4e15942ba8
FIX: differnt_support_interface_filament was wrong
...
This bug will cause a gap between support base and interface in Snug mode.
Jira: STUDIO-4067
Change-Id: Ife4d1fc3652803e9d41bb49fddf126cb05798ae5
2023-11-01 09:11:19 +08:00
7e70e071e9
FIX: loading stl with NaN points crashes
...
Avoid loading NaN points.
Jira: STUDIO-3889
Change-Id: I8c00f24e0ae1ba3b637e5d9bb13de93b1b4e77ba
(cherry picked from commit 0d244c7f65b913922ca4fad59d93fd80725f2e49)
2023-11-01 09:11:19 +08:00
c8651b43f1
FIX: CLI: fix a wipe tower position issue
...
when arrange failed and restore to original
we will compute the position of wipe tower again
we should skip this case
JIRA: STUDIO-4048
Change-Id: I19edc36dfa7ec5a9f6b5ba3a1c1e0767361b3e33
2023-11-01 09:11:19 +08:00
5c59b0721f
ENH: [STUDIO-4062] print status supplement
...
Change-Id: I298d4fcfda51b48c90c62936185efc1a6bf459f0
2023-11-01 09:11:19 +08:00
b94dee2460
ENH: CLI: add a flag to allow minimum size save
...
JIRA: STUDIO-3752
Change-Id: I0277c34d108185d10130630a72811122f8ee9ae2
2023-11-01 09:11:19 +08:00
6ae7228f9e
FIX: CLI: fix serveral issues of CLI
...
1. duplicate id issue, MAK-1702
2. shrink issue, STUDIO-4048
Change-Id: Ie952f1ecc5267a60f0ce3220c4a5ea31cf7199ff
2023-11-01 09:11:19 +08:00
d724a3bd66
FIX: use extruder list to decide chamber temp
...
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
2023-11-01 09:11:19 +08:00
977ae079c8
ENH: add support for chamber_temp and exhaust_fan
...
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
2023-11-01 09:11:19 +08:00
4121960292
FIX: allow changing ironing angle.
...
allow changing the relative angle between the top surface and the ironing.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I85e8ff3d05d3a6d9408da011631e7d71a6d85178
2023-11-01 09:11:19 +08:00
4fce50453c
FIX: no soild ironing if top or bottom shell is 0
...
fix the ironing be apply to the preview layer of bridge
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I53cb4e6ff80176953c2927c1d9dc5eecc590764c
2023-11-01 09:11:19 +08:00
6b5ba84075
ENH: [STUDIO-4029] ipcam compatible remake
...
Change-Id: Ic6cda7daa6a4e3b03fe645d8ae60f1e68a2c3864
2023-11-01 09:11:19 +08:00
5ba829337c
ENH: [STUDIO-4029] apply new device compatible settings
...
Change-Id: Ic807c747d77ccbe99b3b157c2e6d3e3a2945e1ac
2023-11-01 09:11:19 +08:00
13857dba34
FIX: modify the default position of wipe tower
...
Change-Id: I27eacb73a7e32d20416da785378d3ff0c31f5c23
2023-11-01 09:11:19 +08:00
9560a292f2
FIX:check if the printer and preset are the same
...
jira:[STUDIO-4018]
Change-Id: I69ea1e3f8e8214ae68464665e1e7260fcc41dd82
2023-11-01 09:11:19 +08:00
ba3638e70e
NEW: allow changing the angle of ironing in the dep mode.
...
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I09348096fd19ee4e07ce3a04ae152f7ee5758767
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
2023-11-01 09:11:19 +08:00
edcdad162e
FIX: tree support bottom interface layers were not correct
...
The bottom interface layers were not right when "independent support layer height" is enabled.
This commit ensures there are always 2 bottom interface layers and the gap
is not less than specified. However, the gap may be slightly larger.
Jira: STUDIO-3842, STUDIO-2138
Github: #2127
Change-Id: Ifd8fbc4c7bc6dd92f2534fdd0179458a9e93c79a
2023-11-01 09:11:19 +08:00
9f88906587
FIX: remove Tolerance test and modify wiki link for mac
...
