e4288407b9
NEW: support multi device
...
JIRA: STUDIO-6072
Change-Id: Ic514c4097767b0a728368c9ea48ee103c031fbb0
Signed-off-by: Stone Li <stone.li@bambulab.com>
2024-04-23 20:07:49 +08:00
95106f3523
FIX: wrong chain sequence caused by narrow bridge
...
1.Add filtration for bridge area
github:#3873
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I03f7c1ef5bfb86aafdc15065008f0eedfb1a0036
2024-04-23 20:07:49 +08:00
11b7796faf
FIX: the status is not correct when change nozzle
...
jira: none
Change-Id: I8bb99c260234f07b8ef5bdc389e15a455770130b
2024-04-23 20:07:49 +08:00
cf146f4fed
FIX: can't use support filament in gcode.3mf
...
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
2024-04-23 20:07:49 +08:00
37d49a4bf5
FIX: CLI: fix the crash issue caused by get_min_flush_volumes
...
JIRA: no jira
Change-Id: I0d5bfd605e51ebddac8fddc4d83dab5055b0fbf2
2024-04-23 20:07:49 +08:00
ffd292a62c
FIX: Error "Voronoi cell doesn't contain a sourcepoint"
...
github: 3859
Change-Id: Idca84992bcba5380bfe05e63ac9a5e40419dcfdf
2024-04-23 20:07:49 +08:00
8bdda5afb9
FIX: the error display when reset virtual slot
...
jira: none
Change-Id: I5ae5899baf1bfc2aaadb832083b277855a669fd5
2024-04-23 20:07:49 +08:00
427deda14e
FIX: Top surface bridging fail on 3DHC & FL infill
...
Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill
jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)
2024-04-23 20:07:49 +08:00
c5d9b3a3a7
ENH: add nozzle blob detection and air printing detection
...
jira: new
Change-Id: Ie4a19a7ad7d0b10a021c516cbc3a84b4ae734302
2024-04-23 20:07:49 +08:00
cd9305e3e0
FIX: blockers not working for sharp tails of tree support
...
also change default style to tree organic
jira: STUDIO-6801
Change-Id: Iab1d8c6117139c9a7a4c1fa71de0a13bcb356dd5
(cherry picked from commit d2c4efad58f16b23bef49bd47d3b70bf322d6f55)
2024-04-23 20:07:49 +08:00
1389862ad8
NEW: FlipLines infill
...
jira:6701
New infill pattern that combine block lines infill and switching layers for smooth transition.
Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)
2024-04-23 20:07:49 +08:00
1957f3ed1e
FIX: fix can't enter ',' in multiplicator
...
github: #3805
Change-Id: I6dd70822d1c2e79d66c70514d6dd580ab029c7ea
2024-04-23 20:07:49 +08:00
01fb301f6c
FIX: fix some cali problem of P series
...
jira: none
Change-Id: Id57ea8d65da22ab653cca49509cb923ff065e43f
2024-04-23 20:07:49 +08:00
558eb037d9
FIX: active_inst is -1 cause crashed by "return" button
...
jira: none
Change-Id: I3ce1725b671c3dc5e7321385010b219b3af99e6f
2024-04-23 20:07:49 +08:00
a14a8d9c8f
FIX: auto-arranging incorrect with rotation enabled
...
auto-arranging incorrect with rotation enabled and the objects already have been rotated.
jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)
2024-04-23 20:07:49 +08:00
0e1eafecbe
FIX: redo prepare_infill when change infill dir
...
As title
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I1f59ea5ab44835ea14e690d836e76b5c1ef7340e
2024-04-23 20:07:49 +08:00
ea838d3cc1
FIX: auto-orient unstable due to numerical accuracy
...
jira: STUDIO-6464
Change-Id: I644bba2eea8cba6c73d2997c9399718b12eab9f2
(cherry picked from commit cccf57c75c3c348f918ededfbabb1eede5ac2ebd)
2024-04-10 20:03:44 +08:00
d14f37b00f
NEW:Update data only on device pages
...
jira:[STUDIO-6776]
Change-Id: I33b0c9f35c1dc6df2db3b6bd4f446f46b31ecf6c
2024-04-10 20:03:44 +08:00
7ee6e62ec4
FIX: unable to map if filament not used in model
...
1.Fix filament can not map if it's not used in model body
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibd2685ffd198b2e17dbf44289d0144b5b7c25788
2024-04-10 20:03:44 +08:00
b40cf28a83
FIX: seam and unretarct pos error on smooth vase
...
Jira: none
casused by invalid path of smooth vase mode
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib597e8c05760886aae2c42e42e8d46e82b844578
2024-04-10 20:03:44 +08:00
1804290caa
FIX:force_native_colol should be false in gizmo text
...
Jira: STUDIO-6778
Change-Id: Ib3b75ed3160f3ec41d3130cd37d14d77afc30f64
2024-04-10 20:03:44 +08:00
1938842ee2
ENH: When creating a custom Filament, use the system Filament type.
...
Jira: 6301
Change-Id: I1bfddcf43d2ebaebca4eb494d1f64165c3d59e9e
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
2024-04-10 20:03:44 +08:00
c62d9b6674
FIX: fix not popping up a prompt when the temperature is set to 0
...
Jira: 6497
Change-Id: I6498fc6962e7da376d4c652dab0a99a161932eef
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
2024-04-10 20:03:44 +08:00
449cb0b27c
ENH: Full re-write of spiral vase
...
Github: 2744
* Practically full re-write of spiral vase
- Adds transition out to prevent sharp edge at the top of spiral vase.
- Adds XY interpolation
- Adds option to turn XY interpolation on/off
* - Increasing E to 5 decimal digits (I observed uneven flow with less than that)
- Excluding all travel moves (I saw a bug where somehow we ended up with travel moves within the print so excluding all travel moves)
* - max_xy_smoothing is now configurable, default is 200% of nozzle_diameter
- fixed no-op travel moves in the middle of spiral that now show up as defects when Smooth Spiral is enabled!
* - Avoiding namespace pollution
- Fixing dist_XY == 0 bug
---------
Co-authored-by: Andrew Boktor <aboktor@microsoft.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Change-Id: I4e982b6192f730037ff497389454313af3905e82
2024-04-10 20:03:44 +08:00
88db3a9124
FIX: has E0 on extrude cmd
...
