Commit Graph

256 Commits

Author SHA1 Message Date
qing.zhang 546322d1cc ENH: add solid infill pattern
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8878c8d5f0024c9cbde6040f317d0783dfc5eccd
2023-07-07 17:29:08 +08:00
salt.wei e567afdcb5 ENH: support exclude objects for klipper printer
Thanks OrcaSlicer.

This is just function for klipper printer.
NEVER used for BBL printer.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
2023-07-07 17:29:08 +08:00
qing.zhang ec756bc2df ENH: add acceleration para
thanks SoftFever

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie82934e2fb5cdb4ec77246e2d5cd6be36fdc7d5a
2023-07-07 17:29:08 +08:00
qing.zhang 739d8c9b28 ENH: filter small gap
thanks SoftFever

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9bffe629419455b2a7b4494aa595b711619939da
2023-07-07 17:29:08 +08:00
qing.zhang 346321379a ENH: add decel para
thanks SoftFever

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I95a1240c8d6ce7365055e840e526f279a55939e4
2023-07-07 17:29:08 +08:00
qing.zhang aa62c6e870 ENH: add jerk parameter
thanks SoftFever

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I6aadbffebc069167a460c991aa8fb711b754ff37
2023-07-07 17:29:08 +08:00
qing.zhang 112712e966 ENH: add top & bottom infill flow ratio
thanks SoftFever

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If4b2d203d8568a7c640425702b0a77ccea3b596b
2023-07-07 17:29:08 +08:00
maosheng.wei 23b4230335 ENH: [STUDIO-3179] The third-party printed material parameter page
Change-Id: I6a9d575bebb21a87e790aab973aecb1e6cc0e279
2023-07-07 17:29:08 +08:00
salt.wei 026eaf6bc4 ENH: manual setting for PA for 3-rd party printer only
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
2023-07-07 17:29:08 +08:00
qing.zhang 4f4516357f ENH: add seam parameters and increase wall loops
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id5c6cd6e97493f8912ce1857aed56eecace66cee
2023-07-07 17:29:08 +08:00
salt.wei 8905121af5 ENH: sync voron profile from orca
Thanks OrcaSlicer.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I02f6b712cc07907ae7cae4284fb75ddef053dfea
2023-07-07 17:29:08 +08:00
Stone Li 2910014887 NEW: render cali lines for X1 series printer
Change-Id: I0edbe9cac3be837702e0b03d66766291b012b4b8
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-07-07 17:29:08 +08:00
Arthur 0ce835dcd4 ENH: add option "remove_small_overhang"
Let the user choose remove or not.

Github issue: #1810
Jira: STUDIO-2992

Change-Id: I9c5e087d171d16d8d7318b36efe825a6cbc29c33
2023-07-07 17:29:08 +08:00
salt.wei 3ea602091e ENH: add back infill anchor for special case
These two settings is necessary for some
specific user case.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
2023-07-07 17:25:51 +08:00
Arthur a4eaf65b77 ENH: remove popup dialog of tree slim
This popup dialog was introduced to promote tree slim
style. Now it's time to remove it.

Change-Id: I34c0be56b4dc613e6e991dd87ab22eb4eaa1feb3
(cherry picked from commit 827c692a1877bfec914ef8f5a55c7357ed6e94d2)
2023-07-07 17:25:51 +08:00
Arthur 3d1f61c7ed NEW: add tree_support_brim_width option
Jira: STUDIO-2921

Change-Id: Id5fddc0b6f5ffe3beb9afb0be5f81a766fc5b21e
(cherry picked from commit 86d7b6016e48143aad03744a58d44042ff0a0b4c)
2023-07-07 17:25:51 +08:00
Stone Li f3fdfee569 ENH: refine Cool Plate to Cool Plate / PLA Plate
Change-Id: I186ea538465322220dcb088c9998716aad8398ee
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-07-07 17:25:51 +08:00
qing.zhang 7b12dcb6ea NEW: add concentric infill pattern for ironing
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Icd9f9fe0e39d86725faa98dd3eae82a4189130e0
2023-07-07 17:25:51 +08:00
qing.zhang b5c7532700 NEW: only one wall for first layer
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4ed31db361230b7192c210e506717e16bd28a6f3
2023-07-07 17:25:51 +08:00
liz.li 3c6e68553b ENH: add height_range
Change-Id: Ica4def5d54f9e0906d424eea1efd3545b79ed186
2023-04-17 15:39:02 +08:00
salt.wei e2d6ed99d1 ENH: add post_process back
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I05fc655080f3888255297d689552de84a81ed849
2023-04-17 15:39:02 +08:00
MusangKing 355dd8d463 ENH: Re-open pattern angle option under Support/Advanced
Re-open this option as requested by github users.

