da32b878b3
ENH: add extruder_ams_count behavior
...
1. save to appconfig and project setting
2. use it to group
jira: none
Change-Id: Id4048fc1b47f6904b2e9c0154aaa3a2b03590437
2025-03-22 20:32:27 +08:00
3179fd416e
ENH: config: add logic to apply params to object/region config with multi-extruder
...
JIRA: no-jira
Change-Id: Ieab98cd8d031e5ca82a3aad2d0b89d8ae4a794f1
2025-03-22 20:32:26 +08:00
0434853bf3
ENH: config: remove unused custome_defined logic
...
also improve project_embedded
1. remove unused is_custom_defined
2. improve project_embedded to support multi-extruder diff
jira: no-jira
Change-Id: I1db28c3cfd59ccc31c6855af30305396c71c4e9a
2025-03-22 20:32:26 +08:00
f1b0805ed1
FIX: wrong flush logic
...
1.Fix flush calc logic
2.Rename m_extruder in GCodeWriter
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I38f023fbad983305632ca62cbfb3909759013c25
2025-03-22 20:32:25 +08:00
7b7ebf1b95
ENH: config: add the extruder variant apply logic in Print::Apply()
...
we need to keep the original values and update after pre-slice
jira: no-jira
Change-Id: I232d3c43340b4a23bc42121bd05380746e736f20
2025-03-22 20:32:25 +08:00
603f93d97f
ENH: config: add nill load/save logic for user config
...
Change-Id: I8da6c5b345cc088862f2c720aeb742b9617ff3e7
2025-03-22 20:31:45 +08:00
3c32b2c5a6
ENH: enable params with silent mode
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id46fa5de3a58e0fd3c3b0aa28524a03ca9a38f1a
2025-03-22 20:31:45 +08:00
5defd2b7c3
ENH: config: add extrudrer variant check logic
...
when load config from 3mf
Change-Id: I946ba777853e479418fcd1b49209f75ed41f33f3
2025-03-22 20:31:44 +08:00
dcd9fd5013
FIX: backend get the extruder id based on filament_map
...
Change-Id: Ib7679c0fc67336e462467dab9f5b4d4684d6eb19
2025-03-22 20:31:44 +08:00
366a14d8f7
FIX: parameters modify of printer preset
...
Ensure correct behavior when modifying parameters of printer preset
Change-Id: Ic627a8e202bf4224b742336cc43ac611ddc5c997
2025-03-22 20:31:43 +08:00
e770043c4d
ENH: add stride in get_index_for_extruder
...
JIRA: no-jira
Change-Id: If529296bf6d35edc35aee3ff497184dce70332d1
2025-03-22 20:31:43 +08:00
bbc4d701bf
ENH: add check logic of filament_map when Print::Apply
...
Change-Id: Ibab353c4b16183611d63d75bcdf5f370cb578f21
2025-03-22 20:31:43 +08:00
e9081ba8d4
ENH: filament: delete filament_extruder_id related logic
...
jira: no jira
Change-Id: Ie0d8e31a6a3eef0400b3ba6238f817bad4daca24
2025-03-22 20:31:43 +08:00
5b0d525957
ENH: Display and modification of printer presets
...
Change-Id: I6a38704864fd4994a845686a299bec67f1b9b9b3
2025-03-22 20:31:43 +08:00
b0e3ab037e
ENH: config: add filament_maps in partplate
...
Change-Id: I1183830788e703f1d33a8a4b620b58b822283dd4
2025-03-22 20:31:43 +08:00
6fbad9ed33
ENH: flush_volume support multi_extruder and fix bug
...
Change-Id: Id6b041f71ee6e55e68a6937f24ce791caac8e708
2025-03-22 20:31:42 +08:00
8b2544df41
FIX: Use the same api to get the extruder id
...
jira: none
Change-Id: I05b3040b176374deee3e95bc52364fe7b33bb257
2025-03-22 20:31:42 +08:00
03058ba29d
NEW: config: add logic in config system to support multiple extruder
...
