1864b22478
FIX: gen floating areas when holes of support_area propagate
...
jira: STUDIO-10271
Change-Id: Ib45d78c6f920613ba29cb97cead9192813cbb4fe
2025-03-24 09:12:13 +08:00
e7eb3bd388
FIX: use support_interface_material between support_material
...
jira: STUDIO-10544
Change-Id: Id1bfda49bc5ac2bd6ecbad473d8ee063d3c0f030
2025-03-24 09:12:12 +08:00
7345b0034f
FIX: modify the insert depth value of wipe tower
...
jira: none
Change-Id: I60b453e688b5bd592b6e276621fc9e8ca68c8789
2025-03-24 09:12:12 +08:00
a44da293ad
ENH: CLI: keep the params of old version
...
jira: STUDIO-10695
Change-Id: I4b0a768bc4fc6c856c9c92fa4a05007a3097df35
2025-03-24 09:12:12 +08:00
609a4c0e52
FIX: crash when the wipe tower block is invalid
...
jira: STUDIO-10696
Change-Id: I6e9ff87cfb8cfd2383480248d56b8515d383b11c
2025-03-24 09:12:11 +08:00
c58e5d447d
FIX: fix the unknown object label id
...
jira: 10699
Change-Id: I50b5b230625be8dd0c36b588e6ae9358eef334ba
2025-03-24 09:12:11 +08:00
6be306e548
ENH:update image for plate type
...
jira: none
Change-Id: I590bf9d6596ccf5cd6e06844fb3ed247fa526ba6
2025-03-24 09:12:10 +08:00
f3c7411351
ENH: get symmetric pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If428ead5f938ba4735786604468b1540d307142d
2025-03-24 09:12:10 +08:00
a4388010bd
FIX: fix slice core dumped problem
...
enable timelapse and the first layer has no toolchange
jira: STUDIO-10698
Change-Id: Ia503efe4a143fe98f67cd3913b7745d74b113170
2025-03-24 09:12:10 +08:00
ecb6aff6c9
FIX: the master extruder id is incorrect for custom printer preset
...
jira: none
Change-Id: I4ea27ada6f976f1030acc88f131e77a382ca5199
2025-03-24 09:12:10 +08:00
6869abceda
ENH: add min vitrification temperature in placeholder
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id9da8c829a2ed7469a01a887a0f19b0d32f0c36a
2025-03-24 09:12:10 +08:00
29766420dd
ENH: debug: improve the assertion judge in Point.hpp
...
jira: no-jira
Change-Id: I22b0cd3dc897c5cd05d14273d88f90bdc01ae644
2025-03-24 09:12:08 +08:00
6d51451db1
FIX: modify manual offset
...
loosening when positive and tightening when negative
jira: none
Change-Id: I32fdc2685202ef51af8d7a7b98126d28d2c6647d
2025-03-24 09:11:29 +08:00
f141425fee
FIX: fix the customize compensation bug
...
jira: none
Change-Id: I2165bbecb7cf03888dad00d1fc76ee74bd2b0fc0
2025-03-24 09:11:29 +08:00
d77848fa9f
ENH: don't generate bottom interfaces for tree support
...
Previously we set bottom_z = 0 when soluble_interface is true and generate
bottom interfaces for tree support. This may cause tree supports unstable.
Now all tree supports will have no bottom interfaces.
jira: STUDIO-10505
Change-Id: I3c74f98fc171d28ff24ace3fd594ef5c925ff34d
2025-03-24 09:11:29 +08:00
1a240e5d14
ENH: add some change for translation
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I58ded926c8525e261bb1c7518562c9276afc1409
2025-03-24 09:11:28 +08:00
99af2382c4
Fix: modify tpu travel speed to 2 times
...
because of 2x nozzlechange width
jira: none
Change-Id: I3a9af777551c54b8bac273bf1f6e06c9f36673bb
2025-03-24 09:10:29 +08:00
d5b570d8dc
ENH: adjust wipe_tower depth interpolation
...
because [0,0] will cause the wipetower to disappear in low-layer-height models with enable smooth timelapse type.
jira: none
Change-Id: I6fe3d4128e9b284ae7660f7e0f9f8b62f74cf427
2025-03-24 09:10:29 +08:00
9f060f9135
NEW: cherry-pick rendering-stuff to github branch
...
jira: no-jira
Change-Id: If615d572b2021e707cc9ff037fefeabf46dacfa4
2025-03-24 09:04:57 +08:00
3366b13fd6
FIX: wrong number of outer_walls
...
1. when some area is need_extra_wall, the whole layer has double walls.
