ce65273dc0
FIX: fix some size error on dpi changed
...
jira: TUDIO-10053
Change-Id: Icd93aa0dd9a2c693d7b957f9ede5c6dafc415352
2025-03-24 08:29:27 +08:00
b1fa2421c0
FIX: remove some unnecessary refresh to reduce page faults
...
jira: [none]
Change-Id: If4dae82f7aae243db033fe9c8d4d1ab25f625557
2025-03-24 08:29:27 +08:00
ed1e9678c3
FIX: try to reduce page fault while idling
...
jira: [none]
Change-Id: I563cbf4a8ba8a4ae1e5b1b1f735753d3aef23e16
2025-03-24 08:29:27 +08:00
b47b19ed48
FIX:minimum sparse infill area not work
...
1. Filter small sparse infil after doing vertical shell detect.To make
sure the params always work, the logic should also be added after doing
internal bridge detect
jira:STUDIO-9872
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9d48303e156125dfab17ef95b73294013ab9fabd
2025-03-24 08:29:27 +08:00
e2f25326c1
ENH: add more process profile for H2D
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia0b3534e6e00d7f231cf759b0045473a3fb66526
2025-03-24 08:29:27 +08:00
edaaa0b705
FIX: the json val could be long long or string
...
jira: [none]
Change-Id: Ic06276adf5e7663d57ba1c4b6f9a57e897a9075d
2025-03-24 08:29:26 +08:00
9a9f634e31
ENH: seperate skippable part time
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8d2117c7a7114298e966d3e043604d738847a72b
2025-03-24 08:29:26 +08:00
f8369e8796
ENH: enhance ensure vertical thickness
...
This patch support completely disable ensure_vertical_thickness
Cherry-Picked eff2c16ecc2017f8186e5804f9ed4d71d87e9248 from prusa slicer.
Thanks everyone involved
Co-authored-by: SoftFever
Co-authored-by: Vovodroid
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia00b9fb2dc5839d0e7306010260c1276c35c5d66
2025-03-24 08:29:26 +08:00
288b1eddc5
ENH:add "nozzle_has_ams_then_ignore_ext" deal
...
jira: STUDIO-10245
Change-Id: I77e49dcbdfc3acd9473ca3885c6cc7eebdd0d3fa
2025-03-24 08:29:26 +08:00
7a55808ad1
FIX:The width of Search box is determined by the width of Input box
...
jira: STUDIO-10186
Change-Id: I819bfafac5fbc0801b308fd2d384c2a461db0ad7
2025-03-24 08:29:26 +08:00
862f7d1122
ci: update network module based on commit 23979ad
...
Change-Id: If112df843fb9186d50c95252999019792e83c046
2025-03-24 08:29:26 +08:00
e2bab560e5
ENH: CLI: exclude the time of erFlush from main_predication
...
jira: no-jira
Change-Id: Ie069fd957227c50619613a50ed5425b00efa4133
2025-03-24 08:27:08 +08:00
d2ae5ea32c
FIX: wrong group result in some cases
...
1.Caused by too big tolerance
jira:STUDIO-10236
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0ba182991bc70ca2d3a34a85b87fa7539c5e50d9
2025-03-24 08:26:48 +08:00
a17aa8c701
ENH: pva filament should use normal support type
...
1.Always pop up to switch support type for PVA filaments
2.Rename the old "on_filament_change" to "on_filament_count_change",
add a new function as "on_filament_change"
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5a96f2334bbe016db6661864d44e66c1fc5660f
2025-03-24 08:26:48 +08:00
5860af4401
FIX:optimize the layout of error messages
...
jira:[none]
Change-Id: I06ee3399b15ca78257e92af4e9ea0be69ffd1b4e
2025-03-24 08:26:48 +08:00
9274e75b3e
FIX:fixed the issue of macOS crashing when closing windows
...
jira:[none]
Change-Id: I716734c17c67a7022d9a78889bfdff1eaf54bbec
2025-03-24 08:26:48 +08:00
075d04ad4a
FIX: update some hms files
...