Change-Id: Ieca66b0226eef692191e9e7bed56e54dc9d7b40c
2023-11-01 09:11:19 +08:00
a6ab8314a4
FIX: modify title text Jira: STUDIO-4007
...
Change-Id: I1826f72ba8e09b22481aa096fd5c1f881410d08d
2023-11-01 09:11:19 +08:00
6f8005c306
FIX: improve brightness for the slice of black model
...
jira:https://jira.bambooolab.com/browse/STUDIO-3992
Change-Id: Ib25112af68bb9a86b13f9b0c6f4a8229e6d2a15f
2023-11-01 09:11:19 +08:00
f7495612fa
FIX: add small disc stl
...
Change-Id: I5c6c8ca1d4a15fc1462fe47d2e5e37b459f9a9a6
2023-11-01 09:11:19 +08:00
5d254cd0bd
FIX: Flow Rate Calibration Pattern too crowded with 0.8mm nozzle
...
github issue 2296
Change-Id: Iee766680c26ab5ca826961f53f8963d802a25397
2023-11-01 09:11:19 +08:00
21abdb24da
FIX: replace ',' with '.' when using minor languages
...
Change-Id: I992f4c702141f89860625f64d9524ee1c0445cee
2023-11-01 09:11:19 +08:00
58a5db2607
FIX: config: update config with correct logic
...
1. remove other vendors
2. set the version to correct one
jira: STUDIO-4009
Change-Id: I804bb1d08a9d241bc323a22b0d3fb40f7c9c3c9a
2023-11-01 09:11:19 +08:00
ecaa5fa2e6
FIX: CLI: add logic to allow use cached_data while printer size change
...
when print profile created on small printers
the cached data should also be used
JIRA: MAK-1658
Change-Id: I31e801bd3116838baaeaef44f4aa6d53d65aa058
2023-11-01 09:11:19 +08:00
f87996960d
FIX: [github 2259] Maintain development mode when reopening BBS
...
Change-Id: I9cd6bddbc58f7841499665e21dc606b35c706afc
2023-11-01 09:11:19 +08:00
c0a247994c
NEW: Add Ellis' pattern method for pressure advance calibration
...
Add a new calibration pattern method for pressure advance calibration, which can better test the influence of k value on the corner. The changes of this patch are picked from OrcaSlicer by thewildmage, thanks to thewildmage for the great work!
github issue: https://github.com/bambulab/BambuStudio/issues/2222
Change-Id: Icc8fd4d52b20c1668bfa08716b48549dfada515b
(cherry picked from commit eb72d8b681bef270906406a2d10a36d4efbce900)
2023-11-01 09:11:19 +08:00
e7bd5b9bb9
FIX: missing include url.h in WebViewDialog
...
Change-Id: Ib463a80ab9d5002c52fe5718254f6c91a6cd168b
2023-11-01 09:11:19 +08:00
780d9a7e93
FIX: add cursor and enter processing for plate name
...
github:https://github.com/bambulab/BambuStudio/issues/2262#event-10081065971
jira:https://jira.bambooolab.com/browse/STUDIO-3992
Change-Id: Ie6120a8ff99f9568f9e42800429a1c5b378fc28f
(cherry picked from commit dbfc17943fa912470f26de1615088c87bd022b4e)
2023-11-01 09:11:19 +08:00
cb38b71825
FIX: should consider plate offset in wipe tower
...
Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
2023-11-01 09:11:19 +08:00
2a996d40b6
FIX: [github 2246 2209] reload form disk not working
...
Change-Id: If70d7b700c454e9290741980afb0a1fd73a1fa5a
2023-11-01 09:11:19 +08:00
d8b56977b9
FIX: STUDIO-3745 open gcode.3mf, unable export to file
...
Change-Id: Ib8a45cb38f28438ecc4d2a772f1437dbd324078a
2023-11-01 09:11:19 +08:00
5eba42b565
FIX: use current_language_code_safe() for valid language
...
Change-Id: I480730055588aa76bd40f35e6c4bcbe9833c330d
2023-11-01 09:11:19 +08:00
af534509b3
FIX: meshboolean set transformation matrix twice
...