Jira: 5789
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I866eb0f09053094cd2bd54902a06d8cac709a605
2024-04-10 20:03:44 +08:00
78327146cc
FIX:clear clip position when exit paint gizmo
...
Jira: STUDIO-6748
Change-Id: I2995bb17fdfc26453d8235b4c01a78449b2a085e
2024-04-10 20:03:44 +08:00
5c6b8812a5
ENH: display filament labels in "change filament" context menus
2024-04-09 08:19:56 +08:00
30ee6b0d31
ENH: remove long retraction warning
...
jira:NEW
Signed-off-by: tao wang <tao.wang@bambulab.com>
Change-Id: If60236b3282991a2d94df7d125427cff86899536
2024-04-08 21:16:06 +08:00
385e7ffe3e
FIX: crash when change infill pattern
...
1. Fix crash when change infill pattern. Now change infill pattern will
influence prepare infill
2. Remove with loop param, no longer use now
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibee8808e462bd418d83b7e5781dd2bc5cc772eb1
2024-04-08 19:50:03 +08:00
839db8ec94
ENH: sync the missed codes before
...
Change-Id: Idc79a0fe401f1c7fbf8825a28556286089b46d54
2024-04-08 19:50:03 +08:00
e447ef5256
ENH: add tooltip for uncommon profiles
...
1. Add profile description for uncommon profiles
2. Add some translations
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib1d40d0ffe55adde74e66d9e696861463429e49d
2024-04-08 19:50:03 +08:00
b364495e7e
FIX: fix hms display in tr language
...
JIRA: STUDIO-6743
1. fix display tr luanguage in home page
Change-Id: I672d46b1349078ab8e3fc59e124d2f583f09e8e9
Signed-off-by: Stone Li <stone.li@bambulab.com>
2024-04-08 19:50:03 +08:00
609a133336
ENH: disable internal_bridge_support_thickness
...
1.In the new algorithm,we no longer use this param
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie7660c0f9744cb1f33bce4fa1ccbfef06b3df712
2024-04-08 19:50:03 +08:00
7116c5a7c5
ENH: add default params for long retraction
...
1. Only auto calculate flush when enabled
2. Add default params for long retraction
3. Disable filament override for unsupport machines
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5d51505b58101839527e944f9a237483951f9fe
2024-04-08 19:50:03 +08:00
081ac40f38
ENH: readd ensure vertical thickness option
...
1.The new algorithm still generate unnessary infill some time.
So we readd the option
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I65fdd58e19db85582d89facb5038adf8e87f299a
2024-04-08 19:50:03 +08:00
712b724d2a
ENH: Add rotation support for 3D Honeycomb, improve stability
...
jira: 6701
Change-Id: I0552f7a7f59d1476f081044411557c96036a2c70
(cherry picked from commit 646fa84d42b926fe9e127a60da9c395baf39fac1)
2024-04-08 19:50:03 +08:00
43f766a462
FIX: P1P/S can not modify the k value in old version
...
jira: 6745
Change-Id: I5c9dffe8e998213e6af6e1d01a6b0ae82521e8db
2024-04-08 19:50:03 +08:00
300b3b77c1
FIX: do not need reset bed_type for pa calibration
...
jira: none
Change-Id: I411064cf14d94a9bd1f0f6668ee23aa10d372f3d
2024-04-08 19:50:03 +08:00
d02f9561a8
FIX:not need deal SINKING logic in assembly view
...
jira: STUDIO-6730
Change-Id: Idca375293377ec219f79873d29e963b50cafa8df
2024-04-08 19:50:03 +08:00
c211a9c53a
FIX:rotate model volume use world coordinate system by default
...
jira:STUDIO-6730
most of code is from PrusaSlicer,thanks for PrusaSlicer and enricoturri1966
commit 7f6f5dab83db71d165959f48a27c952c258812fb
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Tue Oct 12 11:07:31 2021 +0200
Tech ENABLE_WORLD_COORDINATE - Gizmo rotate oriented in dependence of the selected coordinate system
Change-Id: Ia3691a848ef2c4dd4dde5d84289f482f8874956f
2024-04-08 19:50:03 +08:00
60bc535e59
FIX: scarf angle only check seam point angle
...
Jira: 6681
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I2d7a3e76c2a307bef8d6816814e7fef4bb6909ff
2024-04-08 19:50:03 +08:00
b0ed0c44ae
ENH: add wiki links
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I72409d6c6617772ab98826513533d3f5b5f02380
2024-04-08 19:50:03 +08:00
3564daaef1
FIX: invalid support weight per extruder
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0e4b857c9c758ab7c54ef13aee1bf596f975640b
2024-04-08 19:50:03 +08:00
7ec14b3f63
ENH: add support for gcodeviewer statistics
...
jira: new
Change-Id: Ied6d61e8c48ac82daf16579d9caed9723cf8e29d
2024-04-08 19:50:03 +08:00
74702b2c6c
ENH: seperate support weight from model
...
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I86bb34941269bf1aa29436a94ebbdff675497e85
2024-04-08 19:50:03 +08:00
469a431869
FIX:need update first.feature when at same model object
...
due to ensure on bed
Jira:STUDIO-6712
Change-Id: Ie3090444f430347ef8097f2026f41ef92c43bdff
2024-04-08 19:50:03 +08:00
eb50f3ee58
FIX: auto arranging gets wrong object height
...
obj->bounding_box().size() is not the real object size if the object has been rotated.
jira: STUDIO-5999
Change-Id: I6553d4c990696efd674e3e57063802127d5d5282
(cherry picked from commit 479ea9fb02f55d24f27c94633f3d852bd5c62c83)
2024-04-08 19:50:03 +08:00
5a63200c02
FIX:height range cut = volume_count * 2
...
Jira: none
Change-Id: I539c2f9cda7985b4b3c318ca8aa1eb7c52fdce82
2024-04-08 19:50:03 +08:00
c11d3c5110
FIX: Homepage bug when network disconnect
...
