9bf251c54c
ENH: add printer structure in code
...
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I57c24a0ea977b510932970817d67570ab3fe7bc4
(cherry picked from commit 409f03de471f65b9edf5c733b691e280c18c19cc)
2023-11-01 09:11:19 +08:00
4ac098df4d
ENH: reorder wall seq for inner outer inner mode
...
Enhancement on wall ordering for inner outer inner mode
Github pull request: #2182
Change-Id: I0902ea0c728f7e37a1a43f9796997f33d37a9940
2023-11-01 09:11:19 +08:00
c553844b05
FIX: sort m_extruder_option_keys lexicographically.
...
Github: #77
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I8832a3848231da8b1066688a2471acd6b6122c19
2023-11-01 09:11:19 +08:00
eaca2bd0ed
ENH:delete U0 firmware functions
...
Change-Id: I6a65f41224e346023989bd1f097d4bf1b069f907
2023-11-01 09:11:19 +08:00
4a143ed8b1
NEW: add bottom setting for height range function
...
Change-Id: I0a818dde1e44e9f4475222038916c5ef992461de
2023-11-01 09:11:19 +08:00
ee478072c8
ENH:image to base64&supports uppercase file names
...
the issue occurs when trying to convert an image with uppercase file names to base64 format.
Change-Id: I1b3b4b95ae5602affc7c2d7c584fdc459d90ee0d
2023-11-01 09:11:19 +08:00
54d5e9df8f
FIX:fixed some unsupported HMS messages that cannot be displayed
...
Change-Id: Ib5acffb1e2c94bae56aed89fbb71a7a15a660485
2023-11-01 09:11:19 +08:00
46a48539bb
FIX:block HTTP links&open in default browser
...
fixed:https://jira.bambooolab.com/browse/STUDIO-3030
Block web page redirect requests and open them in the default browser
Change-Id: Ie79f8259859fa6ba158f31710179a8c7c53d6fa4
2023-11-01 09:11:19 +08:00
297e4d1373
FIX:fixed send button refresh too many times
...
Change-Id: Ifb0b9e4d2e6ed7997ba7f033d555ea3aeec9fa9c
2023-11-01 09:11:19 +08:00
ae7a9303b8
ENH:no longer using config that support_virtual_tray
...
Change-Id: If578b66de609e5703bc6e912c744f10becaaebed
2023-11-01 09:11:19 +08:00
23dc1ec960
ENH:dynamic display of AUX fan
...
Change-Id: Ib2b5578567eaa6fde15fdb54bdf24063b627d2d7
2023-11-01 09:11:19 +08:00
7a7a9f4296
ENH: add top_area_threshold param
...
Jira: 4136
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic8a3d05cea769ae92dd5f2f2fcd685d660075c95
2023-11-01 09:11:19 +08:00
022445b272
NEW:supports new layout of extra AMS
...
Change-Id: Ib00d7c2e1c09a2fbe2de739e1c7cc35e03900edc
2023-11-01 09:11:19 +08:00
a980b78172
NEW: Z hop restriction
...
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
2023-11-01 09:11:19 +08:00
d78bb9e1f4
FIX: short edge collapse algortihm
...
so that it does not decimate all triangles on very high detailed models
Relevant issue 8834 Access Error when slicing
Github: #2283
Change-Id: I047361c88c561962ef4d3cf67bc0126402c41941
2023-11-01 09:11:19 +08:00
86675c4caf
ENH: [STUDIO-3151] Optimize scoring entry
...
Jira: STUDIO-3151
Change-Id: I6ffd236faea7de9f1e35b77f818f926f2477939a
2023-11-01 09:11:19 +08:00
91cdfbf286
FIX: [github #2209 #2246 ] reload from disk not work
...
Github: #2209 #2246
Change-Id: I12ab1e08eaeff334315136914f0c20cc2c78fd98
2023-11-01 09:11:19 +08:00
342b8d7338
FIX: CLI: fix some issues
...
