The old speed 50mm/s is too high and cause some print quality problems.
Also change the display of overhang speeds to better adhere to the code.
jira: STUDIO-9641
Change-Id: I6efa981db5bf88a9cf5bb70abb443cdfa1783025
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
1.Should get value by filament id instead of extruder id
2.Fix many other issues caused by incorrect usage
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3278d7de0f8976a97c9e5ccef80bba4a58553f5a
(cherry picked from commit 30c51dd1171fc16ba778308745fab2eb246aedd0)
Jira: none
get z direction continuous info
smoothing speed based on the max speed of the loop
rewite the pipeline
set perset param to enable z smoothing function
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib0e6a6a353c92a441a0c99a8d3d7902f7aeae6df
1. Set shared retract length size to 2. Filaments in one extruder
shares the param
2. Move toolchange function before unretract function in append_tcr
to get the correct logic
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I215a542ce36107071fad39f1f9e30234fb19a3a0
Jira: none
while there is no non support filament
set first print filament to initial_no_support_extruder
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If2fee560772c9a7cfa1855efc85116fb7df04760
1.Only do reorder if requseted.In by object mode,we only need
to collect the filaments in the object for filament grouping
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id88f2449c6d3c5d45b9ff87513308d997fa72da1
1. Pre cooling extruder after the extruder used
2. Pre heating before the extruder used
3. Refine the structure of finalize function
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I98c92763c006fc9564db45a4a5d542b891ea1aa2
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
1. Caused by setting the current filament to filaments used
in machine start gcode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If6789b1e02aadc6d03610b7b7cc4c829ae767a7d
Jira: none
if the fist print filement as same as the filament be set on start gcode
not insert filment change
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0114f287fff9be276a90772537d1910df18dec61
Should use filament id instead of extruder id
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I669092da6902158ad5f89d4814c78eabdfb2e7c7
1.In auto mode,display the statistics of auto mode and single
extruder
2.In manual mode,display the statistics of manual mode and auto mode
3.Support by object mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If54c4db79f33d5278c0f18d01ab0518e8660f9c7
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
zhimin.zeng
qing.zhang
Arthur
xun.zhang
jiangkai.zhao