0b95bdd9d9
ENH: do another map for ams filaments
...
1.If the group result differs little in flush,we will choose the one
that best fits the ams filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd147b406e3494c841ef13564ad1b1231ad798fd
2025-03-22 20:54:16 +08:00
f0d2ad3dbe
ENH: add tpu check for send print and cali
...
jira: 8234
Change-Id: I5706071d900079477abc9558461811a8d85fb0ab
2025-03-22 20:54:16 +08:00
8472e3011c
ENH: add wall vol speed when filament change
...
1.Add placeholder for outer wall volumetric speed when changing
filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib1d5608f95bc12777db5d848f6b037c27ea0fd03
2025-03-22 20:54:16 +08:00
8c88fabe8f
FIX: missing filament start gcode with 1 color
...
1. Caused by setting the current filament to filaments used
in machine start gcode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If6789b1e02aadc6d03610b7b7cc4c829ae767a7d
2025-03-22 20:54:16 +08:00
51de6253ce
NEW: Add "change filament to"
...
jira: none
Change-Id: Ic5550ed257e03033681de91ebca521390f902f66
2025-03-22 20:54:16 +08:00
631baa3999
ENH: modify the UI of filament map dialog
...
jira: none
Change-Id: I513a518de4509fb7adbc81d9fc3b0fc43fb3244a
2025-03-22 20:54:16 +08:00
f68a8aed24
FIX: single ams should not include vt slot
...
jira: none
Change-Id: I338b57c031b551783abea78ef021537d2d89dee9
2025-03-22 20:54:16 +08:00
913bace1eb
FIX: config: fix the 3mf export invalid issue when using single filament
...
JIRA: no-jira
Change-Id: I1faf1fd7ac2b3dfd99594856e3c84da12d805627
2025-03-22 20:53:56 +08:00
2636e44dc0
ENH: config: add exception when load old invalid 3mf
...
some param has been changed for the multi-extruder
currently we popup an exception
JIRA: no-jira
Change-Id: I1e892203d34c569a580694c1c28a1c7d695c1c64
2025-03-22 20:53:56 +08:00
994e4f4840
ENH: enhance accuracy of weight calculation
...
1.Use float to store the weight copmputed in the procedure.Avoid the
issue where filament weight remains at 0 after changing filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iff0cfc6e22f34affbc232dbfe196f27ee06d2d9e
2025-03-22 20:53:56 +08:00
0e848f4fba
FIX: crash when opening old version file
...
jira: STUDIO-8155
Change-Id: I67ac46f8e01d7c3ed2dedf40c1dab9841a3af02b
2025-03-22 20:53:56 +08:00
00a6e17c6c
FIX: fix ui display problem
...
jira: STUDIO-8143 STUDIO-8142
Change-Id: I50abb78f9585378d3ef7278377dfb35d5db6189d
2025-03-22 20:53:56 +08:00
fec7129437
FIX: modify unprintable_filament_ids should regroup
...
jira: none
Change-Id: Ifb8105f6e301aaed9ca4e62a37b9d3a1616e755b
2025-03-22 20:53:56 +08:00
d56bf872cf
ENH: some fix of previous commit
...
fix to I0c853de6b1938c7e2addbaab5a45b35daf5a32fa
Change-Id: I307f99b301709fd00090dc234c054dacfda2e76a
2025-03-22 20:53:56 +08:00
71987627ef
FIX: flush_volume use correct extra_flush_volume
...
and fix extruder_offset bug
jira: none
Change-Id: I84644ad5b54994ae65269531311386cacd972bf3
2025-03-22 20:53:56 +08:00
3b988f6b77
FIX: incorrect print sequence of support filament on first layer
...
jira: none
Change-Id: I893fc773849a5557c138de3f9bd1c3ec1e1978df
2025-03-22 20:53:55 +08:00
85ebb46995
ENH: Add limited filament maps to slice info
...
jira: none
Change-Id: I7b08943ba5f4e7fa9be18ba3f64caee182888d45
2025-03-22 20:53:55 +08:00
a44ff5a95a
ENH:show n3f/n3s version info
...
jira:[for n3s]
Change-Id: Ia0056dfdf7157036008cc63a37c9fd8076063a6a
2025-03-22 20:53:55 +08:00
a16ec053b4
FIX: get abs value for small perimeter speed
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I686b22f072ad0f87e50ef2321b92daaa3cb0154f
2025-03-22 20:53:55 +08:00
d1aac2513e
FIX: Prevent sending print when nozzle type dismatch
...
jira: none
Change-Id: I0278fd9bc22a9d9fd44b4d776f54de5fc07db6d0
2025-03-22 20:53:55 +08:00
c96102043b
FIX: double nozzle hybrid mapping
...
jira: none
Change-Id: I64908776a6265da7809814e62c9e7a860f39bffd
2025-03-22 20:53:55 +08:00
b620a4122e
ENH: Pass ams information for slicing
...
jira: none
Change-Id: I3fe12189b6e8246fd553dcd8659bf7f98e622767
2025-03-22 20:53:55 +08:00
fd257a2910
FIX: Update the Filament information by nozzle diameter
...
Jira: no_jira
Change-Id: Ib5265691df6b4a9a05eb6c9df5708badd3211904
2025-03-22 20:53:55 +08:00
64f471c2cc
FIX: limit the wipe tower to common areas for multi_extruder
...
jira: none
Change-Id: I58d061904610a5e33679e7254721bc43dcc22e64
2025-03-22 20:53:55 +08:00
f39eabfd9f
ENH: add tpu check when printing by object
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I366aa8387dfc8d1c94fe836ee4898424d04737c3
2025-03-22 20:53:55 +08:00
885e96d8db
FIX: fix build error
2025-03-22 20:53:55 +08:00
5aecc67874
ENH: some fix of previous commit
...
fix to If495a343efdb1be6f46d11dd20f6ec7934266e87
Change-Id: I9a0afee5c78a23e92c9c76bceff7937bb983918e
2025-03-22 20:53:54 +08:00
c75c10e312
ENH: Add gcode check for multi_extruder
...
jira: none
Change-Id: Iebc43e608c4509eb62b280af2d401fa9e0e089ba
2025-03-22 20:53:54 +08:00
c53a35856d
ENH: add filament cluster algorithm
...
1.Add new KMediods algorithm
2.Consider physical and geometric printables
3.Refine code structure
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I1412835c3c6380f9cedb44ff6914004365bba889
2025-03-22 20:53:54 +08:00
ed61d1d31b
FIX: fix flow ratio calib bug for single extruder printer
...
2. modify the filament_flow_ratio to nullable
jira:none
Change-Id: I3f0569ee643cfe9473c6029ca0e04f4b80c8332e
2025-03-22 20:53:54 +08:00
38b3c32b6a
ENH: flow_ratio cali support multi_extuder
...
jira: none
Change-Id: I03399040a772043d3d20116b0588fd04e0725be1
2025-03-22 20:53:54 +08:00
c1bf153a19
FIX: recover delete filament button
...
jira: none
Change-Id: I4972883081e424f5e0ac1c60a7cfc28d5248f442
2025-03-22 20:53:54 +08:00
276c797faf
FIX: remove extra filament change
...
