1. The line id in filament block and exturder block
is assigned during first gcode process. So we should
add offset caused by gcode processor to line id
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6a24b052fdf0daa3506c5f0982b521e85107f193
1.Add a Trietree to match command instead of the switch sentence.
2.Support VM104 and VM109
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5f6b3d1bf87baebc0a20c2589a5138538469dfec
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
1.Rely on nozzle change tag instead of T command to detect
extruder free range
2.Support enhance cooling for TPU filaments
3.Fix a negative temperature issue
4.M104 commands add params to specify that command is generated
by slicer
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2d157e5a84da75e656d3281cf38eea8697bd897a
1. Pre cooling extruder after the extruder used
2. Pre heating before the extruder used
3. Refine the structure of finalize function
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I98c92763c006fc9564db45a4a5d542b891ea1aa2
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
1.Save multi extruder state in gcode processor
2.Add machine exturder change time
3.Fix some naming issues
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9785331290515eeb908ff0ff01aad5aac44212d9
The existing implementation did only read the new Z position from the injected timelapse_gcode and flagged the position as unsafe because of this.
This change reads X, Y and Z pos from the timelapgse_gcode and will keep the position state correct to enable safety checks required for using spiral Z hop.
Because of this, spiral Z hop can be used everyhwere now. The same pattern is also applied for layer_change/toolhead gcode injection.
The set_current_position_clear method is unused but will be kept in implementation for future scenarios.
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
1.Fix filament can not map if it's not used in model body
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibd2685ffd198b2e17dbf44289d0144b5b7c25788
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
Jira:none
BBL:Merged scarf seam and
add imorovemnt to improve seam on defalue setting
--as default setting wipe before rectract get good seam on end
--clip slope at start and end
--clip more on inner wall slope start than outer wall
--slowdown slope speed to get better sea
--todo-slope path had error double dE
reduce it could improve seam,but slope could not stick well.
--check slope path overhang and avoid it while on conditional scarf mode
Co-authored-by: qing.zhang <qing.zhang@BambuLab.com>
Change-Id: I583a1c25e534b2aa5c9d710dcf207aefbea64347
1. Add bed macth result after doing gcode export,according to filaments
used in first layer
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icf70fce0310b86fffc5276fb8fb3bf4cc14afcb0
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
xun.zhang
zhimin.zeng
jiangkai.zhao
lane.wei
qing.zhang
SIMPLE MARK
ziehmon
Leon Fisher-Skipper
Noisyfox
Dmytro Chystiakov
salt.wei