66eb52c018
ENH:check if waiting for sending to end is supported
...
Change-Id: I297778c0e0593bd23b0614c043a3e9878ba61947
2023-11-09 10:09:10 +08:00
af5c58574a
ENH:AMS mapping is supported by default
...
jira:[STUDIO-4778]
Change-Id: I578d8f5867c38e8dd301860bff695fc06751027c
2023-11-09 10:09:10 +08:00
c2b8d2d8c2
FIX: PA Profile Factor K not shown in German language
...
github: 2689
Change-Id: I8d5b874e1304e2ecd984f14fad8ae32f94ea4602
2023-11-09 10:09:10 +08:00
ffcfb4f6bd
FIX: t_utc parse overflow
...
Change-Id: If0358a8458fcd9a79f61b6efe5b4720c5682dccc
Jira: none
(cherry picked from commit f6672805a2d990a77192b14db199e6ff96956bb7)
2023-11-09 10:09:10 +08:00
fdf84c4533
ENH:update printer online status
...
jira:[for network testing]
Change-Id: Id67788fdaa28f5f13483eb06ced6b338994eda02
2023-11-09 10:09:10 +08:00
562f87f550
ENH: add param printer_is_enclosed
...
1.Use printer_is_enclosed to decide whether display a pop up when bed
temp is higher than softening temp
jira: STUDIO-4532
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8602db8815093acded0439336f9a8fee52670261
2023-11-01 09:33:21 +08:00
0c1d536925
FIX: The warning is not translated
...
that nozzle diameter is not supported in old firmware
Jira: 4675
Change-Id: I6045dd33f4821ee7dd11bd8782f8c6f9b2a4010e
2023-11-01 09:33:21 +08:00
31d88ab4e8
FIX:add protection if task information is empty
...
jira:[for new]
Change-Id: Icfdf254eca23022ea3f861168d3894ef866fe792
2023-11-01 09:33:21 +08:00
e7b6615a5f
FIX: [4670] Cloud disabled rating interface, displaying error prompt
...
Jira: STUDIO-4670
Change-Id: Ie571fd042010d5972aaef76063a52b67ef7ccb6a
2023-11-01 09:33:21 +08:00
72dc26150f
ENH: [STUDIO-4579] limit request rating result count
...
Jira: 4579
Change-Id: Ifae6f50b46fc39254ce7c59d0deb1cf1e1940579
Signed-off-by: Stone Li <stone.li@bambulab.com>
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
2023-11-01 09:33:21 +08:00
2ff4173db3
ENH: waiting for printer ack in printing job
...
JIRA: STUDIO-4175
Change-Id: I94c26497979d7ffecebf378a4c4bc244914491fd
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:33:21 +08:00
13dc92363c
NEW:the chamber temperature setting cannot be lower than 40
...
jira:[new]
Change-Id: I1387deb42c60cd9c7bedf115d99f36b0de6f2807
2023-11-01 09:33:21 +08:00
a518467c23
FIX: [MAK-2011 MAK-1988] Fix synchronization issues
...
Jira: MAK-2011 MAK-1988
Change-Id: I411bd185c8cb9f314b74ca91ad5fa303562ed4e3
2023-11-01 09:33:21 +08:00
aa1cbe0388
FIX: [STUDIO-4207] use t_utc from device message
...
Change-Id: I380d10fb14621c3dd6cec5001e298e915f221189
Jira: STUDIO-4207
2023-11-01 09:33:21 +08:00
ca02ea749e
NEW:added check nozzle diameter and nozzle type
...
jira:[new]
Change-Id: Icc6951b861258f367d4f9c1784842965896555e4
2023-11-01 09:33:21 +08:00
aecb5a3a67
ENH:modify the chamber temperature to float
...
jira:[new]
Change-Id: Ibd7e71e8d6e7f43767ca754481ac864c73b98057
2023-11-01 09:33:21 +08:00
2ad11b3ed2
FIX:Color mapping,select the same material
...
