Commit Graph

1838 Commits

Author SHA1 Message Date
lane.wei 57a57fc429 FIX: bed_type: fix the bed_type issue when already set in plate
Change-Id: Ieb9c432051aeaf1dbb94c75f95974ff41c0713a0
(cherry picked from commit 73de2ea2cfcfa6b09373f4faa2d84f0b6e2f4ffc)
2023-01-10 19:08:26 +08:00
chunmao.guo d164889aa4 ENH: [STUDIO-1647] use WebView2 put_UserAgent
Change-Id: Ifae6589892353adb4b940fbe77d7d0f9521330dc
2023-01-10 19:08:26 +08:00
chunmao.guo a953442c9e ENH: update WebView2 to 1.0.1418.22
Change-Id: I76d4747f8e135368e9dae6ee9f3e980bf4ec6f81
2023-01-10 19:08:26 +08:00
salt.wei 4b63bf453c ENH: fix z hop error issue
This is fix for z hop issue that z hop of
layer change is always spiral list even when set
to normal lift

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7b235a640b0538bedfe4cef61ca24108c1ba7246
2023-01-10 19:08:26 +08:00
tao wang c4136f7641 ENH:reset filament empty when the remain value is error
Change-Id: I1fa1923a7ef3cd61b592e5ff0874aadf5a534eaf
2023-01-10 19:08:26 +08:00
yifan.wu 5d9bb61f8e ENH: use spiral lift only when it is needed
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.

Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
2023-01-10 19:08:26 +08:00
tao wang 47a46010bd ENH:allows the user to enter a printed IP address
Change-Id: I9d2617d0dd42f53e93d61e98bcf3cc97979a93f6
(cherry picked from commit 24ab56f8568e9637634e97a0632309cfd2762749)
2023-01-10 19:08:26 +08:00
tao wang c8df45c11f FIX:fixed some models with special names cannot be downloaded
Change-Id: Id5a3dff960d6e9868dfa87aef96093de2dc215e6
2023-01-10 19:08:26 +08:00
chunmao.guo 301d06dab4 FIX: [STUDIO-1770] webview white background
Change-Id: Ie828f53139978b0f7745355e7c65c7f6067dd4d3
2023-01-10 19:08:26 +08:00
liz.li 3190283929 FIX: fix problems of preview-slider under ByObject
1.layer number display in disorder under ByObject case
2.disable unworkable functions in ByObject case:add pause, add custom Gcode, change filaments

Change-Id: Ib0413e047db1daf1ca582e1369c70b6b93c1bd64
2023-01-10 19:08:26 +08:00
liz.li c832a03616 FIX: toolbar cannot rescale a super small stl correctly
1.reason: input box limit the digit of input number, and has a max value limit of scale

Change-Id: Ib6f36033ebc9d1621eb0c3359c67ff788518f528
2023-01-10 19:08:26 +08:00
liz.li 5f5ffc8376 FIX: wxGDIFont exception when init
Change-Id: Ib245e89e2e8644c662d7621101777a5d8e15c7d9
2023-01-10 19:08:26 +08:00
Stone Li a163d4fa02 NEW: add build time in about dialog
Change-Id: Ibb27223568f19f39ec57c01af23376c325d3972b
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-01-10 19:08:26 +08:00
zhimin.zeng 93b1a335d2 ENH: allow generate wipe tower when print ByObject
allow generate wipe tower when print ByObject if there is only one object

