Z height after timelaps gcode is changed. Should get
the new z height and save into gcode writer.
Jira: none, bug is found by self-test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I25516def507782600f0f270a339c88ea01a472a3
in brim generation, object's first layer extruders are obtained from regions.
If the extruders are changed at certain layers in by layer slicing mode,
the extruders from layer regions are not right.
this patch fix that issue by updating the extruder overridding in
a new member "object_first_layer_wall_extruders" in "print_object" class during
constructing "Tool_ordering" class. then using the new member directly when generating brim.
besides, support contour, which should be no_brim_area, is obtained from "support_infills" instead of "lslices" of "support_layers"
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4332
Change-Id: I271d0ea0d8c01c412d4fb9ade5296c6a6471aed6
(cherry picked from commit 9919ce9d1b9105b859273eee4fe9481c4dff6189)
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
by the multimaterial painting.
This commit is cherry pick from Prusa, the commit number is
9bce0fcf9bb479c289c396e7e23ce95841a61628
Thanks to Prusa.
Jira: XXXX
Change-Id: I29ad1fa9ab3ccc393a1e2affde1ae869d0a33afa
in previous codes, we generate brim for an object with raft, which do not need brim.
jira-ID: https://jira.bambooolab.com/browse/STUDIO-4238
Change-Id: I4b2c2c1c744c098cdcfdb03c2100b06a458e983a
(cherry picked from commit 0d06415d42c95e40f79a228f75827588171d410c)
Models with overhanging areas are easily knocked down with Z hop height
at 0.2mm
Github: None
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I65fa14fe5f217c2d1384569efa8c2233c14dde83
Calibrated motor noise option, N1 supported.
And when none of the calibration options are selected, the start calibration button turns gray
Change-Id: I991034a13001f840016475171c33218ddc812d35
This causes the printer setting page unable to display becase I added a
coPoint type option best_object_pos.
Add reading and writing coPoint type configs solves the problem.
Jira: STUDIO-4303
Change-Id: I34e40e567236d28ab1a7be265128275191fcc935
support modifying whether to turn on prompt sound from the print option pop-up window
Change-Id: I3206bfcefc9292dd2a7acb7294addc901ad21d4d
(cherry picked from commit ecc13666689d7f644ed3db36088b32b239728779)
Fix percent in support interface speed in 3rd printers
jira:STUDIO-4292
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id030922546c7246f205d0e2b9294f607ce550696
finalAlign was not correct because the excluded regions are counted twice.
Jira: STUDIO-4259
Change-Id: Ie4ad167af8487ce7250b83d85f144ef01e60e00f
(cherry picked from commit 154de0d94ff34231a60966fb89cc14655cce8008)
Add cmd line option to pass layer change gcode.
This is useful for lithophane auto change colors.
Cmd: --custom-gcode custom_gcode_toolchange.json
Examples of the input json file can be found in the jira.
Jira: STUDIO-4070
Change-Id: I5beb5ff7d6d81028e95013e79f955e498cd3ba30
zhimin.zeng
salt.wei
hu.wang
Kunlong Ma
Arthur
wintergua
xun.zhang
Stone Li
chunmao.guo
tao wang
Lukáš Hejl
wenjie.guo
zhou.xu
slynn1324
lane.wei