dc1d7b1ef8
ENH: add segment nozzle cleaning for PLA-CF & PETG
...
1. Update P1P,P1S,X1C,X1 change filament gcode. Add segment nozzle cleaning
for PLA-CF and PETG
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6fe0792a53f99b9fabaa053952e9987fa28b3c6d
2023-11-09 10:09:10 +08:00
e7ffce7f53
ENH: update A1 mini gcode
...
1.improve wipe mouth temp 140-150
2.delete the last flush start
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie3db3b89c61b18bdff79fe2dbf61398c428da733
2023-11-09 10:09:10 +08:00
3059b49199
ENH: update X1E start gcode
...
1.Optimize the heating sequence for the X1E chamber
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I22650b71961218b32247a84eefb9bf8dc5dceeb7
2023-11-01 09:33:21 +08:00
f21cac6e66
ENH: update A1 mini start gcode
...
1.shorten prime line and change x axis freq sweep
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3582f7fb17dfa173f33ad74f49d7d2b70036df5f
2023-11-01 09:33:21 +08:00
402d399f55
ENH: add more photo shoot commands in end gcode of A1
...
Add more photo shoot comamnds in the end gcode to prevent sharp ending of timelapse video of A1.
Also fix a bug of using timelapse_type=2 in end gcode.
Jira: None
Change-Id: I2a426be7a2f7d22b10b79c2b7eb1a04538b5340a
2023-11-01 09:33:21 +08:00
fda9abdf52
ENH: update X1E start gcode
...
1. Add clog protect for more low temp filament
jira: STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I82abd6f84b6c106ecf65c78e87a5e3d65ef30294
2023-11-01 09:33:21 +08:00
5c7b2e16bf
ENH: add X1E as upward printers
...
1. P1P,P1S add X1E to upward printers
2. X1 ,X1C add X1E to upward printers
3. A1 mini add X1E to upward printers
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I574854b3303a879b738e6841bacd30959b5005a7
2023-11-01 09:33:21 +08:00
b086d568c6
ENH: add more clear limitation in timelapse gcode
...
This has no any influence on function. Just make
the limitation more clear and easily maintained.
So people can easily see timelapse function is not
supported in i3 printer
JIRA: none
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0c88a5a0ce4b7e42117842c9673e1df022fdf618
2023-11-01 09:33:21 +08:00
91681f3714
ENH: sync profiles from release branch
...
1. sync profiles from release branch till Sep 20
2. contain X1E profiles
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifdfe8678d52c89a56dcb31be7a16ed96082f0c43
2023-11-01 09:33:21 +08:00
e4fad329b8
ENH: change bbl machines hot end model
...
jira: STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5a0dad8fdd77f4063329a37b8f0c61932c66308
2023-11-01 09:33:21 +08:00
464bc7e906
FIX: Different default Z hop upper boundary for different machines.
...
Github: #77
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I8065a2ea57496b5f415e591225877ba773fdb9f6
(cherry picked from commit 6fb7e1084caf9006d504c24ce1f026e475bcb348)
2023-11-01 09:33:21 +08:00
6edaa740bc
FIX: Change z hop height from 0.2mm to 0.4mm
...
Models with overhanging areas are easily knocked down with Z hop height
at 0.2mm
Github: None
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I65fa14fe5f217c2d1384569efa8c2233c14dde83
2023-11-01 09:33:21 +08:00
142499871e
NEW: add best_object_pos for auto-arranging
...
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
2023-11-01 09:11:19 +08:00
a22fd80bf4
ENH: refine the logic of extruder_clearance_radius
...
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
2023-11-01 09:11:19 +08:00
1e83346277
ENH: add printer structure in config
...
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I78969725c8b9984872e57fd2da476b9417cc1df7
(cherry picked from commit c57fc4a9ea501e60f52f4267892816cdf8f4e3c8)
2023-11-01 09:11:19 +08:00
de13d6bcad
FIX: Change the default z_hop from 0.4mm to 0.2mm
...
for X series and P seris with nozzle 0.4mm.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Iaa15c4ffaeed455f99261151020f13d498c615f4
(cherry picked from commit 3dafafe3a66863b7af743b4fffd41d68b9c24737)
2023-11-01 09:11:19 +08:00
d724a3bd66
FIX: use extruder list to decide chamber temp
...
