853f899500
ENH: remove bambu tpu 85a temperoraily
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie45b497ad5a838a45e819467944775ffaaf955fa
2025-03-24 08:36:36 +08:00
8d10dcd046
ENH: add profiles for TPU 85A and 90A
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ica88ced8d2e0dbb1bdff0d4b80863bd98102ff16
2025-03-24 08:36:36 +08:00
ff37dbdf79
ENH: remove unused keys in profile
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib54b300a3c10ec45acf4aa842c1162bad5bdb289
2025-03-24 08:36:11 +08:00
3e0b6eb228
ENH: generate framework for all layers
...
jira: none
Change-Id: I95f35ba45fe9f544c53bdf0c5a52a70bd45ee7a9
2025-03-24 08:35:25 +08:00
82d13205d5
FIX: h2d do not support timelapse in sprial mode
...
jira:STUDIO-10402
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5d012a4665bf5715d90fcb973a589d3a500ded13
2025-03-24 08:34:31 +08:00
09c0b004cd
ENH: update H2D filament retraction of matte
...
Jira: 9900
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9e8f962796b7301fff7c8ae4e74db548771bd14e
2025-03-24 08:34:29 +08:00
16813aa460
FIX: missing gcode line caused by gcode GCodeEditor
...
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
2025-03-24 08:34:29 +08:00
e2f25326c1
ENH: add more process profile for H2D
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia0b3534e6e00d7f231cf759b0045473a3fb66526
2025-03-24 08:29:27 +08:00
5c3d804b9f
FIX: Detach the timelapse gcode from layer_change_gcode
...
for X and P machine
2. remove lift and retract in filament_change_gcode and layer_change_gcode
jira: none
Change-Id: I3da2d3ac7f0100d1963dcbb1228323666a060534
2025-03-24 08:24:22 +08:00
fff7873456
FIX: enhance for timelapse gcode
...
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
2025-03-24 08:24:22 +08:00
a780ed9e1d
ENH: set default nozzle volume type to standard
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia7c0118f89aee4e55c4c4b466957d80453775237
2025-03-23 20:31:26 +08:00
3f2f704676
ENH: add filament category
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0f31a376527bc540d27c49908712d08bdba3d719
2025-03-23 20:31:09 +08:00
785e029971
ENH: update custom gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6c69c6ee3cd77c7b82d6b37592e9fc4ebfd539d9
2025-03-23 20:30:10 +08:00
3213963399
ENH: update nozzle volume for H2D
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I21e56af3d4d2d3eb2ec4265ce3f34bac649b18f0
2025-03-23 20:29:35 +08:00
dc81de37fd
FIX:offset error of auto hole-contour compensation
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id806eaab2ddcb44d89ef587765e5396939920f5a
2025-03-23 20:29:35 +08:00
4967862978
ENH: update custom gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5747a7cf019fee24a79c26743fcd227948846b51
2025-03-23 20:29:09 +08:00
2c1bcde53d
ENH: update process profile for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia157b81ad03083a34b7456998625682b6b69e6fc
2025-03-23 20:21:48 +08:00
d3927a59e9
ENH: modify nozzle diameter sequence
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia17f86e3f035ad9389d0f44f8378c822f8cc947e
2025-03-23 20:21:29 +08:00
6b13655f9d
ENH: update some params for filamnet in H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I1171dbf41f840bb0a59045c70a811a5da2bbd694
2025-03-23 20:21:25 +08:00
1770615144
ENH: update gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8b33061aba2ba142bc435c56148e3a5ac500e413
2025-03-23 20:20:35 +08:00
b68a7b3bd6
ENH: add PPS-CF/PPA-CF detection for multi-extruder printer
...
jira: STUDIO-9660
Change-Id: I1df024e178b8561569b493888d6057d8f96aea3c
2025-03-23 20:19:23 +08:00
dec14c4bac
FIX: add printer picture for H2D
...