JIRA: none
Change-Id: I93bb0028332fb167bacabf9b5dc285c73e1870d8
2024-04-08 19:50:03 +08:00
4cb8bac4e2
FIX:allow some case to modify distance
...
Code fallback:reload scene
in 3D view GLVolume::explosion_ratio = 1.0
hide "Edit to scale" icon
Jira:STUDIO-6727
Change-Id: Ib7079077f5b39930891869af618b93861f3aa178
2024-04-08 19:50:03 +08:00
9eade7a3ad
FIX:use error feature and so on
...
Jira: STUDIO-6717 STUDIO-6712 STUDIO-6717
Change-Id: I1c44c5ba44f591a89e6862015ca3ae4d6ed9218d
2024-04-08 19:50:03 +08:00
d6d7d90d2e
NEW: support turish language
...
JIRA: STUDIO-6688
Change-Id: I451119a8c9e24d5f52a1046c05f4d20b18852582
Signed-off-by: Stone Li <stone.li@bambulab.com>
2024-04-08 19:50:03 +08:00
0f986b4ffe
ENH: 3D Honeycomb
...
Cherry-picks new 3D Honeycomb from Orca Slicer by David Eccles (gringer).
jira: 6697
Orignal commit message:
3D Honeycomb - switch direction at smallest bridge point, rather than every layer (#4425 )
Co-authored-by: SoftFever <softfeverever@gmail.com>
Change-Id: Ida2e5b76a7b906be21045e053200519af1bd9489
(cherry picked from commit a9f521c37e04a0cf404184848aa738b8a6043f87)
2024-04-08 19:50:03 +08:00
abb2356e6e
ENH: refine long retraction ui
...
1. associate button display logic
2. Add valid range tip
3. seperate the printer into three types
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie14c8746eb20456dacd5c129a5449c1e7c7db372
2024-04-08 19:50:03 +08:00
510bc20696
ENH: support saving PA calibration results for P series
...
Jira: none
Change-Id: I9402b8bcce7b48a63d0e97e0708080701d065e7a
2024-04-08 19:50:03 +08:00
f65ab131d1
ENH: Greatly improve UI/UX of the home page
...
JIRA: none
Change-Id: Ibaac520b789ceb8c0dbd05ab0452209bc0ca9be9
2024-04-08 19:50:03 +08:00
41c71a6aac
ENH: limit slope start height range
...
Jira: 6654
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9dd45022e1350ace220901e70822d27773817221
2024-04-08 19:50:03 +08:00
39839e3732
FIX: overhang interface may overlap with object
...
jira: STUDIO-6710
Change-Id: Ie13ec81e07326a2572d698607c03aeb793f119c8
(cherry picked from commit cc49c82793a877c2c4187e6254e4092de9285010)
2024-04-08 19:50:03 +08:00
480489b29b
FIX: infill speed not work on region level
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie3d17c5e3cbf91a8854e3b4cd80babeb2b1bd121
2024-04-08 19:50:03 +08:00
551ba96205
ENH: modify the multi-material segmentation and voronoi
...
This patch is cherry pick from Prusa, thanks to Prusa
Rework multi-material segmentation to work directly on the Voronoi diagram without creating a copy of it.
Previous algorithms assume that they can get an invalid Voronoi diagram. Because of that, during the multi-material segmentation, a copy of the Voronoi diagram was created, and there were several attempts to fix missing vertices and edges. But as it shows, this wasn't a good enough approach and sometimes led to several issues like bleeding layers.
After generalization, our approach for detection and repairs of invalid Voronoi diagrams from Arachne, we could assume that multi-material segmentation gets non-invalid Voronoi diagrams.
With this assumption, we reimplement multi-materials segmentation to work directly on the Voronoi diagram. That should make multi-material segmentation more stable.
So, this should fix several issues like bleeding layers. Also, memory consumption should decrease by a lot. Also, there should be some speedup of multi-materials segmentation.
Jira: none
Change-Id: I72aa6e1f9634d9ee8759aa469a0b39a36ace62f5
2024-04-08 19:50:03 +08:00
309010fff2
ENH: add precise_z_height
...
jira: none
Change-Id: Idb9fcf0063e773f1531a49961478460b91ded10f
2024-04-08 19:50:03 +08:00
708342effd
FIX: enable resumed read only Field
...
Change-Id: Id09e671932458699c020f0a061d8cfc11a6958ab
Jira: STUDIO-6641
2024-04-08 19:50:03 +08:00
5b834000f6
ENH: refine retraction before cut
...
1. Add filament retraction before cut control
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifcb087c9791c0461b793ef811b21ebd4c007d880
2024-04-08 19:50:03 +08:00
3d75210ad1
ENH: port of new infill algorithm from prusa
...
1. initial port of new ensure vertical thickness algorithm from prusa
2. initial port of new internal bridge algorithm from prusa
3. readd interface shell
Based on prusa commit 11c0e567a68979e96085b3763a76464cb793ea12
and commit f8e7d1b01c114b4d45f9e221c6b5bb935065d650
Thanks prusa.
original author:
PavelMikus <pavel.mikus.mail@seznam.cz>
Vojtech Bubnik <bubnikv@gmail.com>
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d36be065a29cf87315918d720f726975a43ef9f
2024-04-08 19:50:03 +08:00
734a70b493
FIX: tree supports may generate flying nodes
...
Previous parallelization has a bug where two adjacent nodes may be deleted at the same time.
jira: none
Change-Id: I99a29dae9f72aa74ed2721eea4421b15eec10732
(cherry picked from commit 91efe67d723652d3f7e4484dd3cdf31638f769a4)
2024-04-08 19:50:03 +08:00
a90f0eda97
FIX: Remove user ID and other information
...
Jira: XXXX
Change-Id: Ia63ec88a335d88fd40a29952abe6d40d8991efee
2024-04-08 19:50:03 +08:00
2c1b0d6510
FIX: PrinterFileSystem: retry connect on user action
...
Change-Id: I3e8902298385ed2e5906fd15d1817b6e33522a76
Jira: STUDIO-6354
2024-04-08 19:50:03 +08:00
b9061b6fb6
ENH: hide tuck did
...
