1.shorten prime line and change x axis freq sweep
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3582f7fb17dfa173f33ad74f49d7d2b70036df5f
1. Remove some keys with tree support
2. Modify thin_detect wall and adaptive_layer_height
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie342c27d4dcd2a262993e472a203ce92da14dbb2
Add more photo shoot comamnds in the end gcode to prevent sharp ending of timelapse video of A1.
Also fix a bug of using timelapse_type=2 in end gcode.
Jira: None
Change-Id: I2a426be7a2f7d22b10b79c2b7eb1a04538b5340a
This has no any influence on function. Just make
the limitation more clear and easily maintained.
So people can easily see timelapse function is not
supported in i3 printer
JIRA: none
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0c88a5a0ce4b7e42117842c9673e1df022fdf618
1. Add small layer height process profiles for X1 series
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifb826ccf889016de320b5eb23cbe2eae341db28f
this patch is cherry-picked from OrcaSlicer
Thanks Michael Birkler for adding Tronxy profiles
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3aab8d5e9c03f6632bdde292f91232392eaf7cf7
Models with overhanging areas are easily knocked down with Z hop height
at 0.2mm
Github: None
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I65fa14fe5f217c2d1384569efa8c2233c14dde83
Fix percent in support interface speed in 3rd printers
jira:STUDIO-4292
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id030922546c7246f205d0e2b9294f607ce550696
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
for X series and P seris with nozzle 0.4mm.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Iaa15c4ffaeed455f99261151020f13d498c615f4
(cherry picked from commit 3dafafe3a66863b7af743b4fffd41d68b9c24737)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
This modification is based on Orca's commit abc0f1c68279c4adf1
feat: added Anycubic Kobra 2 (#1765)
* feat: added Anycubic Kobra 2
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix: corrected buildplate texture size
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix: corrected max layer height
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix bed model
---------
Change-Id: I5a82ae29385e8e66499503f40357166d60fb6d2a
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
Remember C10 is for traditional timelapse, C11 is smooth timelapse.
The mother profile of all machines should be right.
Change-Id: Ia941f743d2a81ef4b5b4fa08a37ca654eb86d0d7
Thanks bhast2 ,these profiles are based on his original version.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I23dbb7d8b80b8fc37ecd76c44bf1c547413bc434
(cherry picked from commit 4a58cee3ff08fcd5f542a7779f3a1dfad46a4509)
Thanks OrcaSlicer.
Also fix wrong setting id of these profile
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib34a46d1b1ae5681b755a7f5b1ef227b502b5262
Thanks OrcaSlicer. Also fix wrong
setting id in orca profile
Add one py file to check whether has duplicated setting_id
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8461a1ae754253d8265ae5239fe91cc7ec775564
Thanks orca-slicer. Also fix the wrong
setting id from orca.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68363dbc2a261a6ae13ac5569972446e032e77f0
1. It seems there are a lot of buffered frames in IP CAM. Have to
wait enough time untill all buffers are flushed.
2. From watermellon's suggestion, increase travel speed duing layer
change, to save time and reduce oozing.
JIRA: STUDIO-2167
Change-Id: Ia2ec0bde216e90207897c00c395f7e02ea2fe342
(cherry picked from commit 9c85a7c68617b1628e1698912da20f1ebc69ec16)
It's not necessary to pause before photo-shooting, but after it.
Pausng by 50ms should be enough.
Jira: STUDIO-2167
Change-Id: I88ba5db1d6cce390ae5e26ac03533b0ee277b5bd
(cherry picked from commit ae34c0b9e875d1e52798a5359b0cce2151942fb8)
move to the middle upper edge of plate and ratract after calibrating to avoid leakage
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idb09aaafee3bfccfd7c14d1140778498195b98c3
JIRA: [STUDIO-2226]
0.4mm nozzle contains different layer heights but has
the same preset threshold angle (30 degree) which is not reasonable.
Hereby, five of them are adjusted based on the overlap ratio.
Change-Id: I96300bf202c3a5fc4428186875a9212c32524ff2
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
Bambu pa-cf has been modified, generic pa-cf
should be changed as well
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie859b41bd4d138a5fab204d6ad6a79806c3f0a9b
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
1 Use 25% infill density. 60% is too high and useless
2 update filament change gcode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9a1fbbfb56b61723aa6e9d6bc44a22f467d92562
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
Generic PLA silk should use lower filament
volumetroc and retraction
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8ba11094afc0274710e97d50554001d3a0a4caa1
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
xun.zhang
Arthur
qing.zhang
salt.wei
wenjie.guo
Michael Birkler
chunmao.guo
lane.wei
just-trey
SoftFever
Lee Colarelli
adripo
liz.li
zhimin.zeng
yifan.wu
MusangKing
MusangKing