allow generate wipe tower when print ByObject if there is only one object
Change-Id: I199e9cab7bd7c963edf58e829c663bb91c12f4f8
(cherry picked from commit 7153c30800022f3afb9811c67f88ba28c9b25d20)
even though there is only one color, the wipe tower is still exist
Change-Id: I5c68a4ca7239cfc74aba452a6588d74f6d622f47
(cherry picked from commit 032c2e6718c65aa4c5b18eecd0ccce27f3f489bb)
1. When sharp tail region suddenly grows a lot, it means it connects to
a well supported region and is no longer a sharp tail.
Jira: STUDIO-1862
2. First layer of sharp tail can not be reducible (must have extrusion,
i.e. won't disappear after slicing), otherwise thin spikes at the
top of the object are also treated as sharp tails.
Model: knight_seadra
3. Increase sharp_tail_max_support_height to 16mm
Model: Crane_reversed
Jira: STUDIO-1859 (for this issue I don't what is the exact cause,
but adding these three improvements solves the problem)
Change-Id: I3cd57b184d78dba8862ab3c214057ae78fe49d1f
(cherry picked from commit 9242c6a6d1f23f11ebc43a9049ce10229a15c60e)
Detour travel is wrong in multi color printing when
current position is unclear.
Don't generate detour travel in this case to avoid
colour mixture.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2d24b04d99b8a0b34a46c9f88e522e97cb0fe354
1. Previously we used integer Point type to detect corner, which was wrong.
2. Delete duplicate points more aggressively to prevent too many points
around curved overhangs.
3. Do not generate roof_1st_layers if there is no interface at all.
Change-Id: I1167ac04c533ec8f29dc9e656ba7072d1b54197f
(cherry picked from commit 1329347c4bf9c8207cf21e591a6ad113bb565673)
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. fix possible empty layers (caused by continues walls)
2. fix normal node may be absorbed in drop_nodes in "tree hybrid"
3. popup message to ask the user to select best parameters for tree strong
and tree hybrid.
4. auto select lightning infill for tree hybrid.
Change-Id: I7d172887a9b0e4f268267684e83fc02dc7ec6a0c
(cherry picked from commit bc6d130e86c252d7fc1f84c4df7da95050dd5d51)
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. smooth nodes' positions
2. draw ellipse along movement direction
3. fix a bug of radius not smooth
4. fix a bug of Tree Strong having too large radius
5. fix a bug in plan_layer_heights: when wipe tower is
enabled, independent_support_layer_height is false, and all support
layers should be exactly the same as the object.
Jira: STUDIO-1785
6. move support style popup message to on_value_change, so only show the
popup when the user changes support type or style.
Change-Id: Ibced7a28f436d96000ee35a7194b68bb5a20a32d
(cherry picked from commit 0d814b07e433533c8de1b7a04bf52b577de0778d)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
fix bug of empty layers when meeting similar large layer height of tree support
TODO: hybrid(auto) still has dangling layers at the botttom.
Github#826
Change-Id: I6d5dfa9a610403e51ea82c1d86444f8645dc3210
(cherry picked from commit ea38988f0b5ba22c5b7c3b212d510f649dd23301)
New function plan_layer_heights added for pre-planning maximum layer heights
Previous adjust_layer_heights function has been commentted out.
Change-Id: I8ec5bb7b7e700ed7655d18a17d0b15de5f026592
(cherry picked from commit 55995c138e0375b8055f31768eea1392cd64168d)
If don't do this, laoding old 3mf generated by version 1.3 or lower will
have problem, e.g. normal support will be replaced with normal(auto).
Change-Id: Iaa8e1f8badaacc74479d99a6e4153d8850945279
Add large cost when bed temp is greater than object's vitrify temp
STUDIO-1623
Change-Id: Ib73d312fce7b80999f11d1f6c172a9c1575937b4
(cherry picked from commit aed896d44776c9cd2fd55202420a3811bc117896)
[STUDIO-1717]:
1. Add area filter during finding the orientation vectors.
The vector with largest area will be selected.
2. Area_accumulation function return the accurate normals.
Change-Id: I917e29a0def4904a82d30cf0a92524bbb0da14c1
(cherry picked from commit a79cf2fa89c7247cab37ebd36974529df79f0990)
[STUDIO-1676]:Auto-orientation not OK but manually OK.
When accumulating overhang, the bottom condition should select 0.5* layer
height rather than previous 1 * layer height.
Change-Id: Ide96817b8f98827388b7cb73ca33518b3ff25235
(cherry picked from commit 9f90151236340d3a10790112be65c816dcc3ae30)
As title
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82a17cd8f82a87a898f933b5437836667136d834
(cherry picked from commit aedfffc4565113f186a55efa0e89366880a22fc6)
This is useful and need to be tuned
for some special 3-rd party filament.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0527484d47c1bb9c89d5cc70bbaa34b5078b7e43
when loading third party 3mf, sometimes there is no object name
just named these object to 'Object_index'
Change-Id: Ie73f49ffa79e996114b7a2095de4de7d41bfec24
1. export compatible related values to 3mf
2. process compatible related values when loading
Change-Id: Ib7ed3d165cda5d62e0074652d474567494141631
(cherry picked from commit 989fe6439d573457fa78afc5376d04d3120dbbfd)
zhimin.zeng
lane.wei
qing.zhang
Arthur
salt.wei
MusangKing
Zhaofeng Li
miaoxin
yifan.wu
chunmao.guo
liz.li
shuai.liu
‘shuai.liu’
Stone Li