when support material is used in first tool change
Change-Id: If06459b8404fd599b42187859f476efded57deba
(cherry picked from commit 71f9ed69a3eff4cf3139d04a76176f798a1e1e0d)
Add (manual) to normal and tree for better understanding.
Change-Id: I6d39764a16510707912dfdeb80787d63a6e5ad96
(cherry picked from commit 46a0e9a1bb5da747f7d8c90a9235ae59ddf68bc4)
Add back even-odd mode to support slicing 3DLabPrint
airplane models
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
1. return error when there is object partly inside the plate;
2. add the status callback for progress indicating
3. add the version in help
4. fix the return state of validation from 1 to -51
Change-Id: I716057bd5b28a4beb2871614b94708a0860af1a2
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
the print object updating is behind the .normalize_fdm
which will cause some issue in corner cases
Change-Id: I57e9e7aa2acff81b89aedd95ffc7a7effb76cc6b
1. reduce expansion of exclusion regions
2. expand extrusion calib regions to let them touch bed boundary, to
greately simplify auto-arranging with avoidance option on
3. improve dist_for_BOTTOM_LEFT to allow objects be put left to
exclusion regions temporarily
4. improve on_preload for better handling objects around exclusion regions.
5. improve debug tools
6. fix a bug with wipe tower estimation (don't estimate if wipe tower is
explicitly disabled)
7. use larger y-overlap threshold to estimate rod height confliction
better in per-object print ordering (now we use half the clearance
radius)
Change-Id: Iab29d47a072d8515f28a09855432f92fcffa8c5f
(cherry picked from commit 3a4f242a3a6fd2f82dcc8306cde4d1cb107a5099)
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.
This is handling for github issue #340
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
When fuzzy skin is enabled, show more related settings
so that user can tune.
This is enhancement for github issue #44
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I35e3883983b62117c4306dd894a04edd40c70f8e
We discover a good quaility interface can help remove support. When
enabling interface, directly generating circles from overhang polygons
gives fairly good quality.
Change-Id: I5d347fa7abaacea839650b6fd3a8c2c73abd5e56
(cherry picked from commit 474cbf7d59beda63e9ef1ec8b52636f2674811c7)
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Some sentenses are only slightly different which is
unnecessary. Making them the same can save a
translation and also keep consistency.
Change-Id: Ie59c0bf788a31ee0c6a0d792af7b3d532fe34f75
(cherry picked from commit eb69195569518e3be61e5a8887ea317fbe3e7302)
The first layer order should be outer wall first,
when the object indeed has brim.
So must regenerate wall when switch to manual brim.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I44fd0686b7a0e836337f5e6ff8ee311ea0c7bceb
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
This reverts commit ccf1746530a6f68d38a9b6714e70a0acdbec5b8c.
Reason for revert: multi color printing has problem
Change-Id: Ibc53b99a715b987ee447d7c3b03407de2790abaf
Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
This may cause tall objects be printed before short ones. There are two
possible solutions:
1. do strict ordering only when y-overlap is large enough (the one
chosen in this commit)
2. when considering vertical collision with rod, the actual expansion
can be much smaller (because the rod is only slightly off extruder).
But this solution requires an extra parameter. Let's hold it for a
while.
Change-Id: Icc9a4796d49dad93cbcc20d4103e641a48886e5e
(cherry picked from commit 6a958b1fa9e58e4ca3be63b4918da77bcdc53314)
(cherry picked from commit ceff67789c27ea576afd663a2e5bae9a10241728)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
The original patch can't fix empty layer issue
Revert.
This reverts commit 152a650fb80a84523e977b15f5f30d28837d80e9.
Change-Id: Ib6d47ac981fca24ca953b45068703bbcd231cf95
Copied objects share extrusion paths but they should be treated
seperately.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I891c70d261a2fa5b198ec776694d74eeb8fd987f
Revert "ENH: save uniform scale to an app_config item" Revert "ENH: do uniform scale if uniform_scale is true"
Change-Id: I069baecec143e77d796247f29cd5478b877971fb
(cherry picked from commit c7cf95cf5c365f314a53fead6612fac84a0a5f71)
This is a bug when printing multi filament
When the filament changing is finished before printing
first layer, the temperature should be resumed to be
initial layer nozzle temperature as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82231f8a47fac1995d8f1ba12c4f7797afce2891
Copied objects share extrusion paths but they should be treated
seperately.
Thanks hisptoot for the fix.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I24d3050df7d284e92fc50a0213023a43ee8c529c
Add paint-on support on vertical faces of slender rods
Jira: Studio/STIDIO-970
Change-Id: If280b570a8076059b5583f385ba6517bf305723b
(cherry picked from commit 6832ee98ac146421c061fa90840c2751c3b3d875)
Root cause:
support_floor_layers_above is not properly set,
so adjust_layer_height() fails to detect extremes,
and then deletes the middle layers.
