0cd8e00df3
NEW:reducing purge through retracting filament
...
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
2024-03-25 15:29:19 +08:00
188873202a
ENH: update A1 A1mini nozzle volume
...
1.Adjust nozzle volume to 92
2.Update profile version to 1.9
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I8f54a64da7047f2631d62b87487a190e640563bf
2024-03-25 15:29:19 +08:00
62c775b232
ENH: update A1 start gcode
...
1. Modify extrusion compensation line width from 5mm to 1.5mm
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I87079343ef1eaee0aeadfcb91a833fa83ea109ac
2024-03-25 15:29:19 +08:00
3c12eb63de
ENH: reset brim gap to 0.1
...
Set brim gap to 0 makes brim too hard to remove
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie37736d3a96735759b432b4b61dcc4a82c422515
2024-03-25 15:29:19 +08:00
52855ac20d
ENH: update filament start gcode for PLA
...
1. fix the mistake in M142
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I2e56c753650c0fc1efeb67e404528ec3c857585e
2024-03-25 15:29:19 +08:00
087e1abafa
ENH: update A1,A1 mini start gcode
...
1. replace G380 with S3 to avoid collision
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I746e59b8cb18a21f281aa87a2c927c81748d6aea
2024-03-25 15:29:19 +08:00
a314d4ab2f
ENH: add M142 command
...
1.Add M142 command in filament start gcode for PLA
2.Add M142 command in X1C/X1E machine gcode
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I71ae4b20310924cad379a952d2fac478e8382d7e
2024-03-25 15:29:19 +08:00
9155058cdc
ENH: modify chamber fan speed to lower noise
...
1. Modify chamber fan speed in filament gcode for PLA
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I21b12bcd7cbf691fca4090fb39193aea972795e4
2024-03-25 15:29:19 +08:00
7ca231b635
ENH: modify some filament params
...
1. Modify some params for Bambu PC,ASA,ABS. Reduce fan speed.Add fan
layer time
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ibd73dd2ed4848c5ade4f38fd491c85369c08cece
2024-03-25 15:29:19 +08:00
1b1be9d59e
NEW: add some new filaments
...
1.Add generic pe-cf,bvoh,PHA
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I27ac9dec32a6ab74698c3746283bcbeca8379707
2024-03-25 15:29:19 +08:00
84fe7393e7
ENH: set default support_top_z_distance
...
If the layer height is lower than 0.2, support_top_z_distance and support_bottom_z_distance should also be lower.
jira: none
Change-Id: I3d2904bbfd81330df74c389a3978b721c03caab5
(cherry picked from commit 83c61556de3b2d00a7735b386171f83495874cc2)
2024-03-25 15:29:19 +08:00
7b92f147e2
ENH: modify some profile params
...
1. Set brim_object_gap to 0 so brim will be attached to the model
2. Set extruder_clearance_height_to_rod to 34mm for X&P series to avoid
collisions
github:#3371
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia554519f2c0cc7bdb5b768ea996a7eed4e2e61d6
2024-03-25 15:29:19 +08:00
c373d6b198
ENH: add description in profiles
...
1. Add profiles in process profile
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I8d1f20aaae08c2dbc69926258384c2b7de0021ad
2024-03-25 15:29:19 +08:00
044462f8da
ENH: update P and X series custom gcode
...
1.Update filament change gcode. Optimize the flushing and
wiping actions when changing filament
2.Upadte machine end gcoed.Avoid the print head from colliding
with the printed material at the end of printing
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I79868d41fbaa41269fe21644bee487556a7b66fe
2024-03-25 15:29:19 +08:00
c7d4dba209
NEW: add more filament profiles
...
1. Add Generic PE,PP,PCTG,EVA,PP-CF,PP-GF
jira:new
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ib86051a8910b5831dddfd13ef736f4f421366b0d
2024-03-25 15:29:19 +08:00
7e9dc8b998
ENH: update profile version
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I23b2fa5c1415917a80ee7abd5f3eb5c48b64baeb
2024-03-25 15:29:19 +08:00
53a4de5674
ENH: add new filament type PA-GF
...
