8c1ed01948
FIX: fix the parameter value
...
jira: none
Change-Id: Ie8cc7df76be9179d88cbba6db5fd189b9725cd76
2025-03-24 09:12:13 +08:00
6be306e548
ENH:update image for plate type
...
jira: none
Change-Id: I590bf9d6596ccf5cd6e06844fb3ed247fa526ba6
2025-03-24 09:12:10 +08:00
f3c7411351
ENH: get symmetric pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If428ead5f938ba4735786604468b1540d307142d
2025-03-24 09:12:10 +08:00
5bd2ad1806
ENH: update gcode for X1E
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I161e9c65c24c3e35d2edb026aa9790ce02d9aff7
2025-03-24 09:12:09 +08:00
323aba74f3
ENH: update params for Bambu PETG HF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2eee5275f14f2599aa434379555bee4d1c45f9aa
2025-03-24 09:12:09 +08:00
4dbb770805
FIX: modify the circle compensation parameter
...
jira: none
Change-Id: Ib0290dd0651c6802737407336b1d2838b65496ad
2025-03-24 09:12:08 +08:00
85840593fc
FIX: correct strength_z for filaments
...
jira: none
Change-Id: I5ac7677ad992bc8cbd66af8dadaa04f1887747da
2025-03-24 09:12:08 +08:00
704a4a380c
FIX: Speed is displayed incorrectly in GCodeview
...
jira: none
Change-Id: I15a801c73503c0a3ebda64838fc5f82a4d46458f
2025-03-24 09:11:29 +08:00
f2e861af90
ENH: update chamber temp for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id41f610f5314c82cbebfaa93c9b81fe1f472dc5a
2025-03-24 09:11:29 +08:00
6781a874b5
ENH: update profiles for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I17defcdf2bc665442c2d7c3b9f1922b4b2fe7f4b
2025-03-24 09:10:30 +08:00
0c242ddaaa
FIX: add default value for top/bottom_color_penetration_layers
...
jira: none
Change-Id: I9fce470daf4318ece2313a66670c9ebda7580eff
2025-03-24 09:04:48 +08:00
52e05ed0d9
FIX: fix the error scale of circle compensation
...
jira: none
Change-Id: I5c27ef8312e75666dc1c5c2c7dedf3f7e4831497
2025-03-24 09:04:48 +08:00
a13c472816
ENH: handle legacy for ASA-Aero
...
1.Change ASA-Aero to ASA-AERO
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I49c4c31b9928e07b67b9893a4b204c2418089f17
2025-03-24 09:04:47 +08:00
bc446854ff
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3de9ef68ef727d58adac5c6025e50d1fa318177b
2025-03-24 09:04:23 +08:00
22499a552e
FIX: the timelapse gcode is not generated in spiral vase mode
...
jira: none
Change-Id: Ibb73fab7f51e5a81bd32b6e5df18a095f2aa30d3
2025-03-24 09:04:23 +08:00
69c2947daf
ENH: add new way to set bed temperature
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I99a9f67e9b13b2137ad371b22cf0999ccf9c096d
2025-03-24 09:04:22 +08:00
69edcd530f
ENH: add pla glow for a1 mini
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic24a3909297f863dd2fc6c2239ca5f084bd7abc7
2025-03-24 09:04:15 +08:00
0f6d691597
ENH: update profile for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd5c507c6e9db4a74f68389a9b7ac476679fcc5f
2025-03-24 09:03:57 +08:00
ec2b5bf690
ENH: add skippable part time for other printers
...
1. also add a new type: head wrap detect
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8d3056676958245d44171870b6d21ec0ea8bdfe0
2025-03-24 08:40:49 +08:00
853f899500
ENH: remove bambu tpu 85a temperoraily
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie45b497ad5a838a45e819467944775ffaaf955fa
2025-03-24 08:36:36 +08:00
8d10dcd046
ENH: add profiles for TPU 85A and 90A
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ica88ced8d2e0dbb1bdff0d4b80863bd98102ff16
2025-03-24 08:36:36 +08:00
ff37dbdf79
ENH: remove unused keys in profile
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib54b300a3c10ec45acf4aa842c1162bad5bdb289
2025-03-24 08:36:11 +08:00
2e3edc4518
FIX: wall count fixed && overlapping of interface filling path
...
jira: STUDIO-10419, STUDIO-10420
Change-Id: Ib7274420ceb8149a02e82d896757ce5ace908fb9
2025-03-24 08:35:26 +08:00
fe9073696d
ENH: modify filament config for petg hf and pla basic
...
jira: None
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I46528a07a9e1d3f7422106636b405022811d78e6
2025-03-24 08:35:25 +08:00
6e74a4a77b
ENH: seperate timelapse time in preview
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8cc57c70743019baeabe365dbec73affdf5149fe
2025-03-24 08:35:25 +08:00
3e0b6eb228
ENH: generate framework for all layers
...
jira: none
Change-Id: I95f35ba45fe9f544c53bdf0c5a52a70bd45ee7a9
2025-03-24 08:35:25 +08:00
6e9cb17dd3
ENH: dulicate setting id and error preset file
...