Also reduce max_bridge_length to 10mm.
Jira: STUDIO-1084
Change-Id: I1e72a0600ec7e2b812705e45b47b76189152daac
1. fix the prefer_model issue
2. when a printer is visible and no filament is selected, just set its default materials to visible
3. add some log for shutdown debug
Change-Id: I599dbd9c8b180c944ff4086c7638267ff002f94a
1. create user folder if not exists
2. add a tips for binding a printer
3. fix sdcard tips
4. modify icons
5. refine layout of task options
Change-Id: Ic0529cf1e8bdde0128052bc42454f6e6aaae87ca
Signed-off-by: Stone Li <stone.li@bambulab.com>
Add bed temperature checker in gcode processer. And
save slice warning into GcodeProcessorResult.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iee96e4ab165a3171a5a1e165450bfc360401647f
now we save volume's matrix seperately,
so we don't need to adjust the vertex order anymore while saving to 3mf
Change-Id: I71b865c44f0d99e2e88e34cd253fcfba583f345c
empty region after adding the modifier cube
this fix for STUDIO-1025
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5ed35b54f8ee9d2fdc387d1b4391021e4e82aaad
Provide related two options to avoid crossing wall
when travel.
This is handling for github issue #106
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I127adbb70f33c3954a08f3087e64c4e75212c7f0
Lighting infill has not been enabled on this branch.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3c8d1f57fd36e73eaec190a43bf9f5868667d9b
Add custom gcode back, which can be inserted in
gcode viewer layer slider.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
Sync some code change and fix from Prusa.
Thanks Prusa.
This also can fix github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If6993e0149733ccf85ed85f82553caa03df7ac60
Thanks SoftForever for your works to support
sending a gcode file to third-party printer
Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>
During filament changing, additional cooling fan may
be closed to reduce strings. Force to resume after
changing filament.
This logic is same with part cooling fan.
So no side effect.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I207c8692dbe5b0450ed0a3d11c4c9b70eda0e28c
Too large margin for bridge will cause overflow for
shell model. But too small margin for top/bottom will
cause infill area discontinuous.
Using different margin for top/bottom and bridge to
make a balance.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9ba8388b85b978ae39caf2df04f96c704b5d2e05
As title. Make calibration to use printing acceleration,
although no-using has no influence on calibration.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I98cb791c1e0fba6b77360b60567c29511cff75b8
When the model has no overhang, user may disable overhang
slowing down.
In this case, it's unnecessary to calculate overhang
degree which make slicing slow when model is complex.
This is improvement for github issue #331.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2eaeca3ee4068f76709fe97535bbf05c0d27c062
1. hybrid(auto) on_buildplate_only option not working correctly because
parent is not set.
2. tree(auto) on_buildplate_only not working correctly because unsupported
branch isn't deleted completely. I add child to track the dangling nodes
and then delete nodes with no child.
Change-Id: I24c69a7cf400d2961b22a720a6069cf95db6c1a5
(cherry picked from commit bce77c16128d35c668b175e7135b9fe9acd71d13)
Find some problem for the change of bridge, revert.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib195a9b4425fa54408bcd3842bbafc41a3c79409
1 move thick bridge from support to quality page
2 Fix the issue that some times the external bridge angle
is not the best, and the bridge line is not the shortest one.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie26570fb289898f6b62960f9333e79aa92c08ae4
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
This is fix for crash issue for some specific step
file, which generate empty mesh.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910e3d2da670b623570665265a12361492bd706b
1.show flush of every filament
2.modify first-layer text display
3.show time in seconds when time cost < 1h
4.forbid add-filament when print by-object
Change-Id: Ib8a94b9f620797e367bfc9e8a33abd5d7ab648ec
Enable arachne for concentric pattern by
referring to PrusaSlicer
Also remove useless pattern we added.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie2574f7fc4751ebdf1caab4de52013f3101e104f
This is fix for github issue #216 that
sometimes the infill layer is empty.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie3be08b75506e48f5ae9dd6aae2ae729ba666e01
the max length of linux's thread name could only be 16 bytes
bambustudio_main can not be set by pthread_setname_np
Change-Id: Idab83896c81787b32f6a4dde869b101da1d69e5c
add tips when both print by object and smooth mode are selected
Change-Id: I13f4cc14f2ff7c33c23dcd1708fdb784aef5afa3
(cherry picked from commit a0bfe48df21d4eecf105d41387838f14b22fff3c)
Fix the issue that the first 2 layers of prime tower are not generated
when timelapse is set to smooth mode. This issue only happens in single
filament printing.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
All extruder offset should be extruder_offset[0] when
it is single extruder multi material.