jira: STUDIO-9592
Change-Id: I1e6b0cc04f3dba8578b5c59eeb1d24ba522f0c72
2025-03-23 20:18:04 +08:00
4ab33d2488
ENH: update smooth coef of dual nozzle machine
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I910b369f7c24a350ee554b744e418954880240cd
2025-03-23 20:16:03 +08:00
4f5b6275f5
ENH: update fan related settings for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9ea172f676b22d5a83c2dd57caa1549192b1c3a5
2025-03-23 20:15:25 +08:00
c141ed25f5
FIX: add timelapse_gcode for H2D
...
jira: none
Change-Id: Iab0248c22963ca7d0dc75fc03d2ccda147059226
2025-03-23 20:14:42 +08:00
ce7a244c3d
ENH: optimize custom gcode for H2D
...
1.Add AMS empty print detection switch
2.Enable heated bed tilt compensation
3.Increase material length for easier bundling
4.Add Z-axis vibration compensation
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9e51d3812eab51447c47f947447b5e1f281ab9a7
2025-03-22 22:11:29 +08:00
90ffa139a5
ENH: add profiles for H2D
...
1.Sync profiles with master branch
2.Add profiles for H2D
3.Add new filament bambu PC FR
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I11d1fff8bd494c59790f22419ef08b9b6096436a
2025-03-22 21:46:43 +08:00
9e2d93eb92
ENH: add pla glow for a1 mini
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic24a3909297f863dd2fc6c2239ca5f084bd7abc7
2025-02-25 11:48:03 +08:00
3f5ccacbdb
Added SUNLU PLA Matte, PLA+, PLA+ 2.0, Silk PLA+, Wood PLA, Marble PLA and PETG filaments for Bambu Lab printers
2025-02-18 20:36:37 +08:00
01ed326feb
ENH: update timelapse for A series
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id739fa9be67d679c31ad81a3ad4c3b75e3afccbf
2025-02-18 17:19:01 +08:00
51e8d57347
ENH: update timelapse for X,P
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5de6cb7ca2441c1ad025c9a448b4763f98013325
2025-02-18 17:19:01 +08:00
e2b326cba7
ENH: modify fan speed for bambu tpu for AMS
...
Set fan speed to 40
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I861f78e2cca4b31daf41e2cba0a4b9b11a658a5d
2025-01-09 19:32:26 +08:00
6d66c520d0
ENH: update A series gcode
...
1.Add long retraction when cut
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I423932bd64d229db3da75578a25136bc99550b0a
2025-01-09 19:32:26 +08:00
a22ef2a16f
ENH: add Bambu PC FR
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I841048b0c10ba3ae7543babd3e8a2ad949fb0cc5
2025-01-09 19:32:26 +08:00
de0698edcb
ENH: modify bed temp for pla silk+
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9b9ba20c7ec84320f265cd042234a8051a41409f
2025-01-09 19:32:26 +08:00
dbc11ef307
ENH: add bambu pla silk+
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I72856952a6586723bfa640c2aa459cc062ba800f
2025-01-09 19:32:26 +08:00
419669f7b1
ENH: add 0.2 profile for PETG Translucent
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I470115d4cbf922cd46948920dad7738b8b026157
2025-01-09 19:32:26 +08:00
7e086adf98
ENH: add bambu pla wood
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id18575ce791f6d4ab4588eafd48131385296e9b9
(cherry picked from commit c7028c096d0c11d794f3f50edda0f32cdaa67e9d)
2025-01-09 19:32:26 +08:00
0c0c290b66
FIX: not use scarf seam as defualt
...