Change-Id: I1428c66f69bbd14fa0485bab23b0a26b8e7b6dba
2023-11-01 09:11:19 +08:00
9b980c9bc6
FIX: The cancel button should not make plate name valid
...
Change-Id: Id2b3935e87d443f5a594fdd588a63e502c0321e5
2023-11-01 09:11:19 +08:00
060b41707e
NEW: first layer printing sequence
...
Change-Id: I19e39a27cf972eb859e51a334aeae8f57ee263f8
2023-11-01 09:11:19 +08:00
a75d024485
NEW: support korean and russian language
...
Change-Id: Ie29a6304906415e2e71f0dc8ee99ffc65b1a1708
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
93cf701be5
FIX: [Jira:3864&3728 github:2227] translation issue
...
Change-Id: I375e72191b3af1cf389e65ff4b62ed4f77d8f76a
2023-11-01 09:11:19 +08:00
e7598e6406
ENH: [STUDIO-3911] web view drag drop on macOS
...
Change-Id: I92e7f6135152e4bfaf7f7342cdff1ea2e269c5a5
(cherry picked from commit 3452e6edebeecf499d44798ff6b85425ab244cb4)
2023-11-01 09:11:19 +08:00
d30470d603
ENH: [STUDIO-3911] load as model file when drag to home page
...
Change-Id: I1d8986ca4984fea418371f253a48a9593bb9b1af
(cherry picked from commit 685edaa145cd4b4ce4afce00ae81d78305f84e84)
2023-11-01 09:11:19 +08:00
dee1c04f28
FIX: load from gcode stream crash with null model pointer
...
Change-Id: I09a17dd5726d164a4e0bc1d5f213581832a17a5d
2023-11-01 09:11:19 +08:00
a9e436e557
FIX: [STUDIO-3735] unload default user filament/process presets
...
Change-Id: I24e54823e91ea8f6cad9bfbdf69ee838e75f8190
2023-11-01 09:11:19 +08:00
163d279851
FIX: [STUDIO-3891] check config update after sync
...
Change-Id: I82e409f0d3649a371cbe0f8ee9a5f9ad1a267fc8
2023-11-01 09:11:19 +08:00
ed82262ca8
FIX: [STUDIO-3736] show download failed dialog & cancel task
...
Change-Id: I25830b29ffaaced26fcee8290ccfcce590e3963a
2023-11-01 09:11:19 +08:00
0cd8d5cd78
FIX: input ip dialog not show for liveview
...
Change-Id: I422b89eae3c9b9049416f2460bacb4cc991ca605
2023-11-01 09:11:19 +08:00
fd89e4c256
FIX: remove N1 setting and auto match textures based on printing area
...
Change-Id: Ia208c7436901a722c8c4e2caa3d7573fd0714432
2023-11-01 09:11:19 +08:00
771bc38a02
ENH:support setting chamber temperature
...
Change-Id: Icacd3f248a8f4dbff6c928e666f986c62801eebd
2023-11-01 09:11:19 +08:00
403c5e825d
ENH: modify device upgrade page
...
Change-Id: I16c91c6e7b9c4c44307425e343b260ed873a695d
2023-11-01 09:11:19 +08:00
c414c66d73
FIX: entering save page likely to crash
...
Change-Id: I50130e8c75bdeb82a347621250842e8f55fe24b1
2023-11-01 09:11:19 +08:00
22aca74e5b
ENH: remove the single filament limitation of skipping object
...
We planed to skip uncessary filament changing when skip
object. However, this caused color mixing.
If we try to fix the color mixing issue, the flush gcode
should be generated by printer itself. This is not a short
time job.
So currently we never skip changing filament when skip
object. This will not save much time and flushing. But better
than none.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6046cd2765cf68058712b4256402acc0be771144
2023-11-01 09:11:19 +08:00
d5120f890e
FIX: crash when use manual flow rate
...
fix the PA tower is effect
Change-Id: Idc00090c75023d62beca2a32529a6749081de9ef
2023-11-01 09:11:19 +08:00
fdbe35b619
ENH: add placeholder first_layer_center_no_wipe_tower
...