1. add nozzle_volume_type
2. add extruder_variant_list
3. add printer_extruder_variant,print_extruder_variant, filament_extruder_variant
4. construct backend fullprintconfig
Change-Id: I50659634e2cde363112ff5ded6c199d7548c6f2f
2025-03-22 20:31:42 +08:00
6b09cfee71
FIX: modify parameter type of process preset
...
jira: none
Change-Id: I5c973a29e5b983e3f480d55aeeb2b14d13e950ee
2025-03-22 20:30:22 +08:00
2eace660e8
ENH: add limit for smooth_coefficient
...
Jira: 10274
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9e288de79b38af6baf93263ccbb452c8996430ba
2025-02-18 17:19:01 +08:00
710935293b
FIX: config: remove src/libslic3r/PrintConfig.cpp in ignore list
...
jira: no-jira
Change-Id: I03c37f33fc6ae0f4d7fdb9c18d52c501d0f7fad6
2025-01-09 19:32:26 +08:00
ba07c4e5d7
Fixed tooltip for cool plate initial layer temp.
2024-11-19 15:44:18 +08:00
bf59a28361
Fix typo: wip action -> wipe action
2024-11-18 08:32:51 +08:00
ff02a5e2ac
ENH: update param name
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ibb2cc4316fd4ff9b7b1d071544567971d0ad9004
2024-11-12 15:35:32 +08:00
68807ca3ee
ENH: correct tooltip of distance to rod
...
jira: none
Change-Id: Iad8fc7168e1f19883ab8fe793e8025f1b81da205
2024-11-12 15:35:32 +08:00
4d4883953d
FIX: adjust plate type eume
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If5bab050cc4d243d1ac414b91d1b6e10fa95dad2
2024-11-12 15:35:32 +08:00
1656cf084b
FIX: simple way to avoid collision of seq printing
...
A simple way to avoid collision of seq printing by object of A1 series
printers, at the cost of reduced area of sequential printing.
Add new option extruder_clearance_dist_to_rod.
jira: STUDIO-8137
Change-Id: I033220e090b071c76f5c5be0d0b471e428d807ec
2024-11-12 15:35:32 +08:00
7697eb3dc8
ENH: improve tree supports
...
1. speedup organic tree support by using parallel for intersection of bed area
jira: STUDIO-8451
2. add extra wall for hybrid tree support's tall branches
3. disable circle fitting for tree support. This feature produces inconsistent
circles for tree supports.
4. expose the option tree_support_branch_diameter_angle. Tree supports'
strength can be improved by increasing this value.
Change-Id: If3688ca895df98a77f6ca538077daf8fe94e53f1
2024-10-28 20:51:35 +08:00
63be8a61fb
ENH: filamet shrinkage
...
Github: 2769
This feature ported from superslicer
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic92d248aa90222e6f74530f01876cc14944f2444
2024-10-28 20:51:35 +08:00
7907894c8d
FIX: mistake spelling in tooltip
...
jira:8371
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If51ecd6cb6299bcb42ffbcea1f8b2f2bfc511460
2024-10-15 15:50:26 +08:00
fe5ebf0614
FIX: brim gizmo closes the program without prompting dialog
...
jira: STUDIO-8383
Change-Id: I7e83d19768be754ef79f0063d76624358bba5102
2024-10-15 15:50:26 +08:00
e835122054
FIX: Support ABS recognized as ABS
...
jira: 7685,8151,8323
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0a4cce12663ee8f62309f0828521364874a7638d
2024-10-15 15:50:26 +08:00
83b6a9ab92
ENH: set scarf angle threshold to 155
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8e8f74761a42c0f110116628f63b3ca813c18638
2024-10-15 15:50:26 +08:00
34fb47a618
FIX:fix brim ear bugs
...