Fix Jira STUDIO-2083; Github issue-1102

Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
2023-04-17 15:39:02 +08:00
MusangKing 4cb8b1e125 ENH: Re-open support independent layer height
Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.

JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)
2023-04-17 15:39:02 +08:00
chunmao.guo a6b2a0d9fd FIX: support_style display value mistake
Change-Id: I506f5cb8b83dd7794b9b58a2d154ac3842f79dc5
(cherry picked from commit 3338bbd056912cd0555677b078a2eaf56924428d)
2023-02-22 20:09:17 +08:00
chunmao.guo 15126bda6d FIX: z_hop_types extruder_idx
Change-Id: I277811d78af89049fc466c16cfb968ffbd281831
2023-02-22 20:09:17 +08:00
chunmao.guo cbb84d2fb6 ENH: support filament_z_hop_types
Support override z top type in filament

This is handling for STUDIO-2082

Change-Id: I885d1d5e44d626e28b260ff569d0359e462a5f8d
2023-02-22 20:09:17 +08:00
Arthur 3a14acba99 FIX: support styles were not translated
Field labels are translated when being appended to combo box, so need to
add _ symbol.

Change-Id: Ib5207c4d357c3b9cd797264f872e2f6fb8859e6e
2023-02-22 20:09:17 +08:00
chunmao.guo 54e47bba33 ENH: support styles to sets
Change-Id: I18d4add12907d4d4a10980c1f1244e287934c34c
(cherry picked from commit 8ead53319222a2ab4bd76b434afcd657e5045fc7)
2023-02-22 20:09:17 +08:00
qing.zhang 6ea24dfd89 ENH: open skirt height
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie709c2f2987a7c351e03cb1e3c5a06817f43df19
2023-02-01 16:24:44 +08:00
salt.wei a349193dad ENH: alow user to change jerk limitation
This is handle for github issue #1175

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6e46245e274681502c118252e62ca9fd22a52135
2023-02-01 16:24:44 +08:00
lane.wei 7335f5d015 FIX: fix the crash issue when switch timelapse_mode or spiral mode
previous commit only fix the crash when switch spiral_mode
and will cause crash when switch timelapse_mode

Change-Id: If21acf3701e9519de55a08e183620678378f61b9
2023-02-01 16:24:44 +08:00
lane.wei 9a9113d3f7 FIX: fix a crash issue when setting spiral mode while wipe_tower disabled
wrong type used by boost::any_cast

Change-Id: Ic902c5775bc3cf1f22cb934c53b3ff4afa190e9f
2023-02-01 16:24:44 +08:00
salt.wei 534dcf11c1 ENH: remove bed temperature check
This is useless now. Remove.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id9a5e7822b19a74bf35670d5913214467b5a90ac
2023-01-10 19:08:26 +08:00
chunmao.guo ae959b7400 ENH: [STUDIO-1871] merge changes of user presets from other sessions
Change-Id: I2841ff4e23b18ebe7cdf374b69a494a4c05a49ee
2023-01-10 19:08:26 +08:00
salt.wei fca338582b ENH: add raft contact distance
For github issue #975

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3b2c4f105374fccf4fb0cdbfba5bb6181da6dd93
2023-01-10 19:08:26 +08:00
Stone Li 9bc46daf40 ENH: optimize the copy description format
remove "\n" from _L macro

Change-Id: If1beda4a77f1c2b42945657b7386e155b8bc7a20
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-01-10 19:08:26 +08:00
yifan.wu 5d9bb61f8e ENH: use spiral lift only when it is needed
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.

Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
2023-01-10 19:08:26 +08:00
Arthur e7e26b4b1a FIX: fix typos
Change-Id: Iba3727626d9102aa6c87d336ee1d49bbfbb7c479
(cherry picked from commit bf58651fffb94f9aeb4e85ff6c8a7b9feb3cab83)
2022-12-26 05:31:54 -05:00
Arthur 58aaa94fc7 FIX: empty layers and dangling hybrid support
1. fix possible empty layers (caused by continues walls)
2. fix normal node may be absorbed in drop_nodes in "tree hybrid"
3. popup message to ask the user to select best parameters for tree strong
   and tree hybrid.
4. auto select lightning infill for tree hybrid.

Change-Id: I7d172887a9b0e4f268267684e83fc02dc7ec6a0c
(cherry picked from commit bc6d130e86c252d7fc1f84c4df7da95050dd5d51)
2022-12-26 05:31:54 -05:00
Arthur 854eb0af95 ENH: change base pattern "None" to "Hollow"
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
   supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1

Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
2022-12-26 05:31:54 -05:00
Arthur 3e7b5e7657 ENH: [Tree Support] smooth_nodes and draw ellipse works
1. smooth nodes' positions
2. draw ellipse along movement direction
3. fix a bug of radius not smooth
4. fix a bug of Tree Strong having too large radius
5. fix a bug in plan_layer_heights: when wipe tower is
   enabled, independent_support_layer_height is false, and all support
   layers should be exactly the same as the object.
   Jira: STUDIO-1785
6. move support style popup message to on_value_change, so only show the
   popup when the user changes support type or style.

Change-Id: Ibced7a28f436d96000ee35a7194b68bb5a20a32d
(cherry picked from commit 0d814b07e433533c8de1b7a04bf52b577de0778d)
2022-12-26 05:31:54 -05:00
Arthur 29dbc77e91 NEW: add new tree support style "Tree Slim"
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
   layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
   tree slim is selected.
7. Use physical distance to calc radius

Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
2022-12-26 05:31:54 -05:00
salt.wei 22780a0be4 ENH: top and bottom pattern should be in shell settings
Move setting tab position according to user suggestion
in github issue #494

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie5b62e57d6d4c19504f40c62ffeff1418ceee1f8
2022-12-15 04:38:15 -05:00
chunmao.guo 15d6130b29 FIX: [STUDIO-1562] fix sizeof PresetComboBox
Change-Id: Ia64128f9fded669cd3e7eb1c64868fada76df6b8
2022-12-15 04:38:15 -05:00
salt.wei e3739a8a0f ENH: show nozzle_diameter for 3rd party printer
It's necessary to edit nozzle diameter and releted
setting for 3rd printer.

For BBL printer, keep it read-only

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I97e32967bb686b7fbb7ac306a2bb7e03b5d8c5c5
2022-12-15 04:38:15 -05:00
chunmao.guo 5a6263c9f3 FIX: [STUDIO-1525] not switch preset after cancel edit dialog
Change-Id: I91810298da40250e3c5def72737b2be6df764a3b
2022-12-15 04:38:15 -05:00
salt.wei 6551b86230 ENH: enable arachne for wall
Refer to prusa and enable arachne for wall.

Arachne also has corner case and cause strange
slicing result and bad quality when print, while
class engine is much better for these cases.

Provide option for user to choose.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ieb3a1c6a457ca610561f8734de4a122d74165afd
2022-12-15 04:38:15 -05:00
Arthur 4419703f41 ENH: do not add L prefix to empty string
Change-Id: I0fc7f57baf256452645be497020d75ffaf9c20f4
2022-12-15 04:38:15 -05:00
chunmao.guo 2f7946333d ENH: [STUDIO-1477] indicators for that has object configs
Change-Id: I4556b049cd6aa128a05f69c00fa14d8ea5bb3f39
2022-12-15 04:38:15 -05:00
Arthur 95ed039879 ENH: simplify support options and fix a tree sup bug
1. add default support base pattern (lightning for tree support,
   rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
   absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
   removed now)
5. fix the issue that tree support base may grow above interface by
   adding virtual nodes (distance_to_top<0).

Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
2022-12-15 04:38:15 -05:00
MusangKing d1e4cb430c NEW: Add "Support xy expansion distance" setting
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.

Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
2022-12-15 04:38:15 -05:00
MusangKing 2a8fe9ec54 NEW: Open "Bottom Z distance" setting for users
Users can set distance between support bottom contacts and object
once enable normal/tree support.