The consumables synchronized by AMS are prepared to be set to the same slot as AMS in the disk. However, after initiating printing, the slot value of the modified consumables sorting is not the set material
Jira:STUDIO-2564
Change-Id: I839b10a1b8169091c4e495beb6a15354e436f325
2023-11-01 09:33:21 +08:00
405886925c
FIX:fixed the issue of IP changes
...
Change-Id: Iff87825ae92effa5a4e473d7282c172c6871c0cf
2023-11-01 09:33:21 +08:00
1a24681885
NEW:optimize printer config files
...
jira:[STUDIO-4051]
Change-Id: I77cb16e62546eae63a73f8d12d7f11f496555197
2023-11-01 09:33:21 +08:00
9757ec5fc3
FIX: translate for cali
...
Jira: 4141 4260
Change-Id: I2a426421985c74217d547329b935c8986e75fbe5
2023-11-01 09:33:21 +08:00
37feb7fbfa
ENH:selecting AMS slots with consisten materials
...
When there are multiple AMS slots, priority should be given to selecting the AMS slot that is consistent with the filament idx
JIRA:STUDIO-2564
Change-Id: I9aa208ba24f01ae20913f11c34a7f75a0a2581d5
2023-11-01 09:33:21 +08:00
131161f29b
NEW: support to display wired network for printer
...
JIRA: STUDIO-3519
Change-Id: I1c32254e249a3c0010973b17953121f4aa718f76
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:33:21 +08:00
9f83f6deff
ENH:Don't call the interface when task id is incorrect
...
JIRA:STUDIO-4322
Change-Id: I6fc1dc7379cba0702927e30cab0aa271074c59da
2023-11-01 09:33:21 +08:00
375932aea0
FIX:do not store empty use access codes
...
jira:[STUDIO-3776]
Change-Id: I660533ecbee25409967ab7b4df625d4a53451faf
2023-11-01 09:33:21 +08:00
db6bfca564
NEW:Use new command for chamber temperature settings
...
jira:[STUDIO-4296]
Change-Id: Ic70a6f6dc412cde7f6d9d6361f8646df59df56b9
2023-11-01 09:33:21 +08:00
b281285a2d
NEW:[STUDIO-4016] Support motor noise cali for N1
...
Calibrated motor noise option, N1 supported.
And when none of the calibration options are selected, the start calibration button turns gray
Change-Id: I991034a13001f840016475171c33218ddc812d35
2023-11-01 09:33:21 +08:00
28376584a3
NEW:[STUDIO-4012] support prompt sound
...
support modifying whether to turn on prompt sound from the print option pop-up window
Change-Id: I3206bfcefc9292dd2a7acb7294addc901ad21d4d
(cherry picked from commit ecc13666689d7f644ed3db36088b32b239728779)
2023-11-01 09:33:21 +08:00
642e82fccf
ENH:optimize the display logic of backup
...
jira:[STUDIO-4215]
Change-Id: I89436e88be64cfa9d6ff0c191a1539234917fd9b
2023-11-01 09:11:19 +08:00
3dfe33fbe1
ENH:optimize image config for different printers
...
jira:[STUDIO-4051]
Change-Id: Ibfcbc4c571a5c47eff95891e6f9079c3432e76a9
2023-11-01 09:11:19 +08:00
98a7a10ce5
ENH: get thumbnail from task info
...
JIRA: STUDIO-3975
Change-Id: Ic9ae120673098a4b62c4a00b515558fbef630890
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
042e6bf991
ENH: [STUDIO-4029] sync printer config with cloud
...
Change-Id: Icffee9d5987131e1d78d51ccfcafeefff18f26cb
Jira: STUDIO-4029
(cherry picked from commit 5b58e5f2658753efbf11037f0b6cbb023070c0ea)
2023-11-01 09:11:19 +08:00
11f0fb6016
NEW:add printer arch type
...
Change-Id: I4fedd3df960648d4ad1df32111431ccf126ef120
2023-11-01 09:11:19 +08:00
5857025e8d
ENH: do not change ip when connection name is different
...
JIRA: STUDIO-4072
Change-Id: I6e72f894fa5eca91d5bbbfaca3e897be95c305e0
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
dcb006535a
FIX: [STUDIO-4164] charset problem in load printer config
...