Jira: none
if the fist print filement as same as the filament be set on start gcode
not insert filment change
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0114f287fff9be276a90772537d1910df18dec61
2025-03-22 20:53:54 +08:00
ede9f90a79
ENH: support tpu for multi_extruder
...
jira: none
Change-Id: I556804aadac00406e7214b86f7925170a90c55ce
2025-03-22 20:53:54 +08:00
22feef013c
FIX: model: fix the bbox computing issue when update_instances_print_volume_state
...
JIRA: STUDIO-7498
Change-Id: I80fac3253d1bd6fcc49a4eb08dd68fe2e458c148
2025-03-22 20:53:54 +08:00
286eca79c2
FIX: Parse virtual slot info
...
jira: STUDIO-7724, STUDIO-7725
Change-Id: Id9181511b7503787fe06403be6ecb782d78cb21e
2025-03-22 20:53:54 +08:00
62b1d00d1f
ENH: 3dbed: support rendering extruder area with different color
...
JIRA: STUDIO-7494
Change-Id: I717999e8b7ab1d7d350299b412a3a270c6ba7a9e
2025-03-22 20:53:53 +08:00
2d791aea17
ENH: config: set default 'extruder_printable_area' to empty
...
JIRA: no-jira
Change-Id: I5d574a12684281faabbd1cf96e68e9b9ad593edc
2025-03-22 20:53:53 +08:00
e5be69dedd
ENH: dual_extruder: add logic to process extruder_printable_area
...
JIRA: STUDIO-7498
Change-Id: I1cf53db93acf41b06cb1b9569a0679487c9f1e41
2025-03-22 20:53:19 +08:00
2ebd14667e
ENH: add some params for multi extruder
...
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
2025-03-22 20:53:19 +08:00
68ed20dd09
ENH: extruder printable area default to be empty
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If4aad7329cd97141eaec3e438dee165e86536c66
2025-03-22 20:53:19 +08:00
8cf72ab46c
FIX: move the lift gcode from change_filament_gcode to GCode.cpp
...
and delete ;nozzle_change_gcode of change_filament_gcode
jira:none
Change-Id: I79c2896afe15b59ba3932240edcb6330e230470f
2025-03-22 20:53:19 +08:00
c1dec339dd
FIX: modify the filament_change_gcode
...
and set 1/4 max_volumetic_speed for TPU
jira: none
Change-Id: I492ce178a88fb702fc051f8a0abec6a4b5706d00
2025-03-22 20:53:19 +08:00
92fa0ff010
ENH: add ConfigOptionPointsGroups
...
1.Add extruder printable area
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I753344917a67e3d8ac361c15c3d374b5ef951d21
2025-03-22 20:53:18 +08:00
4c644d4715
FIX: crash when select filament in device
...
jira: STUDIO-7972
Change-Id: Ice9e7360fbfe0c07bd49bbd696bb3cfb662e94e4
2025-03-22 20:53:18 +08:00
56ed912c3e
ENH: vertical layout button
...
Change-Id: I0b205298688c9df88dcfe6eb6e72cc887a9ed5be
Jira: none
2025-03-22 20:53:18 +08:00
7f473c2027
FIX:when ams cali_idx is unknown, use default item
...
2. use transparent color when reset filament
jira: 7946
Change-Id: I129dc0e6b7244cad3b5e61e1bc423938f4b92d7e
2025-03-22 20:53:18 +08:00
aba72bb04f
FIX: single printer should not display summary item for default
...
jira: 7948
Change-Id: I9d13ebe8e52eb46e1ef9f7bd62f814bc7837dbe6
2025-03-22 20:53:18 +08:00
52e890fba1
FIX: modify for virtual slot when multi_extruder
...
jira: none
Change-Id: Ic7284018ecb44e24536788b05dba572b96460e66
2025-03-22 20:53:18 +08:00
fb72d19a44
FIX: pa default item add filament_id
...
jira: none
Change-Id: Icfc24390e62cc1eca7e670311dc88502cea16fd7
2025-03-22 20:53:18 +08:00
4c6316b981
FIX: add filament_id when reset ams setting
...
jira: none
Change-Id: Iedd2eec94bd1e41a51cededc06b304a2e29ef808
2025-03-22 20:53:18 +08:00
e5d2ea3909
FIX: slice status error when print by object
...
jira: none
Change-Id: Iaa8453cbf79a38984cdae085418165287fee21b1
2025-03-22 20:53:18 +08:00
ee3cb45b4d
FIX:use old tray_id for set ams filament
...
jira:[ams setting]
Change-Id: I965f532fbd590b501b40c2cc812d6d02054b3628
2025-03-22 20:53:18 +08:00
853825837a
FIX: Device interface display details
...
jira: STUDIO-7898, STUDIO-7906
Change-Id: Ifd49321c91822e10b0adac9b62cce5b2fe74dcdc
2025-03-22 20:53:18 +08:00
b2418c7417
FIX:Change text in stop printing dialog
...
jira: STUDIO-7899
Change-Id: Ic93f7322aa35c06dd98df2b70c9f24f94a62467c
2025-03-22 20:53:18 +08:00
5c05bd2698
ENH: some fix of previous commit
...
fix for I5cabae467c62391156e7af1fb99afc0b18400fb6
Change-Id: Ib8bf0bd09ad284808ce8343d4b420726dde3f393
2025-03-22 20:53:18 +08:00
135767f5c0
ENH: Add default pa item
...
jira: none
Change-Id: Idc632f945100ae7a6a0b674494f2a1844e0a42ef
2025-03-22 20:53:18 +08:00
11f61abefa
ENH: calib support multi_extruder(UI part)
...
jira: none
Change-Id: I3009c2f8b601dc078cfed787dc3531fc1d4848d6
2025-03-22 20:53:18 +08:00
3119a84eb2
FIX:fixed unable to reset ams filament setting
...
jira:[for reset ams]
Change-Id: I9f2f8be4a6e16b05191e4076db4e3f53d7601db4
2025-03-22 20:53:17 +08:00
c6251b4d64
FIX: compile warings caused by 64bit shift
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibce8e160a922c266bfb9b6a52fad01466fee8bef
2025-03-22 20:53:17 +08:00
1525c3c3ac
ENH: support custom layer sequence
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I73f030f2009b66aef20e3492f742d85970081e8a
2025-03-22 20:53:17 +08:00
1040f007b6
ENH: add summary for gcode preview
...
jira: none
Change-Id: I481536e0d950ebe695236e55ffca8113a26d8033
2025-03-22 20:52:56 +08:00
7d4d5f2c9b
ENH: change some params to nullable
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifd91da26d089c78e2d5036e145b7f4404535b7a5
2025-03-22 20:52:56 +08:00
ab81baee92
FIX: wrong placeholder data when filament change
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If6f6db1a2086c17541c7984c2db33d7bbcf21801
2025-03-22 20:52:56 +08:00
12b6f064a0
FIX:Use different ext-img for single/double nozzle
...
jira: STUDIO-7852
Change-Id: I4d8181834bc57ff3c3ba54fafe5ed266a7a2b843
2025-03-22 20:52:56 +08:00
2c3fa062c9
FIX: Bed type display
...
jira: none
Change-Id: Ibac2a7a80d6841ebea639e0a58547413df6f5c74
2025-03-22 20:52:56 +08:00
6fb06eb779
ENH: some fix of previous patch
...
some fix to
Ib37896f9101d93ca63c7edb0b1e6328045a5ddb3
I4b5c8e158b073b302db6faad77bb8ca0f70f766a
Change-Id: Iec62a4df45159bac3db63c48feef16ec1aa35ae7
2025-03-22 20:52:56 +08:00
acdc8077e8
ENH: some modification to previous commit
...
some fix to I0a100746b2845bba57f57e8f6962eca1dbd562aa
FIX:Default option of stop printing is no
Change-Id: I683101f55c3113b9ba99dc59dded95c38b4b243f
2025-03-22 20:52:55 +08:00
7bb5060b73
FIX: Add bed type in send print page
...
jira: STUDIO-7824
Change-Id: I64d9ed41b862ed4e3b8c21218c289132d767105e
2025-03-22 20:52:55 +08:00
706c79f4f4
FIX: G1 F0 in gcode
...
jira: 7631
Change-Id: I247e47756f1382d77f104a6ba97883e01d9d0187
2025-03-22 20:52:55 +08:00
18894bd803
FIX: mistake use of extruder id
...