This placeholder can be used for smooth timelapse of i3 type printers.
Change-Id: I953a437a7733835d850812565ff5f31b83292912
2023-11-01 09:11:19 +08:00
0167baee89
ENH: add shortcut key of clone
...
Change-Id: I63a570ac05695d6cd1e36293f7ca9858d9f7f358
2023-11-01 09:11:19 +08:00
e88550b206
FIX: unify cli and GUI auto-arrange
...
Make sure cli uses same params as GUI's auto-arrange.
Previously cli uses wrong skirt_distance.
Jira: BLPIOT-255
Change-Id: Iaccfb76acf7413ec614fff006feb770dcd6783cf
2023-11-01 09:11:19 +08:00
473ebbdc18
FIX: Re-multicolor slice when change first_layer_print_sequence
...
Change-Id: If17708744a52c95aec406e2cd46a29ff4cf29872
(cherry picked from commit 892f508f194e49462a2c470ce8d0f3f6313a0c09)
2023-11-01 09:11:19 +08:00
476ca19689
ENH: support custom the first layer print sequence
...
Change-Id: I0516948292933fe47d39fb3ae2f7e91473b45b3a
(cherry picked from commit 5bbdb28c86509d5f94b5b9c33a0f2e1b2749e94b)
2023-11-01 09:11:19 +08:00
3f53791200
FIX:The blank page appeared when clicking to log in
...
Change-Id: I0f6904c85da5f72fa9d4c0be0e8174acdf44cc8c
2023-11-01 09:11:19 +08:00
25f9cccf2a
FIX: disordered support interfaces in tree support
...
Can't delete nodes with no children, otherwise the parent-child relations may be corrupted.
Jira: STUDIO-3737, MAK-1557
Change-Id: I1de39e182bac4a55a8739c00e59fdf7b9b5e4dfb
2023-11-01 09:11:19 +08:00
9fde7861c4
FIX: Bugfix for zero-width tree supports from @scottmudge ( #1367 )
...
fix bug with zero width tree supports throwing exception.
This a PR from @scottmudge commited to OrcaSlicer.
More than the original commit, we also unify the usage of line_width and
support_extrusion_width, making things simpler.
Change-Id: I0b7a4344cbda4fdf05dfd9f8965f598ad6844429
2023-11-01 09:11:19 +08:00
ef805f0c5a
FIX: change the max length of plate name from 40 to 250
...
from github user:https://github.com/bambulab/BambuStudio/issues/2119#event-10014273957
Change-Id: I3db2db78f7c870864123789d8ac5eadc31702944
2023-11-01 09:11:19 +08:00
a549553960
ENH: [STUDIO-3893] edit plate name in object list
...
Change-Id: I2dd704c50f684bedac7958d4a133edbda5522382
2023-11-01 09:11:19 +08:00
8e10ec039f
FIX: Prompt dialog box for optimizing studio versions below 3mf
...
Change-Id: I6df693f31d25f023c2dc4c1f0a5ec27e70e105f7
2023-11-01 09:11:19 +08:00
b09601777e
FIX: log device version for media connect
...
Change-Id: I0eada63e3d8e25840a221263beac5a9104f43d0f
2023-11-01 09:11:19 +08:00
fb528c67b7
FIX:fixed download progress starting from 1%
...
Change-Id: I9b073e6fa1698f5ac02827d30e883f585ca68674
2023-11-01 09:11:19 +08:00
74fc252dcf
FIX: exchange the position of the restore button with ComboBox
...
Change-Id: I2f7b25883110508d1c6f478ecac86d4a92ed8548
2023-11-01 09:11:19 +08:00
08ce9fe662
ENH: add more print stage values
...
Change-Id: I098eb4bae14cbfd44af2dea7fb108bbc07d47407
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
87e8c64cb0
FIX: [STUDIO-3892] warn bambu source dll from another install
...