Jira: STUDIO-1383

TODO:Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.

Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
2022-12-15 04:38:15 -05:00
liz.li fafff5c1d1 FIX:fix search dialog cannot dismiss when alt+tab
Change-Id: I2fd0099685ce80e72f6214643b35535c274f7e22
2022-12-15 04:38:15 -05:00
tao wang 6f4e80bbb6 NEW:added dark mode
Change-Id: I3f61f1d93020e0a9dfba2c7d6cf6bf5194effcfa
2022-12-15 04:38:15 -05:00
chunmao.guo b209243b27 ENH: dark mode of StateColor
Change-Id: I5928898c50280c7f2eedbb9389032230c7e251c4
2022-12-15 04:38:15 -05:00
salt.wei 588f18ac58 ENH: improve archor of internal bridge
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.

This option controls how many lower layers generate
loop path.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
2022-12-15 04:33:48 -05:00
Stone Li 3b25d02eea NEW: set bed type for partplate
Change-Id: I876e24fb424b16eeb674313c7e0e03a228bc4b35
Signed-off-by: Stone Li <stone.li@bambulab.com>
2022-12-15 04:33:48 -05:00
salt.wei 13ca93adc8 ENH: some change to support layer height edit
1 delete adaptive layer height config
2 support load and save layer heights profile with 3MF

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I109b3b791c3130b5ab2df445e8ae5cb55a78cec1
2022-12-15 04:33:48 -05:00
salt.wei c1599aa138 ENH: add back even-odd mode
Add back even-odd mode to support slicing 3DLabPrint
airplane models

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
2022-12-15 04:33:48 -05:00
chunmao.guo ad636acac7 FIX: adjust filament parameter ui layout
Change-Id: I3d46894333ad165b43487b8472fc1451fbbf5224
2022-12-15 04:33:48 -05:00
salt.wei 35edf03eca ENH: add "ensure_vertical_shell_thickness" back
See the new requirement of the latest update at
github issue #317

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
2022-12-15 04:33:48 -05:00
zhimin.zeng 687476bc27 FIX: modify the translation
Change-Id: Ia147871df754f5188fb7a0a8fcfac01e2db18c1d
2022-12-15 04:33:48 -05:00
qing.zhang 6ca5df9118 NEW: add nozzle_hrc and filament required hrc
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed

either of it be zero means use other printers
or user want to print it anyway

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
2022-12-15 04:33:48 -05:00
salt.wei 11f74c21d3 ENH: add bridge direction option
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.

This is handling for github issue #340

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
2022-12-15 04:33:48 -05:00
yifan.wu 795c03164f ENH: move raft to advanced mode
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I805e9059405680926a5423b5aa0e23d97840a51a
2022-12-15 04:33:48 -05:00
salt.wei c61fd447c9 ENH: fix duplicate setting name
As title.

Test multi-color 3MF loading OK

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9b2791f8d020a051f934cda3027293a948b07088
2022-12-15 04:33:48 -05:00
qing.zhang 4d8eefb1ea ENH: open the filament_color preset
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idca08be5401aad1672adc46f9604338e3456f519
2022-12-15 04:33:48 -05:00
salt.wei 5e024f75b9 ENH: support specific acceleration for outer wall
So we can set lower acceleration for outer wall now.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
2022-12-15 04:33:48 -05:00
qing.zhang 9c32cff1dd FIX: modify the max volumetric speed of default fliament
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I6c84b35d0b4a663a3f2fdd96ce2fa5a7dd3208b7
2022-12-15 04:33:48 -05:00
Arthur 867a5c982c ENH: modify some words to simplify translation
Some sentenses are only slightly different which is
unnecessary. Making them the same can save a
translation and also keep consistency.