Change-Id: Id1ee5108b70e926f822ca4f12715bd2255e5c272
(cherry picked from commit 8ea1abc1df9d1d1680f20c4f9f423360b9318ceb)
2023-11-01 09:11:19 +08:00
ca32032654
FIX: [STUDIO-4207] fix tunnel mqtt not active
...
Change-Id: I561eb164256a7eb811d1daec84ad7907d3caa01d
Jira: STUDIO-4207
2023-11-01 09:11:19 +08:00
23079b23df
NEW:support for dynamic configuration files
...
Change-Id: Iec433ca1f75f223af68c5103013ff47d1acf1678
(cherry picked from commit 40acd7f6b11e9b2b3403a84b4b7d4b70da5d0ed2)
2023-11-01 09:11:19 +08:00
eaca2bd0ed
ENH:delete U0 firmware functions
...
Change-Id: I6a65f41224e346023989bd1f097d4bf1b069f907
2023-11-01 09:11:19 +08:00
54d5e9df8f
FIX:fixed some unsupported HMS messages that cannot be displayed
...
Change-Id: Ib5acffb1e2c94bae56aed89fbb71a7a15a660485
2023-11-01 09:11:19 +08:00
23dc1ec960
ENH:dynamic display of AUX fan
...
Change-Id: Ib2b5578567eaa6fde15fdb54bdf24063b627d2d7
2023-11-01 09:11:19 +08:00
e78812dac4
ENH:Supplement to printing status supplement
...
Change-Id: I116e84705b390b99f8646b64eb7e96ae4c35c7d3
2023-11-01 09:11:19 +08:00
5c59b0721f
ENH: [STUDIO-4062] print status supplement
...
Change-Id: I298d4fcfda51b48c90c62936185efc1a6bf459f0
2023-11-01 09:11:19 +08:00
6b5ba84075
ENH: [STUDIO-4029] ipcam compatible remake
...
Change-Id: Ic6cda7daa6a4e3b03fe645d8ae60f1e68a2c3864
2023-11-01 09:11:19 +08:00
5ba829337c
ENH: [STUDIO-4029] apply new device compatible settings
...
Change-Id: Ic807c747d77ccbe99b3b157c2e6d3e3a2945e1ac
2023-11-01 09:11:19 +08:00
21abdb24da
FIX: replace ',' with '.' when using minor languages
...
Change-Id: I992f4c702141f89860625f64d9524ee1c0445cee
2023-11-01 09:11:19 +08:00
771bc38a02
ENH:support setting chamber temperature
...
Change-Id: Icacd3f248a8f4dbff6c928e666f986c62801eebd
2023-11-01 09:11:19 +08:00
08ce9fe662
ENH: add more print stage values
...
Change-Id: I098eb4bae14cbfd44af2dea7fb108bbc07d47407
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
33a8545e2b
ENH: update ota version after get_version
...
Change-Id: If04f1071084891c2ba13a5c3f10ac427dea6abf0
2023-11-01 09:11:19 +08:00
3d52954374
FIX: the n value is not correct when set pa cali value
...
If it is manual, set it to 0, if it is automatic, use the calibrated value
Change-Id: I7c8737366e0ec0c6c2c17a7ad905cfb34e236fd8
(cherry picked from commit b235b0c8b79b1baf6a393ccfea236e1e650dcb7d)
2023-11-01 09:11:19 +08:00
8c8235c1c9
ENH:fixed display the wrong tray type in AMS
...
1. no longer using track_type
2. type using tray_info_idx query
Change-Id: I3ad08dc92e90c86041232d57b80331c563fe24c5
2023-11-01 09:11:19 +08:00
09c94acfcf
FIX: set n value to 0 by default in extrusion_cali_set
...
Change-Id: Ib3c34608413cdde1078c11c6e0cb6ca8a0c02d56
2023-07-31 14:29:15 +08:00
tao wang
zhimin.zeng
chunmao.guo
xun.zhang
maosheng.wei
Stone Li
hu.wang
Kunlong Ma