Change-Id: I23ae1b93d99035135786a6f40321475ea6c1c373
2023-11-01 09:11:19 +08:00
7a3dcda2a2
FIX: avoid the bug in wxControl::Ellipsize api
...
exist a bug where the last bit of Ellipsize api in the wxwidgets is an out of bounds array with the '&' symbol.
Change-Id: Ie54f7958195815bd9b028f86284cc5da582cee8a
2023-11-01 09:11:19 +08:00
47db82ee1e
FIX:Preference page scrolling issue
...
Change-Id: Ia885b083a7467f3558a940b808f071d9ca80e531
2023-11-01 09:11:19 +08:00
33a8545e2b
ENH: update ota version after get_version
...
Change-Id: If04f1071084891c2ba13a5c3f10ac427dea6abf0
2023-11-01 09:11:19 +08:00
536bdeda54
FIX: Revert overhang optimization
...
Revert overhang degrre split
This reverts commit 7d8c98117ae6b7c2c2d62176d1bf8cf51b28a79b.
Revert "ENH: arachne overhang efficiency optimization"
This reverts commit 7adcceda95fc52be4a37c3e74de1aa776a3c434a.
Change-Id: Ic33a2e8bb11e48b40388706a662267e05508fd25
2023-11-01 09:11:19 +08:00
5efc5ba6ea
FIX: CLI: fix serveral bugs
...
1. bed index not correct issue
2. pick thumbnail not correct when repetitions
Change-Id: Ie846432e29c596f95da30c7df199c252873504f3
2023-11-01 09:11:19 +08:00
8ee88c81c2
ENH: fix arachne wall order
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0f3680ba73689c6fb673c070b0355a84fc25de26
2023-11-01 09:11:19 +08:00
ade248cc2f
FIX: tree support's enforcers inside a hole were wrong
...
Previously holes of enforcer_polygons was taken as contours,
which caused enforcers inside a hole were too large.
Jira: STUDIO-3877
Change-Id: If38c34e2469b822012a2ed0b082783563fe99228
2023-11-01 09:11:19 +08:00
ade460d6b1
FIX: crash at flow rate cali save when input Chinese
...
Change-Id: Idfc913e79c13646c9536c8d331c216acdb1e2ef5
2023-11-01 09:11:19 +08:00
4d438c6eba
FIX: translation
...
Change-Id: I4e6ce9943df178c80a47c49fb50da1ba16d1d7a3
2023-11-01 09:11:19 +08:00
307a888597
ENH: key name-only one wall on top surface
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ife706b02d51badddc7e6dcba446a4d049695a706
2023-11-01 09:11:19 +08:00
f66f4b5462
ENH: fix overhang degree split
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I81b946f2fab5e561f965df2ab9852c10c61f8480
2023-11-01 09:11:19 +08:00
bc34f9e223
FIX:fixed sending print failure due to long plate name
...
Change-Id: I89f32f7d7f214d55051e736f834e0e49d7c808ab
2023-11-01 09:11:19 +08:00
0d837e2587
ENH: top one wall for arachne
...
split to 3 mode
not apply
all top surface
topmost surface
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id9bb1a6ded7414b2f093ac01e4ecb4b93057d022
2023-11-01 09:11:19 +08:00
287547132f
FIX: remove_invisible_ascii
...
Change-Id: I5d9b2dcf21b5ba2842b27da6603a0ac4365545ff
2023-11-01 09:11:19 +08:00
9f18c886c9
FIX: add Chinese pictures in cali page
...
Change-Id: Ibcb0a01ec0fcbb3a73708cb6dc771748b3ebc2ea
2023-11-01 09:11:19 +08:00
aa96aba89d
FIX: display failed when the flow rate is 0 or too large
...
Change-Id: I20af5b0badba63a12129fb571524a152b591d974
2023-11-01 09:11:19 +08:00
3aefe96f26
FIX: [STUDIO-3835] Cali translations
...
Change-Id: I705d27ff172c8c9c0eed617f69af3128f2e3ffe0
2023-11-01 09:11:19 +08:00
eee9f9dc13
FIX: cali related encoding problem
...
