f6b62960f9333e79aa92c08ae4
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
This is fix for crash issue for some specific step
file, which generate empty mesh.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910e3d2da670b623570665265a12361492bd706b
1.show flush of every filament
2.modify first-layer text display
3.show time in seconds when time cost < 1h
4.forbid add-filament when print by-object
Change-Id: Ib8a94b9f620797e367bfc9e8a33abd5d7ab648ec
Enable arachne for concentric pattern by
referring to PrusaSlicer
Also remove useless pattern we added.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie2574f7fc4751ebdf1caab4de52013f3101e104f
This is fix for github issue #216 that
sometimes the infill layer is empty.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie3be08b75506e48f5ae9dd6aae2ae729ba666e01
the max length of linux's thread name could only be 16 bytes
bambustudio_main can not be set by pthread_setname_np
Change-Id: Idab83896c81787b32f6a4dde869b101da1d69e5c
add tips when both print by object and smooth mode are selected
Change-Id: I13f4cc14f2ff7c33c23dcd1708fdb784aef5afa3
(cherry picked from commit a0bfe48df21d4eecf105d41387838f14b22fff3c)
Fix the issue that the first 2 layers of prime tower are not generated
when timelapse is set to smooth mode. This issue only happens in single
filament printing.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
All extruder offset should be extruder_offset[0] when
it is single extruder multi material.
Add handling when load config from gcode.
This is fix for github issue #213
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia881b2bfbbdffa98e3c3db7b35201dc86b520b29
keep only one repeated opt_key when old software open new 3mf file
Change-Id: I4f35d2f15e0cb9e5fa4a7523cfcba7b601afd795
(cherry picked from commit a25c42f31437b4562b8fe71a836a421c014c6cf9)
1. memory explosion when enable timelapse.
2. Models with only one color become multicolor after slicing.
Change-Id: Iab3ace70c08d03ab612158d52ff67eef8d5bc718
In current studio, a brim area will be ignored if it does not be connected to any object island.
After patching, a brim area will be ignored if it does not connected to any object island and other brim areas.
Change-Id: I1aef5cd1af12cf76746f7614807aa03956d625ad
1. unsupported sharp tails and large overhang have different messages
2. do not popup warning for total area (only warning for one single
large overhang)
Change-Id: I153e559915a92c6676468539cf619dafe915f997
(cherry picked from commit 67b593150f8de847d9b1999bf0d7a549eb1ef154)
1. fix a crash when loading a 3mf painting with color idx larger than 15
2. fix the facets not display issue if painted with color 15
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Idb53b6bb2d3665412815222ab9a1d47948afed56
1. fix sequential printing tall objects. Now the print order is not determined by auto-arrange,
so wee need to add a new rule: lower objects should not exceed height_to_rod.
2. sequential printing is better centered.
Change-Id: Ic320722654f0335d2589060fa14c71a5aaa3f571
ConcentricGapFill pattern was used for internal narrow
solid infill. Use arachne engine instead to remove
gap fill inside the pattern and improve the extrusion path
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I758d7c72eb71cc37026b7cebf746cc345014c3f5
(cherry picked from commit 0b6bacd21a091afc13d7b36a69e5b10f155bc6f8)
display hms msg in HMS tab of Monitor
Change-Id: I4df1c63b104463ba62cdf7eb079a540a4176f8c5
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit f4635d18f3383e70177536dfbe5edf2e1370b746)
filament_max_volumetric may be 0 which cause zero
flushing speed. Add protection for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I866b9d97c9c6d97122a4a2beaf508ce9c72ee3b2
Requirement from user to set filament_start_gcode
and filament_end_gcode. Set these two settings to
advanced mode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0d8ddb394b37614d0ef0f10f8434553cb20e9ffd
In auto brim mode, first layer of common support may be apart from object island, which is controled by support object distance.
if support object distance is lower than "flow width + brim_object_gap", the brim will not work.
Therefore, if first layer of common support is interesected with object island, the distance will be brim_object_gap in auto brim mode.
Change-Id: Icbb98af8fd9e84e3ac1977794ca2b60629dd53dd
1) if an object has a slender footprint but its height is small, brim will not be generated;
2) two volumes are treated as intersected if their distance is larger than 0.3mm, instead of 0.8mm.
Change-Id: Iaf7ab644ba9bcc1a8d404acd455f1d8b57e1eb91
0. disable arranging selected
1. fix bug where brim is not correct.
2. fix bug where big circle objects are not arranged properly
3. disable default enable_rotation
Change-Id: Ifc69f35d900ff63ec1e9ec8bf8638afc6ea7d54b
(cherry picked from commit 2ed1b0dd8573a1e10aaf77f0d9f8896cef304427)
Disable the spacing adjustment by bounding box before
fixing, to avoid overflow in some cases.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I13c751c8d46040156d79c1fdfc513f22f5e40fe2
bbl cloud can not parse character '&’
use xml_escape to convert to xml format
Change-Id: I9a2c0abb3c80c26be6f3add507c133f72b2bf7d1
Signed-off-by: Stone Li <stone.li@bambulab.com>
when logout, if the preset selected is still there
we should not select it by force, which will cause the edited preset cleaned
Change-Id: I930cfcb04eae7473f6bc5f037d26b852013b6f42
Filament type of Bambu PA-CF in RFID is PA-CF.
Change it to PA-CF as well in preset to avoid
failure of AMS mapping.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic6b6269123d59863fea2b7d262a124468c95b8af
As title. User can delete the value to enable 256x256 printable
size
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia10454b7a7a1b28c04d8d41df9f3251875f6e74e
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
Stone Li
xun.zhang
chunmao.guo
Lukáš Hejl
zhimin.zeng
wintergua
tao wang
zhou.xu
slynn1324
Arthur
lane.wei
maosheng.wei
manch1n
Kunlong Ma
igiannakas
wenjie.guo
qing.zhang
PavelMikus
thewildmage
salt.wei
Scott Mudge
Merikesh Dev
Vojtech Bubnik
梨子
yifan.wu
Jianjia
MusangKing
tao.jin
Joshua Wise
SoftFever
SoftFever
Zhaofeng Li
shuai.liu
‘shuai.liu’
xiang.zeng
xiangdong.yang