Add handling when load config from gcode.
This is fix for github issue #213
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia881b2bfbbdffa98e3c3db7b35201dc86b520b29
keep only one repeated opt_key when old software open new 3mf file
Change-Id: I4f35d2f15e0cb9e5fa4a7523cfcba7b601afd795
(cherry picked from commit a25c42f31437b4562b8fe71a836a421c014c6cf9)
1. memory explosion when enable timelapse.
2. Models with only one color become multicolor after slicing.
Change-Id: Iab3ace70c08d03ab612158d52ff67eef8d5bc718
In current studio, a brim area will be ignored if it does not be connected to any object island.
After patching, a brim area will be ignored if it does not connected to any object island and other brim areas.
Change-Id: I1aef5cd1af12cf76746f7614807aa03956d625ad
1. unsupported sharp tails and large overhang have different messages
2. do not popup warning for total area (only warning for one single
large overhang)
Change-Id: I153e559915a92c6676468539cf619dafe915f997
(cherry picked from commit 67b593150f8de847d9b1999bf0d7a549eb1ef154)
1. fix a crash when loading a 3mf painting with color idx larger than 15
2. fix the facets not display issue if painted with color 15
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Idb53b6bb2d3665412815222ab9a1d47948afed56
1. fix sequential printing tall objects. Now the print order is not determined by auto-arrange,
so wee need to add a new rule: lower objects should not exceed height_to_rod.
2. sequential printing is better centered.
Change-Id: Ic320722654f0335d2589060fa14c71a5aaa3f571
ConcentricGapFill pattern was used for internal narrow
solid infill. Use arachne engine instead to remove
gap fill inside the pattern and improve the extrusion path
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I758d7c72eb71cc37026b7cebf746cc345014c3f5
(cherry picked from commit 0b6bacd21a091afc13d7b36a69e5b10f155bc6f8)
display hms msg in HMS tab of Monitor
Change-Id: I4df1c63b104463ba62cdf7eb079a540a4176f8c5
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit f4635d18f3383e70177536dfbe5edf2e1370b746)
filament_max_volumetric may be 0 which cause zero
flushing speed. Add protection for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I866b9d97c9c6d97122a4a2beaf508ce9c72ee3b2
Requirement from user to set filament_start_gcode
and filament_end_gcode. Set these two settings to
advanced mode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0d8ddb394b37614d0ef0f10f8434553cb20e9ffd
In auto brim mode, first layer of common support may be apart from object island, which is controled by support object distance.
if support object distance is lower than "flow width + brim_object_gap", the brim will not work.
Therefore, if first layer of common support is interesected with object island, the distance will be brim_object_gap in auto brim mode.
Change-Id: Icbb98af8fd9e84e3ac1977794ca2b60629dd53dd
1) if an object has a slender footprint but its height is small, brim will not be generated;
2) two volumes are treated as intersected if their distance is larger than 0.3mm, instead of 0.8mm.
Change-Id: Iaf7ab644ba9bcc1a8d404acd455f1d8b57e1eb91
0. disable arranging selected
1. fix bug where brim is not correct.
2. fix bug where big circle objects are not arranged properly
3. disable default enable_rotation
Change-Id: Ifc69f35d900ff63ec1e9ec8bf8638afc6ea7d54b
(cherry picked from commit 2ed1b0dd8573a1e10aaf77f0d9f8896cef304427)
Disable the spacing adjustment by bounding box before
fixing, to avoid overflow in some cases.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I13c751c8d46040156d79c1fdfc513f22f5e40fe2
bbl cloud can not parse character '&’
use xml_escape to convert to xml format
Change-Id: I9a2c0abb3c80c26be6f3add507c133f72b2bf7d1
Signed-off-by: Stone Li <stone.li@bambulab.com>
when logout, if the preset selected is still there
we should not select it by force, which will cause the edited preset cleaned
Change-Id: I930cfcb04eae7473f6bc5f037d26b852013b6f42
Filament type of Bambu PA-CF in RFID is PA-CF.
Change it to PA-CF as well in preset to avoid
failure of AMS mapping.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic6b6269123d59863fea2b7d262a124468c95b8af
As title. User can delete the value to enable 256x256 printable
size
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia10454b7a7a1b28c04d8d41df9f3251875f6e74e
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
chunmao.guo
Stone Li
salt.wei
yifan.wu
zhimin.zeng
Arthur
liz.li
lane.wei
qing.zhang
猫山王
xiang.zeng
tao wang
SoftFever
wintergua
tao.jin
xiangdong.yang