1. Enable open support_activate_air_filtration
2. Fix display exhaust fan params when support_activate_air_filtration is closed
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieddba4bb104b6068b5afb4c109ea6b90d7c4045b
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
allow changing the relative angle between the top surface and the ironing.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I85e8ff3d05d3a6d9408da011631e7d71a6d85178
split to 3 mode
not apply
all top surface
topmost surface
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id9bb1a6ded7414b2f093ac01e4ecb4b93057d022
1. when object skipped, it should not be duplicated
it is set to unprintable before arrange
and the plate needs to be considered a skipped plate also
2. skip the wipe tower if not multi-color after skip
3. load default configs if there are no configs loaded
4. refine the result.json to include key_values
Change-Id: I8c132cabcdd78756673fe900267a226a41ae1b4d
1. load the updated machine/process config from uptodate_settings
2. if don't have uptodate_settings, keep the logic as before, use from local
Change-Id: I3520469ab6094f03895b8e0e4e84c7549190f244
while the newer version of 3mf be load to older software
pressure_advance be unrecogized
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie160759f58e573f8ad01a2941763016e9b070e9e
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
These two settings is necessary for some
specific user case.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
1 limit the range of setting
2 avoid too dense points when fuzzy skin enabled
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6691fd03d2aa960b055b68100dfb338b640cb4af
Re-open this option as requested by github users.
Fix Jira STUDIO-2083; Github issue-1102
Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
1. add gcode conflict checker
2. add a new command line option: --no_check. When it's provided, gcode
conflict check is skipped.
Change-Id: I6feafca8c5fa6c3c5eae1f0e541ce59d2f03dedf
(cherry picked from commit 5a39afb64e826a960d9673dcada89d02d62b3911)
1. add top view thumbnail for each plate
2. add picking thumbnails for each plate
3. save model object id for picking
Change-Id: I1d7f6ade22726ff12c282cb12e4a78e6b444a070
Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.
JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)
1) the function is not released to public
Change-Id: Ia1b5a31db3b1b1864997b57fe875c01f3ea9fb08
(cherry picked from commit a816cc313659f87978e1275b98f43172cb416a59)
The tooltip of brim type contain messages of inner brim,
which is not enabled in the current version
Change-Id: I155a16cc4331cb0b5b54d29f6be1de6c82819e0c
(cherry picked from commit 1fe773438e1697b8a0b9817a885b13e7e4fae097)
So tree supports won't go outside the bed.
Known issue:
1. moving won't trigger support re-calculating, so if you want to
clip the supports in a different way after moving, you need to change
the support settings (eg change threshold angle to 31 degrees).
2. clipping with the occlusion region is not complete, and an error
message of "outside toolpath" will still be popped because we use
convex hull to detection confliction.
Jira: STUDIO-2036
Change-Id: I643b14618eb18ffa9825072c44f677e51b0ff937
(cherry picked from commit a6217824dc0f490027e16f80f810d176dec6004b)
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
allow generate wipe tower when print ByObject if there is only one object
Change-Id: I199e9cab7bd7c963edf58e829c663bb91c12f4f8
(cherry picked from commit 7153c30800022f3afb9811c67f88ba28c9b25d20)
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
If don't do this, laoding old 3mf generated by version 1.3 or lower will
have problem, e.g. normal support will be replaced with normal(auto).
Change-Id: Iaa8e1f8badaacc74479d99a6e4153d8850945279
This is useful and need to be tuned
for some special 3-rd party filament.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0527484d47c1bb9c89d5cc70bbaa34b5078b7e43
1. export compatible related values to 3mf
2. process compatible related values when loading
Change-Id: Ib7ed3d165cda5d62e0074652d474567494141631
(cherry picked from commit 989fe6439d573457fa78afc5376d04d3120dbbfd)
It's necessary to edit nozzle diameter and releted
setting for 3rd printer.
For BBL printer, keep it read-only
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I97e32967bb686b7fbb7ac306a2bb7e03b5d8c5c5
Arthur
xun.zhang
lane.wei
wenjie.guo
qing.zhang
zhimin.zeng
maosheng.wei
salt.wei
Stone Li
chunmao.guo
liz.li
wintergua
MusangKing
miaoxin
yifan.wu