1. change type of transition layers below interface to erSupportTransition,
2. fix the number of transition layer above tree branches,
3. change the default setting of support_interface_pattern to smipRectilinearInterlaced,
4. change the default support_style to HybridTree when interface is soluble
5. FIX: conflict between xy_expansion && split_hole
jira: STUDIO-10239, STUDIO-10314, STUDIO-10319
Change-Id: I3eb392ccd005acedb001aa862d5bf3eb104c5293
1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
The old speed 50mm/s is too high and cause some print quality problems.
Also change the display of overhang speeds to better adhere to the code.
jira: STUDIO-9641
Change-Id: I6efa981db5bf88a9cf5bb70abb443cdfa1783025
Jira: none
get z direction continuous info
smoothing speed based on the max speed of the loop
rewite the pipeline
set perset param to enable z smoothing function
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib0e6a6a353c92a441a0c99a8d3d7902f7aeae6df
Bridge detection is not accurate. Let's be conservative.
jira: STUDIO-7116
Change-Id: I92ed02e655a1a824169ad261336c65cfb4b53248
(cherry picked from commit 77fd0c5214b2ddab956d1779908872633364779f)
Jira: none
add speed transition between discontinuity speed
detect bridge-wall and only use bride speed on bridge wall
fix the bug that not use overhang speed while support z
distance is 0 on arachne mode
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I72a1504544fe1ed7bd184ca073bd1b52cd2dcd75
Set brim gap to 0 makes brim too hard to remove
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie37736d3a96735759b432b4b61dcc4a82c422515
If the layer height is lower than 0.2, support_top_z_distance and support_bottom_z_distance should also be lower.
jira: none
Change-Id: I3d2904bbfd81330df74c389a3978b721c03caab5
(cherry picked from commit 83c61556de3b2d00a7735b386171f83495874cc2)
1. Set brim_object_gap to 0 so brim will be attached to the model
2. Set extruder_clearance_height_to_rod to 34mm for X&P series to avoid
collisions
github:#3371
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia554519f2c0cc7bdb5b768ea996a7eed4e2e61d6
1. Set elefant foot compensation in A1 to 0.075
2. Add some missing params
Github:#2621
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I064d5e0b23297fd6491af8b97bad0790b077120d
1.Set elefant_foot_compenstation to 0.15 for X and P series
2.Set elefant_foot_compenstation to 0 for A1 series
github:#2621
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I199ca9e37ea1b3f7087fbef4166b0d90acfaedc3
Now normal support also uses this option, so we can't default it to 1, otherwise normal supports will be too hard to remove.
jira: none
Change-Id: Ic5700af5c17e3a7b265c8915f28b0db35c6e06e6
(cherry picked from commit 6b84a9826da108b76569e686bd9def0b23ae29fd)
Can not see obvious eleplant foot after printing
JIRA: None. found by self test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5993b3a2dbb6f4f6a6b8a1714654f1213e4b90f2
1. Add small layer height process profiles for X1 series
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifb826ccf889016de320b5eb23cbe2eae341db28f
jiaxi.chen
zhimin.zeng
qing.zhang
xun.zhang
jiangkai.zhao
Arthur
salt.wei