Change-Id: Ie59c0bf788a31ee0c6a0d792af7b3d532fe34f75
(cherry picked from commit eb69195569518e3be61e5a8887ea317fbe3e7302)
2022-12-15 04:33:48 -05:00
chunmao.guo 746d5960ba FIX: auto scroll to visible focus child in params panel
Change-Id: Ib3f7b7528c7fd221a824719d2199b4c85451fe67
2022-10-20 19:34:37 +08:00
tao.jin a84cf46699 ENH: refine UI of sending 3rd-party printer task
Change-Id: I47cd1682a495eb7aa6f230dfa41ee4f5c321fc72
Signed-off-by: Stone Li <stone.li@bambulab.com>
2022-10-20 19:34:37 +08:00
zhimin.zeng f996eedf49 FIX: allow smooth timelapse without wipe tower
Change-Id: I60d487faa96641dbf88f5502d2fa9ccb83e622c6
(cherry picked from commit 0286a7add9c698a2efd6d40910d72a83f06edba5)
2022-10-20 19:34:37 +08:00
salt.wei b8d9a2fdf3 ENH: add custom gcode back
Add custom gcode back, which can be inserted in
gcode viewer layer slider.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
2022-10-20 19:34:37 +08:00
qing.zhang f3744b8169 NEW: add link to infill pattern
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4a06d1443fc82efeff0ba3e94179914692b284c6
(cherry picked from commit 9e239305474d849343774a0af51876f4f82bcf99)
2022-10-20 19:34:37 +08:00
Stone Li 91d5ba2870 NEW: support send gcode to third-party printer
Thanks SoftForever for your works to support
sending a gcode file to third-party printer

Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>
2022-10-20 19:34:37 +08:00
salt.wei a0524cd25d ENH: set some settings to be readonly when printer vendor is Bambu Lab
It's meaningless to edit some settings, for example, machine limits
of Bambu Lab printer.

Set these settings to be read-only for Bambu Lab printer.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I61a21cfa2a2f574f690725125e226f4f258aa92f
2022-10-20 19:34:37 +08:00
tao wang 0761cbd1cb FIX:fixed clicking on first item has no effect in search dialog
Change-Id: Ifdbbf06a8b5c780155e394003470f6fa39a2b4c2
2022-10-20 19:34:37 +08:00
Arthur efec8fef2f ENH: move extruder clearance settings to machine setting
Change-Id: Id6d550548f8fb8639349450a4b12c6eef4f441cd
(cherry picked from commit bd4420e4af9626772c90d553bf1f3bb7fd2e20c4)
2022-10-20 19:34:37 +08:00
Tao Wang 6633ef4acf FIX:fixed the blocking module of linux
Change-Id: I06b357f9592631a729208514a3239f944a98cc96
2022-09-29 11:16:43 +08:00
chunmao.guo 851b6d6304 FIX: remove compare preset button in Tab
Change-Id: I268327bd2ea791de46d2972f08d528883d63da87
2022-09-29 11:16:43 +08:00
salt.wei 80575cd269 ENH: some change for external bridge
1 move thick bridge from support to quality page

2 Fix the issue that some times the external bridge angle
is not the best, and the bridge line is not the shortest one.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie26570fb289898f6b62960f9333e79aa92c08ae4
2022-09-29 11:16:43 +08:00
chunmao.guo d41e0db18f ENH: icon for param group
Change-Id: I435830615747aa850ed82621349f5fedfc29d860
2022-09-29 11:16:43 +08:00
Arthur abddb1edc3 NEW: add support_critical_regions_only for tree support
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.

Currently only works for tree supports, will need to copied to normal
supports if it works fine.

Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
2022-09-29 11:16:43 +08:00
chunmao.guo 673b6418c1 ENH: sync with ams filament
Change-Id: Ifa8b9487c934a18ad1003f380bbb53fa9288e387
2022-09-29 11:16:43 +08:00
chunmao.guo 4448409722 FIX: timelapse wiki url
Change-Id: I7d82c7ef1585cc5bd907f36bc7592449131efe6f
2022-09-09 19:59:27 +08:00
zhimin.zeng 4c063a8a32 FIX: modify the text
Change-Id: If9d6d629288f9016b5d8abfaff5ee44c99d90e30
2022-09-09 19:59:27 +08:00
zhimin.zeng 05625a5e43 ENH: add traditional timelapse without wipe tower
Change-Id: I77792fb1a7af2ee95242c6f2501371dc0745287f
(cherry picked from commit f6d434cc8b6c8d11d16bbabf9600c2f2b63868db)
2022-09-08 21:49:36 +08:00
salt.wei 4e1caa428d ENH: wipe_distance should not to be 0 or negative value
As title, fix github issue #220

