d47d82bf43
ENH: add preset for ender3 printer
...
As title.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2d9b1aaeadfe945a6a90f34cdb10a1f240a50ae4
(cherry picked from commit a223ab23605c3ef96ae878b9c4d2199520b4f201)
2022-10-20 19:34:37 +08:00
ccd7b7fd7b
ENH: modify default value to support 3rd-party printer
...
As title.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id8be38a23e4fe4c19eb255ffb7cabf1befeae85b
2022-10-20 19:34:37 +08:00
efec8fef2f
ENH: move extruder clearance settings to machine setting
...
Change-Id: Id6d550548f8fb8639349450a4b12c6eef4f441cd
(cherry picked from commit bd4420e4af9626772c90d553bf1f3bb7fd2e20c4)
2022-10-20 19:34:37 +08:00
abddb1edc3
NEW: add support_critical_regions_only for tree support
...
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
2022-09-29 11:16:43 +08:00
5152a90545
ENH: add some pattern back for user case
...
For github issue #328
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iafbb141173f4ebe8352c5247f5de00ee671077e5
2022-09-29 11:16:43 +08:00
6d8887e858
ENH: handle github issue 254 and 286
...
1 add back Aligned Rectilinear infill pattern
2 allow wall loop to be 0
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id2873b9107b7b269466a8db1768dfead9ebdad0d
2022-09-29 11:16:43 +08:00
3e0f26c296
ENH: remove old typo
...
Delete some useless and wrong code
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If103e5ced2c930340e6291a63e2226ecf577f19e
2022-09-29 11:16:43 +08:00
dd1511084e
FIX: fix an adapative layer height not work issue
...
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
2022-09-13 19:42:32 +08:00
4c063a8a32
FIX: modify the text
...
Change-Id: If9d6d629288f9016b5d8abfaff5ee44c99d90e30
2022-09-09 19:59:27 +08:00
a0d4185909
ENH: remove ignore of slice_closing_radius
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I96aa0a07e5e278f0e22f5c2acc5303050ff0cd2c
2022-09-08 21:49:36 +08:00
05625a5e43
ENH: add traditional timelapse without wipe tower
...
Change-Id: I77792fb1a7af2ee95242c6f2501371dc0745287f
(cherry picked from commit f6d434cc8b6c8d11d16bbabf9600c2f2b63868db)
2022-09-08 21:49:36 +08:00
4e1caa428d
ENH: wipe_distance should not to be 0 or negative value
...
As title, fix github issue #220
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If63c839da1341ac2e16bbfa287c4e32564284d59
2022-09-08 21:49:36 +08:00
72221d2760
ENH: add slice_closing_radius back
...
For github issue #182
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I38c69bed03b6d70cb21d58b5f724b4dc3a8992a4
2022-09-08 21:49:36 +08:00
ee16e75a9c
ENH: move overhang fan speed to advanced group
...
Show these two settings in advanced mode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic7ef16ef3a9940d81839cce15de05bf6e32d9315
2022-09-08 21:49:36 +08:00
612204b443
FIX: STUDIO-787 & STUDIO-786 lion face model problem
...
1. memory explosion when enable timelapse.
2. Models with only one color become multicolor after slicing.
Change-Id: Iab3ace70c08d03ab612158d52ff67eef8d5bc718
2022-09-08 21:49:36 +08:00
d9ad79e922
ENH: add back random seam
...
As title. Random is useless in some cases.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I169edb005574c43fae5aafbdbe4b6e901b8d0c74
2022-09-02 12:52:18 +08:00
0ab13a6abb
ENH: Add Textured PEI Plate
...
Change-Id: I08178e86a8ccb23844cca00bc9d265df7507f910
(cherry picked from commit 8f101963ecab1352e2721ead83928b327d6c0dbd)
2022-09-02 12:52:18 +08:00
acb05dcf19
FIX: enhance interaction of timelapse
...
Change-Id: Iac13a485d0f5a458a435137619caddce39ad61fb
2022-09-02 12:52:18 +08:00
ef46654cca
NEW: show cost of filament in GUI
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If28f6e969728fb5edd9cb35d6bc6d0a6c155d96e
(cherry picked from commit a4b8e620794f611c2f94f639cec49ec7c8fe8926)
2022-09-02 12:52:18 +08:00
aab8a12801
ENH: add arachne engine for narrow internal solid infill
...
ConcentricGapFill pattern was used for internal narrow
solid infill. Use arachne engine instead to remove
gap fill inside the pattern and improve the extrusion path
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I758d7c72eb71cc37026b7cebf746cc345014c3f5
(cherry picked from commit 0b6bacd21a091afc13d7b36a69e5b10f155bc6f8)
2022-08-26 09:25:59 +08:00
7fb886a03c
ENH: provide filament_start and end gcode options
...
Requirement from user to set filament_start_gcode
and filament_end_gcode. Set these two settings to
advanced mode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0d8ddb394b37614d0ef0f10f8434553cb20e9ffd
2022-08-08 22:19:42 +08:00
ea7aaf7a8d
FIX: seprate filament_type and display_filament_type
...
special case for "Support G" and "Support W"
Change-Id: I26f873083d6afb58fb10ebc9beef54fbf5e18320
Signed-off-by: Stone Li <stone.li@bambulab.com>
2022-08-05 16:11:42 +08:00
2eb9aea56a
ENH: refine ams mapping for U0 firmware
...
display index of filament
Change-Id: I8a97a71cd334a1536ae7bfd4a5673e9757b2e662
Signed-off-by: Stone Li <stone.li@bambulab.com>
2022-08-05 16:11:42 +08:00
3b6eb13357
FIX: change Timelapse without toolhead to Timelapse
...
Change-Id: Ic32a4a5280bbb5063dc5335463efee35edfbbd6a
(cherry picked from commit 05b4c91fb72d14753f223e9f141fcd21888b92a4)
2022-08-05 16:11:42 +08:00
97ffa093c3
ENH: align the filament type with app/machine/RFID
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I534e6b619efbb7fe6b813bf51640f46066f378c5
2022-08-05 16:11:42 +08:00
e7f379f4de
ENH: change spiral mode to be spiral vase
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3df7e0534c6b8e899c145a1b9ee199eeeaad54d0
2022-08-05 16:11:42 +08:00
89959400da
ENH: separate PA and PA-CF filament type
...
Filament type of Bambu PA-CF in RFID is PA-CF.
Change it to PA-CF as well in preset to avoid
failure of AMS mapping.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic6b6269123d59863fea2b7d262a124468c95b8af
2022-08-05 16:11:42 +08:00
04bdbb4a28
ENH: add cn translations for newly added phrases
...
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I17323af5f6cee8839aa99e4957b9abcf22662f4a
2022-08-05 16:11:42 +08:00
5a2669dcc2
ENH: privide setting option of exclude_area
...
As title. User can delete the value to enable 256x256 printable
size
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia10454b7a7a1b28c04d8d41df9f3251875f6e74e
2022-08-05 15:28:01 +08:00
e9e4d75877
Update the codes to 01.01.00.10 for the formal release
...
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
2022-07-22 20:35:34 +08:00
1555904bef
Add the full source of BambuStudio
...
using version 1.0.10
2022-07-15 23:42:08 +08:00
salt.wei
Arthur
yifan.wu
zhimin.zeng
qing.zhang
Stone Li
lane.wei