d45ba14b65
ENH: remove invalid params in profile
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iee2382235e6ac473a0dfcc60cfda18196139f334
2025-03-24 09:18:36 +08:00
b952dffa60
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2c2d8b988932bc9c9ee71509f73c8d7e0107627d
2025-03-24 09:18:36 +08:00
beaffaffe3
ENH: updata some tooltips
...
and remove fdm_filament_tpu useless configuration
jira:none
Change-Id: Ib2f35701af687b22c39bf8aff4dc6be62f80e32a
2025-03-24 09:18:35 +08:00
0c12fda23d
ENH: update profiles for TPU 85A
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I27b5a6a555ca2c9f2666eb116343dc2be189bbc9
2025-03-24 09:18:35 +08:00
fb74c33625
ENH: add bambu tpu 85a and 90a for a series
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I1975bd3421b4076d113a8f9000616a74efadbc03
2025-03-24 09:18:35 +08:00
ecc082cf69
ENH: modify circle compensation parameters
...
jira: none
Change-Id: Ib25d63b738a32b0f495140e10a32161357d66b9c
2025-03-24 09:18:34 +08:00
4f16cefc3d
ENH: update machine start gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I50bb4fc2378e4da1b7c788616bf3d4800dd410d0
2025-03-24 09:17:16 +08:00
69684a51b7
ENH: close scarf seam setting for pla lite
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I491e8a5240818687b5caff9d44f22d455c0a53d7
2025-03-24 09:17:16 +08:00
cbaf4d9a12
ENH: Revert "ENH: remove bambu tpu 85a temperoraily"
...
This reverts commit 74f0c8a63c220d688b503bff87f927c94749eef9.
Reason for revert: <add back now>
jira: none
Change-Id: I07c42c264b820fdd5beff1556f6615b22e278b28
2025-03-24 09:17:02 +08:00
308bcdeae9
ENH: update params for wipe tower
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If56a0858dcc768a9038189bea8eaad3995435d11
2025-03-24 09:17:02 +08:00
d17f558610
ENH: update H2D start machine gcode
...
Jira: none
extrude 5 mm in place before drawing the pre-extrusion line
to ensure the filament stick to bed
add a dirty detection feature for carmera
support dual-head high-low temp check
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia365d99fe764acf4815d24cfb96532b6f1d79990
2025-03-24 09:17:00 +08:00
ccf58b3fc6
ENH: set cooling/heating rate as extruder param
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia5eb6ba5bea0351ebcc3867644a518fb5560e500
2025-03-24 09:15:31 +08:00
11ba41c7ab
ENH: sync timelapse gcode for h2d
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I304410a6265e8ab4bb16435cb1c21f906c355e76
2025-03-24 09:15:29 +08:00
05cc1ae808
ENH: update gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iea232e323b7859affe217d86f685db2d7e997a4d
2025-03-24 09:15:29 +08:00
40654323b0
FIX: opposite value for detect floating vshell
...
1. Also add default values in profile
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I70eb017a63fa55b40f3f62b4f31da0179ebc5abc
2025-03-24 09:15:28 +08:00
c8ceb4ba38
ENH: add x1 in bambu pla Lite
...
1.Also modify max flow v
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4dc196c452ed1f72119103adfa1e0567ecae4c9f
2025-03-24 09:14:26 +08:00
2581925e4b
ENH: add profiles for Bambu PLA Lite
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2072a34ee5614f702eced636e163e8d06eb07279
2025-03-24 09:14:22 +08:00
8c1ed01948
FIX: fix the parameter value
...
jira: none
Change-Id: Ie8cc7df76be9179d88cbba6db5fd189b9725cd76
2025-03-24 09:12:13 +08:00
6be306e548
ENH:update image for plate type
...
jira: none
Change-Id: I590bf9d6596ccf5cd6e06844fb3ed247fa526ba6
2025-03-24 09:12:10 +08:00
f3c7411351
ENH: get symmetric pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If428ead5f938ba4735786604468b1540d307142d
2025-03-24 09:12:10 +08:00
5bd2ad1806
ENH: update gcode for X1E
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I161e9c65c24c3e35d2edb026aa9790ce02d9aff7
2025-03-24 09:12:09 +08:00
323aba74f3
ENH: update params for Bambu PETG HF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2eee5275f14f2599aa434379555bee4d1c45f9aa
2025-03-24 09:12:09 +08:00
4dbb770805
FIX: modify the circle compensation parameter
...
jira: none
Change-Id: Ib0290dd0651c6802737407336b1d2838b65496ad
2025-03-24 09:12:08 +08:00
85840593fc
FIX: correct strength_z for filaments
...
jira: none
Change-Id: I5ac7677ad992bc8cbd66af8dadaa04f1887747da
2025-03-24 09:12:08 +08:00
704a4a380c
FIX: Speed is displayed incorrectly in GCodeview
...
jira: none
Change-Id: I15a801c73503c0a3ebda64838fc5f82a4d46458f
2025-03-24 09:11:29 +08:00
f2e861af90
ENH: update chamber temp for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id41f610f5314c82cbebfaa93c9b81fe1f472dc5a
2025-03-24 09:11:29 +08:00
6781a874b5
ENH: update profiles for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I17defcdf2bc665442c2d7c3b9f1922b4b2fe7f4b
2025-03-24 09:10:30 +08:00
0c242ddaaa
FIX: add default value for top/bottom_color_penetration_layers
...
jira: none
Change-Id: I9fce470daf4318ece2313a66670c9ebda7580eff
2025-03-24 09:04:48 +08:00
52e05ed0d9
FIX: fix the error scale of circle compensation
...
jira: none
Change-Id: I5c27ef8312e75666dc1c5c2c7dedf3f7e4831497
2025-03-24 09:04:48 +08:00
a13c472816
ENH: handle legacy for ASA-Aero
...
