bb5c614b71
NEW:update the new ui layout of ams mapping window
...
Change-Id: I3a5efbba2400481b5edfcf9e22aab142bf30a4f8
2023-02-22 20:09:17 +08:00
0aa2916d4b
ENH: update ams gcode when loading filament
...
Change-Id: Ia837249e79702693f61cd4e170342ef1e1d8427c
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-22 20:09:17 +08:00
688084c475
NEW: add print sequence setting to plate
...
Change-Id: Ic4acb68743442a49dee04702e7a8073b6641bc39
2023-02-22 20:09:17 +08:00
c909fd9178
ENH: start gcode midify
...
move to the middle upper edge of plate and ratract after calibrating to avoid leakage
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idb09aaafee3bfccfd7c14d1140778498195b98c3
2023-02-22 20:09:17 +08:00
bcd3ec146c
ENH: mult height process for diff nozzle
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I26dec4431dba40dd35cc4038c674c6108e607304
2023-02-22 20:09:17 +08:00
209c50f50d
ENH: fix for collision when print by object of multi color
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3d8b285dedb13ecbb5df38d46293680d9a0c1a61
2023-02-22 20:09:17 +08:00
97acb54695
ENH: remove Christmas cabin from homepage
...
the codes have been removed from web before
Change-Id: I39c2b63c1a4ffa276b7d406eca9fc1f910fb31a9
2023-02-22 20:09:17 +08:00
a934fac180
ENH: remove Christmas cabin menu
...
Change-Id: Idb01d9f24eacdaec8e2451f6021a8428bae1858f
2023-02-22 20:09:17 +08:00
ceb923bc2b
ENH: adjust overhang threshold angles
...
JIRA: [STUDIO-2226]
0.4mm nozzle contains different layer heights but has
the same preset threshold angle (30 degree) which is not reasonable.
Hereby, five of them are adjusted based on the overlap ratio.
Change-Id: I96300bf202c3a5fc4428186875a9212c32524ff2
2023-02-22 20:09:17 +08:00
e994cd02e2
ENH:add some translate
...
Change-Id: Ic635f5f85f67662339edd28d87a4a37232d5bc0e
2023-02-22 20:09:17 +08:00
cbb84d2fb6
ENH: support filament_z_hop_types
...
Support override z top type in filament
This is handling for STUDIO-2082
Change-Id: I885d1d5e44d626e28b260ff569d0359e462a5f8d
2023-02-22 20:09:17 +08:00
92022bd809
ENH: translate "No layers" and others
...
Change-Id: I654490a5e4049dbeb61ef7499adfddfe94bcbcf6
2023-02-22 20:09:17 +08:00
6122f5010a
ENH: sync with localazy and fix compile error
...
Change-Id: I7cae72f24c2fde61e0c1e99c89c21801b7d10125
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-22 20:09:17 +08:00
ecd8418640
FIX: Unnecessary heat up when flush volume is 0
...
Change-Id: I5e0143d8b94ba4007a47ba3edb7277ee64bfafdb
2023-02-22 20:09:17 +08:00
fbc4de136f
NEW: support to config ftp_folder for printer [P1P]
...
Change-Id: I6a3b2a67d2950e2c1c5267bb7c65d5594924caec
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 176e505bcf5f48971302d9aff14e74b118eeafbe)
2023-02-22 20:09:17 +08:00
afb8f47111
FIX:Fixed that AMS icon is not clear in dark mode
...
Change-Id: I22136d4d3b3730871131cacd8a9c1deb8965bd73
2023-02-22 20:09:17 +08:00
a726628657
ENH: cut travel before wipe
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I3b5dfc19c601e0cd72a4fd7fe320791f1d10c87b
2023-02-22 20:09:17 +08:00
7c728452a2
NEW:add filaments not supported by detection
...
Change-Id: I1cabf8631e77fbaf42d2b30ee3e715c8f2459bda
2023-02-22 20:09:17 +08:00
78b6e75955
ENH:add a search box for text toolbar
...
Change-Id: If8a43671916e56d6cb52b9fbd21dd8b8f9539083
2023-02-22 20:09:17 +08:00
8e50744d2a
ENH: add ANYCUIC profile which based on SoftFever
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I85fc64a25dbb761377c63574b3d3ec10fda9dfd6
2023-02-22 20:09:17 +08:00
2b35961960
FIX: correct japanese of logout
...
Change-Id: Ie7e9e1dce591ac16cbc65398466269912925e7e6
2023-02-22 20:09:17 +08:00
2568d52825
NEW: Japanese text in userguide
...
Change-Id: I5e7e15e8fa255715fa3a08b39bac9bf8e8bd3c05
2023-02-22 20:09:17 +08:00
c5ddedc308
ENH: update ams load/unload gcode
...
Change-Id: I3b65ef0492c456e75827692d434250bc21dbcf65
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-22 20:09:17 +08:00
ab0ba360e4
ENH: STUDIO-2171 update PC temp & TPU 95A's max vol
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I229c8634971a20dbdff548ad16d80f0129e76079
2023-02-22 20:09:17 +08:00
126ef98690
ENH: modify config for P1P
...
Change-Id: Ib05a2d627ac921ad3e017817e48fbac527b4acf4
2023-02-22 20:09:17 +08:00
c26c9b8602
ENH: update version to 1.5
...