jira: [none]
Change-Id: I419d389fe74038919ca4e17d407e404636062b76
2025-03-24 08:26:47 +08:00
0b24359f59
FIX:The extruder index defaults from 1
...
jira: github 5916
Change-Id: Icae2c4c272b80de8055cc3aeb91584df621fc436
2025-03-24 08:26:47 +08:00
068f1d1256
ENH:reopen "enable_merge_color_by_sync_ams" option
...
jira: STUDIO-10227
Change-Id: If6e070f4daf1f96ec667f65ce4872bd942d866ab
2025-03-24 08:26:47 +08:00
5693d65178
ENH:modify "Delete all" shortcut key
...
jira: none
Change-Id: I5c90fc2f2d7e2482bb31527e8aae29089bbb69b1
2025-03-24 08:26:47 +08:00
2353d0366d
NEW: add config: prefer_to_use_dgpu
...
jira: STUDIO-10068 / STUDIO-9387
Change-Id: I78fe0e865e9665bbf3669e4834a39af624cde29e
(cherry picked from commit cc41c008548b4dc2874333afd63ef0035070cda5)
2025-03-24 08:26:41 +08:00
c16d43ce31
ci: update network module based on commit abc4f25
...
Change-Id: I0ae2411808520f2cfb1117845d05eea93ee0c07a
2025-03-24 08:26:41 +08:00
d0f89eb862
ENH: Add parameters for extruder page of printer preset
...
jira: none
Change-Id: I8eb37e41bdc4b2b1f2328acee324c6fad30e391c
2025-03-24 08:26:41 +08:00
1aad582e08
ENH: add lift after printing the wipe_tower
...
and reduce the travel speed inside the wipe_tower
jira: none
Change-Id: I3b07ee62623e0cdc2f1824f0011f95776020bee1
2025-03-24 08:26:41 +08:00
1b467b13c4
ENH: add flat ironing before toolchange
...
jira: none
Change-Id: Iabe121f9523b662fc90c18365aa642583635a126
2025-03-24 08:26:41 +08:00
5a2a609979
ci: update network module based on commit 007c323
...
Change-Id: Ia689660acc57815b6450efc3ded338e07b26ea78
2025-03-24 08:26:41 +08:00
801a03ab7b
ci: update network module based on commit 2560ca0
...
Change-Id: Ie6fb153b1abdac4a6d4d203ceeed2180499b0f0f
2025-03-24 08:26:40 +08:00
b651cee316
ENH:Import 3mf into existing projects and remember previous selection
...
jira: none
Change-Id: I799c3aa240d614fc4ff7bf8ff02a9879d1a4b459
2025-03-24 08:26:40 +08:00
b20700ddc1
FIX:modify log
...
jira: none
Change-Id: I1c6baae3a215a5bc06d5c126acb9a2003203846d
2025-03-24 08:26:40 +08:00
a967c41edc
ENH: add wiki link for mixuse of pla and petg
...
and add wiki link for tpu and brittle materials
jira: none
Change-Id: I15202158cc2ff9b710e80e181bcdf9659e93ff75
2025-03-24 08:25:45 +08:00
48368ed472
FIX:Elephant foot compensation simplify expoly leads to contour loss
...
jira: none
Change-Id: I4df620e1a0c55803499ec979fa3ea22394f32699
2025-03-24 08:25:45 +08:00
f2d9902ff3
ENH: update timelapse for X,P
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I32c8288511da98cc1806697673b476b17556164c
2025-03-24 08:25:45 +08:00
1c8da5f99c
ENH: add timelapse for A series
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9028d7117d1d184a8f7baad0b0ae4492a35481f4
2025-03-24 08:25:45 +08:00
03607bd975
ENH: apply scarf seam on auto compensation circles
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I339acf82ec1af9ed0a8f973e76b73c0eae608767
2025-03-24 08:25:45 +08:00
53a70e539e
ci: update network module based on commit c3c46a4
...