Jira： none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I07e6fe63f7272134f5d113c14bd7b32eb620fa27
2025-03-24 08:35:22 +08:00
82d13205d5
FIX: h2d do not support timelapse in sprial mode
...
jira:STUDIO-10402
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5d012a4665bf5715d90fcb973a589d3a500ded13
2025-03-24 08:34:31 +08:00
fb5bf37336
ENH: change infill params' name
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I864f24a335d59b4ee6ae474c9a338cd2fbc2ebf1
2025-03-24 08:34:31 +08:00
872726abed
ENH: add cross zag pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If11f423db443b3f31f2181d4b0c56eaeb9a7ca5d
2025-03-24 08:34:30 +08:00
09c0b004cd
ENH: update H2D filament retraction of matte
...
Jira: 9900
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9e8f962796b7301fff7c8ae4e74db548771bd14e
2025-03-24 08:34:29 +08:00
16813aa460
FIX: missing gcode line caused by gcode GCodeEditor
...
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
2025-03-24 08:34:29 +08:00
f2cb4f747c
ENH: improve quality of interface
...
1. change type of transition layers below interface to erSupportTransition,
2. fix the number of transition layer above tree branches,
3. change the default setting of support_interface_pattern to smipRectilinearInterlaced,
4. change the default support_style to HybridTree when interface is soluble
5. FIX: conflict between xy_expansion && split_hole
jira: STUDIO-10239, STUDIO-10314, STUDIO-10319
Change-Id: I3eb392ccd005acedb001aa862d5bf3eb104c5293
2025-03-24 08:34:00 +08:00
c7f80cb611
ENH: add some missing change for params
...
1. Add more change for ensure vertical shell
thickness
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0bd575ab3cb314c0276faf9a91da1c7744e66da6
2025-03-24 08:30:17 +08:00
faec4160d5
ENH: change param name
...
Jira: none
change filament category to filament adhesiveness category
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I267d71b2f968becf4e8f434daafdf1a70c36a823
2025-03-24 08:30:16 +08:00
e2f25326c1
ENH: add more process profile for H2D
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia0b3534e6e00d7f231cf759b0045473a3fb66526
2025-03-24 08:29:27 +08:00
f2d9902ff3
ENH: update timelapse for X,P
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I32c8288511da98cc1806697673b476b17556164c
2025-03-24 08:25:45 +08:00
1c8da5f99c
ENH: add timelapse for A series
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9028d7117d1d184a8f7baad0b0ae4492a35481f4
2025-03-24 08:25:45 +08:00
5c3d804b9f
FIX: Detach the timelapse gcode from layer_change_gcode
...
for X and P machine
2. remove lift and retract in filament_change_gcode and layer_change_gcode
jira: none
Change-Id: I3da2d3ac7f0100d1963dcbb1228323666a060534
2025-03-24 08:24:22 +08:00
fff7873456
FIX: enhance for timelapse gcode
...
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
2025-03-24 08:24:22 +08:00
a780ed9e1d
ENH: set default nozzle volume type to standard
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia7c0118f89aee4e55c4c4b466957d80453775237
2025-03-23 20:31:26 +08:00
8e48e10f51
ENH: add virtual nozzle temp command in H2D gcode
...
jira:STUDIO-10104
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I47b083384e6730cf973dc865e821dce3a7e46277
2025-03-23 20:31:26 +08:00
e74c9e710b
ENH:add "not support bed type" function
...
jira: STUDIO-9028
Change-Id: Id1c6cc9005fc5073d885274e360d31282063a9a3
2025-03-23 20:31:25 +08:00
3f2f704676
ENH: add filament category
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0f31a376527bc540d27c49908712d08bdba3d719
2025-03-23 20:31:09 +08:00
be02e769bb
ENH:instead of prime_volume by filament_prime_volume
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I96e7d0604da8f90678feed81833e3a634752ffff
2025-03-23 20:31:05 +08:00
4dd4e9e12c
ENH: enhance some functions of the wipe_tower
...
1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
2025-03-23 20:31:04 +08:00
785e029971
ENH: update custom gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6c69c6ee3cd77c7b82d6b37592e9fc4ebfd539d9
2025-03-23 20:30:10 +08:00
9b46d437ba
ENH: add filament change length for color change
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I84ab638d6af056ede9b9524d1395eb42fa731150
2025-03-23 20:29:39 +08:00
3213963399
ENH: update nozzle volume for H2D
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I21e56af3d4d2d3eb2ec4265ce3f34bac649b18f0
2025-03-23 20:29:35 +08:00
dc81de37fd
FIX:offset error of auto hole-contour compensation
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id806eaab2ddcb44d89ef587765e5396939920f5a
2025-03-23 20:29:35 +08:00
zhimin.zeng
zhou.xu
qing.zhang
xun.zhang
jiaxi.chen
jiangkai.zhao