Jira: 8724
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4decfd861aa2205db65c6052736bf650a5dbca06
2024-11-15 19:17:32 +08:00
d3ee6995ed
ENH: modify plate params for support for pla-petg
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8faf9239e8ac706b0e20c322582310e90c59c1e0
2024-11-12 15:35:32 +08:00
4789506e59
ENH: add params for new plate
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id9f99f80b230b516bc31bc98ba3f6a2475837c00
2024-11-12 15:35:32 +08:00
02be5ea26c
ENH: update printable filament for supertack
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id7967c824d159e123a7cd8e5112cd6b01a6c7e06
2024-11-12 15:35:32 +08:00
1445157a2d
ENH: add generic petg hf
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3ee81f0027d604b1397edb5e3d81b3ece7676810
2024-11-12 15:35:32 +08:00
d565127446
ENH: apply scarf seam by default for pla
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I26a814d0e187a5b4946889039959f723385ec40a
2024-10-28 20:51:35 +08:00
66a58c26c3
ENH: modify filament params for pps-CF
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9d1f1840e8d94e6dcbb9e00bf9cfa1aa67cba8bf
2024-10-28 20:51:35 +08:00
720f8a4984
FIX: wrong filament vendor in bambu tpu for AMS
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If817a9012194ff701af8ce6cfa7e8eee6b87418d
(cherry picked from commit 79cf4df5539e55feda7112295885217d7a93da3a)
2024-10-28 20:51:35 +08:00
efe21f8b29
ENH: add Bambu TPU For AMS
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia4f275ce5ece55ed77e8724cfdff5705e839c92e
2024-10-28 20:51:35 +08:00
63be8a61fb
ENH: filamet shrinkage
...
Github: 2769
This feature ported from superslicer
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic92d248aa90222e6f74530f01876cc14944f2444
2024-10-28 20:51:35 +08:00
70a7e837d4
ENH: enable filament_long_retraction for A series
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7189a0a43736f45043f3600128db5aa03e2d2bfe
2024-10-28 20:51:35 +08:00
13b4213f8a
ENH: update some missing codes
...
jira: no-jira
Change-Id: Icb2da53911430ac144b0fb601637a7ad31e7e8db
2024-10-15 15:50:26 +08:00
d749e7dc6a
ENH: set ironing inset default value
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I91951fb4af92615bc5b3d04f04b561f9074cedc1
2024-10-15 15:50:26 +08:00
ef2e6002eb
ENH: add missing tooltips for some filament
...
jira:8247,8248
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8ec16260375f14495e60018c98818f914757ed7
2024-10-15 15:50:26 +08:00
d95781e244
ENH: enable long retractions for more filaments
...
1.Enable long retraction for Bambu PLA Basic,PLA Matte
PLA Galaxy,PLA Marble,PLA Glow,PLA-CF,PETG-HF,PETG
Translucent,PETG-CF,ABS,ABS-GF,ASA,Support For PLA/PETG,
Support For ABS in X and P series
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I765dd9184fcbbb11ae37d06d6160bec4aa92ac52
2024-10-15 15:50:26 +08:00
83b6a9ab92
ENH: set scarf angle threshold to 155
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8e8f74761a42c0f110116628f63b3ca813c18638
2024-10-15 15:50:26 +08:00
154608e881
ENH: update profile version
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I046acbc841204188ca50ae16bc17a3a31e8927bd
2024-10-15 15:50:26 +08:00
28fee5f65a
ENH: not apply z speed smooth on arachne
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I6821d79bad47326a46d3cfa265184c6114493f74
2024-10-15 15:50:26 +08:00
be220a6939
ENH: update profile version to 1.10
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifdd4a644ab91213bb393cfc9b34ce10116356552
2024-10-15 15:50:26 +08:00
bf19ea188e
ENH: add profiles for Fiberon filaments
...
1.Add Fiberon PA12-CF,PA6-CF,PA6-GF,PA612-CF,PET-CF,PETG-ESD,PETG-rCF
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib0b0504c85eee45189cd4bf946fcb1c9ff09275e
2024-10-15 15:50:26 +08:00
b8ee313220
ENH: add Bambu ABS-CF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id744312f40bdc8af556389ca578eb17d2c0f2690
2024-10-15 15:50:26 +08:00
afdd72b177
ENH: add description for filament profiles
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibdbc4335717c4260c65c6169095e44cdcb7f8140
2024-10-15 15:50:26 +08:00
1edf624077
ENH: add generic tpu for ams
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I5862eef974e15bb0d710d637632cbf9d174eaaf9
2024-10-15 15:50:26 +08:00
ef175abbfc
ENH: modify overhang_totally_speed
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib463a6438173396f441446571638c4f455d90937
2024-09-18 21:27:27 +08:00
f5b54f619c
FIX: no retraction after extruding compensation
...