1. JIRA: MAK-1727, color of thumbnail not correct
2. JIRA: MAK-1723, model upload outside issue
Change-Id: I1754d730021c9df8044248e931023899d410d8de
2023-11-01 09:11:19 +08:00
6e6c28b0ee
ENH: Element Text can not be selected
...
Change-Id: I2c837306c9ebc38c371cf944f558ec3009ee9d26
2023-11-01 09:11:19 +08:00
981a46920f
FIX: the position of wipe tower is nor correct when multi-plate
...
Change-Id: Idabea67591102ee0f4595793e1ab027e805ace7a
2023-11-01 09:11:19 +08:00
7c89b4d225
FIX: add setting_id for CR-6 printers
...
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I376bb4dea584d8bd7fe65741541a47cb60cc4721
2023-11-01 09:11:19 +08:00
de13d6bcad
FIX: Change the default z_hop from 0.4mm to 0.2mm
...
for X series and P seris with nozzle 0.4mm.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Iaa15c4ffaeed455f99261151020f13d498c615f4
(cherry picked from commit 3dafafe3a66863b7af743b4fffd41d68b9c24737)
2023-11-01 09:11:19 +08:00
8355bc949f
ENH: [STUDIO-3892] different app config dirs for internal/beta
...
Change-Id: Ibd771b948f9a0b8e95b87c8d7244ab5728b6f4a8
2023-11-01 09:11:19 +08:00
94f26da614
ENH: [STUDIO-3980] drag object accross plate in ObjectList
...
Change-Id: Iee3193a8e0eaea67670a55e023fe64adca7a8695
2023-11-01 09:11:19 +08:00
5076a3008a
NEW: insert Gcode between objects
...
Change-Id: Iec3535941390bfbd279a5677c352d92f36506d4c
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
(cherry picked from commit e0c5476e2e4c02055fb6ce7b4b4d927498c6ee90)
2023-11-01 09:11:19 +08:00
163ff38c3b
ENH: [STUDIO-3895] enable mac window menu
...
Change-Id: Icd53c6866e9108f960aa52e54e518efc5def7101
2023-11-01 09:11:19 +08:00
3c01e937f8
ENH: [STUDIO-4028] RequestUserAttention on printer error
...
Change-Id: I37f451edcd57059320103093291c6037129a2898
2023-11-01 09:11:19 +08:00
11fb86a054
FIX: [STUDIO-3891] not remove unselected config bundles
...
Change-Id: Ibab65c289b3d0900650b93bf6e9789c271dd3db2
2023-11-01 09:11:19 +08:00
e78812dac4
ENH:Supplement to printing status supplement
...
Change-Id: I116e84705b390b99f8646b64eb7e96ae4c35c7d3
2023-11-01 09:11:19 +08:00
faeb95d59d
ENH: smooth 6 times by 1 click of "smooth" button
...
In adaptive layer height, smoothing 1 time is not usable.
There'll be layer lines at the layer height change boundaries.
Change-Id: I84a8b69744db4936062d631864836f0a8cd99cf6
(cherry picked from commit ca77408f38c9a57bee4ab8ee4989024f7f105317)
2023-11-01 09:11:19 +08:00
4e15942ba8
FIX: differnt_support_interface_filament was wrong
...
This bug will cause a gap between support base and interface in Snug mode.
Jira: STUDIO-4067
Change-Id: Ife4d1fc3652803e9d41bb49fddf126cb05798ae5
2023-11-01 09:11:19 +08:00
7e70e071e9
FIX: loading stl with NaN points crashes
...
Avoid loading NaN points.
Jira: STUDIO-3889
Change-Id: I8c00f24e0ae1ba3b637e5d9bb13de93b1b4e77ba
(cherry picked from commit 0d244c7f65b913922ca4fad59d93fd80725f2e49)
2023-11-01 09:11:19 +08:00
ec91e700d8
ci: update build version to 01.07.04.52
...
Change-Id: Ib7f7771485ef943dabe6dd35957e78df73bd4656
2023-11-01 09:11:19 +08:00
c8651b43f1
FIX: CLI: fix a wipe tower position issue
...
when arrange failed and restore to original
we will compute the position of wipe tower again
we should skip this case
JIRA: STUDIO-4048
Change-Id: I19edc36dfa7ec5a9f6b5ba3a1c1e0767361b3e33
2023-11-01 09:11:19 +08:00
5c59b0721f
ENH: [STUDIO-4062] print status supplement
...