Change-Id: I199e9cab7bd7c963edf58e829c663bb91c12f4f8
(cherry picked from commit 7153c30800022f3afb9811c67f88ba28c9b25d20)
2023-01-10 19:08:26 +08:00
zhimin.zeng 1c5c9bd3d2 ENH: support text modify
Change-Id: Ide5a3c7df5f3ea4395821a65807d79b459f3e46e
(cherry picked from commit 55de44d4c80c545de14466aa039a7b0ac144f395)
2023-01-10 19:08:26 +08:00
zhimin.zeng e70253cf25 FIX: can not save project when modify bed type in the scene
Change-Id: Iaea1bef142edcf0c68a64cfa1f3b1d309b96f251
2023-01-10 19:08:26 +08:00
lane.wei 8183b7d333 ENH: debug: when not release to public, use vectored exception handler
Change-Id: I2f80f07e035d6a6652574470ac13631baba7cf7d
2023-01-10 19:08:26 +08:00
tao.jin c75ca06f01 ENH: render mesh_errors notification in red
Change-Id: Ie13524dc27436b9e1c075e5e9e0363cfa1504147
2023-01-10 19:08:26 +08:00
lane.wei 88ecb2aa2e ENH: save hints.cereal into user directory insteadof cache
Change-Id: Ie44f18768e9908946f173bc668a46eb723f19745
2023-01-10 19:08:26 +08:00
lane.wei f0908f2a63 FIX: repair: fix the state not correct issue after repair
Change-Id: Ic4aaeaeeee921294e0a5ab6d82517dc28f8822c8
2023-01-10 19:08:26 +08:00
zorro.zhang 54aae68874 FIX: optimize text display
Change-Id: I4e44e12786a1af34cca35edb3c32d9f500b933ed
2023-01-10 19:08:26 +08:00
qing.zhang 9fcb67e6c7 FIX: add plate offset of placeholder
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id16559e112b6db2759b95f97465d49ab85206e83
2023-01-10 19:08:26 +08:00
Arthur 646b259972 ENH: merge tree support layers to support layers
Will greately reduce repeated codes.

Change-Id: I506a97a907b5b393fe41e13ae53e2f7c9247c4c5
2023-01-10 19:08:26 +08:00
tao.jin b6ef31f7b9 ENH: refine physical printer dialog
Change-Id: I34d122f83addab3db2952a6a2b91b59921d2a981
2023-01-10 19:08:26 +08:00
Stone Li f89dfa7615 ENH: modify slice button and print button initial value
Change-Id: I114aa63b25f32ba6b427afd8b9ce4ebebfe18915
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-01-10 19:08:26 +08:00
qing.zhang c4ec0ddae9 ENH: put the seam on invisible line of modifier
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib16de93b26e96902ce2e0d844b78d0cc680638a4
2023-01-10 19:08:26 +08:00
chunmao.guo ff49a854b2 FIX: [STUDIO-1653] login dialog position
Change-Id: Ib73195d55c8bec3e8d5eec4b56489a5c22882de9
2023-01-10 19:08:26 +08:00
Arthur 9dd1cabef6 ENH: translate support setting suggestions
Change-Id: Iabaf85589cd99d3364edeb4c3f2847156657e05a
2023-01-10 19:08:26 +08:00
chunmao.guo 6763968461 FIX: [STUDIO-1575] end dialog with wxID_ABORT on user end session
Change-Id: Ie509b5780a5d11572eadd6dee2fd93903c128c17
2023-01-10 19:08:26 +08:00
zhimin.zeng a6e3d63576 FIX: a part with new color change to negative part
even though there is only one color, the wipe tower is still exist

Change-Id: I5c68a4ca7239cfc74aba452a6588d74f6d622f47
(cherry picked from commit 032c2e6718c65aa4c5b18eecd0ccce27f3f489bb)
2023-01-10 19:08:26 +08:00
chunmao.guo 1d04c35d0d FIX: StaticBox zero size bitmap
Change-Id: I33d942f771171fe1f2a61b5f3d1a66a6c7e0da05
2023-01-10 19:08:26 +08:00
chunmao.guo 99b97ffeb4 FIX: [STUDIO-1842] format wiki url's anchor
Change-Id: Ifb8f73a1674aecaaad5ef5e7248a142e8a0f0146
2023-01-10 19:08:26 +08:00
Arthur 38ce4b94f4 ENH: improve sharp tail detection
1. When sharp tail region suddenly grows a lot, it means it connects to
   a well supported region and is no longer a sharp tail.
   Jira: STUDIO-1862
2. First layer of sharp tail can not be reducible (must have extrusion,
   i.e. won't disappear after slicing), otherwise thin spikes at the
   top of the object are also treated as sharp tails.
   Model: knight_seadra
3. Increase sharp_tail_max_support_height to 16mm
   Model: Crane_reversed

Jira: STUDIO-1859 (for this issue I don't what is the exact cause,
   but adding these three improvements solves the problem)