Change-Id: Ia79237d9e2f37fd8720411891fb724c3bd00b9fb
2023-11-01 09:11:19 +08:00
3d52954374
FIX: the n value is not correct when set pa cali value
...
If it is manual, set it to 0, if it is automatic, use the calibrated value
Change-Id: I7c8737366e0ec0c6c2c17a7ad905cfb34e236fd8
(cherry picked from commit b235b0c8b79b1baf6a393ccfea236e1e650dcb7d)
2023-11-01 09:11:19 +08:00
c5ea3c8b71
FIX: fedora: cannot select preview plate thumbnail
...
Change-Id: I1bb774f7f48a7b905498d5c1cc06263aa3b01ce9
2023-11-01 09:11:19 +08:00
7c905f93c3
ENH: CLI: add time record for prepare/slice/export
...
Change-Id: I4004a9af3823223c885f428f5a2f180f9d9074e5
2023-11-01 09:11:19 +08:00
c47d9bbaf5
FIX:fixed issue of not displaying load/unload entries
...
Change-Id: I6e264de950f194a93055c4120a025ce37d1e2b15
2023-11-01 09:11:19 +08:00
8c8235c1c9
ENH:fixed display the wrong tray type in AMS
...
1. no longer using track_type
2. type using tray_info_idx query
Change-Id: I3ad08dc92e90c86041232d57b80331c563fe24c5
2023-11-01 09:11:19 +08:00
f6d5e5bdea
FIX: cali: manage result crash
...
1. fix input chinese on editing name will crash
2. fix: repeat editing action before the whole dialog is refreshed, will crash
Change-Id: Ia5f785987aec547007a1d71e1af770b606b50d65
2023-11-01 09:11:19 +08:00
94b4194b11
ENH: arachne overhang efficiency optimization
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9b0954e24867b5f4a29e0e5d24708cd977ec22aa
2023-11-01 09:11:19 +08:00
ebf9c19e65
ENH: remove check link state
...
Change-Id: Iba16694299f92a89e63ea9c4829e3087a29bade1
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
ddb20e0b13
ENH: CLI: add more logic to support repetitions
...
1. add identify_id for those clone objects
2. ensure succuss when copy multiple objects
Change-Id: I8a92f485442577ce70b1f5c46449dae1ae07b713
2023-11-01 09:11:19 +08:00
77cf8a1e55
ENH: Allow users to adjust the order of components in assemble
...
Change-Id: Ie4b979e4cfdf99d822801400cd6b54773f526d7a
2023-11-01 09:11:19 +08:00
639bf63af5
FIX: filament painting doesnt work properly #2078
...
STUDIO-3731
Change-Id: Ifc93baf194d5e81eb7e00facf85344bfc05878fc
2023-11-01 09:11:19 +08:00
c522ed8ec0
FIX: calculation error in overhang area
...
bug: There is a part of the overhang area in the model that cannot be applied
Change-Id: Ia1045225776ccb0e8730912aae1d4c7509f40c5b
(cherry picked from commit daa3e131564690e9e169313d147fd84537b898ca)
2023-11-01 09:11:19 +08:00
19f6fec6c4
ENH: close logging in console of libcurl
...
Change-Id: I434f733a66ee79af762cfc2e52c28aba0e192d97
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
c31ff2d43c
ENH: CLI: support system preset passed to CLI
...
Change-Id: I933d49e677c8610c3fe90bbe7d455f94d950ae96
2023-11-01 09:11:19 +08:00
d980aba29d
FIX: [STUDIO-3531] Differentiation of Memory Exhaustion
...
Change-Id: I009b78f1f3d4339745e44208f10b91083efaf744
2023-11-01 09:11:19 +08:00
bb17fdea9c
ENH:adjusting the style of printing options
...
Change-Id: I9a9bb554cc21d24797e5ebdb8ea33c39838d3e90
2023-11-01 09:11:19 +08:00
Arthur
lane.wei
Kunlong Ma
xun.zhang
wenjie.guo
qing.zhang
chunmao.guo
zhimin.zeng
tao wang
liz.li
zhou.xu
maosheng.wei
thewildmage
salt.wei
Stone Li
Scott Mudge