Change-Id: I298d4fcfda51b48c90c62936185efc1a6bf459f0
2023-11-01 09:11:19 +08:00
b94dee2460
ENH: CLI: add a flag to allow minimum size save
...
JIRA: STUDIO-3752
Change-Id: I0277c34d108185d10130630a72811122f8ee9ae2
2023-11-01 09:11:19 +08:00
2e1b7f7bb6
ENH: version: bumped version to 1.7.4.51
...
Change-Id: Ib29ffc515f49a02bc2b49df925aa595226b8cadf
2023-11-01 09:11:19 +08:00
6ae7228f9e
FIX: CLI: fix serveral issues of CLI
...
1. duplicate id issue, MAK-1702
2. shrink issue, STUDIO-4048
Change-Id: Ie952f1ecc5267a60f0ce3220c4a5ea31cf7199ff
2023-11-01 09:11:19 +08:00
d724a3bd66
FIX: use extruder list to decide chamber temp
...
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
2023-11-01 09:11:19 +08:00
977ae079c8
ENH: add support for chamber_temp and exhaust_fan
...
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
2023-11-01 09:11:19 +08:00
4121960292
FIX: allow changing ironing angle.
...
allow changing the relative angle between the top surface and the ironing.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I85e8ff3d05d3a6d9408da011631e7d71a6d85178
2023-11-01 09:11:19 +08:00
4fce50453c
FIX: no soild ironing if top or bottom shell is 0
...
fix the ironing be apply to the preview layer of bridge
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I53cb4e6ff80176953c2927c1d9dc5eecc590764c
2023-11-01 09:11:19 +08:00
6b5ba84075
ENH: [STUDIO-4029] ipcam compatible remake
...
Change-Id: Ic6cda7daa6a4e3b03fe645d8ae60f1e68a2c3864
2023-11-01 09:11:19 +08:00
182cab1f14
NEW: [STUDIO-4029] add printer compatible configs
...
Change-Id: I2ff30c3612730bacc868b5f23b10496a370d6735
2023-11-01 09:11:19 +08:00
5ba829337c
ENH: [STUDIO-4029] apply new device compatible settings
...
Change-Id: Ic807c747d77ccbe99b3b157c2e6d3e3a2945e1ac
2023-11-01 09:11:19 +08:00
13857dba34
FIX: modify the default position of wipe tower
...
Change-Id: I27eacb73a7e32d20416da785378d3ff0c31f5c23
2023-11-01 09:11:19 +08:00
9560a292f2
FIX:check if the printer and preset are the same
...
jira:[STUDIO-4018]
Change-Id: I69ea1e3f8e8214ae68464665e1e7260fcc41dd82
2023-11-01 09:11:19 +08:00
ba3638e70e
NEW: allow changing the angle of ironing in the dep mode.
...
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I09348096fd19ee4e07ce3a04ae152f7ee5758767
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
2023-11-01 09:11:19 +08:00
edcdad162e
FIX: tree support bottom interface layers were not correct
...
The bottom interface layers were not right when "independent support layer height" is enabled.
This commit ensures there are always 2 bottom interface layers and the gap
is not less than specified. However, the gap may be slightly larger.
Jira: STUDIO-3842, STUDIO-2138
Github: #2127
Change-Id: Ifd8fbc4c7bc6dd92f2534fdd0179458a9e93c79a
2023-11-01 09:11:19 +08:00
6cf4f072ce
ENH: text translation about first layer seq
...
Change-Id: I4e9571e9467c95d70c9c2554cb1a90c95d4079c9
2023-11-01 09:11:19 +08:00
xun.zhang
igiannakas
wenjie.guo
tao wang
zhou.xu
qing.zhang
PavelMikus
maosheng.wei
lane.wei
zorro.zhang
zhimin.zeng
chunmao.guo
Kunlong Ma
Arthur
gerrit
liz.li