Change-Id: I9021d3f51c9a73bc9208b479f96b1ddbe7a2f8f8
Jira: none
2024-04-08 19:50:03 +08:00
507345deb1
ENH: improve supporting sharp tails of tree support
...
1. sharp tails are supported by a sparse set of contact points which are
easier to remove than previously dense surrounding support.
Organic tree support also has this feature, including all other smart
overhang detection techniques (small overhang and cantilever detection),
with the cost of slightly longer time to detect overhangs.
2. improve supporting overhang contours by adding contact points along
contours.
jira: STUDIO-3876
2. remove some redundant data structure.
Change-Id: If7f595348506a14aba2d0132d23f97d3539c1e1f
(cherry picked from commit e3cce09b9db12ced2841045ffd337b1f35494e6c)
2024-04-08 19:50:03 +08:00
92d125c41f
FIX: Slicer creates invalid color pattern
...
github: 3749
Change-Id: I3fd74a9ca59b75873fcbca4437e4858c749ee853
2024-04-08 19:50:03 +08:00
2e426c8f96
FIX: Can't edit text
...
github: 3750
Change-Id: I1caecaa968e60cadcdbe9f7aa67cba141bb88230
2024-04-08 19:50:03 +08:00
11d711bc4b
FIX: add query_real_volume_idx_from_other_view api
...
Jira: STUDIO-6545
Change-Id: Ib8216981c5d2945a0221a5caa1fbc14ed74e930b
2024-04-08 19:50:03 +08:00
fa53be3736
NEW:add measure gizmo in assemble view
...
Jira: STUDIO-6545
Change-Id: I83b85f26305754c99088abb81fe568619151d32f
2024-04-08 19:50:03 +08:00
9c10410f19
FIX:GLWipeTowerVolume's render should inherit parent class
...
Jira: STUDIO-6545
Change-Id: Iee9a7e7cc93785e736e56760640c8315af472c6a
2024-04-08 19:50:03 +08:00
8c95aca226
NEW:add "face and face assembly" function
...
Jira: STUDIO-6545
Change-Id: I1091b8a4f27a54b26761cd369462813fb0055572
2024-04-08 19:50:03 +08:00
023bd51532
ENH: add some new filaments
...
1.Add Bambu ABS-GF,Bambu ASA-Aero,Bambu Support for PLA/PETG
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I347c953b7bf2b0be79ca3f4b6eeaf7fa9cc31b62
2024-04-08 19:50:03 +08:00
8b04ecb7b1
FIX: layer Times in preview showed wrong color
...
Jira: STUDIO-6612
code is from PrusaSlicer,thanks for PrusaSlicer and enricoturri1966
commit 3ce2d3a700ef215b37faef273f54be5619b9d642
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Wed Apr 13 15:27:46 2022 +0200
#8176 - Tech ENABLE_USED_FILAMENT_POST_PROCESS - Fixes used filament data exported to gcode file not taking in account custom gcode
Change-Id: Iafceb6c88f2a8b7ce1f2a34d2b392bf7a390d52f
2024-04-08 19:50:03 +08:00
818c7a345a
ENH: Rotate around the center of the bounding box
...
jira:none
code is from PrusaSlicer,thanks for enricoturri1966 and PrusaSlicer
commit dcec7a8ad40eaad72789f6dba15cafc94664119f
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Tue Feb 28 08:08:56 2023 +0100
Fixed Rotate Gizmo orientation for mirrored objects + ensure that instances and volumes always rotate as rigid body
Change-Id: I359d15814a6411bbd6bcb753661388bb5e6fb513
2024-04-08 19:50:03 +08:00
82775a1a59
ENH: Optimize Some Feature
...
1, Show/Hide OnlineModels When Quick Switch in Perference
2, Fix New Tag show of Left Menu
JIRA: none
Change-Id: Ie52c5b4a178d049259f9762c05dfb3decc5b5ca9
2024-04-08 19:50:03 +08:00
d9e47bd9a9
NEW:add move and rotate gizmo in assemble view
...
Jira: STUDIO-6545
Change-Id: I30ab8155f5288953b36cd9a301ce3596d6edc0c6
2024-04-08 19:50:03 +08:00
a3197cb18b
slic3r: Fix missing boost declaration
...
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/ColorSpaceConvert.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/webp -I/usr/include/libpng16 -I/usr/include/pixman-1 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/fribidi -I/usr/include/gio-unix-2.0 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/ColorSpaceConvert.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/ColorSpaceConvert.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/ColorSpaceConvert.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/ColorSpaceConvert.cpp
/run/build/BambuStudio/src/slic3r/Utils/ColorSpaceConvert.cpp: In function ‘wxColour string_to_wxColor(const std::string&)’:
/run/build/BambuStudio/src/slic3r/Utils/ColorSpaceConvert.cpp:246:5: error: ‘boost’ has not been declared
246 | boost::split(result, str, boost::is_any_of(","));
| ^~~~~
2024-04-01 08:54:23 +08:00
7acfb3e69f
slic3r: Fix missing std::mutex declaration
...
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/Http.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/webp -I/usr/include/libpng16 -I/usr/include/pixman-1 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/fribidi -I/usr/include/gio-unix-2.0 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/Http.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/Http.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/Http.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/Http.cpp
/run/build/BambuStudio/src/slic3r/Utils/Http.cpp:87:6: error: ‘mutex’ in namespace ‘std’ does not name a type
87 | std::mutex g_mutex;
| ^~~~~
/run/build/BambuStudio/src/slic3r/Utils/Http.cpp:19:1: note: ‘std::mutex’ is defined in header ‘<mutex>’; did you forget to ‘#include <mutex>’?
18 | #include <openssl/x509.h>
+++ |+#include <mutex>
19 | #endif
2024-04-01 08:54:23 +08:00
6e72c604ea
slic3r: Fix std::regex declaration
...
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/CalibrationWizardPresetPage.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/webp -I/usr/include/libpng16 -I/usr/include/pixman-1 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/fribidi -I/usr/include/gio-unix-2.0 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/CalibrationWizardPresetPage.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/CalibrationWizardPresetPage.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/CalibrationWizardPresetPage.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/CalibrationWizardPresetPage.cpp
/run/build/BambuStudio/src/slic3r/GUI/CalibrationWizardPresetPage.cpp: In lambda function:
/run/build/BambuStudio/src/slic3r/GUI/CalibrationWizardPresetPage.cpp:321:18: error: ‘regex’ is not a member of ‘std’; did you mean ‘boost::regex’?
