mozhe
/
BambuStudio
5
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,151 Commits 3 Branches 0 Tags 638 MiB
Commit Graph

3151 Commits

Author SHA1 Message Date
xun.zhang 977ae079c8 ENH: add support for chamber_temp and exhaust_fan 
Support controlling chamebr temperature and exhaust fan for air filtration

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
 2023-11-01 09:11:19 +08:00
wenjie.guo 4121960292 FIX: allow changing ironing angle. 
allow changing the relative angle between the top surface and the ironing.

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I85e8ff3d05d3a6d9408da011631e7d71a6d85178
 2023-11-01 09:11:19 +08:00
qing.zhang 4fce50453c FIX: no soild ironing if top or bottom shell is 0 
fix the ironing be apply to the preview layer of bridge

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I53cb4e6ff80176953c2927c1d9dc5eecc590764c
 2023-11-01 09:11:19 +08:00
chunmao.guo 6b5ba84075 ENH: [STUDIO-4029] ipcam compatible remake 
Change-Id: Ic6cda7daa6a4e3b03fe645d8ae60f1e68a2c3864
 2023-11-01 09:11:19 +08:00
chunmao.guo 182cab1f14 NEW: [STUDIO-4029] add printer compatible configs 
Change-Id: I2ff30c3612730bacc868b5f23b10496a370d6735
 2023-11-01 09:11:19 +08:00
chunmao.guo 5ba829337c ENH: [STUDIO-4029] apply new device compatible settings 
Change-Id: Ic807c747d77ccbe99b3b157c2e6d3e3a2945e1ac
 2023-11-01 09:11:19 +08:00
zhimin.zeng 13857dba34 FIX: modify the default position of wipe tower 
Change-Id: I27eacb73a7e32d20416da785378d3ff0c31f5c23
 2023-11-01 09:11:19 +08:00
tao wang 9560a292f2 FIX:check if the printer and preset are the same 
jira:[STUDIO-4018]

Change-Id: I69ea1e3f8e8214ae68464665e1e7260fcc41dd82
 2023-11-01 09:11:19 +08:00
wenjie.guo ba3638e70e NEW: allow changing the angle of ironing in the dep mode. 
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I09348096fd19ee4e07ce3a04ae152f7ee5758767
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
 2023-11-01 09:11:19 +08:00
Arthur edcdad162e FIX: tree support bottom interface layers were not correct 
The bottom interface layers were not right when "independent support layer height" is enabled.
This commit ensures there are always 2 bottom interface layers and the gap
is not less than specified. However, the gap may be slightly larger.

Jira: STUDIO-3842, STUDIO-2138
Github: #2127

Change-Id: Ifd8fbc4c7bc6dd92f2534fdd0179458a9e93c79a
 2023-11-01 09:11:19 +08:00
liz.li 6cf4f072ce ENH: text translation about first layer seq 
Change-Id: I4e9571e9467c95d70c9c2554cb1a90c95d4079c9
 2023-11-01 09:11:19 +08:00
zhimin.zeng 9f88906587 FIX: remove Tolerance test and modify wiki link for mac 
Change-Id: Ieca66b0226eef692191e9e7bed56e54dc9d7b40c
 2023-11-01 09:11:19 +08:00
liz.li a6ab8314a4 FIX: modify title text Jira: STUDIO-4007 
Change-Id: I1826f72ba8e09b22481aa096fd5c1f881410d08d
 2023-11-01 09:11:19 +08:00
zhou.xu 6f8005c306 FIX: improve brightness for the slice of black model 
jira:https://jira.bambooolab.com/browse/STUDIO-3992

Change-Id: Ib25112af68bb9a86b13f9b0c6f4a8229e6d2a15f
 2023-11-01 09:11:19 +08:00
just-trey fee6bb098a ENH: Thanks @just-trey for updating Anker profiles 
Update Anker profiles and includes the new AnkerMake M5C printer.

github pull request: 2125

Change-Id: I1b2a78f3404273550fc0030b0bda425628051506
 2023-11-01 09:11:19 +08:00
maosheng.wei f7495612fa FIX: add small disc stl 
Change-Id: I5c6c8ca1d4a15fc1462fe47d2e5e37b459f9a9a6
 2023-11-01 09:11:19 +08:00
SoftFever 238a377155 ENH: switch ironing_type to no ironing 
This modification is based on Orca's commits 61db1ef3692