1.Fix no retraction after extruding compensation for multiple
data lines in N1/N2S execution
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I05ef647a164aea6bfa9085e0eafed8d921796f06
2024-09-18 21:27:27 +08:00
5b8e612875
ENH:add X1E in PPA-CF
...
Change-Id: Ie53546927d87259897fd2b0d5348404dbf47b4cf
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
2024-09-18 21:27:27 +08:00
5bf2448a69
FIX: wrong vendor type in PPS and PPA
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6c9eb6dfdbd8648557282ec0612add65cc043759
2024-08-28 21:38:54 +08:00
99092f2ede
ENH: add Bambu PPA-CF
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ida8ec6f6eaff55203a7503f439ea999733f65d1a
2024-08-28 21:38:54 +08:00
c3e822ee99
ENH: add Bambu PPS-CF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7c355375b58eec19efc791a2f4da641d08cc2f60
2024-08-28 21:38:54 +08:00
65061a5475
FIX: wrong nozzle range for Generic PA P1P
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ida292e8885b74427852d5d2ad205b6f8368bd056
2024-08-26 17:23:33 +08:00
48abca1c95
ENH: use petg-hf as default petg
...
1.replace petg basic for petg hf as default filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibb82527e0fc373a50da7df287dc27b5998ee5510
2024-08-26 17:23:33 +08:00
c12ac11882
ENH: add bambu support for ABS
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie46e077d22b458a50a6d2ecb5163d990f669bd13
2024-08-26 17:23:33 +08:00
aadd29a9ae
ENH: update bbl version to 1.9.0.16
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I5dca8238f274c1d41a448e5b9a703bd04aabfcc1
2024-08-26 17:23:33 +08:00
997d1d73ff
ENH: add PETG HF
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Iee3acc3e54939ee88ce524d34dffdbddabb72576
2024-08-26 17:23:33 +08:00
05e7d72cd2
FIX: manual calibration K value not work for A1
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7a59885629164c96b6407944d2cee32dd61a3c89
2024-08-26 17:23:33 +08:00
758d087f15
ENH: add pctg type
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie01fcd4bef0d3ebec5bbd7185a87a1740068bdba
(cherry picked from commit c6276932dd92bc4283600954415eedeac6d351ce)
2024-06-21 09:15:34 +08:00
7e5db7210f
FIX: toolchange outside the trash box
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4140d3b0dfd1c71bb5566007ff4d726567e9b736
2024-06-21 09:15:34 +08:00
764095ca3b
ENH: update X1 start & end gcode
...
1.add printer start and finish music
2.sync code difference
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic800f0d243cb3b8b9559aaa95a68cda9c61ed706
2024-06-11 18:17:08 +08:00
01b04bf963
ENH: update PLA fan logic
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I82282e8a23cd56e6995c835e33c1b70675e20b04
2024-06-11 18:17:08 +08:00
9d286ee936
ENH: update A1 gcode
...
1.Modify the width of extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I90543758c866d74f2154e3135d7569109def84b8
2024-05-13 09:20:46 +08:00
86d345eee8
FIX: logic error in PLA fan control
...
github PR: #3948
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I28e4a673e590e83d151e92cc82caab45012aeabe
2024-05-13 09:20:46 +08:00
2c882da3e2
ENH: update A1 machine gcode
...
1.Adjust the y position of the A1 extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iea690a0184ae10a47f53e1532272c31fc0a04cfa
2024-05-13 09:20:46 +08:00
2a3b8d7a28
FIX: wrong default value for long retraction
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32
2024-04-23 20:07:49 +08:00
ba7cc12893
ENH: add long retraction for P series
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213
2024-04-23 20:07:49 +08:00
72a1c9ba6e
ENH: p series support long retraction
...