1.Set Bambu PA6-GF type to PA-GF
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I79b4896ed9901e8525fd770f4a37713729b7e420
2024-03-25 15:29:19 +08:00
5fe6a1e6ec
FIX: incorrect layer height range in A1 0.2 nozzle
...
1.Set min_layer_height to 0.04,max_layer_height to 0.14 in A1 0.2 nozzle
2.Fix some spelling mistakes in gcode
Github: #3475,#3477
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Idca0a8dace0eb96492bf3b55c6786dc4e8bab057
2024-03-25 15:29:19 +08:00
9b8a59c0bd
NEW: add filament Bambu PA6-GF
...
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I4305f87aa84054551396fab772e50fa262d9a2b5
2024-03-25 15:29:19 +08:00
b5ad12dd09
NEW: add filament Bambu PVA
...
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I80e296f3ecc2027369749716980716de7be972f9
2024-03-25 15:29:19 +08:00
19d8ed601d
NEW: add filament Bambu PLA Galaxy
...
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I454e1353a0328dc0ddae15eddd1b3ee46a5013e4
2024-03-25 15:29:19 +08:00
9ceb622d4c
ENH: update A1,A1 mini machine gcode
...
1. Update A1 machine gcode.Add multiple layers head wrapping detection.
Avoid the issue of excessive load angle in G28 X.
2. Correct some spelling errors in A1 and A1 mini machine gcode
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia830d45842ed7797c89babd3f05c00abc5db0c4c
2024-03-25 15:29:19 +08:00
207e48ce86
NEW: add profiles for PLA dynamic
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ib7d8f9d374e5c8b3f7dabcf204669fbadbb4f4ab
2024-03-25 15:29:19 +08:00
f2fc7155ae
ENH: update petg max_volumetric_speed
...
1.Update filament_max_volumetric_speed in PETG of A1
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ibcb2042040ca5719fd6fd92c73b84e3ed6ad5d60
2024-03-25 15:29:19 +08:00
c0c5171e44
ENH: update X1E start gcode
...
1. Optimize chamber cooling in X1E
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I541b22d8f59a4d1912bf54983fa3ab850ac63f5c
2024-03-25 15:29:19 +08:00
a6bd0f26ed
ENH: add some missing params in profiles
...
1. Add "filament_is_support" and "required_nozzle_hrc" in 3rd party
printer profiles
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I914ca26ef093b011164214beb29e797f88eb274a
2024-03-25 10:42:29 +08:00
fcb881350f
ENH: update PETG nozzle_temperature_range
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Iac58057353f87bda424c5e8914c65f80f72a97b2
2024-03-25 10:42:29 +08:00
b55bffabb8
ENH: modify elefant foot compensation
...
1. Set elefant foot compensation in A1 to 0.075
2. Add some missing params
Github:#2621
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I064d5e0b23297fd6491af8b97bad0790b077120d
2024-03-25 10:42:29 +08:00
5491fe54d6
ENH: update A1 series GCode
...
1. Upadte A1 mini timelapse gcode,remove unnessary move
2. Update A1 start gcode, adjust extrusion fluctuation extrusion pos
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I51e71314030cdeee38983adf84b50c9d2e14822c
2024-03-25 10:42:29 +08:00
8de8f84c96
ENH: add high quality process profiles
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I86ccf9d140f7de1fd4461477f90461fa161be900
2024-03-25 10:42:29 +08:00
c6bac98077
ENH: modify 3rd party filament profiles
...
1.Modify 0.2 nozzle PLA params
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: If74ba94e4a31a389c40d53011e77263e1963a21c
2024-03-25 10:42:29 +08:00
b09e99c8fe
ENH: update A1 series end gcode
...
1. Do not close Exis motor
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ibea64e4c4f83727a9731d0581a7a8536784ca4c6
2024-03-25 10:42:29 +08:00
ee583ee964
ENH: set elefant_foot_compenstation
...
