1.Add "in_head_wrap_detect_zone".Detect if the model projection enters
a specified area.
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6aed5a782d2f33f023bdc19cf06dff0957828eeb
1. set wipe tower position to default when duplicate object
2. add cli_safe check logic when switch printers
JIRA: no jira
Change-Id: Iebe62f8be6acd6f44743abf3b0fe92ec04c94197
Now normal support also uses this option, so we can't default it to 1, otherwise normal supports will be too hard to remove.
jira: none
Change-Id: Ic5700af5c17e3a7b265c8915f28b0db35c6e06e6
(cherry picked from commit 6b84a9826da108b76569e686bd9def0b23ae29fd)
1.turn on MC board fan by default on P1S
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5b2f7868e350942fb8b7baf7d429e22a0987184a
(cherry picked from commit e866a575b6b7d9552f7412f84272f4b48dfc3961)
1. Modify texture bed temp to 65
2. Modify max-v-speed for ABS
3. Modify some params in Generic PA
4. Modify PLA,PVA params
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I42584a6015b8526f6bbb93024316968198bd76ce
1.Modify the PEI bed temperature of PLA Basic, Matte, and Tough to 65 in
A1 mini. Set the bed temperature for the first layer of Bambu PETG-CF
to 65 and 70 for the other layers
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia902bbb7f824082d5346709d781cac64296f47a8
Many params are not right.Just use default
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5c4a1e8b046940e174f5681a79031b5f20fcafc5
Can not see obvious eleplant foot after printing
JIRA: None. found by self test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5993b3a2dbb6f4f6a6b8a1714654f1213e4b90f2
1.Fix the problem about first layer can't set temperature
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id4087ba789fb6127d8a1ad75ae518aaffa05815d
1.Modify generic PPA-GF max v speed to 6
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I18cfdcb9037b9d9fda6ec60d12c6057a5f9e9bd0
1. Set max volumertic speed to 11.5 for PolyLite PETG
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5ee019d07124870893df9ab636851adc0f2a6425
1.Optimize the heating sequence for the X1E chamber
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I22650b71961218b32247a84eefb9bf8dc5dceeb7
1.shorten prime line and change x axis freq sweep
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3582f7fb17dfa173f33ad74f49d7d2b70036df5f
1. Remove some keys with tree support
2. Modify thin_detect wall and adaptive_layer_height
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie342c27d4dcd2a262993e472a203ce92da14dbb2
Add more photo shoot comamnds in the end gcode to prevent sharp ending of timelapse video of A1.
Also fix a bug of using timelapse_type=2 in end gcode.
Jira: None
Change-Id: I2a426be7a2f7d22b10b79c2b7eb1a04538b5340a
qing.zhang
xun.zhang
lane.wei
Dmytro Chystiakov
Arthur
salt.wei
Catalin MARINCIA
maosheng.wei