Bridge detection is not accurate. Let's be conservative.
jira: STUDIO-7116
Change-Id: I92ed02e655a1a824169ad261336c65cfb4b53248
(cherry picked from commit 77fd0c5214b2ddab956d1779908872633364779f)
Jira: none
add speed transition between discontinuity speed
detect bridge-wall and only use bride speed on bridge wall
fix the bug that not use overhang speed while support z
distance is 0 on arachne mode
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I72a1504544fe1ed7bd184ca073bd1b52cd2dcd75
Set brim gap to 0 makes brim too hard to remove
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie37736d3a96735759b432b4b61dcc4a82c422515
If the layer height is lower than 0.2, support_top_z_distance and support_bottom_z_distance should also be lower.
jira: none
Change-Id: I3d2904bbfd81330df74c389a3978b721c03caab5
(cherry picked from commit 83c61556de3b2d00a7735b386171f83495874cc2)
1. Set brim_object_gap to 0 so brim will be attached to the model
2. Set extruder_clearance_height_to_rod to 34mm for X&P series to avoid
collisions
github:#3371
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia554519f2c0cc7bdb5b768ea996a7eed4e2e61d6
1. Set elefant foot compensation in A1 to 0.075
2. Add some missing params
Github:#2621
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I064d5e0b23297fd6491af8b97bad0790b077120d
1.Set elefant_foot_compenstation to 0.15 for X and P series
2.Set elefant_foot_compenstation to 0 for A1 series
github:#2621
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I199ca9e37ea1b3f7087fbef4166b0d90acfaedc3
Now normal support also uses this option, so we can't default it to 1, otherwise normal supports will be too hard to remove.
jira: none
Change-Id: Ic5700af5c17e3a7b265c8915f28b0db35c6e06e6
(cherry picked from commit 6b84a9826da108b76569e686bd9def0b23ae29fd)
Can not see obvious eleplant foot after printing
JIRA: None. found by self test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5993b3a2dbb6f4f6a6b8a1714654f1213e4b90f2
1. Add small layer height process profiles for X1 series
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifb826ccf889016de320b5eb23cbe2eae341db28f
JIRA: [STUDIO-2226]
0.4mm nozzle contains different layer heights but has
the same preset threshold angle (30 degree) which is not reasonable.
Hereby, five of them are adjusted based on the overlap ratio.
Change-Id: I96300bf202c3a5fc4428186875a9212c32524ff2
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
1 Use 25% infill density. 60% is too high and useless
2 update filament change gcode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9a1fbbfb56b61723aa6e9d6bc44a22f467d92562
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
As title. And also not make printing time increased
too much.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I79f578227c5d81e76d8dd9254c43a3cb90109132
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Arthur
xun.zhang
qing.zhang
salt.wei
MusangKing
MusangKing