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If63c839da1341ac2e16bbfa287c4e32564284d59
2022-09-08 21:49:36 +08:00
salt.wei 72221d2760 ENH: add slice_closing_radius back
For github issue #182

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I38c69bed03b6d70cb21d58b5f724b4dc3a8992a4
2022-09-08 21:49:36 +08:00
chunmao.guo b03a16054b FIX: add authors to param links
Change-Id: Ibcbd1d58e6201e1a668f350891eb1beda9fe4d12
2022-09-08 21:49:36 +08:00
chunmao.guo 30a97cc6dc ENH: params web link to wifi pages
Change-Id: Id79c65a973840cdc23cdf1b1c353d29da2216750
2022-09-02 13:16:54 +08:00
zhimin.zeng 0ab13a6abb ENH: Add Textured PEI Plate
Change-Id: I08178e86a8ccb23844cca00bc9d265df7507f910
(cherry picked from commit 8f101963ecab1352e2721ead83928b327d6c0dbd)
2022-09-02 12:52:18 +08:00
zhimin.zeng acb05dcf19 FIX: enhance interaction of timelapse
Change-Id: Iac13a485d0f5a458a435137619caddce39ad61fb
2022-09-02 12:52:18 +08:00
zhimin.zeng f745c5fea2 ENH: Optimize and design the time-lapse wiper tower
Multiplex existing wipe tower and revert old time-lapse wipe tower code

Change-Id: Ia1cba9808647ea900f691b2c5d5887077be12d89
(cherry picked from commit 61f41df572d11b7cc738c34f2624fd123cd9a6df)
2022-08-26 09:25:59 +08:00
chunmao.guo 66c89c62e2 FIX: wxWidgets asserts
Change-Id: I583edbde501c2bfe8adfa8fdb525479a379a4cb8
2022-08-26 09:25:59 +08:00
chunmao.guo 43cd7c8315 FIX: background color of title labels in sidebar
Change-Id: If71fdca36518129cdfdd1cdf939fb62592ec56c1
2022-08-26 09:25:59 +08:00
xiangdong.yang 39a0b06b39 FIX:fix image error during startup
Change-Id: I9aaca80622ef22b35f30c5b1e6072e983014139f
(cherry picked from commit e9abc0eea926a62fe519525c269c1ce33245df65)
2022-08-05 16:11:42 +08:00
chunmao.guo f56e9b4b21 FIX: layout in sidebar
Change-Id: I8f76d4f035c7458b98f285405e01404f2629df65
2022-08-05 16:11:42 +08:00
salt.wei a713573544 ENH: add extruder offset for X1 and X1 carbon
The extruder offset of X1 and X1C is (0,2).
All generated gcode should minus this value.

Also change the min speed of cooling buffer for
better cooling for small area(from pineapple)

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I06e58a26f8736ae24fa9da02477a9d19114daeca
2022-08-05 16:11:42 +08:00
chunmao.guo 3e5d660a37 FIX: toggle line for Model Tabs.
Change-Id: Ia3964d6509a97ae098ac79be06396fe1c39396d6
(cherry picked from commit 597fb201f3c19756cfd91808447beaf3a6227434)
2022-08-05 15:28:01 +08:00
Tao Wang ae45af1688 FIX:show msgdialog when user selected timelapse_no_toolhead first time
Change-Id: I08307aae17ccc93ae4448016504f68ab9e67558b
(cherry picked from commit 41a9cd933b6c98b7b2fbeea3b3863e3bce56e27a)
2022-08-05 15:28:01 +08:00
salt.wei 7a5771419a ENH: don't show extruder index when only has one
As title

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I752a43ccda1711a13f2fd152e9b7341195450cb0
2022-08-05 15:28:01 +08:00
salt.wei 5a2669dcc2 ENH: privide setting option of exclude_area
As title. User can delete the value to enable 256x256 printable
size

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia10454b7a7a1b28c04d8d41df9f3251875f6e74e
2022-08-05 15:28:01 +08:00
lane.wei e9e4d75877 Update the codes to 01.01.00.10 for the formal release
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
   small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
2022-07-22 20:35:34 +08:00
lane.wei 1555904bef Add the full source of BambuStudio
using version 1.0.10
2022-07-15 23:42:08 +08:00