Should use filament id instead of extruder id
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I669092da6902158ad5f89d4814c78eabdfb2e7c7
2025-03-22 20:52:55 +08:00
9ee85bef34
FIX: enhance filament_map auto manual behavior
...
1. auto mode dragdrop is not allowed
2. not display filament_map when there is no result in auto mode
jira:none
Change-Id: I0800e0d832e27fe459a17bb1aa829b5e72d0ee8f
2025-03-22 20:52:55 +08:00
7df6f6c986
FIX: is_ams_need_update for vt slots
...
Change-Id: Iddf3aa9da6c0c4b434d91439828ec0223ecea9d5
Jira: STUDIO-7822
2025-03-22 20:52:55 +08:00
53d066a2b6
FIX: PA value display
...
jira: STUDIO-7725
Change-Id: If3fbdd831f848731587e66c273cc0317a2ba33fe
2025-03-22 20:52:55 +08:00
362fcd7a41
FIX: Add serial number for AMSLite
...
jira: STUDIO-7825
Change-Id: Ie17c4ce6953b7b46a39f51e038eacf10bfddc670
2025-03-22 20:52:55 +08:00
66701cc4c9
FIX: Mapping UI display
...
jira: STUDIO-7473, 7817
Change-Id: Ibd014985b3b4997bd86700537e1d8a7d0d18176f
2025-03-22 20:52:55 +08:00
0716b8518e
ENH: add tool order function
...
1.Use min cost max flow to solve the tool order
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I909845039b67c7fe3ddd42580ad3f1d71d52262d
2025-03-22 20:52:55 +08:00
0f70c81a7d
ENH: optmize code structure of tool order
...
1.Put reorder functions in ToolOrderUtils
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I49c7b447ba1f41f3747ba3127d842c4e3957b5ff
2025-03-22 20:52:55 +08:00
a80e60bd2b
FIX: extruder sync visible & nozzle_volume_type
...
Change-Id: Id25c325fee6facbd15dbc99688ef3e9fb34efaf0
Jira: none
2025-03-22 20:52:55 +08:00
ac1a1d69a1
FIX: N3S AMS display
...
jira: none
Change-Id: Ib6f4bdd0ada9df2d1aacc33568507471e29897c1
2025-03-22 20:52:55 +08:00
fe8b904e75
ENH: config: add default_nozzle_volume_type in printer
...
1. also remove original nozzle_volume_type from printer
and move into project config
2. support save nozzle_volume_type into appconfig
and load from it at beginning or printer switch
jira: no-jira
Change-Id: I01fc82d142fc633fc59a238796a71b9f8d180efb
2025-03-22 20:52:24 +08:00
8bdac292a0
FIX: load_from_svg_file_change_color() supports 8bit colour values
...
JIRA: nojira
Change-Id: I72e68bd9cb547064736d130205074da0e7eabd60
2025-03-22 20:52:24 +08:00
02a38db9c4
FIX: UI of display two nozzles
...
jira: STUDIO-7785
Change-Id: I85298721191a6dbb0c93b2dfd9db85494179631d
2025-03-22 20:52:24 +08:00
7bd3a5218a
FIX: cannot cali for single nozzle printer
...
jira: none
Change-Id: I1cc0e5e4b0f9db2a66694c894f96a14047fde9e5
2025-03-22 20:52:24 +08:00
b7176bfdd1
FIX: only single extruder printer display the icon
...
of FilamentSettingDialog
jira: 7714
Change-Id: I5d6eca802b9be1fcdeaa28d9e4fbc4862d8c8378
2025-03-22 20:52:24 +08:00
9b510c0aeb
FIX: the order of cans in AMSLite
...
jira: STUDIO-7765, STUDIO-7766, STUDIO-7767, STUDIO-7721, STUDIO-7713
Change-Id: If95e0667fc1d615c0494b007f7f7408f68e5b21c
2025-03-22 20:52:23 +08:00
46efe15427
FIX:support show n3f ams in mapping popup
...
jira:[for n3f ams]
Change-Id: I619010de072df1635e1bb39b694c7a0e0a7c127a
2025-03-22 20:52:23 +08:00
8b2a94ed5f
ENH: wipe tower support nozzle change
...
jira: none
Change-Id: I398a508cbc8d02644b60e504405392254329ef10
2025-03-22 20:52:23 +08:00
9801a10f7f
ENH: drop variant modify values if inconsistant
...
Change-Id: I6c3e487e4b222df63f91aceccff13c3afd002ab8
Jira: none
2025-03-22 20:52:23 +08:00
b49d4ca153
ENH: save multi extruder state in gcode processor
...
1.Save multi extruder state in gcode processor
2.Add machine exturder change time
3.Fix some naming issues
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9785331290515eeb908ff0ff01aad5aac44212d9
2025-03-22 20:51:44 +08:00
5f30ee389e
ENH: config apply_only vector at index
...
Change-Id: I7bf5a44b2d3db2e21207696b6ef7e41a499da078
Jira: STUDIO-7747
2025-03-22 20:41:57 +08:00
99048f668c
FIX: show/hide extruder sync in tab
...
Change-Id: I77e8c68df9a238ac9bf2c367bac3fd1ade0fe060
Jira: STUDIO-7758
2025-03-22 20:41:56 +08:00
1caf0f3ddb
FIX: device interface crash
...
jira: NONE
Change-Id: If2480ac842a5f609d80e33f41a88f747903681a6
2025-03-22 20:41:56 +08:00
065c8d029e
FIX: Ams control display
...
jira: NONE
Change-Id: I221eb4167dad894c9e7f32141d33c5c96934df96
2025-03-22 20:41:56 +08:00
733cb96805
FIX: fix the gcodes loading issue
...
JIRA: STUDIO-7718
Change-Id: I9dcaa59ed639d590d432ef722077082b093019f4
2025-03-22 20:40:26 +08:00
2dbc5c9396
ENH: add manual grouping mode stats
...
1.In auto mode,display the statistics of auto mode and single
extruder
2.In manual mode,display the statistics of manual mode and auto mode
3.Support by object mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If54c4db79f33d5278c0f18d01ab0518e8660f9c7
2025-03-22 20:40:26 +08:00
0756b51eb2
FIX: wrong filament map in layer filament
...
