1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
Change large object's inflation to (bedsize-objectsize)/2 when it could actually be placed into bed but couldn't with default inflation.
JIRA: STUDIO-1536
Change-Id: Ibf8ed066ee20a9a7b1c604371a9e030c94711080
(cherry picked from commit 093bad1a1765f05d909984d24a113e125870d55b)
1. send to printer change to send to print sd card
2. update the default error message
3. display networking error messages on the page
Change-Id: Ib82f952486d18ff481ac377aa607b5455b31564b
1. Use nlopt and clipper offset togather seems not stable, very easy to
crash. We do the offset outside nlopt now.
2. Fix a bug with finalAlign where objects may be translated to overlap
with excluded region.
3. change the words of support_expansion
Change-Id: I22e37b20e4ae16f47bde206de90845616e4cefad
(cherry picked from commit 1c26e5d2862fd3f3292971b5c749420bfb2cdf0e)
1. Should start from bottom left if there is excluded regions
2. avoid exclusion regions in fixed_overfit_topright_sliding
Jira: STUDIO-1422
Change-Id: If88ecf86a0485bd478a77df8cfd4942df8ca27ac
(cherry picked from commit a8393de51bd178b731ef4c7201a5fe3247d97a1f)
if the brim of an object exceeds the bed area, it will be clipped before transformed to G-Codes
Change-Id: I68d700a85e1d28a5e337e53d614266f6e5e0a653
(cherry picked from commit d19ffaa7bdf4b0ab750119d9ef6252491d936f3e)
1. improve auto-arrange compactness around wipe tower
2. do not show "Avoid extrusion calibration region" for P1P
3. encourage objects with similar height to be arranged together
Jira: STUDIO-1364
Change-Id: I5efa61a676c453618cdb3915fb98928d07138deb
(cherry picked from commit 571ee0c6d91d8a5f6a60838052f09d49d85f12ed)
Wipe tower is needed if support base and interface use different materials.
Jira: STUDIO-1336
Change-Id: I006ece952aac1a0f0a57721c2cd1b52b2ceee28a
(cherry picked from commit 1a387e4b1607dee36f5abe499892f027e244fbeb)
1. change tray id like to A1, B1, C1, D1
2. can change the name of the project that is sent
3. add ams mapping instructions
Change-Id: If301f4051f640157a53d6927a0ddf2facf4961b4
1. reduce expansion of exclusion regions
2. expand extrusion calib regions to let them touch bed boundary, to
greately simplify auto-arranging with avoidance option on
3. improve dist_for_BOTTOM_LEFT to allow objects be put left to
exclusion regions temporarily
4. improve on_preload for better handling objects around exclusion regions.
5. improve debug tools
6. fix a bug with wipe tower estimation (don't estimate if wipe tower is
explicitly disabled)
7. use larger y-overlap threshold to estimate rod height confliction
better in per-object print ordering (now we use half the clearance
radius)
Change-Id: Iab29d47a072d8515f28a09855432f92fcffa8c5f
(cherry picked from commit 3a4f242a3a6fd2f82dcc8306cde4d1cb107a5099)
1. export all sliced files
2. support to print all sliced files
Change-Id: I59345370fb590b4c3c70b9b71385b25342a22e02
Signed-off-by: Stone Li <stone.li@bambulab.com>
Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
1. send to printer change to send to print sd card
2. update the default error message
3. display networking error messages on the page
Change-Id: I27b67091e9449bb9d469f9ded53148e0b1a74369
1. create user folder if not exists
2. add a tips for binding a printer
3. fix sdcard tips
4. modify icons
5. refine layout of task options
Change-Id: Ic0529cf1e8bdde0128052bc42454f6e6aaae87ca
Signed-off-by: Stone Li <stone.li@bambulab.com>
1. do not consider extrusion calibration region if no micro lidar on the
printer
2. do not inflate extrusion calibration region by brim width, just let
them overlap
Change-Id: I62228d85e8a55d40e22a6ae7f5f065f281936429
(cherry picked from commit 4c456e1f3e675a2ea1358d2983f85a95e58eb49c)
1. when the plate is locked, the sliced result is kept after auto-arrange;
2. when only arrange a plate, other plates' results are not affected
Change-Id: I7566e11e9eec0c2b196a2e78d9dc306ea325e9ff
test www.bing.com
test bambulab host
test http service
test storage upload and upgrade
test storage downloading
Change-Id: Ia2aca1d3fdff5dd4e930df138e8c6a1b5aad2585
Signed-off-by: Stone Li <stone.li@bambulab.com>
tao wang
Stone Li
chunmao.guo
Arthur
miaoxin
wintergua
养乐多
lane.wei