321 | std::regex decimalRegex(expression);
| ^~~~~
2024-04-01 08:54:23 +08:00
a89e54ab4f
slic3r: Fix missing wxDisplay declaration
...
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/WebGuideDialog.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/webp -I/usr/include/libpng16 -I/usr/include/pixman-1 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/fribidi -I/usr/include/gio-unix-2.0 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/WebGuideDialog.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/WebGuideDialog.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/WebGuideDialog.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/WebGuideDialog.cpp
/run/build/BambuStudio/src/slic3r/GUI/WebGuideDialog.cpp: In member function ‘bool Slic3r::GUI::GuideFrame::run()’:
/run/build/BambuStudio/src/slic3r/GUI/WebGuideDialog.cpp:919:36: error: ‘wxDisplay’ has not been declared
919 | int main_frame_display_index = wxDisplay::GetFromWindow(wxGetApp().mainframe);
| ^~~~~~~~~
2024-04-01 08:54:23 +08:00
c680128141
libslic3r: Fix missing BOOST_LOG_TRIVIAL declaration
...
FAILED: src/libslic3r/CMakeFiles/libslic3r.dir/Support/TreeSupport.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DHAVE_FREETYPE -DHAVE_OPENGL_EXT -DHAVE_XLIB -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOCC_CONVERT_SIGNALS -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/libslic3r -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Support/TreeSupport.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Support/TreeSupport.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Support/TreeSupport.cpp.o -c /run/build/BambuStudio/src/libslic3r/Support/TreeSupport.cpp
/run/build/BambuStudio/src/libslic3r/Support/TreeSupport.cpp:832:39: error: ‘info’ was not declared in this scope; did you mean ‘tbb::v1::info’?
832 | BOOST_LOG_TRIVIAL(info) << "detect_overhangs takes more than 30 secs, skip cantilever and sharp tails detection: layer_nr=" << layer_nr << " duration=" << duration;
| ^~~~
| tbb::v1::info
In file included from /run/build/BambuStudio/deps/build/destdir/usr/local/include/oneapi/tbb/task_arena.h:31,
from /run/build/BambuStudio/deps/build/destdir/usr/local/include/oneapi/tbb/partitioner.h:48,
from /run/build/BambuStudio/deps/build/destdir/usr/local/include/oneapi/tbb/parallel_for.h:27,
from /run/build/BambuStudio/deps/build/destdir/usr/local/include/tbb/parallel_for.h:17,
from /run/build/BambuStudio/src/libslic3r/Support/TreeSupport.cpp:25:
/run/build/BambuStudio/deps/build/destdir/usr/local/include/oneapi/tbb/info.h:125:11: note: ‘tbb::v1::info’ declared here
125 | namespace info {
| ^~~~
/run/build/BambuStudio/src/libslic3r/Support/TreeSupport.cpp:832:21: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
832 | BOOST_LOG_TRIVIAL(info) << "detect_overhangs takes more than 30 secs, skip cantilever and sharp tails detection: layer_nr=" << layer_nr << " duration=" << duration;
| ^~~~~~~~~~~~~~~~~
/run/build/BambuStudio/src/libslic3r/Support/TreeSupport.cpp:884:43: error: ‘debug’ was not declared in this scope
884 | BOOST_LOG_TRIVIAL(debug) << "found a cantilever cluster. layer_nr=" << layer_nr << dist_max;
| ^~~~~
2024-04-01 08:54:23 +08:00
7eeca13b51
slic3r: Fix missing wxColourData declaration
...
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Auxiliary.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/webp -I/usr/include/libpng16 -I/usr/include/pixman-1 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/fribidi -I/usr/include/gio-unix-2.0 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Auxiliary.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Auxiliary.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Auxiliary.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/Auxiliary.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/ConfigManipulation.hpp:12,
from /run/build/BambuStudio/src/slic3r/GUI/Tab.hpp:35,
from /run/build/BambuStudio/src/slic3r/GUI/Auxiliary.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/Field.hpp:433:5: error: ‘wxColourData’ does not name a type; did you mean ‘wxColourBase’?
433 | wxColourData* m_clrData{nullptr};
| ^~~~~~~~~~~~
| wxColourBase
2024-04-01 08:54:23 +08:00
b1f20e6ece
slic3r: Fix missing wxWidgets declarations
...
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Gizmos/GLGizmoAdvancedCut.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/webp -I/usr/include/libpng16 -I/usr/include/pixman-1 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/fribidi -I/usr/include/gio-unix-2.0 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Gizmos/GLGizmoAdvancedCut.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Gizmos/GLGizmoAdvancedCut.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Gizmos/GLGizmoAdvancedCut.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp
/run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmoBase.hpp:203:33: error: ‘wxMouseEvent’ does not name a type
203 | virtual bool on_mouse(const wxMouseEvent &mouse_event) { return false; }
| ^~~~~~~~~~~~
In file included from /run/build/BambuStudio/src/slic3r/GUI/GLCanvas3D.hpp:12,
from /run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp:3:
/run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmosManager.hpp:148:5: error: ‘wxTimer’ does not name a type
148 | wxTimer m_timer_set_color;
| ^~~~~~~
/run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmosManager.hpp:149:29: error: ‘wxTimerEvent’ has not been declared
149 | void on_set_color_timer(wxTimerEvent& evt);
| ^~~~~~~~~~~~
2024-04-01 08:54:23 +08:00
61aaaa8432
slic3r: Fix missing chrono declaration
...
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Gizmos/GLGizmoAdvancedCut.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/webp -I/usr/include/libpng16 -I/usr/include/pixman-1 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/fribidi -I/usr/include/gio-unix-2.0 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Gizmos/GLGizmoAdvancedCut.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Gizmos/GLGizmoAdvancedCut.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/Gizmos/GLGizmoAdvancedCut.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.hpp:4,
from /run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp:2:
/run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmoBase.hpp:148:10: error: ‘chrono’ in namespace ‘std’ does not name a type
148 | std::chrono::system_clock::time_point start;
| ^~~~~~
2024-04-01 08:54:23 +08:00
400ba6252b
slic3r: Fix wxTimer declaration
...
