1. Update A1 machine gcode.Add multiple layers head wrapping detection.
Avoid the issue of excessive load angle in G28 X.
2. Correct some spelling errors in A1 and A1 mini machine gcode
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia830d45842ed7797c89babd3f05c00abc5db0c4c
1. Set elefant foot compensation in A1 to 0.075
2. Add some missing params
Github:#2621
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I064d5e0b23297fd6491af8b97bad0790b077120d
1.Set elefant_foot_compenstation to 0.15 for X and P series
2.Set elefant_foot_compenstation to 0 for A1 series
github:#2621
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I199ca9e37ea1b3f7087fbef4166b0d90acfaedc3
The profiles are cherry-picked from orca 951293c6426e51d5f402.
and rename the filament profiles.Thanks Orca
github: 2335
Change-Id: I57a6e93aeef498439ebb8e95bb587dc9e2ab3496
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
1.Add "in_head_wrap_detect_zone".Detect if the model projection enters
a specified area.
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6aed5a782d2f33f023bdc19cf06dff0957828eeb
1. set wipe tower position to default when duplicate object
2. add cli_safe check logic when switch printers
JIRA: no jira
Change-Id: Iebe62f8be6acd6f44743abf3b0fe92ec04c94197
Now normal support also uses this option, so we can't default it to 1, otherwise normal supports will be too hard to remove.
jira: none
Change-Id: Ic5700af5c17e3a7b265c8915f28b0db35c6e06e6
(cherry picked from commit 6b84a9826da108b76569e686bd9def0b23ae29fd)
1.turn on MC board fan by default on P1S
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5b2f7868e350942fb8b7baf7d429e22a0987184a
(cherry picked from commit e866a575b6b7d9552f7412f84272f4b48dfc3961)
1. Modify texture bed temp to 65
2. Modify max-v-speed for ABS
3. Modify some params in Generic PA
4. Modify PLA,PVA params
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I42584a6015b8526f6bbb93024316968198bd76ce
1.Modify the PEI bed temperature of PLA Basic, Matte, and Tough to 65 in
A1 mini. Set the bed temperature for the first layer of Bambu PETG-CF
to 65 and 70 for the other layers
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia902bbb7f824082d5346709d781cac64296f47a8
Many params are not right.Just use default
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5c4a1e8b046940e174f5681a79031b5f20fcafc5
Can not see obvious eleplant foot after printing
JIRA: None. found by self test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5993b3a2dbb6f4f6a6b8a1714654f1213e4b90f2
1.Fix the problem about first layer can't set temperature
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id4087ba789fb6127d8a1ad75ae518aaffa05815d
1.Modify generic PPA-GF max v speed to 6
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I18cfdcb9037b9d9fda6ec60d12c6057a5f9e9bd0
1. Set max volumertic speed to 11.5 for PolyLite PETG
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5ee019d07124870893df9ab636851adc0f2a6425
1.Optimize the heating sequence for the X1E chamber
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I22650b71961218b32247a84eefb9bf8dc5dceeb7
1.shorten prime line and change x axis freq sweep
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3582f7fb17dfa173f33ad74f49d7d2b70036df5f
1. Remove some keys with tree support
2. Modify thin_detect wall and adaptive_layer_height
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie342c27d4dcd2a262993e472a203ce92da14dbb2
Add more photo shoot comamnds in the end gcode to prevent sharp ending of timelapse video of A1.
Also fix a bug of using timelapse_type=2 in end gcode.
Jira: None
Change-Id: I2a426be7a2f7d22b10b79c2b7eb1a04538b5340a
This has no any influence on function. Just make
the limitation more clear and easily maintained.