Change-Id: I114766e4f0304a97cb18e2762be18dae68e667db
2023-02-22 20:09:17 +08:00
c475527808
NEW: replace gcode of ams load and unload
...
Change-Id: I89a1f3e6787c4639c2757e31676dbd15b17331ea
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-22 20:09:17 +08:00
7fe0ee091f
FIX: [STUDIO-1908] add printer cert and version compatible
...
Change-Id: I6aef8c1169952a0b541516ab3a0d7de2d3e213b3
(cherry picked from commit b0bbb571c7c54e81cd52262d334eb1463c3550e7)
2023-02-02 12:14:41 +08:00
c225481a5d
FIX: modify filament change travel path(toolchange_count == 2)
...
Change-Id: Ieca0aeb236582015e5e4e53629ef66567f420e7a
(cherry picked from commit 7d5c45ec46dace26c3e5ae35e8d11e7a7d54fcc2)
2023-02-02 12:14:41 +08:00
3d378563b5
ENH: modify start gcode
...
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
2023-02-01 16:24:44 +08:00
aa36d376ec
ENH: translate "is too close to others" and so on
...
Jira: STUDIO-2020
Change-Id: I73a4cd47bafc32ff580b7970a37f808f78cffc3e
2023-02-01 16:24:44 +08:00
2705b5e4e6
ENH: updare end gcode and max_vol of TPU 95A
...
1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
2023-02-01 16:24:44 +08:00
94e6734cc0
ENH:update ui layout for ip address dialog
...
Change-Id: I0095928e8c3951597d14783e1d4ef904946da993
2023-02-01 16:24:44 +08:00
9a8f832498
ENH:Update IP address input process
...
Change-Id: Iaf1c187dac117ba10ac16045049a346f7c2b9478
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-01 16:24:44 +08:00
1015b7bca9
ENH: enhance the travel path of change filament
...
Change-Id: I720b833fc203f7ece63487e00290f4d91423c9f9
(cherry picked from commit 55e5fd8df1576d2b9252b2bd9e3e494db76218bf)
2023-02-01 16:24:44 +08:00
d25f7535a9
ENH: add tips for P1P when printing all is not supported
...
Change-Id: I5caa5dbc2d9cd3c57318a2366c8a8ef494d4df31
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-01 16:24:44 +08:00
8a3b39345e
ENH: adjust ExtrusionCalibration image related
...
Change-Id: Icca866dc5a164dee7da420f2fc04976bcfb42d04
2023-02-01 16:24:44 +08:00
32afff46fc
NEW: support language of japanese
...
update po files for BambuStudio
Change-Id: I6783fe831d05a19eb7fce6f8b24ee7949d1ed86b
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-01 16:24:44 +08:00
21485dec6a
ENH: add some new filament
...
Bambu PLA tough, Bambu PLA Marble, Bambu PLA Sparkle
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib882485d9bdf6a29b8f5c8681e2d7bda8c7e1da0
2023-02-01 16:24:44 +08:00
eed072eccf
NEW: add extrusion calibration
...
1. display factor of extrusion calibration
2. add progress to calibration extrusion
3. support ext spool
Change-Id: Ic124a0097f16e6287c09f5f133eea84eeefb4000
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-01 16:24:44 +08:00
582ec2c109
ENH: for issue that initial layer temp doesn't work
...
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
2023-02-01 16:24:44 +08:00
e962bcfec9
ENH:add ams humidity tips and update new icon
...
Change-Id: I8f504fa911ef7a84ca8929af3c5d7c53d289761e
2023-02-01 16:24:44 +08:00
2800c97165
ENH: add gcode command for void printing detection
...
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
2023-02-01 16:24:44 +08:00
3ee83cd3db
FIX: [STUDIO-1752] remove background of tips_arrow
...
Change-Id: I5634e33ea320fc8e5fe9cc9d2b641e4598ce133d
2023-01-10 19:08:26 +08:00
de6ba75f40
ENH: add layer progress into gcode file
...
As title
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7b083e15e0f9030d7822494c4d6fc9cc72335ec2
2023-01-10 19:08:26 +08:00
54aae68874
FIX: optimize text display
...
Change-Id: I4e44e12786a1af34cca35edb3c32d9f500b933ed
2023-01-10 19:08:26 +08:00
9dd1cabef6
ENH: translate support setting suggestions
...
Change-Id: Iabaf85589cd99d3364edeb4c3f2847156657e05a
2023-01-10 19:08:26 +08:00
3871dfa03e
ENH: update translation
...
Change-Id: Ibe4bbb671b08ae0e94506d629b711963a58907b5
2022-12-26 05:31:54 -05:00
f4519a45e9
FIX: tree hybrid may hang duing lightning infill
...
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
2022-12-26 05:31:54 -05:00
d287b88548
ENH: add metal PLA-CF & PAHT-CF
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I698cca7e9a8f62d16361184f0ab8428dc177eacf
2022-12-26 05:31:54 -05:00
tao wang
Stone Li
tao.jin
qing.zhang
salt.wei
lane.wei
zorro.zhang
MusangKing
liz.li
chunmao.guo
Arthur
zhimin.zeng