Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
When travel in x-y-z move, the acceleration should
be limited by trivector rather than one axis.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If8e5d394cf5d8772d324b9c851c047d9235d9b6b
Add paint-on support on vertical faces of slender rods
ENH STUDIO-970/1285
FIX STUDIO-1183
Change-Id: I36b398f9c1c1341bce080ec3d454dcc6e6f991e8
(cherry picked from commit 65ee2c8d74284b21bfd34a1059e2005998d749c5)
Always draw a wall before infill for 1st interface.
Jira: STUDIO-1402
Change-Id: I9cba46f9bcacbe6c78a82bbb7099cc1d1182cb97
(cherry picked from commit d7381adb78c99414f538db82f0ac1f2de2e968cf)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
1. use face_normals as convex_hull normals instead of quantized normals.
2. The quantized normals will result in bad orientation because of accumulated error.
Change-Id: I8e554905dcec430738135cb8a9f08d8e0fdfecae
(cherry picked from commit 33c474f6f6e7469aed75e981e700e0279cb23de3)
[STUDIO-1079] Large plane not stick to bed
[STUDIO-1437] Model auto flipping bug
1. Changed the orientation threshold so that some tiny rotations wont be ignored.
2. Added flipping detection. Rotation with same unprintability will not be excuted.
3. Added the weight of first layer area to improve large planar face orientatio performance while not influence other objects with small first layer areas.
Change-Id: I1efc9252c90bc053e65cb71e7770cb8d0305cb6e
(cherry picked from commit 1eda67e4fd0cd2536af219e0c225fc08949b5023)
1. change default bed_type to "1" in app_config
2. if old app_config.bed_type is 0, change it to 1
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I9923187ab480b0a4991bfbc13892bfb43b2a990b
support_critical_regions_only may generate wrong supports on sharp tails
Test case: calicat.stl
Change-Id: I73671d9bf0f9c27ef70efa5765cd291761c4d18d
(cherry picked from commit 8ff2ac7ce437dc2f9eee6068d596294c054dee1b)
1. Should start from bottom left if there is excluded regions
2. avoid exclusion regions in fixed_overfit_topright_sliding
Jira: STUDIO-1422
Change-Id: If88ecf86a0485bd478a77df8cfd4942df8ca27ac
(cherry picked from commit a8393de51bd178b731ef4c7201a5fe3247d97a1f)
Add default type to plate bed types.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I26f3a64dba4a19b0d882b828f1ee54c84df1879c
(cherry picked from commit 1ebed465d2b3bcd482dd4ba7a5930b721c79fc13)
if the brim of an object exceeds the bed area, it will be clipped before transformed to G-Codes
Change-Id: I68d700a85e1d28a5e337e53d614266f6e5e0a653
(cherry picked from commit d19ffaa7bdf4b0ab750119d9ef6252491d936f3e)
1. improve auto-arrange compactness around wipe tower
2. do not show "Avoid extrusion calibration region" for P1P
3. encourage objects with similar height to be arranged together
Jira: STUDIO-1364
Change-Id: I5efa61a676c453618cdb3915fb98928d07138deb
(cherry picked from commit 571ee0c6d91d8a5f6a60838052f09d49d85f12ed)
The tolerance of orientation filter is too large.
Jira: STUDIO-1375,1376,1382
Change-Id: I794a161e74acbcf2e13c03dcc6e5e51d6b4e1f23
(cherry picked from commit 9d8f838fb06b8c0d4efed3e50d33db410efae360)
Wipe tower is needed if support base and interface use different materials.
Jira: STUDIO-1336
Change-Id: I006ece952aac1a0f0a57721c2cd1b52b2ceee28a
(cherry picked from commit 1a387e4b1607dee36f5abe499892f027e244fbeb)
1. only show label of object in current partplate
2. disable label under gizmo
3. fix a issue of label not updated in time
4. add some logs
Change-Id: If20196a566cc45a4a0c2bcc6bbe212aaa9f74dd3
(cherry picked from commit 3e92ed61e9687d5351a9bb2bc6d25b568cd1c973)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
1. parallel load object files
2. only load object used by some plate(cli)
3. improve the loading speed when generate objects by using reference
Change-Id: I2719651e715f2e35326e760c4b7cdb3114f54992
I improve the cost function to align big item better.