1.Change ASA-Aero to ASA-AERO
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I49c4c31b9928e07b67b9893a4b204c2418089f17
2025-03-24 09:04:47 +08:00
bc446854ff
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3de9ef68ef727d58adac5c6025e50d1fa318177b
2025-03-24 09:04:23 +08:00
22499a552e
FIX: the timelapse gcode is not generated in spiral vase mode
...
jira: none
Change-Id: Ibb73fab7f51e5a81bd32b6e5df18a095f2aa30d3
2025-03-24 09:04:23 +08:00
69c2947daf
ENH: add new way to set bed temperature
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I99a9f67e9b13b2137ad371b22cf0999ccf9c096d
2025-03-24 09:04:22 +08:00
69edcd530f
ENH: add pla glow for a1 mini
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic24a3909297f863dd2fc6c2239ca5f084bd7abc7
2025-03-24 09:04:15 +08:00
0f6d691597
ENH: update profile for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd5c507c6e9db4a74f68389a9b7ac476679fcc5f
2025-03-24 09:03:57 +08:00
ec2b5bf690
ENH: add skippable part time for other printers
...
1. also add a new type: head wrap detect
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8d3056676958245d44171870b6d21ec0ea8bdfe0
2025-03-24 08:40:49 +08:00
853f899500
ENH: remove bambu tpu 85a temperoraily
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie45b497ad5a838a45e819467944775ffaaf955fa
2025-03-24 08:36:36 +08:00
8d10dcd046
ENH: add profiles for TPU 85A and 90A
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ica88ced8d2e0dbb1bdff0d4b80863bd98102ff16
2025-03-24 08:36:36 +08:00
ff37dbdf79
ENH: remove unused keys in profile
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib54b300a3c10ec45acf4aa842c1162bad5bdb289
2025-03-24 08:36:11 +08:00
2e3edc4518
FIX: wall count fixed && overlapping of interface filling path
...
jira: STUDIO-10419, STUDIO-10420
Change-Id: Ib7274420ceb8149a02e82d896757ce5ace908fb9
2025-03-24 08:35:26 +08:00
fe9073696d
ENH: modify filament config for petg hf and pla basic
...
jira: None
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I46528a07a9e1d3f7422106636b405022811d78e6
2025-03-24 08:35:25 +08:00
6e74a4a77b
ENH: seperate timelapse time in preview
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8cc57c70743019baeabe365dbec73affdf5149fe
2025-03-24 08:35:25 +08:00
3e0b6eb228
ENH: generate framework for all layers
...
jira: none
Change-Id: I95f35ba45fe9f544c53bdf0c5a52a70bd45ee7a9
2025-03-24 08:35:25 +08:00
6e9cb17dd3
ENH: dulicate setting id and error preset file
...
Jira： none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I07e6fe63f7272134f5d113c14bd7b32eb620fa27
2025-03-24 08:35:22 +08:00
82d13205d5
FIX: h2d do not support timelapse in sprial mode
...
jira:STUDIO-10402
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5d012a4665bf5715d90fcb973a589d3a500ded13
2025-03-24 08:34:31 +08:00
fb5bf37336
ENH: change infill params' name
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I864f24a335d59b4ee6ae474c9a338cd2fbc2ebf1
2025-03-24 08:34:31 +08:00
872726abed
ENH: add cross zag pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If11f423db443b3f31f2181d4b0c56eaeb9a7ca5d
2025-03-24 08:34:30 +08:00
09c0b004cd
ENH: update H2D filament retraction of matte
...
Jira: 9900
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9e8f962796b7301fff7c8ae4e74db548771bd14e
2025-03-24 08:34:29 +08:00
16813aa460
FIX: missing gcode line caused by gcode GCodeEditor
...
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
2025-03-24 08:34:29 +08:00
f2cb4f747c
ENH: improve quality of interface
...
1. change type of transition layers below interface to erSupportTransition,
2. fix the number of transition layer above tree branches,
3. change the default setting of support_interface_pattern to smipRectilinearInterlaced,
4. change the default support_style to HybridTree when interface is soluble
5. FIX: conflict between xy_expansion && split_hole
jira: STUDIO-10239, STUDIO-10314, STUDIO-10319
Change-Id: I3eb392ccd005acedb001aa862d5bf3eb104c5293
2025-03-24 08:34:00 +08:00
xun.zhang
jiangkai.zhao
zhimin.zeng
qing.zhang
zhou.xu
jiaxi.chen