Change-Id: Icdb655a906b99c2ae69fd7a5c8cf4a679556e705
2025-03-24 08:24:29 +08:00
4715fa14ed
FIX: 1.The gcode started by a space cannot be matched
...
2. use most used extruder for timelapse without wipe tower
3. apply retract_when_changing_layer for multi_extruder
jira: none
Change-Id: I4ff00573fd8a6ee9fa42877e3e7056d547e4d864
2025-03-24 08:24:24 +08:00
05c3616b0d
FIX: Duplicate traditional timelapse warnings
...
jira: STUDIO-10188
Change-Id: Ib391fc3b40dcf27d9c722fce2bae803dbc7fd5c9
2025-03-24 08:24:24 +08:00
74a4b1bd49
ENH：modify interface of wipe tower brim_width
...
jira: none
Change-Id: I22e3c30aa6320e7e66316fa15b6c06e26e458a94
2025-03-24 08:24:24 +08:00
6350ebf9b6
FIX: FIX: fix width error of rib wall
...
when enable timelapse_print without toolchange;
jira: none
Change-Id: I4c89acc70ee122c0ad504d97c003ebb4016567d1
2025-03-24 08:24:24 +08:00
8ce8c3ffbb
FIX: fix error path in wipe_tower
...
jira: none
Change-Id: Ia13ae92c61de0d5a361e7d00ec85ff21a04dfc6c
2025-03-24 08:24:24 +08:00
bfe30573c6
ENH: replace a dailytip png
...
jira: none
Change-Id: I721cdb7a44f2db13dc947c838a2eed2d749f8ecd
2025-03-24 08:24:23 +08:00
37aba65efe
ENH:update and translate text
...
jira: STUDIO-10214
Change-Id: I36e3613103df7e3f65069415378f492015518e8c
2025-03-24 08:24:23 +08:00
62fff9dadf
FIX:add "read fail" deal for bambuStudio.conf
...
jira: STUDIO-10215?
Change-Id: Ib6dca514a43f3c91948df56195ba323aa9ce308e
2025-03-24 08:24:23 +08:00
751aece03e
FIX: optimize the downloads path settings
...
jira: [STUDIO-10056]
Change-Id: I1ce7da2eeb34bcd7609b281b0a1735f848660b99
2025-03-24 08:24:23 +08:00
d0bf00d39d
FIX: strange offset with gcode in preview
...
1. some testing code results the strange behavior,
just remove them
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8339473f7f3796d81fe6f1aebcfcff98b3b9f5d8
2025-03-24 08:24:23 +08:00
4d616513be
ENH:Disable printer selection when printing from SD card
...
jira:[STUDIO-10145]
Change-Id: I7d0b95afa3c0403121805090a13b2ab6d46e89b9
2025-03-24 08:24:23 +08:00
30454bd166
FIX:cleared the filament change suggestion
...
jira:[STUDIO-10144]
Change-Id: I20c219cdefe8de2214e03db94db552d32a40f374
2025-03-24 08:24:23 +08:00
c66aa632d8
FIX:fixed mapping issue printing from SD card
...
Change-Id: Iad6b4b6ddd67f1c51fbfd1207893549b9cf746b9
2025-03-24 08:24:22 +08:00
3dbe340cf9
FIX: the WIFI signal is not refresh
...
jira: [STUDIO-10185]
Change-Id: I5b68bb487dc13ce32d7af6df72ff4c7cada6137b
2025-03-24 08:24:22 +08:00
eb90f16dd5
FIX: move the function to API
...
jira: [none]
Change-Id: I2b30082148d6d9b937a218e37464727ba8fdf131
2025-03-24 08:24:22 +08:00
zhimin.zeng
xin.zhang
xun.zhang
zhou.xu
gerrit
lane.wei
tao wang
jun.zhang
jiangkai.zhao
qing.zhang
liz.li