1.Should calculate cost if filament used in that layer is 1,because
we should consider the last filament used in previous layer
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5838af77f1d73bfa07c65bd6ee12ae352dc3b571
2025-03-22 20:40:26 +08:00
1d4ce2bad5
FIX: only display used filament on filament dialog
...
jira: none
Change-Id: Id643d1efad26eb2719f873543c2e451fe59dc5bb
2025-03-22 20:40:26 +08:00
2aed1142ec
ENH: UnsavedChangesDialog support extruder variant
...
Change-Id: Ifd021461d23b385b71dedbe9cc864eeee1a2541b
Jira: STUDIO-7711
2025-03-22 20:40:26 +08:00
c49c0c8f72
ENH: modify forcast limit number
...
1.Use forcast when filament num in current layer and next layer both
smaller than limit number
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia21bb22ce353f0c74eeaf748c6d9f9c4b315ec18
2025-03-22 20:40:25 +08:00
d945e2c3ed
FIX: hide parem extruder sync button for diff nozzles
...
Change-Id: If332da20427177bf593a9ba22f31a76e1ed1a303
Jira: STUDIO-7717, STUDIO-7716, STUDIO-7706
2025-03-22 20:40:25 +08:00
0917202733
FIX: crash when opening makerworld model
...
jira: none
Change-Id: Ib0b04584748181cce8b23dc44b247f2ade225a26
2025-03-22 20:40:25 +08:00
b0919d560b
FIX: rendering: fix some rendering issues for plate
...
1. reset exclude areas when there is no triangles
2. set o1d size with no offset
jira: no-jira
Change-Id: Ic6add0db0a93a7a6b44fc59524d4e93543251957
2025-03-22 20:40:25 +08:00
a174000ec1
FIX: only multi-nozzle display multi-extruder combobox
...
jira: 7686
Change-Id: Ic95d0789582e0a9dbb0edc2421ee076fdadb3572
2025-03-22 20:40:25 +08:00
5f0bb395ad
FIX: plater: fix the slicing state not correct issue
...
after change the filament maps, we should invalidate state
jira:none
Change-Id: If2923d959f5120bd80c5bdf3933609cf8b282523
2025-03-22 20:40:25 +08:00
78c5928194
ENH:support set ams filament
...
jira:[for 2nozzle setting]
Change-Id: Ib9e20bcdf6d8ea1bf5dd5e8624a68730e05e69ad
2025-03-22 20:40:25 +08:00
62624e2a13
FIX:fixed amscontrol issue-2
...
jira:[for fixed amscontrol issue2]
Change-Id: Iefd80b4dbdeb1330c6a6a5695b5ceca45c99137a
2025-03-22 20:40:25 +08:00
93a9b16494
FIX: fix crash
...
jira: NONE
Change-Id: I95ef9a8aefbbb8de7caa9c9b46de7cb3f60e0989
2025-03-22 20:40:25 +08:00
fe1d241a16
FIX: Device page fails to display
...
jira: NONE
Change-Id: Ie8f88c4c5f585486bda2786d9c6a5ad7f89615ef
2025-03-22 20:40:25 +08:00
ad65cdb909
ENH: add filament saved by multi extruder
...
1.Add filament flush,filament change count reduced by multi
extruder
NTOE: cases when printing by object haven't been handled
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iaaea5f8ffae2345df5a6f1dc605342d835974d48
2025-03-22 20:40:25 +08:00
3a55a3a1ee
FIX: context: fix the .gcode.3mf not shown issue
...
filament_self_index difference caused
JIRA: no-jira
Change-Id: Ia70fe8a8095b8067fe13bbfc9e5c39d9f3ee05d3
2025-03-22 20:40:25 +08:00
55898ab88e
FIX:fixed some amscontrol issue
...
jira:[for fix amscontrol issue]
Change-Id: Id62ffd047403bf80f6aba732b8ce31d782bcea57
2025-03-22 20:40:24 +08:00
3e8fe435e3
FIX: Ams road display
...
jira: [Ams road display]
Change-Id: I1669bb588c969fe1cee7149d0d900cda3758deb3
2025-03-22 20:36:49 +08:00
f722334f3b
ENH: extruder switch for 'Motion ability'
...
Change-Id: Ib327b3f4362cafa8f2425785b7184acf27df89a2
Jira: none
2025-03-22 20:36:49 +08:00
7280429583
FIX: filament filter dirty options
...
Change-Id: I00e0df4c2f9dc43f12b38e52c87a353b3f3e38fd
Jira: STUDIO-7643
2025-03-22 20:36:49 +08:00
b78fa4c11c
ENH:refactoring the modules of amscontrol
...
JIRA:[amscontrol 2.0]
Change-Id: Ica66500506cfe89f2eac3ae0a58fb7ff30d1da9a
2025-03-22 20:36:45 +08:00
3167e34e60
ENH: add greedy algorithm for filament reorder
...
1.When n becomes large,the original algorithm to get best filament
sequence will cost too much time and memory.Use a greedy algorithm
instead.Always select the next filament with fewest flush
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iabc924e1bdb0a07af0a6ef0bbdd62e54ce54f052
2025-03-22 20:32:28 +08:00
adf208dbb9
FIX: multi extruder percent param
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I98d2f1df419bbf815efa5a2f0f48656a71ef15ab
2025-03-22 20:32:28 +08:00
f122c4f4ef
ENH: config: refine some small logic
...
1. always resize filament count when not matched in full_fff_print
2. remove no-use codes in Preset::normalize
jira: no-jira
Change-Id: Ie15a5977d28f28e0f63ba84f27f98f77d16665c0
2025-03-22 20:32:28 +08:00
7ce2bb70df
FIX: mistake in profiles
...
1.Spelling mistake in long retraction
2.Some params length change to 4
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8952df7a1bbf060471e24a19eaeddde017d17d82
2025-03-22 20:32:28 +08:00
1745657e22
FIX: filament variant index & override nil value
...
Change-Id: I828fff09df39a60d59af516c969466d9b09e503f
Jira: none
2025-03-22 20:32:28 +08:00
e746035f31
FIX:Fix some multi nozzle issues
...
jira:[for multi nozzle]
Change-Id: Ibb9dafc3e664adb3a9058766f47f2d28938d6a0b
2025-03-22 20:32:28 +08:00
fe9e88f1c8
FIX: edit filament dialog crash after ams sync
...
jira: none
Change-Id: Ia551fa75400cef217e6d630aee76d00a06449b1a
2025-03-22 20:32:28 +08:00
e95179427f
FIX: unable to custom first layer filament order
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0107ebf6a85ea0deba93ff558835138981365670
2025-03-22 20:32:28 +08:00
8b4182d0c1
FIX: Ext auto fill when mapping item is empty
...
jira: [Ext auto fill]
Change-Id: I4a8844555e33fcf9f7054fc2e0e254621dec0a1d
2025-03-22 20:32:27 +08:00
16cadec565
ENH: add grab length
...
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
2025-03-22 20:32:27 +08:00
887ca8f45f
ENH: enable long retraction for multi_extruder
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I41daa7a5f1eabf0a805a86d72d00544c8f4edb4a
2025-03-22 20:32:27 +08:00
da32b878b3
ENH: add extruder_ams_count behavior
...
