and fix the nozzlechange's error cleanbox.
and fix some error in interface's nozzlechangle and toolchange.
jira: none
Change-Id: I2fd5c68d90506fcb8f01f09a8246dfb5838baef4
when switch printer, we found some filament preset not visible
and we need to allow it to be selected
jira: STUDIO-9979
Change-Id: I9613747a755f449c2f48563082b6893e426f37ea
1. Try to merge filaments before grouping
2. Set max match num for machine filamnet in match mode
jira:STUDIO-10392
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2451d838e07ee02f493fda4dc702f3d13b2ad37b
1. In slice plate mode,force use plate mode
2. In slice all mode, force use global mode
jira:STUDIO-10390
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3edb559043fdc52339b7f611643b8f5ac116571d
and set the contact surfaces of different material types as solid,
and reduce the nozzlechange speed if it occurs at the contact surface,
and recuce the toolchange speed if it occurs at the contact surface.
jira: none
Change-Id: I884d60f4114544dfa959bd654ecc985f5fb9aac4
Use clipper2 and remove colinear points.
Later on we can try to set lightning infill as the default infill pattern of tree support.
jira: none
Change-Id: Id545b15d778071cec6e56d212ab68db1ab90ad2a
Thanks to Prusa!
jira: none
original commit message:
ceb13b1faa33ac096fe7ffd89aa222abca119e02
SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
1. fill bed crash (jira: STUDIO-10350)
2. reset arranging settings gives wrong sequential printing order (jira: STUDIO-10346)
3. do not show "arranging done" message when there is no model
Change-Id: Ic1c7eac75e3917b9f1d87ab6acc403f78e0c9f7c
1. the nozzle change gcode use double perimeter width
2. fix the error layer height for adaptive layer height
3. limit the nozzle change speed to 50 when a bridge is detected
4. fix the error extrusion flow for filament change gcode when a bridge is detected
jira: STUDIO-10269
Change-Id: I580c618555fe19d000a56e2510a42004722c1b8b
salt.wei
zhimin.zeng
jiangkai.zhao
zhou.xu
qing.zhang
xin.zhang
gerrit
xun.zhang
lane.wei
jiaxi.chen
Arthur
Mack
chunmao.guo
Lukáš Hejl