Change-Id: I3cd57b184d78dba8862ab3c214057ae78fe49d1f
(cherry picked from commit 9242c6a6d1f23f11ebc43a9049ce10229a15c60e)
2023-01-10 19:08:26 +08:00
zhimin.zeng 4284d2ddb0 ENH: generate wipe tower when custom change gcode filament
Change-Id: Ia0c81453f09457a9d1d56fbcdce79112953c0208
2023-01-10 19:08:26 +08:00
zhimin.zeng 75c5d7b267 FIX: the position is reset when reload from disk
Change-Id: I1acf9501f7211b45655c86dac7a529681f8cf150
(cherry picked from commit 1b7c763673e37f33ceea59be96cfb29760721f6b)
2023-01-10 19:08:26 +08:00
salt.wei 030d97bf78 ENH: optimize area of top surface
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia3d1be6ad3b9f55ee1acda14d0be955055f6dfcb
(cherry picked from commit 448fd3043950613a4d91df256fa9ee52a57fcaca)
2023-01-10 19:08:26 +08:00
salt.wei 9f4a54d280 ENH: don't generate detour travel when position is unclear
Detour travel is wrong in multi color printing when
current position is unclear.

Don't generate detour travel in this case to avoid
colour mixture.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2d24b04d99b8a0b34a46c9f88e522e97cb0fe354
2023-01-10 19:08:26 +08:00
tao wang 12590a3599 FIX:fixed title of calibration dialog not being darked up
Change-Id: I3c24dde3ba3effb815b744aef16da273ad78b55a
2023-01-10 19:08:26 +08:00
tao wang 49f3f3571d FIX:fixed object table Brim does not take effect after setting
Change-Id: Ic9dbe6b4c016a69d0e26b6c9a232deda7f526d12
2023-01-10 19:08:26 +08:00
gerrit ae8a64f4d5 ci: update build version to 01.04.01.52
Change-Id: I2df45013c155c03e6d64253b7bdf39afe1344e08
2022-12-26 05:31:54 -05:00
Arthur bb48983e91 ENH: improve generate_contact_points tree support
1. Previously we used integer Point type to detect corner, which was wrong.
2. Delete duplicate points more aggressively to prevent too many points
   around curved overhangs.
3. Do not generate roof_1st_layers if there is no interface at all.

Change-Id: I1167ac04c533ec8f29dc9e656ba7072d1b54197f
(cherry picked from commit 1329347c4bf9c8207cf21e591a6ad113bb565673)
2022-12-26 05:31:54 -05:00
lane.wei 4385a8b33e FIX: fix the seq_print circle size not correct
Change-Id: Ie0674c2653e1db691447c150d9c669967960650e
2022-12-26 05:31:54 -05:00
tao wang 49f8d0df50 ENH:UpdateVersionDialog compatible web mode
Change-Id: I4a9294fc89005995be13cc3503d883324cb01ebf
2022-12-26 05:31:54 -05:00
gerrit c663968089 ci: update build version to 01.04.01.51
Change-Id: Ia2c83ec777f803667f1f5398426ba19554e6dc7c
2022-12-26 05:31:54 -05:00
lane.wei 3871dfa03e ENH: update translation
Change-Id: Ibe4bbb671b08ae0e94506d629b711963a58907b5
2022-12-26 05:31:54 -05:00
lane.wei 35da8592ba FIX: fix the chinese text display issue for network plugin update
Change-Id: I50efd56f2b4a29237e76f5329c0423cfc2c7fff0
2022-12-26 05:31:54 -05:00
Arthur f4519a45e9 FIX: tree hybrid may hang duing lightning infill
auto select grid infill for tree hybrid, and set default wall count to
1.

Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
2022-12-26 05:31:54 -05:00
Arthur e7e26b4b1a FIX: fix typos
Change-Id: Iba3727626d9102aa6c87d336ee1d49bbfbb7c479
(cherry picked from commit bf58651fffb94f9aeb4e85ff6c8a7b9feb3cab83)
2022-12-26 05:31:54 -05:00
qing.zhang d287b88548 ENH: add metal PLA-CF & PAHT-CF
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I698cca7e9a8f62d16361184f0ab8428dc177eacf
2022-12-26 05:31:54 -05:00
Arthur 58aaa94fc7 FIX: empty layers and dangling hybrid support
1. fix possible empty layers (caused by continues walls)
2. fix normal node may be absorbed in drop_nodes in "tree hybrid"
3. popup message to ask the user to select best parameters for tree strong
   and tree hybrid.
4. auto select lightning infill for tree hybrid.

Change-Id: I7d172887a9b0e4f268267684e83fc02dc7ec6a0c
(cherry picked from commit bc6d130e86c252d7fc1f84c4df7da95050dd5d51)
2022-12-26 05:31:54 -05:00