1. save to appconfig and project setting
2. use it to group
jira: none
Change-Id: Id4048fc1b47f6904b2e9c0154aaa3a2b03590437
2025-03-22 20:32:27 +08:00
6c02c7bc8c
ENH:support parse new print data
...
jira:[for new print data]
Change-Id: Iac6747e9ade690fcdf3b7b11239fe183bc7c3796
2025-03-22 20:32:27 +08:00
67f67d7688
NEW: Add FilamentMapDialog
...
support drag drop to modify the filament map
jira: none
Change-Id: I0ed3180a0fa8e95e7c871bb039eb844faccd1344
2025-03-22 20:32:27 +08:00
cffb4a8564
ENH: optimize filament group algorithm
...
1.When filament <10, do the reorder with next layer.This can reduce
10% flush in some cases
2.Support custom filament seq
3.Use caches to speed the algorithm
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie1af9841f7165802d350eae962efe8febafbb357
2025-03-22 20:32:27 +08:00
9166c1d0c4
FIX:Ams cannot mapping
...
jira: [ams mapping]
Change-Id: I17b88b169c30e7c567e5e505bd7f7c56357466eb
2025-03-22 20:32:27 +08:00
91ea29eb56
FIX: inconsistent colour arrange display at different resolutions
...
JIRA: no
Change-Id: Id838bf68c8a58d9075994052af10fa31bacc2ed3
2025-03-22 20:32:27 +08:00
a1491f432e
ENH: Synchronize the modification of parameters to another extruder.
...
Change-Id: Ieac8dce3f4edec310a51d8e3af90df81a2abcbdb
Jira: none
2025-03-22 20:32:27 +08:00
0d31c1d512
ENH: filament variant combobox
...
Change-Id: I6015bc7682cbf3209b03392c0ab4727e66d12ab1
Jira: none
2025-03-22 20:32:27 +08:00
cddf8cae27
ENH: add filament group strategy
...
1.When capacity is greater than the num of filaments, always choose the
map result that can be accommodated
2.In BestFit strategy,always try to fill up the existing capacity
3.In BestCost strategy, just try the group with fewest flush
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifd6d64b77774039e57ffff26cf2243a4d3f89054
2025-03-22 20:32:26 +08:00
8232a716e6
FIX: fix bug when delete filament
...
update filament of HeightRange
jira: none
Change-Id: I62cb21a65ecdfc36e8bc7d0915a85ecba578e49f
2025-03-22 20:32:26 +08:00
a6ad5c8be8
FIX: update filament map of plate when switching preset
...
that has different nozzle nums
jira:none
Change-Id: If78571ddf4fa7ac17e7dcf47013075821b8567a6
2025-03-22 20:32:26 +08:00
ed98163973
FIX: save filament_maps to slice_info
...
and fix bug when switching printer preset between single-nozzle and double-nozzle, prompt the modification of extruder_count
jira:none
Change-Id: I1d5f0b2f002493378d2f482d08cfd5a72b35b99f
2025-03-22 20:32:26 +08:00
3179fd416e
ENH: config: add logic to apply params to object/region config with multi-extruder
...
JIRA: no-jira
Change-Id: Ieab98cd8d031e5ca82a3aad2d0b89d8ae4a794f1
2025-03-22 20:32:26 +08:00
c9736865ef
ENH: disable encoding check by default
...
encoding check is useless other than wasting your time.
jira: none
Change-Id: If06535091ed0cc7666812b375a6d930cdd201b98
2025-03-22 20:32:26 +08:00
cc81e57ac9
FIX: compatible with one extruder reorder
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7e350ba8728ac4b3dd34093ff4e9647d0a2ba671
2025-03-22 20:32:26 +08:00
579e84e5d2
ENH: toggle print options with variant index
...
Change-Id: I80136f27cf81557106101107ccea1db51032066d
Jira: none
2025-03-22 20:32:26 +08:00
7128e2925a
FIX: logic error in filament change
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7e2b1333d4b82e4495375fcf4daec3aea08be445
2025-03-22 20:32:26 +08:00
0434853bf3
ENH: config: remove unused custome_defined logic
...
also improve project_embedded
1. remove unused is_custom_defined
2. improve project_embedded to support multi-extruder diff
jira: no-jira
Change-Id: I1db28c3cfd59ccc31c6855af30305396c71c4e9a
2025-03-22 20:32:26 +08:00
ad03fae1eb
FIX: Clean up the code
...
1. Refactor recommended code for print by object
2. Calibration adaptation sends print command
jira: none
Change-Id: I24fd92d6aca07a7067e09bb200854e5bec72a324
2025-03-22 20:32:26 +08:00
1ab2964ee3
ENH: alternate multi-head printing sequence
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I739438e8c411b638571d5291f3e5ad3d54650a73
2025-03-22 20:32:26 +08:00
f1b0805ed1
FIX: wrong flush logic
...
1.Fix flush calc logic
2.Rename m_extruder in GCodeWriter
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I38f023fbad983305632ca62cbfb3909759013c25
2025-03-22 20:32:25 +08:00
9ec276d3d7
ENH: new filament group algorithm
...
1.When n<10, calc all case cost
2.When n>10, first k-medoids algorithm first
3.Enable setting group size
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I625f47e0235c70e440c6d489b052a156fbffca3f
2025-03-22 20:32:25 +08:00
326d7d28b4
FIX: fix build error
...
jira: none
Change-Id: I97df69b728fc3871b7c33e1fd3ba068e741d51c7
2025-03-22 20:32:25 +08:00
21e6271e59
ENH: calib support multi_extruder
...
1. backend support multi_extrude data structure
2. Compatible with third-party calibration
3. fix bug when get extruder in gocde export process
Change-Id: I5dac9abdd9907a521a1ba9b480f9e05640591bc1
2025-03-22 20:32:25 +08:00
0924fce685
NEW:change mapping popup layout for multi nozzles.
...
jira:[Popup for multi nozzles]
Change-Id: I07e6d8f0469d2dcf0037d53e2ca8e22de78ca233
2025-03-22 20:32:25 +08:00
7b7ebf1b95
ENH: config: add the extruder variant apply logic in Print::Apply()
...
we need to keep the original values and update after pre-slice
jira: no-jira
Change-Id: I232d3c43340b4a23bc42121bd05380746e736f20
2025-03-22 20:32:25 +08:00
3321277f86
FIX:gcode viewer color arrangement recommendation
...
1.Limit of four filaments per row
2.Fix incorrect data
3.Add filament id display
4.Optimised layout
Change-Id: I9ac3701c99597a5ed243dac0e3e371cf9aca4066
2025-03-22 20:31:45 +08:00
4086ec60c2
ENH: config: add some miss codes
...
previous commit 'ENH: config: add nill load/save logic for user config' jira: no-jira
Change-Id: I91ab326e533d54846518d11b457db0b0afe4d499
2025-03-22 20:31:45 +08:00
603f93d97f
ENH: config: add nill load/save logic for user config
...
Change-Id: I8da6c5b345cc088862f2c720aeb742b9617ff3e7
2025-03-22 20:31:45 +08:00
3c32b2c5a6
ENH: enable params with silent mode
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id46fa5de3a58e0fd3c3b0aa28524a03ca9a38f1a
2025-03-22 20:31:45 +08:00
7e7e872366
FIX: config deep compare & plate config extruder switch
...