1.[STUDIO-8385] Fix switch to split tool crash;
2.[STUDIO-8406]brim ears only works in manual mode;
2.[STUDIO-8410] Disable brim width modification when brim type is manual;
3.[STUDIO-8382] Warning message not cleared;
4.[STUDIO-8239] Translation issues;
5.[STUDIO-8380]Disable brim ears for non-part models
6.[STUDIO-8285]Clicking the delete brim button did not recalculate;
jira: details
Change-Id: Id333179236d6b6f23de5081bd9b8d94b08c7dd62
2024-10-15 15:50:26 +08:00
14eb79ab9a
ENH: add some missing filament types
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6d5b8f7a3c2eb26950bf39694023903ddbc47088
2024-10-15 15:50:26 +08:00
9e313d5d48
ENH: add tool tips for filament scarf seam params
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic5c5ae94725d994562a9efbaf5da924204e3b955
2024-10-15 15:50:26 +08:00
f1d774f6c0
ENH: apply filament scarf seam
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia565da8d280c0f7e51097f1d601240376c1e380e
2024-10-15 15:50:26 +08:00
872978d61b
ENH: Revert z smoothing function
...
Jira: none
Change-Id: I067033c3beb4b29b8da11ff0c9f12b126bcf61dc
2024-10-15 15:50:26 +08:00
e81c3a735d
ENH: enable to edit extruder offset
...
1.enable to edit extruder offset in developer mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If1a9cf0884effd1efa6cbef413efa9f65b798174
2024-10-15 15:50:26 +08:00
28fee5f65a
ENH: not apply z speed smooth on arachne
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I6821d79bad47326a46d3cfa265184c6114493f74
2024-10-15 15:50:26 +08:00
78572cbff8
ENH: add supertrack plate
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I89017c9933597ee035aa20ba3852db6f629f5e20
2024-10-15 15:50:26 +08:00
a557bbe758
ENH: precise tree support wall count
...
Change the behavior of "tree support wall count" option, let it control precisely.
0 means auto.
jira: STUDIO-8068
github: 4780
Change-Id: I6d1a64cff9b121f5c0a3e910c5ddbfe6db198687
2024-10-15 15:50:26 +08:00
92c85a13d0
NEW: add brim ear gizmo
...
jira: STUDIO-7378
Change-Id: Ib6b5dbd3b113981612b05e01e59f62054ff0b654
(cherry picked from commit 37120830a2f958f464719db1f5d0180882bc4095)
2024-10-15 15:50:26 +08:00
b52a9de509
ENH: smooth z dir speed and layer time
...
Jira: none
generate continuitious outer wall speed in z dir
generate continuitious layer time in z dir
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0ade543d2f9ee40f5cd65c533eb261d85e5eaa34
2024-10-15 15:50:26 +08:00
04756bf447
FIX: support wall count doesn't work
...
jira: STUDIO-7975
Change-Id: Ic580d298568fc6eab8b1a2c017fa182869b432bf
(cherry picked from commit 82bcb099e139065cc00c133f507e955d9955b2f4)
2024-10-15 15:50:26 +08:00
0cfa60b657
FIX: config: fix a endless loop issue when replace string
...
jira: STUDIO-7545
Change-Id: I7ea06556142242f44b183599d9d23d063ad509f9
(cherry picked from commit 842e238d6265abb34f33614c255d1292c3345c34)
2024-10-15 15:50:26 +08:00
47139ad690
ENH: add tpu-ams type
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I98c1c8a1e214b2fcb6b51857e6da3716b7aa04f8
2024-10-15 15:50:26 +08:00
379238772e
FIX: crash for ironing spacing out of range
...
Jira: 7570
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic2b07f7e1cb2534cbe356a294d450d05f8b31cbe
2024-10-15 15:50:26 +08:00
4b23b42b22
ENH: ironing inset
...
Jira: 7391
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I2233b267ad7e3eb22ed9c232a89b7679173c7b34
2024-10-15 15:50:26 +08:00
af7f87c238
ENH: add option to decide if overhang join cooling
...
Jira: 7414
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I223c8b72d025947652a1f36c31c1a0adc3c9d180
2024-10-15 15:50:26 +08:00
zhimin.zeng
lane.wei
xun.zhang
qing.zhang
Shane Qi
James Stanley
Arthur
Mack