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/GLCanvas3D.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/webp -I/usr/include/libpng16 -I/usr/include/pixman-1 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/fribidi -I/usr/include/gio-unix-2.0 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/GLCanvas3D.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/GLCanvas3D.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/GLCanvas3D.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/GLCanvas3D.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/GLCanvas3D.hpp:12,
from /run/build/BambuStudio/src/slic3r/GUI/GLCanvas3D.cpp:2:
/run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmosManager.hpp:148:5: error: ‘wxTimer’ does not name a type
148 | wxTimer m_timer_set_color;
| ^~~~~~~
/run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmosManager.hpp:149:29: error: ‘wxTimerEvent’ has not been declared
149 | void on_set_color_timer(wxTimerEvent& evt);
| ^~~~~~~~~~~~
2024-04-01 08:54:23 +08:00
55addc7af6
libslic3r: Fix missing assert() definition
...
FAILED: src/libslic3r/CMakeFiles/libslic3r.dir/ParameterUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DHAVE_FREETYPE -DHAVE_OPENGL_EXT -DHAVE_XLIB -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOCC_CONVERT_SIGNALS -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/libslic3r -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ParameterUtils.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ParameterUtils.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ParameterUtils.cpp.o -c /run/build/BambuStudio/src/libslic3r/ParameterUtils.cpp
/run/build/BambuStudio/src/libslic3r/ParameterUtils.cpp: In function ‘std::vector<std::pair<std::pair<int, int>, std::vector<int> > > Slic3r::get_other_layers_print_sequence(int, const std::vector<int>&)’:
/run/build/BambuStudio/src/libslic3r/ParameterUtils.cpp:11:5: error: ‘assert’ was not declared in this scope
11 | assert(sequence.size() % sequence_nums == 0);
| ^~~~~~
/run/build/BambuStudio/src/libslic3r/ParameterUtils.cpp:2:1: note: ‘assert’ is defined in header ‘<cassert>’; did you forget to ‘#include <cassert>’?
1 | #include "ParameterUtils.hpp"
+++ |+#include <cassert>
2 |
2024-04-01 08:54:23 +08:00
284ec4d29a
libslic3r: Fix missing DBL_MAX constant
...
/run/ccache/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DHAVE_FREETYPE -DHAVE_OPENGL_EXT -DHAVE_XLIB -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOCC_CONVERT_SIGNALS -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/libslic3r -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/GCode/CoolingBuffer.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/GCode/CoolingBuffer.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/GCode/CoolingBuffer.cpp.o -c /run/build/BambuStudio/src/libslic3r/GCode/CoolingBuffer.cpp
In file included from /run/build/BambuStudio/src/libslic3r/GCode/CoolingBuffer.cpp:1:
/run/build/BambuStudio/src/libslic3r/GCode/../GCode.hpp:413:99: error: ‘DBL_MAX’ was not declared in this scope
413 | std::string travel_to(const Point &point, ExtrusionRole role, std::string comment, double z = DBL_MAX);
| ^~~~~~~
/run/build/BambuStudio/src/libslic3r/GCode/../GCode.hpp:22:1: note: ‘DBL_MAX’ is defined in header ‘<cfloat>’; did you forget to ‘#include <cfloat>’?
21 | #include "libslic3r/ObjectID.hpp"
+++ |+#include <cfloat>
22 |
2024-04-01 08:54:23 +08:00
1f9b56f9f1
FIX: fix the spell error which cause linux bootup fail
...
JIRA: no-jira
Change-Id: Iedb805dc6728310208e8830cc34509c92bfbbb39
2024-03-25 21:38:58 +08:00
59f8b6e669
FIX: Disable OnError PopDialog When Html Load Fail
...
JIRA: none
Change-Id: I7c3f6fa8bcaa592aa00f4ca1dc5a42e1ef1e8124
2024-03-25 20:30:57 +08:00
0410ac0381
ci: update network module based on commit 868f5d7
...
Change-Id: I5584e4441e1f2ab400addaa87ee8013927fb9e15
2024-03-25 20:30:57 +08:00
a2ba70fe62
ENH: Important issue update
...
1, Reset Whole PageInfo when Country Change
2, Disable Makerlab list when Country is China
3, Disable Ctrl+ HotKey in WebPage
JIRA: none
Change-Id: I8622dc6d5b340ee26910b059fef49e3062ca65ff
2024-03-25 20:30:57 +08:00
8c4773d7fc
FIX: filling bed fails if the bed is already full
...
JIRA: STUDIO-6490
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I71b5a01a95cdffef7c0750e6347fa8911dcd781d
2024-03-25 20:30:57 +08:00
ea82c35a03
NEW: Disable MWList Before UserGuide Finish
...
JIRA: none
Change-Id: Id2e71053bddeb02e75b93b6588ff548fe1b5635d
2024-03-25 15:29:19 +08:00
7641be0569
FIX: implicitly set spiral vase config for objects just loading
...
jira: 6514
Change-Id: I04bb2b1abeb62d4dfff4e526b723b1cf1bd5fd7f
2024-03-25 15:29:19 +08:00
58c1dd9c98
ENH: add wiki url for Plate Settings Tab
...
jira: new
Change-Id: If1489eafeb10e7096c3ae49832c68921d3cfad6f
2024-03-25 15:29:19 +08:00
9f4b77da41
FIX: calibration page button broken display issue
...
jira: STUDIO-3913
Change-Id: I2fd488e829d898b7d81d09db814ed6518f0c54a8
2024-03-25 15:29:19 +08:00
3040816e3a
FIX: Left WebView Not Display
...
JIRA: none
Change-Id: Id9578ca0155a7db70e2543c5848e808b7bc93354
2024-03-25 15:29:19 +08:00
46f9334795
ENH: add some translations
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia7bb54f8c792bebd012d2caa5224abc0b922d433
2024-03-25 15:29:19 +08:00
b412cba589
FIX:mesh is not unique After copied
...