Change-Id: Iae1716e6511e252f131ab4355f9521d7611d7133
2025-03-22 20:31:45 +08:00
62ef51d051
NEW: two nozzles ams mapping
...
jira:[two nozzles ams mapping]
Change-Id: I914439114b2946cdc1e3e4eb07a37f75f0529c12
2025-03-22 20:31:45 +08:00
d520fc59eb
ENH: context: update filament_maps under auto mode after process
...
JIRA: no-jira
Change-Id: Ia14ed67343b876532931e3106d667973d9ea233d
2025-03-22 20:31:44 +08:00
4014c61f88
NEW: gcode viewer add recommended colour filament widget
...
Change-Id: I37f38a175bb3f4a574a4855f8fef04e704da259c
2025-03-22 20:31:44 +08:00
582b2d470f
ENH: edit object config variant value
...
Change-Id: I97490f555a8a2848ccea78f74d79f71b0e93b36d
2025-03-22 20:31:44 +08:00
b45e30543e
FIX: ams filament & process config dirty
...
Change-Id: I80d9b30c82aa2830b821e7317370756d4e99e36d
2025-03-22 20:31:44 +08:00
b42d94e1d0
ENH: support recommended filament map when print by object
...
1. support recommended filament map when print by object
2. placeholder_parser support function filament_change
3. extruder_id of filament_map is start from 1
Change-Id: Ide8019cd4a165a25972f22706ff685c3005aa031
2025-03-22 20:31:44 +08:00
b08ed80f82
FIX: fix the compiling issue
...
jira: no jira
Change-Id: I864e16fb40a7735d25e5df667148de8bc4d3f120
2025-03-22 20:31:44 +08:00
5defd2b7c3
ENH: config: add extrudrer variant check logic
...
when load config from 3mf
Change-Id: I946ba777853e479418fcd1b49209f75ed41f33f3
2025-03-22 20:31:44 +08:00
dcd9fd5013
FIX: backend get the extruder id based on filament_map
...
Change-Id: Ib7679c0fc67336e462467dab9f5b4d4684d6eb19
2025-03-22 20:31:44 +08:00
575572f184
ENH: param tab variant index & extruder switch
...
Change-Id: Icad6bce3b23ea98d5ef497ceabacc52f294af8f2
2025-03-22 20:31:44 +08:00
366a14d8f7
FIX: parameters modify of printer preset
...
Ensure correct behavior when modifying parameters of printer preset
Change-Id: Ic627a8e202bf4224b742336cc43ac611ddc5c997
2025-03-22 20:31:43 +08:00
8c8c9a967b
ENH: Add recommend filament maps method
...
Change-Id: I3945a8b9f0a57e10a1d230003f21c9877cc5f342
2025-03-22 20:31:43 +08:00
e770043c4d
ENH: add stride in get_index_for_extruder
...
JIRA: no-jira
Change-Id: If529296bf6d35edc35aee3ff497184dce70332d1
2025-03-22 20:31:43 +08:00
bbc4d701bf
ENH: add check logic of filament_map when Print::Apply
...
Change-Id: Ibab353c4b16183611d63d75bcdf5f370cb578f21
2025-03-22 20:31:43 +08:00
e9081ba8d4
ENH: filament: delete filament_extruder_id related logic
...
jira: no jira
Change-Id: Ie0d8e31a6a3eef0400b3ba6238f817bad4daca24
2025-03-22 20:31:43 +08:00
5b0d525957
ENH: Display and modification of printer presets
...
Change-Id: I6a38704864fd4994a845686a299bec67f1b9b9b3
2025-03-22 20:31:43 +08:00
0065ea986f
ENH: filament actions and dual extruder filaments
...
Change-Id: I12a83f29c96887fc910976ac8e025c4f1508d945
2025-03-22 20:31:43 +08:00
faa2386b0d
ENH: printer preset display multi_extruder
...
Change-Id: Ibf479140964e9b2c6105d947fe21684cfce4b589
2025-03-22 20:31:43 +08:00
b0e3ab037e
ENH: config: add filament_maps in partplate
...
Change-Id: I1183830788e703f1d33a8a4b620b58b822283dd4
2025-03-22 20:31:43 +08:00
f3d67a98ac
ENH: support delete any filament id
...
Change-Id: I71bcd54985b3f9e19a19d04327d00b402ec22380
2025-03-22 20:31:42 +08:00
6fbad9ed33
ENH: flush_volume support multi_extruder and fix bug
...
Change-Id: Id6b041f71ee6e55e68a6937f24ce791caac8e708
2025-03-22 20:31:42 +08:00
8b2544df41
FIX: Use the same api to get the extruder id
...
jira: none
Change-Id: I05b3040b176374deee3e95bc52364fe7b33bb257
2025-03-22 20:31:42 +08:00
8af6f6d13b
ENH: implement mult extruder params
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I906b106aa4c73272a418528db0e964d9130b0dd7
2025-03-22 20:31:42 +08:00
03058ba29d
NEW: config: add logic in config system to support multiple extruder
...
1. add nozzle_volume_type
2. add extruder_variant_list
3. add printer_extruder_variant,print_extruder_variant, filament_extruder_variant
4. construct backend fullprintconfig
Change-Id: I50659634e2cde363112ff5ded6c199d7548c6f2f
2025-03-22 20:31:42 +08:00
26bf483bfe
FIX: impl sync extruder information & fix something
...
Change-Id: I5f7224f646729cba94505487d00015a8e48443c5
2025-03-22 20:30:23 +08:00
507c6a9b2c
ENH: dual extruder nozzle setting on sidebar
...
Change-Id: I7bc4209b311360c3357e3974f0e66a51daa78232
2025-03-22 20:30:23 +08:00
e1d1d3e8ca
FIX: support more than 16 extruders
...
jira: none
Change-Id: I169f672b99088b0a0a0132265d958e3239051744
2025-03-22 20:30:23 +08:00
6b09cfee71
FIX: modify parameter type of process preset
...
jira: none
Change-Id: I5c973a29e5b983e3f480d55aeeb2b14d13e950ee
2025-03-22 20:30:22 +08:00
3b93bd2dd3
NEW:support new ext slot mapping
...
jira:[support new mapping]
Change-Id: Iaf88f7bd57177df772a926ad162bd3b5a141327a
2025-03-22 20:30:19 +08:00
260a7202fc
NEW:Use new ams mappiong item ui/ux
...
jira:[STUDIO-7347]
Change-Id: Iba306c4a1b5ae59e406a6862428b425a48002870
2025-03-22 20:28:36 +08:00
7da565f058
ENH: remove the appended T cmd after change filament
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id5da64626b7343a71dcb38c06f5b5caf43ec40e2
2025-03-22 20:28:08 +08:00
c0932e16ff
NEW:support new mapping type
...
jira:[support new mapping]
Change-Id: I88e5d3b6966d4ed1e8098d13fe9335fecf6e01c4
2025-03-22 20:27:38 +08:00
0848c26da9
ENH:support new amsmapping data
...
jira:[for 2 extruder]
Change-Id: Ie03eae17d600bc68451511a0179f20d1919ff6ea
2025-03-22 20:27:35 +08:00
48c1710acf
NEW:add "camera navigation" function
...
