c06e47069f
FIX: config: fix a typo of skip_objects
...
Change-Id: I986da5d677820dfb73fbab5bff43ee26147e431a
2023-07-07 17:52:43 +08:00
7c76cf99b9
ENH: CLI: add option repetitions for future use
...
Change-Id: I97bdc04b542f9725a047348450c2c677d8807427
(cherry picked from commit d5a20f689cade6cc5b28bbec70931c6d122ef6f4)
2023-07-07 17:52:43 +08:00
7b0b24e64e
ENH: add PLA-AERO,add default key in common json
...
Change-Id: Ia6551f50e0f921a196a3a94659b367ca1ec4424f
2023-07-07 17:52:43 +08:00
c5d70a846e
ENH: add setting of extruder type
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic126466f6b579dd6a55a1ba16a63c015d538c750
2023-07-07 17:52:43 +08:00
1368501508
ENH: add Generic HIPS
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0fd861db6137c39f59630ae443661ddeb7a7b060
2023-07-07 17:29:08 +08:00
766abf92fa
ENH: add back use_relative_e for third party printer
...
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
2023-07-07 17:29:08 +08:00
53ea77b67b
ENH: show filament vendor in develop mode
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ice9c3a86ce22c4c6dde784afb2e7c23e929ac7d2
2023-07-07 17:29:08 +08:00
546322d1cc
ENH: add solid infill pattern
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8878c8d5f0024c9cbde6040f317d0783dfc5eccd
2023-07-07 17:29:08 +08:00
e567afdcb5
ENH: support exclude objects for klipper printer
...
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
2023-07-07 17:29:08 +08:00
ec756bc2df
ENH: add acceleration para
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie82934e2fb5cdb4ec77246e2d5cd6be36fdc7d5a
2023-07-07 17:29:08 +08:00
739d8c9b28
ENH: filter small gap
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9bffe629419455b2a7b4494aa595b711619939da
2023-07-07 17:29:08 +08:00
346321379a
ENH: add decel para
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I95a1240c8d6ce7365055e840e526f279a55939e4
2023-07-07 17:29:08 +08:00
aa62c6e870
ENH: add jerk parameter
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I6aadbffebc069167a460c991aa8fb711b754ff37
2023-07-07 17:29:08 +08:00
112712e966
ENH: add top & bottom infill flow ratio
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If4b2d203d8568a7c640425702b0a77ccea3b596b
2023-07-07 17:29:08 +08:00
026eaf6bc4
ENH: manual setting for PA for 3-rd party printer only
...
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
2023-07-07 17:29:08 +08:00
4f4516357f
ENH: add seam parameters and increase wall loops
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id5c6cd6e97493f8912ce1857aed56eecace66cee
2023-07-07 17:29:08 +08:00
8905121af5
ENH: sync voron profile from orca
...
Thanks OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I02f6b712cc07907ae7cae4284fb75ddef053dfea
2023-07-07 17:29:08 +08:00
efd65561a2
NEW: add Device view for third-party printers
...
cherry-picked from SoftFever
Change-Id: I36b2fa0227886e4fac494c8b83e12f4fc0b04e17
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-07-07 17:29:08 +08:00
c7775ace16
ENH: skip_objects: add the skipped_objects into sliced_info
...
Change-Id: I2a04aa00503a04cfe3e9d680ceabdb4947142d34
(cherry picked from commit ca548d69daa0bc2970efc080fcf1537e6babb278)
2023-07-07 17:29:08 +08:00
6e34ecd749
ENH:update PETG/PTEG-CF fan_threshold
...
Change-Id: Iffdffd936f249dd763ab7ebad0b7622d1eb504af
2023-07-07 17:29:08 +08:00
6968eb5d82
ENH: support export multiple model objects as stl under CLI
...
Change-Id: Ib6cb68624d111971dc763901f3a8414673d9a546
2023-07-07 17:29:08 +08:00
0ce835dcd4
ENH: add option "remove_small_overhang"
...
Let the user choose remove or not.
Github issue: #1810
Jira: STUDIO-2992
Change-Id: I9c5e087d171d16d8d7318b36efe825a6cbc29c33
2023-07-07 17:29:08 +08:00
1a36608d59
FIX: [STUDIO-3037] use plate type labels from configdef
...
Change-Id: Iecf81fe5a8cbe35ffa431432ff938a4b81ddea5c
2023-07-07 17:25:51 +08:00
1f54aaf22b
NEW: add calibration
...
Change-Id: I03e5489a67042e7f76f5a42260a289d540b5a63a
(cherry picked from commit cbac2c639db830eb779b1979c8d6b4eb3decb7e6)
2023-07-07 17:25:51 +08:00
3ea602091e
ENH: add back infill anchor for special case
...
These two settings is necessary for some
specific user case.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
2023-07-07 17:25:51 +08:00
3d1f61c7ed
NEW: add tree_support_brim_width option
...
Jira: STUDIO-2921
Change-Id: Id5fddc0b6f5ffe3beb9afb0be5f81a766fc5b21e
(cherry picked from commit 86d7b6016e48143aad03744a58d44042ff0a0b4c)
2023-07-07 17:25:51 +08:00
7b12dcb6ea
NEW: add concentric infill pattern for ironing
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Icd9f9fe0e39d86725faa98dd3eae82a4189130e0
2023-07-07 17:25:51 +08:00
b5c7532700
NEW: only one wall for first layer
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4ed31db361230b7192c210e506717e16bd28a6f3
2023-07-07 17:25:51 +08:00
415fb2989d
ENH: modify Support W/G display name
...