JIRA: https://jira.bambooolab.com/browse/STUDIO-1221
Change-Id: Id5a16c127ec51bf7463e331058cb1a8f78b764ca
(cherry picked from commit 39773a901df82081c7d9d089807a52aa09e6a498)
if the region is top surface as well as bridge
use bridge path
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia23910e4c49daeacf12d2f40d21a7ca319ddcfb7
1. support bed_type for each plate in CLI
2. don't render the calibration thumbnail under CLI
3. fix the plate box not generated issue
4. refine the slice_all button's status logic: from all slicable to one slicable
5. fix serveral issues in multiple plate's switch and slicing
Change-Id: I6193a799da0367068169ce315d1fcc9098357fd1
1.recalculate layout of filament page
2.add fan speed and temperature page
3.fix that value of time and percent too small to display correctly
Change-Id: I5d0cfaea03aa6e9286fe2d7243de7dd413fe7982
when support material is used in first tool change
Change-Id: If06459b8404fd599b42187859f476efded57deba
(cherry picked from commit 71f9ed69a3eff4cf3139d04a76176f798a1e1e0d)
Add (manual) to normal and tree for better understanding.
Change-Id: I6d39764a16510707912dfdeb80787d63a6e5ad96
(cherry picked from commit 46a0e9a1bb5da747f7d8c90a9235ae59ddf68bc4)
Add back even-odd mode to support slicing 3DLabPrint
airplane models
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
1. return error when there is object partly inside the plate;
2. add the status callback for progress indicating
3. add the version in help
4. fix the return state of validation from 1 to -51
Change-Id: I716057bd5b28a4beb2871614b94708a0860af1a2
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
the print object updating is behind the .normalize_fdm
which will cause some issue in corner cases
Change-Id: I57e9e7aa2acff81b89aedd95ffc7a7effb76cc6b
1. reduce expansion of exclusion regions
2. expand extrusion calib regions to let them touch bed boundary, to
greately simplify auto-arranging with avoidance option on
3. improve dist_for_BOTTOM_LEFT to allow objects be put left to
exclusion regions temporarily
4. improve on_preload for better handling objects around exclusion regions.
5. improve debug tools
6. fix a bug with wipe tower estimation (don't estimate if wipe tower is
explicitly disabled)
7. use larger y-overlap threshold to estimate rod height confliction
better in per-object print ordering (now we use half the clearance
radius)
Change-Id: Iab29d47a072d8515f28a09855432f92fcffa8c5f
(cherry picked from commit 3a4f242a3a6fd2f82dcc8306cde4d1cb107a5099)
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.
This is handling for github issue #340
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
When fuzzy skin is enabled, show more related settings
so that user can tune.
This is enhancement for github issue #44
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I35e3883983b62117c4306dd894a04edd40c70f8e
We discover a good quaility interface can help remove support. When
enabling interface, directly generating circles from overhang polygons
gives fairly good quality.
Change-Id: I5d347fa7abaacea839650b6fd3a8c2c73abd5e56
(cherry picked from commit 474cbf7d59beda63e9ef1ec8b52636f2674811c7)
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Some sentenses are only slightly different which is
unnecessary. Making them the same can save a
translation and also keep consistency.
Change-Id: Ie59c0bf788a31ee0c6a0d792af7b3d532fe34f75
(cherry picked from commit eb69195569518e3be61e5a8887ea317fbe3e7302)
The first layer order should be outer wall first,
when the object indeed has brim.
So must regenerate wall when switch to manual brim.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I44fd0686b7a0e836337f5e6ff8ee311ea0c7bceb
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
lane.wei
zhimin.zeng
qing.zhang
MusangKing
liz.li
salt.wei
Arthur
shuai.liu
yifan.wu
chunmao.guo
tao wang
wintergua
Stone Li
miaoxin