1. Use nlopt and clipper offset togather seems not stable, very easy to
crash. We do the offset outside nlopt now.
2. Fix a bug with finalAlign where objects may be translated to overlap
with excluded region.
3. change the words of support_expansion
Change-Id: I22e37b20e4ae16f47bde206de90845616e4cefad
(cherry picked from commit 1c26e5d2862fd3f3292971b5c749420bfb2cdf0e)
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Should not insert new line in post process
which changes the the final line id in gcode
file
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib8b837cf313a1308260db88bf5390fefe9708cc8
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
When travel in x-y-z move, the acceleration should
be limited by trivector rather than one axis.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If8e5d394cf5d8772d324b9c851c047d9235d9b6b
Add paint-on support on vertical faces of slender rods
ENH STUDIO-970/1285
FIX STUDIO-1183
Change-Id: I36b398f9c1c1341bce080ec3d454dcc6e6f991e8
(cherry picked from commit 65ee2c8d74284b21bfd34a1059e2005998d749c5)
Always draw a wall before infill for 1st interface.
Jira: STUDIO-1402
Change-Id: I9cba46f9bcacbe6c78a82bbb7099cc1d1182cb97
(cherry picked from commit d7381adb78c99414f538db82f0ac1f2de2e968cf)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
1. use face_normals as convex_hull normals instead of quantized normals.
2. The quantized normals will result in bad orientation because of accumulated error.
Change-Id: I8e554905dcec430738135cb8a9f08d8e0fdfecae
(cherry picked from commit 33c474f6f6e7469aed75e981e700e0279cb23de3)
[STUDIO-1079] Large plane not stick to bed
[STUDIO-1437] Model auto flipping bug
1. Changed the orientation threshold so that some tiny rotations wont be ignored.
2. Added flipping detection. Rotation with same unprintability will not be excuted.
3. Added the weight of first layer area to improve large planar face orientatio performance while not influence other objects with small first layer areas.
Change-Id: I1efc9252c90bc053e65cb71e7770cb8d0305cb6e
(cherry picked from commit 1eda67e4fd0cd2536af219e0c225fc08949b5023)
1. change default bed_type to "1" in app_config
2. if old app_config.bed_type is 0, change it to 1
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I9923187ab480b0a4991bfbc13892bfb43b2a990b
support_critical_regions_only may generate wrong supports on sharp tails
Test case: calicat.stl
Change-Id: I73671d9bf0f9c27ef70efa5765cd291761c4d18d
(cherry picked from commit 8ff2ac7ce437dc2f9eee6068d596294c054dee1b)
1. Should start from bottom left if there is excluded regions
2. avoid exclusion regions in fixed_overfit_topright_sliding
Jira: STUDIO-1422
Change-Id: If88ecf86a0485bd478a77df8cfd4942df8ca27ac
(cherry picked from commit a8393de51bd178b731ef4c7201a5fe3247d97a1f)
Add default type to plate bed types.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I26f3a64dba4a19b0d882b828f1ee54c84df1879c
(cherry picked from commit 1ebed465d2b3bcd482dd4ba7a5930b721c79fc13)
if the brim of an object exceeds the bed area, it will be clipped before transformed to G-Codes
Change-Id: I68d700a85e1d28a5e337e53d614266f6e5e0a653
(cherry picked from commit d19ffaa7bdf4b0ab750119d9ef6252491d936f3e)
1. improve auto-arrange compactness around wipe tower
2. do not show "Avoid extrusion calibration region" for P1P
3. encourage objects with similar height to be arranged together
Jira: STUDIO-1364
Change-Id: I5efa61a676c453618cdb3915fb98928d07138deb
(cherry picked from commit 571ee0c6d91d8a5f6a60838052f09d49d85f12ed)
The tolerance of orientation filter is too large.
Jira: STUDIO-1375,1376,1382
Change-Id: I794a161e74acbcf2e13c03dcc6e5e51d6b4e1f23
(cherry picked from commit 9d8f838fb06b8c0d4efed3e50d33db410efae360)
Wipe tower is needed if support base and interface use different materials.
Jira: STUDIO-1336
Change-Id: I006ece952aac1a0f0a57721c2cd1b52b2ceee28a
(cherry picked from commit 1a387e4b1607dee36f5abe499892f027e244fbeb)
1. only show label of object in current partplate
2. disable label under gizmo
3. fix a issue of label not updated in time
4. add some logs
Change-Id: If20196a566cc45a4a0c2bcc6bbe212aaa9f74dd3
(cherry picked from commit 3e92ed61e9687d5351a9bb2bc6d25b568cd1c973)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
1. parallel load object files
2. only load object used by some plate(cli)
3. improve the loading speed when generate objects by using reference
Change-Id: I2719651e715f2e35326e760c4b7cdb3114f54992
I improve the cost function to align big item better.
JIRA: https://jira.bambooolab.com/browse/STUDIO-1221
Change-Id: Id5a16c127ec51bf7463e331058cb1a8f78b764ca
(cherry picked from commit 39773a901df82081c7d9d089807a52aa09e6a498)
if the region is top surface as well as bridge
use bridge path
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia23910e4c49daeacf12d2f40d21a7ca319ddcfb7
1. support bed_type for each plate in CLI
2. don't render the calibration thumbnail under CLI
3. fix the plate box not generated issue
4. refine the slice_all button's status logic: from all slicable to one slicable
5. fix serveral issues in multiple plate's switch and slicing
Change-Id: I6193a799da0367068169ce315d1fcc9098357fd1
Arthur
salt.wei
lane.wei
zhimin.zeng
qing.zhang
MusangKing
liz.li
shuai.liu
yifan.wu
chunmao.guo
tao wang
wintergua
Stone Li
miaoxin