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
2023-11-01 09:11:19 +08:00
3752f608a4
FIX: sync the layer change gcode to P1P
...
Change-Id: I8a57c43dbb1e5979a1714939426995dc7d229966
2023-08-01 22:09:01 +08:00
030aab5068
FIX: Revert "FIX: Smooth timelapse in common profile was wrong"
...
This reverts commit 31c0fc89e3f70b0fa110fa715586c2a597e0929a.
Reason for revert: X1 not working
Change-Id: I9b634e61b37aa3294aa133458d257bc2035b8d48
2023-08-01 22:09:01 +08:00
13d33a2cf2
ENH: modify P1S start gcode
...
Use P1P start gcode for P1S
Change-Id: Ic787c78e1e368551740344893a0d7092a34f5b40
2023-07-31 14:29:15 +08:00
d694409b86
FIX: Smooth timelapse in common profile was wrong
...
Remember C10 is for traditional timelapse, C11 is smooth timelapse.
The mother profile of all machines should be right.
Change-Id: Ia941f743d2a81ef4b5b4fa08a37ca654eb86d0d7
2023-07-31 14:29:15 +08:00
793c657b46
ENH: remove nozzle_hrc in params page and profiles
...
use std::map to map nozzle_type to nozzle_hrc
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie9d1db486808bd5164c7952caecaf4ac279f43d8
2023-07-31 14:29:15 +08:00
d53d03f1fc
ENH: add p1s as compatible machine
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I08b5f069be45fe0d16bd9e148ffb2409285b2503
2023-07-31 14:29:15 +08:00
dfdd335307
fix: missing newlines
2023-07-21 19:51:38 +08:00
108b0b6999
ENH: add P1S machine
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ide4b293e20e0a66dde748ee5844c7bc0dfcc359e
2023-07-13 10:35:05 +08:00
9b74fbe459
ENH: update X1C/X1/P1P start gcode
...
Change-Id: Ic552ac801202589e00ef692bae57126b8eed79c7
2023-07-07 17:52:43 +08:00
f525785338
ENH: update X1/X1C/P1P start gcode
...
Change-Id: I487778ac32435b870ce78fc515187c0d08db9aba
2023-07-07 17:52:43 +08:00
d9b44245ad
ENH: update X1/X1C start gcode
...
Change-Id: Ib6ac426ee91be4b85590df2343bc1cb9933dfe73
2023-07-07 17:52:43 +08:00
87848594b7
ENH: update X1C start gcode
...
Change-Id: Ib1c7e829ae7876c55fdf2d9d3b7f436653dea27a
2023-07-07 17:52:43 +08:00
7b0b24e64e
ENH: add PLA-AERO,add default key in common json
...
Change-Id: Ia6551f50e0f921a196a3a94659b367ca1ec4424f
2023-07-07 17:52:43 +08:00
029e246fe0
ENH: update gcode of N1,X1,P1P
...
Change-Id: I417b77c33ff76eeec3eddf8be246f60785ee5454
2023-07-07 17:52:43 +08:00
9bd0e3e85b
ENH: update start gcode
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ide7f55f348b1b49c56da02079178a4b1242d4897
2023-07-07 17:29:08 +08:00
cdae0ac2b5
ENH: set fid of Genric PLA Silk & travel_length
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4f8b7e73007c9740fac8c379c2b85f2d6fbdd9d8
2023-07-07 17:25:51 +08:00
1d0476fa44
ENH: optimize the efficiency of auto lift
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9c1679cc80ae23ff066df6e2fe98b5530a9d2288
2023-07-07 17:25:51 +08:00
4297f72283
ENH: update end G-code
...