1. P series support long retraction in filament
2. Add long retraction params in common.json
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18
2024-04-23 20:07:49 +08:00
dacd176962
FIX: wrong filament id in some profiles
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8ff37e8685070cece63376cce8fce9df3d5030d9
2024-04-08 19:50:03 +08:00
023bd51532
ENH: add some new filaments
...
1.Add Bambu ABS-GF,Bambu ASA-Aero,Bambu Support for PLA/PETG
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I347c953b7bf2b0be79ca3f4b6eeaf7fa9cc31b62
2024-04-08 19:50:03 +08:00
0cd8e00df3
NEW:reducing purge through retracting filament
...
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
2024-03-25 15:29:19 +08:00
188873202a
ENH: update A1 A1mini nozzle volume
...
1.Adjust nozzle volume to 92
2.Update profile version to 1.9
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I8f54a64da7047f2631d62b87487a190e640563bf
2024-03-25 15:29:19 +08:00
087e1abafa
ENH: update A1,A1 mini start gcode
...
1. replace G380 with S3 to avoid collision
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I746e59b8cb18a21f281aa87a2c927c81748d6aea
2024-03-25 15:29:19 +08:00
a314d4ab2f
ENH: add M142 command
...
1.Add M142 command in filament start gcode for PLA
2.Add M142 command in X1C/X1E machine gcode
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I71ae4b20310924cad379a952d2fac478e8382d7e
2024-03-25 15:29:19 +08:00
1b1be9d59e
NEW: add some new filaments
...
1.Add generic pe-cf,bvoh,PHA
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I27ac9dec32a6ab74698c3746283bcbeca8379707
2024-03-25 15:29:19 +08:00
c373d6b198
ENH: add description in profiles
...
1. Add profiles in process profile
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I8d1f20aaae08c2dbc69926258384c2b7de0021ad
2024-03-25 15:29:19 +08:00
c7d4dba209
NEW: add more filament profiles
...
1. Add Generic PE,PP,PCTG,EVA,PP-CF,PP-GF
jira:new
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ib86051a8910b5831dddfd13ef736f4f421366b0d
2024-03-25 15:29:19 +08:00
7e9dc8b998
ENH: update profile version
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I23b2fa5c1415917a80ee7abd5f3eb5c48b64baeb
2024-03-25 15:29:19 +08:00
53a4de5674
ENH: add new filament type PA-GF
...
1.Set Bambu PA6-GF type to PA-GF
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I79b4896ed9901e8525fd770f4a37713729b7e420
2024-03-25 15:29:19 +08:00
9b8a59c0bd
NEW: add filament Bambu PA6-GF
...
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I4305f87aa84054551396fab772e50fa262d9a2b5
2024-03-25 15:29:19 +08:00
b5ad12dd09
NEW: add filament Bambu PVA
...
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I80e296f3ecc2027369749716980716de7be972f9
2024-03-25 15:29:19 +08:00
19d8ed601d
NEW: add filament Bambu PLA Galaxy
...
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I454e1353a0328dc0ddae15eddd1b3ee46a5013e4
2024-03-25 15:29:19 +08:00
9ceb622d4c
ENH: update A1,A1 mini machine gcode
...
1. Update A1 machine gcode.Add multiple layers head wrapping detection.
Avoid the issue of excessive load angle in G28 X.
2. Correct some spelling errors in A1 and A1 mini machine gcode
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia830d45842ed7797c89babd3f05c00abc5db0c4c
2024-03-25 15:29:19 +08:00
207e48ce86
NEW: add profiles for PLA dynamic
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ib7d8f9d374e5c8b3f7dabcf204669fbadbb4f4ab
2024-03-25 15:29:19 +08:00
f2fc7155ae
ENH: update petg max_volumetric_speed
...
1.Update filament_max_volumetric_speed in PETG of A1
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ibcb2042040ca5719fd6fd92c73b84e3ed6ad5d60
2024-03-25 15:29:19 +08:00
xun.zhang
zhimin.zeng
qing.zhang
RikshaDriver
lane.wei
Leon Fisher-Skipper