jira:none
code is from OrcaSlicer, thanks for OrcaSlicer and Noisyfox
commit bf4d59a6764ddadd23ae566bf178f98e06bc3b5c
Author: Noisyfox <timemanager.rick@gmail.com>
Date: Tue Feb 27 21:57:31 2024 +0800
QoL: 3D navigator (#4181 )
Change-Id: I19f83d6dd7244c4daaa9c9993378cbd90333c3b9
(cherry picked from commit 74903968fdc8bd25ab48a722f893c38c801417d3)
2025-03-22 20:21:52 +08:00
b82de541f5
FIX:ui_and_3d_volume_map should consider obj_idx
...
jira: github 5195
Change-Id: I0726b183257604336c274e60d8cc76a3f81877b7
2025-03-22 20:21:52 +08:00
c74a769c14
NEW:add "extruder_only_area" textures for
...
double extruder machine
jira:none
Change-Id: Iaf4118fb00641537838dae7cc5fdaaf07ccc9851
(cherry picked from commit a8d6c9fe8976dbcb79c1f89efb7107073cb17856)
2025-03-22 20:21:52 +08:00
3a233b06db
FIX:add "check_objects_empty_and_gcode3mf" api
...
jira: none
Change-Id: I8ffa72f5898292dbb8c539b743acd18d12e8dbb7
2025-03-22 20:21:52 +08:00
8541f5e893
FIX:use flip_triangles when mesh volume < 0
...
jira: none
Change-Id: I682c737398f347a3243b6202132aae65d5415bdf
2025-03-22 20:21:24 +08:00
2ce2d8c94a
ENH:enable dual graphics card option(default)
...
jira: none
Change-Id: I0e973d48b23162f5a790c7ffc85f19be86f47647
(cherry picked from commit 9c0f70e552a06dddbc71b8d8a0287610aab6acf9)
2025-03-22 20:20:09 +08:00
77922a9da4
FIX:modify "load_project" api
...
jira: none
Change-Id: I41471a2f02dab3532621974a24693b019adb22bf
2025-03-22 20:20:00 +08:00
3a344fa934
FIX:Replace with STL cannot replace step file
...
GITHUB: #5305
Change-Id: I2d1268027e11f71ee43ba0ca13bcbefc0581df4a
2025-03-22 20:19:03 +08:00
704d52b48e
ENH:Set the shortcut key for Brim Ears to B
...
jira: nojira
Change-Id: I92c49e1459509bfd5caaf0f1067faf6efaad7f2e
2025-03-22 20:18:48 +08:00
cd3f05b3fe
FIX: crash while the first layer is empty
...
Github: 5376
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I64a0612ec4bf1ead099029db5f8e9f59e0b704af
2025-03-22 20:18:26 +08:00
abb8e6ed11
FIX:No brim ears generated if brim width is set to 0
...
GITHUB: #5431
Change-Id: Ia5911b1e24f09e385a66c3a0cdb3fe83fb090f57
(cherry picked from commit 1f419489f76209e47babe6b378c436178fcb3264)
2025-03-22 20:18:04 +08:00
05c4e9d183
ENH:ubuntu dark mode disply optimization
...
GITHUB: #4943
Change-Id: Ic8c6cf64c801e6c95e3f7e9e6959ed1a369ed3a3
(cherry picked from commit e723c87d8c41c195e980e11051f7beded9420d2a)
2025-03-22 20:17:35 +08:00
a1037509ae
ENH:Brim ear updates model object in real-time
...
jira: studio-8687 8683
Change-Id: Ic730957bf8c1e96c0464791cce60cb097d1a4dc9
(cherry picked from commit af174cb8b64e870929f926d3957d3471d0b09e29)
2025-03-22 20:12:02 +08:00
6a12df8afa
ENH:Hide non-bottom brim ears, disable dragging
...
Jira: STUDIO-8686 8681
Change-Id: Ie32eaeb807b25605d668c16c55ecbacf167a38e3
(cherry picked from commit 6b36c305d86fe8ef37b34b16d960ca90c8a07a5f)
2025-03-22 20:11:42 +08:00
4b48ad9743
FIX: Fix focus stealing from printer disconnection
...
Every time one of the connected printers disconnects, the
the old code would try to set the keyboard focus to the "Device" tab,
leading to a number of, either, focus stealing events, or notifications
if the desktop has focus stealing prevention (like GNOME).
Disable the focus setting on Linux to prevent that focus stealing.
See https://github.com/bambulab/BambuStudio/pull/5891#issuecomment-2635143655
2025-03-17 16:35:12 +08:00
cd8a9786a8
FIX: Fix focus stealing from app when filament changes
...
At every filament related event, the old code would try to set the
keyboard focus to the "Device" tab, leading to a number of, either,
focus stealing events, or notifications if the desktop has focus
stealing prevention (like GNOME).
Disable the focus setting on Linux to prevent that focus stealing.
Closes: https://github.com/bambulab/BambuStudio/issues/3046
2025-03-17 16:35:12 +08:00
7d1b21c5fc
FIX:boost::filesystem::path should use utf-8 encode string
...
jira: none
Change-Id: I51da114a5af35a510660b30cdbf05293cceb8381
(cherry picked from commit c7f57b66175138d6d7591d664476e883bf276854)
2025-02-25 21:05:12 +08:00
6fc0b0d4ab
FIX: WebView dragdrop crash on macOS
...
Change-Id: I3019a5c0b010f81ce5dc9be9f61d4a4aa19fd942
Jira: STUDIO-10511
(cherry picked from commit 79f554a3bca5fb7c7a84c8d9ade338a1d0e770a7)
2025-02-25 11:48:03 +08:00
b952006e4d
FIX: prevent dead loop of conflict checker
...
jira: STUDIO-10282
Change-Id: I5722e9967cdd83cde5ef59aee37b0f7019e53d89
2025-02-25 11:48:03 +08:00
26dae21d55
ci: update network module based on commit 373a52c
...
Change-Id: I76e4e62e438699b990bf2666f8e911069afdafc5
2025-02-18 17:19:01 +08:00
a09355018a
ci: update network module based on commit bfc1653
...
Change-Id: I466bd6c027ae43d6539196762d0252ad80626ca5
2025-02-18 17:19:01 +08:00
af22cc2e86
ci: update network module based on commit 697cb83
...
Change-Id: I49ad99b6cad5b7a8cb905c46805d4861b07654bc
2025-02-18 17:19:01 +08:00
d525fad793
ci: update network module based on commit 913a549
...
Change-Id: I28ade05c21275155c7740da4ccc20586fbd04ea3
2025-02-18 17:19:01 +08:00
787d41717c
ci: update network module based on commit 0ad2a06
...
Change-Id: I6cee6cf44eabc264e85f5f15bf4eea20d6972588
2025-02-18 17:19:01 +08:00
a2223f4841
ci: update network module based on commit eae0ad4
...
Change-Id: I31d92a9f6a6e62ea780bec7aa4d4ab772969ddf5
2025-02-18 17:19:01 +08:00
20aa99863e
ci: update network module based on commit 4e8241c
...
Change-Id: I3782d8bbbc72bd0cf5a9533a2b7b3b3dfa855ef7
2025-02-18 17:19:01 +08:00
2eace660e8
ENH: add limit for smooth_coefficient
...
