These two settings is necessary for some
specific user case.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
1 limit the range of setting
2 avoid too dense points when fuzzy skin enabled
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6691fd03d2aa960b055b68100dfb338b640cb4af
Re-open this option as requested by github users.
Fix Jira STUDIO-2083; Github issue-1102
Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
1. add gcode conflict checker
2. add a new command line option: --no_check. When it's provided, gcode
conflict check is skipped.
Change-Id: I6feafca8c5fa6c3c5eae1f0e541ce59d2f03dedf
(cherry picked from commit 5a39afb64e826a960d9673dcada89d02d62b3911)
1. add top view thumbnail for each plate
2. add picking thumbnails for each plate
3. save model object id for picking
Change-Id: I1d7f6ade22726ff12c282cb12e4a78e6b444a070
Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.
JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)
1) the function is not released to public
Change-Id: Ia1b5a31db3b1b1864997b57fe875c01f3ea9fb08
(cherry picked from commit a816cc313659f87978e1275b98f43172cb416a59)
The tooltip of brim type contain messages of inner brim,
which is not enabled in the current version
Change-Id: I155a16cc4331cb0b5b54d29f6be1de6c82819e0c
(cherry picked from commit 1fe773438e1697b8a0b9817a885b13e7e4fae097)
So tree supports won't go outside the bed.
Known issue:
1. moving won't trigger support re-calculating, so if you want to
clip the supports in a different way after moving, you need to change
the support settings (eg change threshold angle to 31 degrees).
2. clipping with the occlusion region is not complete, and an error
message of "outside toolpath" will still be popped because we use
convex hull to detection confliction.
Jira: STUDIO-2036
Change-Id: I643b14618eb18ffa9825072c44f677e51b0ff937
(cherry picked from commit a6217824dc0f490027e16f80f810d176dec6004b)
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
allow generate wipe tower when print ByObject if there is only one object
Change-Id: I199e9cab7bd7c963edf58e829c663bb91c12f4f8
(cherry picked from commit 7153c30800022f3afb9811c67f88ba28c9b25d20)
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
If don't do this, laoding old 3mf generated by version 1.3 or lower will
have problem, e.g. normal support will be replaced with normal(auto).
Change-Id: Iaa8e1f8badaacc74479d99a6e4153d8850945279
This is useful and need to be tuned
for some special 3-rd party filament.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0527484d47c1bb9c89d5cc70bbaa34b5078b7e43
1. export compatible related values to 3mf
2. process compatible related values when loading
Change-Id: Ib7ed3d165cda5d62e0074652d474567494141631
(cherry picked from commit 989fe6439d573457fa78afc5376d04d3120dbbfd)
It's necessary to edit nozzle diameter and releted
setting for 3rd printer.
For BBL printer, keep it read-only
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I97e32967bb686b7fbb7ac306a2bb7e03b5d8c5c5
1. flush_multiplier will be apply the the flush volume during slicing
rather than only in auto-calc
2. mark too small flush volume as red instead of a warning dialog
3. do not forbidden flush volume lower than the nozzle volume
4. fix incorrect focus status of text input box in WipeTowerDialog
5. check the minimum flush volume based on flush_multiplier
6. limit the decimal digit to two places
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Icdcc50c88ecd9463fb9ce73f996d57c2d9f0187f
(cherry picked from commit 60e01edc511f117b05a8a9b92aaf6fd55325e485)
Refer to prusa and enable arachne for wall.
Arachne also has corner case and cause strange
slicing result and bad quality when print, while
class engine is much better for these cases.
Provide option for user to choose.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ieb3a1c6a457ca610561f8734de4a122d74165afd
1. Use nlopt and clipper offset togather seems not stable, very easy to
crash. We do the offset outside nlopt now.
2. Fix a bug with finalAlign where objects may be translated to overlap
with excluded region.
3. change the words of support_expansion
Change-Id: I22e37b20e4ae16f47bde206de90845616e4cefad
(cherry picked from commit 1c26e5d2862fd3f3292971b5c749420bfb2cdf0e)
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
Add default type to plate bed types.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I26f3a64dba4a19b0d882b828f1ee54c84df1879c
(cherry picked from commit 1ebed465d2b3bcd482dd4ba7a5930b721c79fc13)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
Add (manual) to normal and tree for better understanding.
Change-Id: I6d39764a16510707912dfdeb80787d63a6e5ad96
(cherry picked from commit 46a0e9a1bb5da747f7d8c90a9235ae59ddf68bc4)
Add back even-odd mode to support slicing 3DLabPrint
airplane models
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
1. return error when there is object partly inside the plate;
2. add the status callback for progress indicating
3. add the version in help
4. fix the return state of validation from 1 to -51
Change-Id: I716057bd5b28a4beb2871614b94708a0860af1a2
the print object updating is behind the .normalize_fdm
which will cause some issue in corner cases
Change-Id: I57e9e7aa2acff81b89aedd95ffc7a7effb76cc6b
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.
This is handling for github issue #340
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
When fuzzy skin is enabled, show more related settings
so that user can tune.
This is enhancement for github issue #44
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I35e3883983b62117c4306dd894a04edd40c70f8e
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
Root cause:
support_floor_layers_above is not properly set,
so adjust_layer_height() fails to detect extremes,
and then deletes the middle layers.
Also reduce max_bridge_length to 10mm.
Jira: STUDIO-1084
Change-Id: I1e72a0600ec7e2b812705e45b47b76189152daac
Provide related two options to avoid crossing wall
when travel.
This is handling for github issue #106
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I127adbb70f33c3954a08f3087e64c4e75212c7f0
Add custom gcode back, which can be inserted in
gcode viewer layer slider.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
Thanks SoftForever for your works to support
sending a gcode file to third-party printer
Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
1. memory explosion when enable timelapse.
2. Models with only one color become multicolor after slicing.
Change-Id: Iab3ace70c08d03ab612158d52ff67eef8d5bc718
ConcentricGapFill pattern was used for internal narrow
solid infill. Use arachne engine instead to remove
gap fill inside the pattern and improve the extrusion path
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I758d7c72eb71cc37026b7cebf746cc345014c3f5
(cherry picked from commit 0b6bacd21a091afc13d7b36a69e5b10f155bc6f8)
Requirement from user to set filament_start_gcode
and filament_end_gcode. Set these two settings to
advanced mode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0d8ddb394b37614d0ef0f10f8434553cb20e9ffd
Filament type of Bambu PA-CF in RFID is PA-CF.
Change it to PA-CF as well in preset to avoid
failure of AMS mapping.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic6b6269123d59863fea2b7d262a124468c95b8af
As title. User can delete the value to enable 256x256 printable
size
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia10454b7a7a1b28c04d8d41df9f3251875f6e74e
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
lane.wei
Arthur
chunmao.guo
liz.li
salt.wei
qing.zhang
Stone Li
zhimin.zeng
wintergua
MusangKing
miaoxin
yifan.wu
xiang.zeng