Commit: 61db1ef3692671a0e0a2d204a353fd3d3572edd8
Parents: a1bc4b3a5758dec9f9c68459684f7cc94cd41e4e
Author: SoftFever <softfeverever@gmail.com>
Committer: SoftFever <softfeverever@gmail.com>

misc profile fixes

Change-Id: I7fd63325073112553a3f8d0387b5109442ac2f30
 2023-11-01 09:11:19 +08:00
Lee Colarelli 3070e76849 ENH: Add Anycubic Kobra 2. 
This modification is based on Orca's commit abc0f1c68279c4adf1

feat: added Anycubic Kobra 2 (#1765)

* feat: added Anycubic Kobra 2

Signed-off-by: Lee Colarelli <lee@leecolarelli.com>

* fix: corrected buildplate texture size

Signed-off-by: Lee Colarelli <lee@leecolarelli.com>

* fix: corrected max layer height

Signed-off-by: Lee Colarelli <lee@leecolarelli.com>

* fix bed model

---------

Change-Id: I5a82ae29385e8e66499503f40357166d60fb6d2a
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
 2023-11-01 09:11:19 +08:00
zhimin.zeng 5d254cd0bd FIX: Flow Rate Calibration Pattern too crowded with 0.8mm nozzle 
github issue 2296

Change-Id: Iee766680c26ab5ca826961f53f8963d802a25397
 2023-11-01 09:11:19 +08:00
zhimin.zeng 21abdb24da FIX: replace ',' with '.' when using minor languages 
Change-Id: I992f4c702141f89860625f64d9524ee1c0445cee
 2023-11-01 09:11:19 +08:00
gerrit e1178d122a ci: update build version to 01.07.03.51 
Change-Id: I3ef35342cd2b2177a1260f994923fd85f7aae0b2
 2023-11-01 09:11:19 +08:00
lane.wei 58a5db2607 FIX: config: update config with correct logic 
1. remove other vendors
2. set the version to correct one
jira: STUDIO-4009

Change-Id: I804bb1d08a9d241bc323a22b0d3fb40f7c9c3c9a
 2023-11-01 09:11:19 +08:00
lane.wei ecaa5fa2e6 FIX: CLI: add logic to allow use cached_data while printer size change 
when print profile created on small printers
the cached data should also be used
JIRA: MAK-1658

Change-Id: I31e801bd3116838baaeaef44f4aa6d53d65aa058
 2023-11-01 09:11:19 +08:00
maosheng.wei f87996960d FIX: [github 2259] Maintain development mode when reopening BBS 
Change-Id: I9cd6bddbc58f7841499665e21dc606b35c706afc
 2023-11-01 09:11:19 +08:00
thewildmage c0a247994c NEW: Add Ellis' pattern method for pressure advance calibration 
Add a new calibration pattern method for pressure advance calibration, which can better test the influence of k value on the corner. The changes of this patch are picked from OrcaSlicer by thewildmage, thanks to thewildmage for the great work!

github issue: https://github.com/bambulab/BambuStudio/issues/2222

Change-Id: Icc8fd4d52b20c1668bfa08716b48549dfada515b
(cherry picked from commit eb72d8b681bef270906406a2d10a36d4efbce900)
 2023-11-01 09:11:19 +08:00
chunmao.guo e7bd5b9bb9 FIX: missing include url.h in WebViewDialog 
Change-Id: Ib463a80ab9d5002c52fe5718254f6c91a6cd168b
 2023-11-01 09:11:19 +08:00
zhou.xu 780d9a7e93 FIX: add cursor and enter processing for plate name 
github:https://github.com/bambulab/BambuStudio/issues/2262#event-10081065971
jira:https://jira.bambooolab.com/browse/STUDIO-3992

Change-Id: Ie6120a8ff99f9568f9e42800429a1c5b378fc28f
(cherry picked from commit dbfc17943fa912470f26de1615088c87bd022b4e)
 2023-11-01 09:11:19 +08:00
salt.wei cb38b71825 FIX: should consider plate offset in wipe tower 
Updating position to gcode writer in wipe tower
miss plate offset.