1.Set elefant_foot_compenstation to 0.15 for X and P series
2.Set elefant_foot_compenstation to 0 for A1 series
github:#2621
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I199ca9e37ea1b3f7087fbef4166b0d90acfaedc3
2024-03-25 10:42:29 +08:00
22726c77d0
ENH: update A1 series start gcode
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I917710dae0371ae38d01713ca1a714e27e463623
2024-03-25 10:42:29 +08:00
2530846806
NEW: add nozzle height preset to machines
...
Jira: request from 1.9
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ida5372c0890043852ff94eac54b813f6618317df
(cherry picked from commit dad0768e0316423841f24e02c61eaf7d0b468f38)
2024-03-25 10:42:29 +08:00
a037d28da3
ENH: modify some profiles
...
1. Update A1 series change filament gcode
2. Remove filename format in Troodon
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I8f82595dc16a1402fcbc16a08cd52c8c7d62f14c
2024-03-25 10:42:29 +08:00
92a0baa64c
ENH: add PETG Translucent
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I6c86128feabe82aa5c3bf2d17c88e5675de9e792
2024-03-25 10:42:29 +08:00
dcbeb1baf7
ENH: add support for Troodon 2.0
...
The profiles are cherry-picked from orca 951293c6426e51d5f402.
and rename the filament profiles.Thanks Orca
github: 2335
Change-Id: I57a6e93aeef498439ebb8e95bb587dc9e2ab3496
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
2024-03-25 10:42:29 +08:00
1cea12e130
ENH: update some filament settings
...
1. Update retract length in Bambu TPU 95A HF
2. Update slow_down_layer_time for PETG
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ic5e6a76b5254459d8aff5128f289b5116c50ea75
2024-03-25 10:42:29 +08:00
cb466f542a
FIX: mistake in compatible printers
...
GITHUB: #3175
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I50f84ac9f933b80df4a1c894afac9895f31721f6
2024-03-25 10:42:29 +08:00
f81ba71aa5
ENH: revert "c80ad56f5e386687b7975918cec"
...
Also update profile version
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I3b28eb5daa2a0f4c7a37b4d99050d6f465f43c30
2024-03-25 10:42:29 +08:00
e2248be2cf
ENH: revert time lapse gcode in A1 mini
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ibf6bd15223a6a333d8544b53a69cc7128fbea534
2024-03-25 10:42:29 +08:00
7fb65174c4
ENH: update A1 extruder clearance radius
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I13cfb882c672083dcd1af2c1be448c5422fdbc0a
2023-12-14 22:08:53 +08:00
b80fdfa26c
FIX: remove duplicated profiles
...
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Iaa87233ae6c327faf43a152bdb0cd6fa8c5131d7
2023-12-14 22:08:53 +08:00
b83812819f
ENH: update A1 series first layer speed
...
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I597bcf86f202f681eccfda4306be5619d669ea5a
2023-12-14 22:08:53 +08:00
c8009d2ecf
FIX: incorrect flag in A1 mini gcode
...
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If587678bf0aa06c079a9d3cbff9f2c7628c5e380
2023-12-14 22:08:53 +08:00
5c4945d7e8
NEW:add "default_bed_type"
...
Jira: STUDIO-5535
Change-Id: Ice1262937923b62854b0196229d5fb99392470af
2023-12-14 22:08:53 +08:00
b44004c9ca
ENH: udpate A1 series gcode
...
1. Update A1 mini change layer gcode
2. Update A1 start gcode
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I131676a991f4727bca1ea2fa727f40f293d06139
2023-12-14 22:08:53 +08:00
82f95fb995
ENH: rearrange machine pos on printer selection page
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Iccc52043c232d19384487884e4071343744976a9
2023-12-14 22:08:53 +08:00
2d0038e144
FIX: wrong initial layer height in profile
...
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I91f1779761a13f70d68ad51041b7f75ef872c138
2023-12-14 22:08:53 +08:00
Leon Fisher-Skipper
XunZhangBambu
Arthur
wenjie.guo
YGK3D
zhou.xu
qing.zhang