If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. flush_multiplier will be apply the the flush volume during slicing
rather than only in auto-calc
2. mark too small flush volume as red instead of a warning dialog
3. do not forbidden flush volume lower than the nozzle volume
4. fix incorrect focus status of text input box in WipeTowerDialog
5. check the minimum flush volume based on flush_multiplier
6. limit the decimal digit to two places
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Icdcc50c88ecd9463fb9ce73f996d57c2d9f0187f
(cherry picked from commit 60e01edc511f117b05a8a9b92aaf6fd55325e485)
1. don't sort automatically
2. enable the dragging on the object list to adjust the arrange order
3. adjust the object list order after auto-arrange
4. turn off label by default
5. add the snapshot key for label
6. check the the validation of the order
Change-Id: I91461c475cda5335b01a9a608143aa1df31741ab
1. reduce expansion of exclusion regions
2. expand extrusion calib regions to let them touch bed boundary, to
greately simplify auto-arranging with avoidance option on
3. improve dist_for_BOTTOM_LEFT to allow objects be put left to
exclusion regions temporarily
4. improve on_preload for better handling objects around exclusion regions.
5. improve debug tools
6. fix a bug with wipe tower estimation (don't estimate if wipe tower is
explicitly disabled)
7. use larger y-overlap threshold to estimate rod height confliction
better in per-object print ordering (now we use half the clearance
radius)
Change-Id: Iab29d47a072d8515f28a09855432f92fcffa8c5f
(cherry picked from commit 3a4f242a3a6fd2f82dcc8306cde4d1cb107a5099)
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Some sentenses are only slightly different which is
unnecessary. Making them the same can save a
translation and also keep consistency.
Change-Id: Ie59c0bf788a31ee0c6a0d792af7b3d532fe34f75
(cherry picked from commit eb69195569518e3be61e5a8887ea317fbe3e7302)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
This may cause tall objects be printed before short ones. There are two
possible solutions:
1. do strict ordering only when y-overlap is large enough (the one
chosen in this commit)
2. when considering vertical collision with rod, the actual expansion
can be much smaller (because the rod is only slightly off extruder).
But this solution requires an extra parameter. Let's hold it for a
while.
Change-Id: Icc9a4796d49dad93cbcc20d4103e641a48886e5e
(cherry picked from commit 6a958b1fa9e58e4ca3be63b4918da77bcdc53314)
(cherry picked from commit ceff67789c27ea576afd663a2e5bae9a10241728)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
add tips when both print by object and smooth mode are selected
Change-Id: I13f4cc14f2ff7c33c23dcd1708fdb784aef5afa3
(cherry picked from commit a0bfe48df21d4eecf105d41387838f14b22fff3c)
Fix the issue that the first 2 layers of prime tower are not generated
when timelapse is set to smooth mode. This issue only happens in single
filament printing.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
1. memory explosion when enable timelapse.
2. Models with only one color become multicolor after slicing.
Change-Id: Iab3ace70c08d03ab612158d52ff67eef8d5bc718
Filament type of Bambu PA-CF in RFID is PA-CF.
Change it to PA-CF as well in preset to avoid
failure of AMS mapping.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic6b6269123d59863fea2b7d262a124468c95b8af
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
lane.wei
Stone Li
yifan.wu
Arthur
zhimin.zeng
qing.zhang
salt.wei