Jira: STUDIO-6643
Change-Id: I3189bd2200fdc98e3565a91c0a34837eae749528
2024-03-25 15:29:19 +08:00
a5a944aae4
ENH: change the parameter link to Chinese in Chinese environment
...
Jira: XXXX
Change-Id: I97941dc8d0fe1c2544c3000d9e571d5ce2f88862
2024-03-25 15:29:19 +08:00
61f8004acd
NEW:revert hms error code
...
Change-Id: Ib5cc8bb8b8ced0f70d5bbe4751a1f97258218c6f
2024-03-25 15:29:19 +08:00
b0330dff36
FIX: do not check spiral vase mode config if an object is loaded
...
jira: STUDIO-6514
Change-Id: Ib44ec8322ff178b5765f7fe94b588aa38339691d
2024-03-25 15:29:19 +08:00
f26df7e6ae
FIX: no need to set spiral vase again if it's already eanbled
...
jira: 6516
Change-Id: I58e44001ebad9581c1a133c20a1beaa7d880b151
2024-03-25 15:29:19 +08:00
6c12b711fa
FIX:fix crash when there is no desgin data
...
jira:[STUDIO-6630]
Change-Id: I3dfc66164e8f20d564b9f639f72d6ae221722977
2024-03-25 15:29:19 +08:00
5e03cb3024
FIX: wrong role cache in wipe tower
...
1. Add wipe tower role cache in GCodeProcessor result
2. Add wiki link for prime tower
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia766c7218df68fb1ffba567af193d6bfecacf588
2024-03-25 15:29:19 +08:00
0cd8e00df3
NEW:reducing purge through retracting filament
...
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
2024-03-25 15:29:19 +08:00
74f60c47ef
FIX:fix the v tray's filament unload logic
...
jira:[STUDIO-6627]
Change-Id: I34420bc4d1d27b6b36defb9852bba2eaf77fdcf2
2024-03-25 15:29:19 +08:00
af8e195532
FIX: crash while use conditional scarf
...
and clip paths correctly while has 50% overhang on slope
Jira: 6640 6639
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8abe43177c3965130514017eaaa75bc79ab7b2db
2024-03-25 15:29:19 +08:00
179191eefe
FIX: used filament character occlusion in multilingual
...
JIRA: SUTDIO-6587
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I68940a4237b0e952cee85c2c01886b52c144cfbc
2024-03-25 15:29:19 +08:00
d7ab35000a
FIX:fix bug of hit_different_volumes
...
and color xyz lable in same volume
Jira:none
Change-Id: If926efaa6d2280b1ea7789cc91bf9e3a8de839b7
2024-03-25 15:29:19 +08:00
085ad18a81
FIX: custom layer sequence from End to End comboBox display issue
...
jira: new
Change-Id: I413cd5896d7e921f2c7c03b91b08788fefb9a4f3
2024-03-25 15:29:19 +08:00
fa757b96d9
FIX:confirm all break when repairing manifold edge
...
Jira: STUDIO-6308
Change-Id: I804ccc230b02193d890e36d3690e38e6300aef16
2024-03-25 15:29:19 +08:00
61c7b41cca
FIX: auto-calculate flushing volumes
...
JIRA: STUDIO-6547
FIX the first modification of consumable color after synchronizing filaments, without automatically calculating the flushing volumes
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I2bc76a29afde5241d100cc42a5161db0f9b901c4
2024-03-25 15:29:19 +08:00
02d228d447
NEW: Some Feature
...
1, Add Language in UserAgent of Webview
2, open online model with recommand or browse Param
3, optimize some UI
JIRA: none
Change-Id: I96a4864ab48e51f5213e43971d276737df12e94d
2024-03-25 15:29:19 +08:00
eb9c334c27
FIX: [6510] set nozzle temp incorrectly when popup AMS Setting
...
Change-Id: I898f0b94794a3d67017b1917ce196c4019f5eb4a
2024-03-25 15:29:19 +08:00
f9cbb9abb4
ENH: [6510] enh save user preset logic
...
Jira: 6510
Change-Id: Ide0328253bb4cfd4c761bb2569c246515dee65c2
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
2024-03-25 15:29:19 +08:00
c6f5300f5e
FIX: extra seams on path
...
Jira: 6625
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If930425d4190a1071608af52e6a5fadec3e89fc0
2024-03-25 15:29:19 +08:00
83fda76852
FIX: gizmotext thickness value clamp to a range
...
jira: new
Change-Id: Ie64c1d95fdf067980d194d1ba12affbf1a76d6e0
2024-03-25 15:29:19 +08:00
26b72e36c3
FIX:array bound in m_font_names array
...
and confirm selected model_object at corresponding plate
Jira: STUDIO-6548
Change-Id: I3c2927305fc9007918deb83e5a38734427eaf30f
2024-03-25 15:29:19 +08:00
5aae2f9252
FIX:hide unnecessary display in measure gizmo
...
Jira: STUDIO-6606
Change-Id: I0a5f1ce358c11aaf6d5d8213de4f41f872df487b
2024-03-25 15:29:19 +08:00
3adc997193
FIX: change some set of scarf seam
...
only check slope overhang on conditional mode
add not apply speed slow down for gloss of print result
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I22f7ea7785aeed5833f28103d51f36be84fc7c56
2024-03-25 15:29:19 +08:00
3658c97a94
FIX: sequential_print_clearance_valid not working
...
not working correctly with short objects
jira: STUDIO-6489
Change-Id: I33e1a165f448e1c3e272d4045934c63ad345db2f
(cherry picked from commit 9348eaa22a056db5384a38ea966cec9ba4a533a7)
2024-03-25 15:29:19 +08:00
ad89f63fce
ENH: Merge Scarf seam method from orca
...
Jira:none
BBL:Merged scarf seam and
add imorovemnt to improve seam on defalue setting
--as default setting wipe before rectract get good seam on end
--clip slope at start and end
--clip more on inner wall slope start than outer wall
--slowdown slope speed to get better sea
--todo-slope path had error double dE
reduce it could improve seam,but slope could not stick well.
--check slope path overhang and avoid it while on conditional scarf mode
Co-authored-by: qing.zhang <qing.zhang@BambuLab.com>
Change-Id: I583a1c25e534b2aa5c9d710dcf207aefbea64347
2024-03-25 15:29:19 +08:00
42f095fa49
ENH: Download 3MF and Save in Chinese
...