So people can easily see timelapse function is not
supported in i3 printer
JIRA: none
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0c88a5a0ce4b7e42117842c9673e1df022fdf618
1. Add small layer height process profiles for X1 series
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifb826ccf889016de320b5eb23cbe2eae341db28f
this patch is cherry-picked from OrcaSlicer
Thanks Michael Birkler for adding Tronxy profiles
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3aab8d5e9c03f6632bdde292f91232392eaf7cf7
Models with overhanging areas are easily knocked down with Z hop height
at 0.2mm
Github: None
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I65fa14fe5f217c2d1384569efa8c2233c14dde83
Fix percent in support interface speed in 3rd printers
jira:STUDIO-4292
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id030922546c7246f205d0e2b9294f607ce550696
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
for X series and P seris with nozzle 0.4mm.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Iaa15c4ffaeed455f99261151020f13d498c615f4
(cherry picked from commit 3dafafe3a66863b7af743b4fffd41d68b9c24737)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
This modification is based on Orca's commit abc0f1c68279c4adf1
feat: added Anycubic Kobra 2 (#1765)
* feat: added Anycubic Kobra 2
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix: corrected buildplate texture size
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix: corrected max layer height
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix bed model
---------
Change-Id: I5a82ae29385e8e66499503f40357166d60fb6d2a
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
Remember C10 is for traditional timelapse, C11 is smooth timelapse.
The mother profile of all machines should be right.
Change-Id: Ia941f743d2a81ef4b5b4fa08a37ca654eb86d0d7
Thanks bhast2 ,these profiles are based on his original version.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I23dbb7d8b80b8fc37ecd76c44bf1c547413bc434
(cherry picked from commit 4a58cee3ff08fcd5f542a7779f3a1dfad46a4509)
Thanks OrcaSlicer.
Also fix wrong setting id of these profile
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib34a46d1b1ae5681b755a7f5b1ef227b502b5262
Thanks OrcaSlicer. Also fix wrong
setting id in orca profile
Add one py file to check whether has duplicated setting_id
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8461a1ae754253d8265ae5239fe91cc7ec775564
Thanks orca-slicer. Also fix the wrong
setting id from orca.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68363dbc2a261a6ae13ac5569972446e032e77f0
1. It seems there are a lot of buffered frames in IP CAM. Have to
wait enough time untill all buffers are flushed.
2. From watermellon's suggestion, increase travel speed duing layer
change, to save time and reduce oozing.
JIRA: STUDIO-2167
Change-Id: Ia2ec0bde216e90207897c00c395f7e02ea2fe342
(cherry picked from commit 9c85a7c68617b1628e1698912da20f1ebc69ec16)
It's not necessary to pause before photo-shooting, but after it.
Pausng by 50ms should be enough.
Jira: STUDIO-2167
Change-Id: I88ba5db1d6cce390ae5e26ac03533b0ee277b5bd
(cherry picked from commit ae34c0b9e875d1e52798a5359b0cce2151942fb8)
move to the middle upper edge of plate and ratract after calibrating to avoid leakage
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idb09aaafee3bfccfd7c14d1140778498195b98c3
JIRA: [STUDIO-2226]
0.4mm nozzle contains different layer heights but has
the same preset threshold angle (30 degree) which is not reasonable.
Hereby, five of them are adjusted based on the overlap ratio.
Change-Id: I96300bf202c3a5fc4428186875a9212c32524ff2
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
Bambu pa-cf has been modified, generic pa-cf
should be changed as well
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie859b41bd4d138a5fab204d6ad6a79806c3f0a9b
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
1 Use 25% infill density. 60% is too high and useless
2 update filament change gcode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9a1fbbfb56b61723aa6e9d6bc44a22f467d92562
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
Generic PLA silk should use lower filament
volumetroc and retraction
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8ba11094afc0274710e97d50554001d3a0a4caa1
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
As title. And also not make printing time increased
too much.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I79f578227c5d81e76d8dd9254c43a3cb90109132
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Towline may be even lower than the upper rod. Let's
take away 10mm tolerance.
Change-Id: I13972fc4ecb0671e1af4b2c6d102e319417e532f
(cherry picked from commit cedcb862556c8c9014a91ef2aad8f39fc118d925)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
This is change requirement from printer developer
for github issue #393
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ief306d89dba70d8515050cbd842edc4e1d22822e
XunZhangBambu
wenjie.guo
YGK3D
zhou.xu
qing.zhang
lane.wei
Dmytro Chystiakov
Arthur
salt.wei
Catalin MARINCIA
maosheng.wei
Michael Birkler
chunmao.guo
just-trey
SoftFever
Lee Colarelli
adripo
liz.li
zhimin.zeng
yifan.wu
MusangKing
MusangKing