Change-Id: I4d153b76df8752ca97f394ebb4dd96c4550e95af
(cherry picked from commit 217e7b332c89160d322a86c25ae35b106dcb7d60)
2023-07-07 17:25:51 +08:00
c86c3bf897
FIX: set temp befor open HB fan to avoid oozing
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ibbda89a855927615d7da0e6da94a988852a10465
2023-07-07 17:25:51 +08:00
d776c7595e
ENH: enable gcode window and support viewing added custom gcode
...
Change-Id: I2def8c32c17b6f2edfd2e6d0776123127560f167
2023-04-17 15:39:02 +08:00
9309831d26
ENH: update machine_start_gcode
...
turn on HB fan before setting the nozzle temp
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I55908465055dcd93d274c1d861715cf7b9cbe655
2023-04-17 15:39:02 +08:00
34f52b213c
FIX: modify the camera command of P1P smooth timelapse
...
P1P use its own layer_change_gcode
Change-Id: I3f640a8d6fdc4481460e0f5aca33cd1ebf3de5ab
2023-04-17 15:39:02 +08:00
dda90b1810
ENH: get start_gcode filament
...
Change-Id: Ia511f758d5c59ddc38c79f251e8c95511de4a235
2023-04-17 15:39:02 +08:00
538c607842
ENH: z_hop_types is enum not string
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia05eff8c78c65e358c8df36ea8b606a9b8da2663
2023-02-28 18:44:28 +08:00
3e2fea33a9
ENH: update upward compatible machines
...
P1P, X1 and X1C may compatible with each other
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I1de7350cbc613e0dc539fe2e7f26dbe9d455e4f3
2023-02-28 18:44:28 +08:00
354a3736e4
ENH: use spiral lift as default lift type
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I52477adc3e6d48ab8201364c74006c5432db5d67
2023-02-24 17:44:15 +08:00
2616479489
FIX: fix possible toolhead shake by adding 300ms delay
...
1. It seems there are a lot of buffered frames in IP CAM. Have to
wait enough time untill all buffers are flushed.
2. From watermellon's suggestion, increase travel speed duing layer
change, to save time and reduce oozing.
JIRA: STUDIO-2167
Change-Id: Ia2ec0bde216e90207897c00c395f7e02ea2fe342
(cherry picked from commit 9c85a7c68617b1628e1698912da20f1ebc69ec16)
2023-02-24 09:23:57 +08:00
14ca73ec3c
ENH: miss generic PLA silk for P1P
...
As title
Handle for github issue #1303
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iffda4f3ea615a4e876f83ef8f85dacf954d5678e
2023-02-24 09:23:57 +08:00
a981d3ac2c
ENH: reduce possible toolhead shake in smooth timelapse
...
It's not necessary to pause before photo-shooting, but after it.
Pausng by 50ms should be enough.
Jira: STUDIO-2167
Change-Id: I88ba5db1d6cce390ae5e26ac03533b0ee277b5bd
(cherry picked from commit ae34c0b9e875d1e52798a5359b0cce2151942fb8)
2023-02-22 20:09:17 +08:00
c909fd9178
ENH: start gcode midify
...
move to the middle upper edge of plate and ratract after calibrating to avoid leakage
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idb09aaafee3bfccfd7c14d1140778498195b98c3
2023-02-22 20:09:17 +08:00
bcd3ec146c
ENH: mult height process for diff nozzle
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I26dec4431dba40dd35cc4038c674c6108e607304
2023-02-22 20:09:17 +08:00
209c50f50d
ENH: fix for collision when print by object of multi color
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3d8b285dedb13ecbb5df38d46293680d9a0c1a61
2023-02-22 20:09:17 +08:00
cbb84d2fb6
ENH: support filament_z_hop_types
...
Support override z top type in filament
This is handling for STUDIO-2082
Change-Id: I885d1d5e44d626e28b260ff569d0359e462a5f8d
2023-02-22 20:09:17 +08:00
xun.zhang
Arthur
salt.wei
wenjie.guo
chunmao.guo
lane.wei
qing.zhang
adripo
liz.li
zhimin.zeng
yifan.wu