JIRA: none
Change-Id: I0f6d1c74d609fbabc87ae086059aa8e49a596d02
2024-03-25 15:29:19 +08:00
1ae9bd9d4a
FIX: Image Scale Mode and Online Display
...
JIRA: none
Change-Id: I528f16e93b82748d86dc93e2dd3d85f317babaa7
2024-03-25 15:29:19 +08:00
ee39d775f0
NEW:translate
...
Change-Id: I8ff2d6d753145fc2223bf81067004c5772b1cf04
2024-03-25 15:29:19 +08:00
e3ca6d3bfd
FIX:mac ams setting display
...
JIRA: STUDIO-6228\6409
Change-Id: I432a3aa96601a8e223b5949bc0ad5234c1374dca
2024-03-25 15:29:19 +08:00
7f63a62a87
NEW:material adaptation in select machine dialog
...
JIRA:xxxx
Change-Id: I625eac75c88cad804dd3741f750c5ea68a975421
2024-03-25 15:29:19 +08:00
541bc3a22c
FIX:Prioritize selecting filament with smaller serial numbers in AMS
...
JIRA: 5909
Change-Id: If3030d4dd8d59af36bc1ae1801be1b89b0027a71
2024-03-25 15:29:19 +08:00
23ad6ad0ca
NEW: Open makerlab with login status
...
JIRA: none
Change-Id: Ib8f58812085582b52cfca29471912f2b30cd1b08
2024-03-25 15:29:19 +08:00
0004639982
FIX: [ #3236 ] Unsaved changes to interface copy adjustment
...
github: #3236
Change-Id: Ic618f8089d036a689de4b74711601232d9278844
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
2024-03-25 15:29:19 +08:00
24a15d36ea
FIX: Network Plugin And Makerlab Click
...
JIRA: none
Change-Id: I3f2b1f2d79fc3b7d6a6a6ffcf437b06666e9422d
2024-03-25 15:29:19 +08:00
947b776dab
FIX:fixed loading img resource failure
...
jira:[for fix img load]
Change-Id: Ifb26b2ca23029abeda000322bf2ef7d2b3cda3b4
2024-03-25 15:29:19 +08:00
b274401214
ci: update network module based on commit ef3b059
...
Change-Id: I4a5c733344bd8f477a9cf02ea02a62282e655de7
2024-03-25 15:29:19 +08:00
6a7d3e44b3
NEW: switch to object panel if double click on object
...
jira: none
switch to object panel if double click on object,
otherwise switch to global panel if double click on background.
Change-Id: I6e54d7957aa19f1ebb1f993bc38125bbee8a1c98
(cherry picked from commit cc2e07bc9489c76a7d767acff0406c83c996504c)
2024-03-25 15:29:19 +08:00
81b284fb38
NEW: New UI of Homepage
...
JIRA: NONE
Change-Id: I2a25d087f7708b06b8fa8a48f190856963bc4644
2024-03-25 15:29:19 +08:00
9de69035a0
ENH: speedup tree support generation
...
1. speedup detect_overhangs by skipping sharp tail and cantilever detection if there are too many overhangs.
jira: STUDIO-3584, STUDIO-2592
2. drop_nodes with precalculation of avoidance and tbb parallel_for_each for all nodes in each layer.
jira: STUDIO-1814, STUDIO-2381, STUDIO-2639, STUDIO-5020,
3. don't show too many progress messages
Change-Id: Ia4897089c69c235fb7cd8e5fdcf4690086048b31
(cherry picked from commit 9c08e28b5b5342dfdde2c939fc953f143a42a59b)
2024-03-25 15:29:19 +08:00
bb04bacf63
ENH: CLI: add version check logic
...
add option allow_newer_file
Change-Id: I8e8e4a45f77ebdd6dae6189841e4a9952e95ca82
2024-03-25 15:29:19 +08:00
e1cca42a42
ENH:add tooltip for search item
...
JIRA: STUDIO-6459
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I7602a32159d21de8f37ea0208dd6a9f59b90dcce
2024-03-25 15:29:19 +08:00
5841dc041c
FIX: Supports automatic calibration of textured PEI
...
jira: 6504
Change-Id: I3234fb555b9bf0ea97e73387651874733e761ee7
2024-03-25 15:29:19 +08:00
a3365e14f0
FIX:fix the load status of vtray
...
jira:[STUDIO-6435]
Change-Id: I8cafcc0b6caf19492aae6c153fb509f470dc7e83
2024-03-25 15:29:19 +08:00
ef118017cd
ENH:support jumping from project to makerworld
...
jira:[STUDIO-6462]
Change-Id: I35c5612e4aa9f387b30f6fad12419aee2e244217
2024-03-25 15:29:19 +08:00
1934c96bbb
ENH:PEI bed is no longer unchecked by default
...
jira:[STUDIO-6508]
Change-Id: Ic9ca99860d46c27ca4c36a735df3f57fe71417df
2024-03-25 15:29:19 +08:00
dc8fa8be9b
ENH:filter amazon and aliyun domain names
...
jira:[for host check]
Change-Id: I4e77d28d0fa4f3329da7ac57c7440a5a96742e16
2024-03-25 15:29:19 +08:00
7c74711d60
ENH:rename some img files
...
jira:[STUDIO-6512]
Change-Id: I69872533cccda37b94384bc219cc35c5dec9310b
2024-03-25 15:29:19 +08:00
5929a0a431
FIX: fix change nozzle temp in Studio but printer not change
...
Jira: 6510
Change-Id: Ia0e1ac586ff41ddbabdac0845415e70774299387
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
2024-03-25 15:29:19 +08:00
Stone Li
xun.zhang
zhimin.zeng
lane.wei
jianjia.ma
liz.li
Arthur
Kunlong Ma
zhou.xu
tao wang
qing.zhang
maosheng.wei
andrewboktor
Alex Boyd
enricoturri1966
zorro.zhang
David Eccles (gringer)
Lukas Matena
chunmao.guo
Bastien Nocera
gerrit
Leon Fisher-Skipper
Noisyfox
hu.wang