1. Modify texture bed temp to 65
2. Modify max-v-speed for ABS
3. Modify some params in Generic PA
4. Modify PLA,PVA params
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I42584a6015b8526f6bbb93024316968198bd76ce
1.Modify the PEI bed temperature of PLA Basic, Matte, and Tough to 65 in
A1 mini. Set the bed temperature for the first layer of Bambu PETG-CF
to 65 and 70 for the other layers
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia902bbb7f824082d5346709d781cac64296f47a8
Many params are not right.Just use default
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5c4a1e8b046940e174f5681a79031b5f20fcafc5
Can not see obvious eleplant foot after printing
JIRA: None. found by self test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5993b3a2dbb6f4f6a6b8a1714654f1213e4b90f2
1.Fix the problem about first layer can't set temperature
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id4087ba789fb6127d8a1ad75ae518aaffa05815d
1.Modify generic PPA-GF max v speed to 6
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I18cfdcb9037b9d9fda6ec60d12c6057a5f9e9bd0
1. Set max volumertic speed to 11.5 for PolyLite PETG
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5ee019d07124870893df9ab636851adc0f2a6425
1.Optimize the heating sequence for the X1E chamber
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I22650b71961218b32247a84eefb9bf8dc5dceeb7
1.shorten prime line and change x axis freq sweep
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3582f7fb17dfa173f33ad74f49d7d2b70036df5f
1. Remove some keys with tree support
2. Modify thin_detect wall and adaptive_layer_height
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie342c27d4dcd2a262993e472a203ce92da14dbb2
Add more photo shoot comamnds in the end gcode to prevent sharp ending of timelapse video of A1.
Also fix a bug of using timelapse_type=2 in end gcode.
Jira: None
Change-Id: I2a426be7a2f7d22b10b79c2b7eb1a04538b5340a
This has no any influence on function. Just make
the limitation more clear and easily maintained.
So people can easily see timelapse function is not
supported in i3 printer
JIRA: none
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0c88a5a0ce4b7e42117842c9673e1df022fdf618
1. Add small layer height process profiles for X1 series
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifb826ccf889016de320b5eb23cbe2eae341db28f
this patch is cherry-picked from OrcaSlicer
Thanks Michael Birkler for adding Tronxy profiles
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3aab8d5e9c03f6632bdde292f91232392eaf7cf7
Models with overhanging areas are easily knocked down with Z hop height
at 0.2mm
Github: None
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I65fa14fe5f217c2d1384569efa8c2233c14dde83
Fix percent in support interface speed in 3rd printers
jira:STUDIO-4292
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id030922546c7246f205d0e2b9294f607ce550696
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
xun.zhang
lane.wei
salt.wei
Catalin MARINCIA
qing.zhang
maosheng.wei
Arthur
wenjie.guo
Michael Birkler
chunmao.guo