Jira: 10274
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9e288de79b38af6baf93263ccbb452c8996430ba
2025-02-18 17:19:01 +08:00
f88395c347
ci: update network module based on commit 1bc79c1
...
Change-Id: I44d08023133bdc6ab894d35f283e9939bae6343f
2025-02-18 17:19:01 +08:00
4e38cd7a9e
ci: update network module based on commit 9104f26
...
Change-Id: Ideb45bb05d92df6057a32728a498be8896bf02c1
2025-02-18 17:19:01 +08:00
5c8b074b26
FIX: enable verify host
...
JIRA: PSIRT-83
Change-Id: I033b388ef5721f29cd41e1a7bbbca37dd06e6694
Signed-off-by: Stone Li <stone.li@bambulab.com>
2025-02-18 17:19:01 +08:00
4dbd4134a2
ci: update network module based on commit 1eb1a7c
...
Change-Id: Id2dc281eac3ca58da1d74dbe132e0a0b14c4b5e9
2025-02-18 17:19:01 +08:00
cd2558d303
ENH:no longer auto connect to LAN mode printer when Studio starts
...
jira:[STUDIO-9957]
Change-Id: Idba7814460e896b4c58745aeddd9e03cdbaf2e04
(cherry picked from commit 043dde2fbb75a974ce65f985d228fdc856471278)
2025-02-18 17:19:01 +08:00
da8474882b
FIX: no infill in raft layers
...
jira: STUDIO-10175
Change-Id: I96cd7b0ae5a5f030cda3e3ea71c7c56b1752357a
(cherry picked from commit efa4114715f162c8e6714fbe2804620da7aaa1bd)
2025-02-18 17:19:01 +08:00
212f757c51
FIX: CLI: fix the stl name not correct issue when using export-stl
...
jira: no-jira
Change-Id: I5cd83c9fb787416d5045470025fa96696d8bfab9
2025-02-18 17:19:01 +08:00
e1819e65f9
ci: update network module based on commit d5c4c05
...
Change-Id: I9144bc648d7b68b095d816cd9539e9b83e2ef302
2025-02-18 17:19:01 +08:00
b5c3ad305d
ci: update network module based on commit c4a259d
...
Change-Id: I26542e10f9cda838f6f9d8e944ed0a547b88a491
2025-02-18 17:19:01 +08:00
b45d8751d8
ci: update network module based on commit 425e947
...
Change-Id: I089961aa884456b99315127977685a89dd0405f3
2025-02-18 17:19:01 +08:00
54bb25fb24
ENH:optimized the display of amslite
...
jira:[STUDIO-10107]
Change-Id: I3611c39fedba59d19befeee9993b97c2c0862f3f
2025-02-18 17:19:01 +08:00
64c9c72128
FIX:fixed the issue of project page not refreshing in macOS
...
jira:[STUDIO-10110]
Change-Id: I2d137d7f34dbdb1dc0ffbdecbde530fbce969167
2025-02-18 17:19:01 +08:00
fb9b23f894
ENH:allow files with a 3MF extension to be downloaded
...
jira:[none]
Change-Id: I0427efc5e4fc493105b1b31ed6eef08e7f2d0c8d
2025-02-18 17:19:01 +08:00
4ac85b80bb
FIX: CLI: fix the crash issue caused by missing filament_id in some 3mfs
...
jira: STUDIO-9898
Change-Id: I5201e25d899961c97722035f616b4db19d531457
(cherry picked from commit 2d511cb65f619d36d747531bab7dde9d9fdfb037)
2025-02-18 17:19:01 +08:00
5b8007e9d8
ci: update network module based on commit 69643e6
...
Change-Id: I9d0d5ef718dbd6449e8f1e50f13dd0170586c15d
2025-02-18 17:19:01 +08:00
134154a0c9
ENH: CLI: exclude the time of erFlush from main_predication
...
jira: no-jira
Change-Id: Ie069fd957227c50619613a50ed5425b00efa4133
2025-02-18 17:19:01 +08:00
7020256f59
ENH: seperate flush time from other types
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4cfeaec770de678b8dac405617b32738a3f68b3d
2025-02-18 17:19:01 +08:00
093a7c25cb
FIX: gui: fix the crash issue when close guide frame at the beginning
...
jira: STUDIO-9941
Change-Id: I47e189e838ae606d294d0c0b4ccffc6f833a27c3
2025-02-18 17:19:01 +08:00
da0fe0b4e2
ci: update network module based on commit ca9f6c7
...
Change-Id: Ic25d76fcb22f6464f63c73d2fb103101734702eb
2025-02-18 17:19:01 +08:00
be912aa84a
ENH:not allowed to map to empty slots
...
jira:[STUDIO-9901]
Change-Id: I98e2ad72b957bd6c42f6baa765a181aebaf81f1a
2025-02-18 17:19:01 +08:00
a3bed72e34
ci: update network module based on commit 97425f0
...
Change-Id: I857f17168c27704999f964d27bd40f183e74910d
2025-02-18 17:19:01 +08:00
5f0945772c
ENH: add studio unsigned msg dialog
...
JIRA: no-jira
Change-Id: I3a4cd03a58d52a725fc5b29c8da7c6d74a00b227
Signed-off-by: Stone Li <stone.li@bambulab.com>
2025-02-18 17:19:01 +08:00
ade834424d
ci: update network module based on commit 387c55a
...
Change-Id: I393038427715add61dbcf391cae127ebcb9cbcf3
2025-02-18 17:19:01 +08:00
640102316d
ENH:dynamically check the installation of the farm software.
...
Change-Id: I2c0d52498c067b9494ffc2b75b0f4390e2851e0c
2025-02-18 17:19:01 +08:00
793a8e22fa
NEW:support sending 3mf to farm software
...
jira:[none]
Change-Id: I16874751acdaba78194fb597bb6e5bb0a18bc7d7
2025-02-18 17:19:01 +08:00
4905afe6c2
FIX: CLI: fix the compiling issues casued by variable name changes
...
jira: no-jira
Change-Id: I9ec8d637d45c8f932c3e2bdbf13cfc19a82b3680
2025-02-18 17:19:01 +08:00
866fa230ed
ci: update network module based on commit ac0f9cf
...
Change-Id: Ibc6fac5c9c4fbb943817d8ce55291f488a8477b3
2025-02-18 17:19:01 +08:00
e3314ab6a1
ENH: cli: add more information into result.json
...
jira: no-jira
Change-Id: I59d5a249663f79bfd3fe830abd2587cc9e618593
2025-02-18 17:19:01 +08:00
d6b2ac5e8a
ci: update network module based on commit b6b1716
...
Change-Id: Ic0446de678e9910077c475b5f087d0525b3d8aff
2025-02-18 17:19:01 +08:00
98bfabdd1c
slic3r: Fix PopupWindow dropdown menus do not display #4201
2025-01-14 19:18:59 +08:00
b99bc4164d
slic3r: Fix typo in PopupWindow
2025-01-14 19:18:59 +08:00
d2d9621c9c
Add filament_vendors：FusRock
2025-01-14 19:18:41 +08:00
xun.zhang
zhimin.zeng
lane.wei
tao wang
hang.xu
maosheng.wei
qing.zhang
chunmao.guo
Mack
Arthur
zhou.xu
Bastien Nocera
gerrit
Stone Li
jiaxi.chen
gw0
FusRock