Too large margin for bridge will cause overflow for
shell model. But too small margin for top/bottom will
cause infill area discontinuous.
Using different margin for top/bottom and bridge to
make a balance.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9ba8388b85b978ae39caf2df04f96c704b5d2e05
As title. Make calibration to use printing acceleration,
although no-using has no influence on calibration.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I98cb791c1e0fba6b77360b60567c29511cff75b8
When the model has no overhang, user may disable overhang
slowing down.
In this case, it's unnecessary to calculate overhang
degree which make slicing slow when model is complex.
This is improvement for github issue #331.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2eaeca3ee4068f76709fe97535bbf05c0d27c062
1. hybrid(auto) on_buildplate_only option not working correctly because
parent is not set.
2. tree(auto) on_buildplate_only not working correctly because unsupported
branch isn't deleted completely. I add child to track the dangling nodes
and then delete nodes with no child.
Change-Id: I24c69a7cf400d2961b22a720a6069cf95db6c1a5
(cherry picked from commit bce77c16128d35c668b175e7135b9fe9acd71d13)
Find some problem for the change of bridge, revert.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib195a9b4425fa54408bcd3842bbafc41a3c79409
1 move thick bridge from support to quality page
2 Fix the issue that some times the external bridge angle
is not the best, and the bridge line is not the shortest one.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie26570fb289898f6b62960f9333e79aa92c08ae4
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
This is fix for crash issue for some specific step
file, which generate empty mesh.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910e3d2da670b623570665265a12361492bd706b
1.show flush of every filament
2.modify first-layer text display
3.show time in seconds when time cost < 1h
4.forbid add-filament when print by-object
Change-Id: Ib8a94b9f620797e367bfc9e8a33abd5d7ab648ec
Enable arachne for concentric pattern by
referring to PrusaSlicer
Also remove useless pattern we added.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie2574f7fc4751ebdf1caab4de52013f3101e104f
This is fix for github issue #216 that
sometimes the infill layer is empty.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie3be08b75506e48f5ae9dd6aae2ae729ba666e01
the max length of linux's thread name could only be 16 bytes
bambustudio_main can not be set by pthread_setname_np
Change-Id: Idab83896c81787b32f6a4dde869b101da1d69e5c
add tips when both print by object and smooth mode are selected
Change-Id: I13f4cc14f2ff7c33c23dcd1708fdb784aef5afa3
(cherry picked from commit a0bfe48df21d4eecf105d41387838f14b22fff3c)
Fix the issue that the first 2 layers of prime tower are not generated
when timelapse is set to smooth mode. This issue only happens in single
filament printing.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
All extruder offset should be extruder_offset[0] when
it is single extruder multi material.
Add handling when load config from gcode.
This is fix for github issue #213
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia881b2bfbbdffa98e3c3db7b35201dc86b520b29
keep only one repeated opt_key when old software open new 3mf file
Change-Id: I4f35d2f15e0cb9e5fa4a7523cfcba7b601afd795
(cherry picked from commit a25c42f31437b4562b8fe71a836a421c014c6cf9)
1. memory explosion when enable timelapse.
2. Models with only one color become multicolor after slicing.
Change-Id: Iab3ace70c08d03ab612158d52ff67eef8d5bc718
In current studio, a brim area will be ignored if it does not be connected to any object island.
After patching, a brim area will be ignored if it does not connected to any object island and other brim areas.
Change-Id: I1aef5cd1af12cf76746f7614807aa03956d625ad
1. unsupported sharp tails and large overhang have different messages
2. do not popup warning for total area (only warning for one single
large overhang)
Change-Id: I153e559915a92c6676468539cf619dafe915f997
(cherry picked from commit 67b593150f8de847d9b1999bf0d7a549eb1ef154)
1. fix a crash when loading a 3mf painting with color idx larger than 15
2. fix the facets not display issue if painted with color 15
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Idb53b6bb2d3665412815222ab9a1d47948afed56
1. fix sequential printing tall objects. Now the print order is not determined by auto-arrange,
so wee need to add a new rule: lower objects should not exceed height_to_rod.
2. sequential printing is better centered.
Change-Id: Ic320722654f0335d2589060fa14c71a5aaa3f571
ConcentricGapFill pattern was used for internal narrow
solid infill. Use arachne engine instead to remove
gap fill inside the pattern and improve the extrusion path
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I758d7c72eb71cc37026b7cebf746cc345014c3f5
(cherry picked from commit 0b6bacd21a091afc13d7b36a69e5b10f155bc6f8)
display hms msg in HMS tab of Monitor
Change-Id: I4df1c63b104463ba62cdf7eb079a540a4176f8c5
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit f4635d18f3383e70177536dfbe5edf2e1370b746)
filament_max_volumetric may be 0 which cause zero
flushing speed. Add protection for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I866b9d97c9c6d97122a4a2beaf508ce9c72ee3b2
Requirement from user to set filament_start_gcode
and filament_end_gcode. Set these two settings to
advanced mode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0d8ddb394b37614d0ef0f10f8434553cb20e9ffd
In auto brim mode, first layer of common support may be apart from object island, which is controled by support object distance.
if support object distance is lower than "flow width + brim_object_gap", the brim will not work.
Therefore, if first layer of common support is interesected with object island, the distance will be brim_object_gap in auto brim mode.
Change-Id: Icbb98af8fd9e84e3ac1977794ca2b60629dd53dd
1) if an object has a slender footprint but its height is small, brim will not be generated;
2) two volumes are treated as intersected if their distance is larger than 0.3mm, instead of 0.8mm.
Change-Id: Iaf7ab644ba9bcc1a8d404acd455f1d8b57e1eb91
0. disable arranging selected
1. fix bug where brim is not correct.
2. fix bug where big circle objects are not arranged properly
3. disable default enable_rotation
Change-Id: Ifc69f35d900ff63ec1e9ec8bf8638afc6ea7d54b
(cherry picked from commit 2ed1b0dd8573a1e10aaf77f0d9f8896cef304427)
Disable the spacing adjustment by bounding box before
fixing, to avoid overflow in some cases.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I13c751c8d46040156d79c1fdfc513f22f5e40fe2
bbl cloud can not parse character '&’
use xml_escape to convert to xml format
Change-Id: I9a2c0abb3c80c26be6f3add507c133f72b2bf7d1
Signed-off-by: Stone Li <stone.li@bambulab.com>
when logout, if the preset selected is still there
we should not select it by force, which will cause the edited preset cleaned
Change-Id: I930cfcb04eae7473f6bc5f037d26b852013b6f42
Filament type of Bambu PA-CF in RFID is PA-CF.
Change it to PA-CF as well in preset to avoid
failure of AMS mapping.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic6b6269123d59863fea2b7d262a124468c95b8af
As title. User can delete the value to enable 256x256 printable
size
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia10454b7a7a1b28c04d8d41df9f3251875f6e74e
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
salt.wei
Arthur
liz.li
Stone Li
lane.wei
zhimin.zeng
SoftFever
yifan.wu
chunmao.guo
qing.zhang
wintergua
tao.jin
xiangdong.yang