Change-Id: I8fbdea4411073a74df804cbcc466027b1c3e941f
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-04-17 15:39:02 +08:00
9b6a182e8f
FIX: modify the translation.
...
Change-Id: I94c1dc1a811b063611d43f6bde5e591e381cb4da
2023-04-17 15:39:02 +08:00
60dd35b4bf
ENH: fuzzy skin handling
...
1 limit the range of setting
2 avoid too dense points when fuzzy skin enabled
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6691fd03d2aa960b055b68100dfb338b640cb4af
2023-04-17 15:39:02 +08:00
6f5de187c6
ENH: enable inner brim mode
...
Change-Id: I22f53c75e0731cb1ad397c1233e858a5b9a8fc0f
(cherry picked from commit 66637a616498c8fc38745670a75ba119ae9b1a5f)
2023-04-17 15:39:02 +08:00
4e5ed34fde
ENH: CLI: set the default pipe to null to remove warning
...
Change-Id: I9e2cbb3bba02892a6a97a6a3e0bd9b0f729d202a
(cherry picked from commit 1b94c924919c60231e9a87717d0b51204e37dcbc)
2023-04-17 15:39:02 +08:00
cf6077fe7d
FIX: CLI: fix the no-check not work issue
...
1. no-check not work
2. refine the progress updating logic
Change-Id: I8acf18d8ab8958310fa3375de50cc9692b3408c1
2023-04-17 15:39:02 +08:00
e2f96590cf
ENH: CLI: add normative_check logic
...
Change-Id: I7a02fefb2a161b27a35ad73102d8c57dbffa7c6b
(cherry picked from commit 3de468b341e95336611ff527453160131ec04b65)
2023-04-17 15:39:02 +08:00
e2d6ed99d1
ENH: add post_process back
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I05fc655080f3888255297d689552de84a81ed849
2023-04-17 15:39:02 +08:00
6ddcc14577
ENH: support fuzzy all wall lines
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If6754b6a958203459882a125048e01b347e0a4db
2023-04-17 15:39:02 +08:00
355dd8d463
ENH: Re-open pattern angle option under Support/Advanced
...
Re-open this option as requested by github users.
Fix Jira STUDIO-2083; Github issue-1102
Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
2023-04-17 15:39:02 +08:00
af0fca211b
ENH: add grid & rectilinear_interlaced interface pattern
...
Github: #1018 , #1221
Jira: STUDIO-2534
Change-Id: I8c766b5b934364253c0344e39f474e4ac3b81add
(cherry picked from commit e7d46fe60856ab511905b46799943bfde8a71826)
2023-04-17 15:39:02 +08:00
d43c7d5c92
NEW: add gcode conflict checker
...
1. add gcode conflict checker
2. add a new command line option: --no_check. When it's provided, gcode
conflict check is skipped.
Change-Id: I6feafca8c5fa6c3c5eae1f0e541ce59d2f03dedf
(cherry picked from commit 5a39afb64e826a960d9673dcada89d02d62b3911)
2023-04-17 15:39:02 +08:00
dda90b1810
ENH: get start_gcode filament
...
Change-Id: Ia511f758d5c59ddc38c79f251e8c95511de4a235
2023-04-17 15:39:02 +08:00
c65a5f8bf5
ENH: thumbnail: add top_view thumbnails and picking thumbnails
...
1. add top view thumbnail for each plate
2. add picking thumbnails for each plate
3. save model object id for picking
Change-Id: I1d7f6ade22726ff12c282cb12e4a78e6b444a070
2023-04-17 15:39:02 +08:00
68c9cb0a8c
FIX: some config param range
...
Change-Id: Ia19f51e121bd1966e35efef1127d685b07ca676f
2023-04-17 15:39:02 +08:00
4cb8b1e125
ENH: Re-open support independent layer height
...
Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.
JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)
2023-04-17 15:39:02 +08:00
ee3e8fc515
ENH: restore inner and outerinner brim modes
...
1) the function is not released to public
Change-Id: Ia1b5a31db3b1b1864997b57fe875c01f3ea9fb08
(cherry picked from commit a816cc313659f87978e1275b98f43172cb416a59)
2023-04-17 15:39:02 +08:00
662453f419
ENH: add the time limit and triangle limit for cli slicing
...
Change-Id: I80d6e58dca6648427dbe4cfbc01eabdedfa79f52
2023-04-17 15:39:02 +08:00
e094af7040
ENH: add PETG-CF type
...
Add new filament type before new filament preset.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I404880668a3cec566e0b35e38a6b467936f50bb7
2023-02-28 18:44:28 +08:00
4abaad0244
FIX: typos in the tooltip of brim tpye
...
The tooltip of brim type contain messages of inner brim,
which is not enabled in the current version
Change-Id: I155a16cc4331cb0b5b54d29f6be1de6c82819e0c
(cherry picked from commit 1fe773438e1697b8a0b9817a885b13e7e4fae097)
2023-02-24 09:23:57 +08:00
9dceb42ba3
ENH: validate the config from 3mf and give some hints when there are errors
...
Change-Id: Ic25e5426e4e85a35a6a2413109f47b653955ec78
2023-02-22 20:09:17 +08:00
cbb84d2fb6
ENH: support filament_z_hop_types
...
Support override z top type in filament
This is handling for STUDIO-2082
Change-Id: I885d1d5e44d626e28b260ff569d0359e462a5f8d
2023-02-22 20:09:17 +08:00
lane.wei
xun.zhang
salt.wei
qing.zhang
Stone Li
Arthur
chunmao.guo
liz.li
zhimin.zeng
wintergua
MusangKing
miaoxin