This is handling for github issue #2256

github: github issue #2256

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
 2023-11-01 09:11:19 +08:00
maosheng.wei 2a996d40b6 FIX: [github 2246 2209] reload form disk not working 
Change-Id: If70d7b700c454e9290741980afb0a1fd73a1fa5a
 2023-11-01 09:11:19 +08:00
maosheng.wei d8b56977b9 FIX: STUDIO-3745 open gcode.3mf, unable export to file 
Change-Id: Ib8a45cb38f28438ecc4d2a772f1437dbd324078a
 2023-11-01 09:11:19 +08:00
chunmao.guo 5eba42b565 FIX: use current_language_code_safe() for valid language 
Change-Id: I480730055588aa76bd40f35e6c4bcbe9833c330d
 2023-11-01 09:11:19 +08:00
liz.li af534509b3 FIX: meshboolean set transformation matrix twice 
Change-Id: I1428c66f69bbd14fa0485bab23b0a26b8e7b6dba
 2023-11-01 09:11:19 +08:00
zhou.xu 9b980c9bc6 FIX: The cancel button should not make plate name valid 
Change-Id: Id2b3935e87d443f5a594fdd588a63e502c0321e5
 2023-11-01 09:11:19 +08:00
liz.li 060b41707e NEW: first layer printing sequence 
Change-Id: I19e39a27cf972eb859e51a334aeae8f57ee263f8
 2023-11-01 09:11:19 +08:00
Stone Li a75d024485 NEW: support korean and russian language 
Change-Id: Ie29a6304906415e2e71f0dc8ee99ffc65b1a1708
Signed-off-by: Stone Li <stone.li@bambulab.com>
 2023-11-01 09:11:19 +08:00
maosheng.wei 93cf701be5 FIX: [Jira:3864&3728 github:2227] translation issue 
Change-Id: I375e72191b3af1cf389e65ff4b62ed4f77d8f76a
 2023-11-01 09:11:19 +08:00
chunmao.guo e7598e6406 ENH: [STUDIO-3911] web view drag drop on macOS 
Change-Id: I92e7f6135152e4bfaf7f7342cdff1ea2e269c5a5
(cherry picked from commit 3452e6edebeecf499d44798ff6b85425ab244cb4)
 2023-11-01 09:11:19 +08:00
chunmao.guo d30470d603 ENH: [STUDIO-3911] load as model file when drag to home page 
Change-Id: I1d8986ca4984fea418371f253a48a9593bb9b1af
(cherry picked from commit 685edaa145cd4b4ce4afce00ae81d78305f84e84)
 2023-11-01 09:11:19 +08:00
chunmao.guo dee1c04f28 FIX: load from gcode stream crash with null model pointer 
Change-Id: I09a17dd5726d164a4e0bc1d5f213581832a17a5d
 2023-11-01 09:11:19 +08:00
chunmao.guo a9e436e557 FIX: [STUDIO-3735] unload default user filament/process presets 
Change-Id: I24e54823e91ea8f6cad9bfbdf69ee838e75f8190
 2023-11-01 09:11:19 +08:00
chunmao.guo 163d279851 FIX: [STUDIO-3891] check config update after sync 
Change-Id: I82e409f0d3649a371cbe0f8ee9a5f9ad1a267fc8
 2023-11-01 09:11:19 +08:00
chunmao.guo ed82262ca8 FIX: [STUDIO-3736] show download failed dialog & cancel task 
Change-Id: I25830b29ffaaced26fcee8290ccfcce590e3963a
 2023-11-01 09:11:19 +08:00
chunmao.guo c288f26645 FIX: [STUDIO-3891] move printer image to profiles path 
Change-Id: I40755109fcab4532cfe7d2314accc7d9f61c249c
 2023-11-01 09:11:19 +08:00
chunmao.guo 0cd8d5cd78 FIX: input ip dialog not show for liveview 
Change-Id: I422b89eae3c9b9049416f2460bacb4cc991ca605
 2023-11-01 09:11:19 +08:00
zhou.xu fd89e4c256 FIX: remove N1 setting and auto match textures based on printing area 
Change-Id: Ia208c7436901a722c8c4e2caa3d7573fd0714432
 2023-11-01 09:11:19 +08:00
tao wang 771bc38a02 ENH:support setting chamber temperature 
Change-Id: Icacd3f248a8f4dbff6c928e666f986c62801eebd
 2023-11-01 09:11:19 +08:00
liz.li 403c5e825d ENH: modify device upgrade page 
Change-Id: I16c91c6e7b9c4c44307425e343b260ed873a695d
 2023-11-01 09:11:19 +08:00
liz.li c414c66d73 FIX: entering save page likely to crash 
Change-Id: I50130e8c75bdeb82a347621250842e8f55fe24b1
 2023-11-01 09:11:19 +08:00
salt.wei 22aca74e5b ENH: remove the single filament limitation of skipping object 
We planed to skip uncessary filament changing when skip
object. However, this caused color mixing.

If we try to fix the color mixing issue, the flush gcode
should be generated by printer itself. This is not a short
time job.

So currently we never skip changing filament when skip
object. This will not save much time and flushing. But better
than none.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6046cd2765cf68058712b4256402acc0be771144
 2023-11-01 09:11:19 +08:00
zhimin.zeng d5120f890e FIX: crash when use manual flow rate 
fix the PA tower is effect

Change-Id: Idc00090c75023d62beca2a32529a6749081de9ef
 2023-11-01 09:11:19 +08:00