2. set circles above soluble interface with double walls
jira: STUDIO-10505
Change-Id: I5846c712a36e2e5bfc5018013b44e2712229b6ad
(cherry picked from commit 5675d9c14e57c4615249ec665603dd662a9a7ee3)
2025-03-24 09:04:49 +08:00
66d8c73275
FIX: the circle parameter is filament parameter
...
jira: none
Change-Id: Ifcf26f0a8ace77392094f05eecc03ed664d67f5c
2025-03-24 09:04:49 +08:00
b2f32e5010
FIX: wrong value in param
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3521005617f414f57247599f3211e87f576a28e5
2025-03-24 09:04:48 +08:00
6e312e2027
ENH: add circle parameter for posSlice
...
jira: none
Change-Id: Ib95f2a2de4251f8dcf419e2241d83c9095651382
2025-03-24 09:04:48 +08:00
52e05ed0d9
FIX: fix the error scale of circle compensation
...
jira: none
Change-Id: I5c27ef8312e75666dc1c5c2c7dedf3f7e4831497
2025-03-24 09:04:48 +08:00
c782fbb8d9
ENH: Separate the number of color bleed layers from top_shell_layers
...
jira: none
Change-Id: I32c14be306ad3fa5970f8c8af8622e086cbca3d9
2025-03-24 09:04:48 +08:00
a13c472816
ENH: handle legacy for ASA-Aero
...
1.Change ASA-Aero to ASA-AERO
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I49c4c31b9928e07b67b9893a4b204c2418089f17
2025-03-24 09:04:47 +08:00
e79ba2f1ec
FIX: wrong bed temp in placeholder
...
1.Also add a new field to mark whether enable high low temp mix
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I208e0e7a4ce75feccc8659ecf940447e591d9505
2025-03-24 09:04:47 +08:00
43617a96df
FIX:add "Slic3r::Emboss::union_with_delta" api for single ExPolygons
...
and add_indice api
jira: STUDIO-10576
Change-Id: I85086552bb7eec0118e00299d4c07fbde7cc4aed
2025-03-24 09:04:47 +08:00
01918affdf
ENH:fixed incorrect prompt for glow material
...
jira:[STUDIO-10574]
Change-Id: I4475eb527ffbc8cc6d72405445552971d062b45e
2025-03-24 09:04:47 +08:00
5728474378
FIX: dont need roof1stlayer if there is no roof above
...
jira: STUDIO-10573
Change-Id: Ie6ef6e3321f076511f0caf24b906f75761aacfc8
2025-03-24 09:04:23 +08:00
1a58c3f1c8
FIX: when params change, clear detected overhangs
...
jira: STUDIO-10575
Change-Id: If38fc21a97657980b4dfae17699f3fb41a46fa0a
2025-03-24 09:04:23 +08:00
01460cae76
ENH: support skip timelapse gcode when skip all object
...
jira: none
Change-Id: I31586b1885e92e0eb0005b458e1dbc19f945a929
2025-03-24 09:04:23 +08:00
56a7d295c7
ENH: enhance check for only one wall top
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia5f326416516a73111e37ba75bc673e69f0f99a5
2025-03-24 09:04:23 +08:00
22499a552e
FIX: the timelapse gcode is not generated in spiral vase mode
...
jira: none
Change-Id: Ibb73fab7f51e5a81bd32b6e5df18a095f2aa30d3
2025-03-24 09:04:23 +08:00
69c2947daf
ENH: add new way to set bed temperature
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I99a9f67e9b13b2137ad371b22cf0999ccf9c096d
2025-03-24 09:04:22 +08:00
4fadeab450
ENH: Modify extra_rib_length can be a negative value.
...
jira: STUDIO-10535
Change-Id: Icd6134a96c1f32111f908e87acda8c5132dcd73c
(cherry picked from commit cbf4b3eafff29ad961deec6acad5104e34a57481)
2025-03-24 09:04:22 +08:00
8d32d29016
Fix: crashes when slicing small objects with wipe_tower.
...
jira: STUDIO-10572
Change-Id: I37312673a87e542120ee7282c22f80e16c894cd9
2025-03-24 09:04:22 +08:00
e71adc067c
ENH: set max prime_tower_extra_rib_length to 300
...
jira: STUDIO-10569
Change-Id: Iad518db29206d16bb59b5a938623d351862a190a
2025-03-24 09:04:22 +08:00
f61beec992
FIX: fix for the previous changes
...
1. keep growing when collison do not contain the circle of the node.
2. when contact_node is nullptr, cannot assign it a type.
jira: none
Change-Id: I6168a3a19ceec087e93c919625c0c3b654fc7d7e
2025-03-24 09:04:22 +08:00
d9ad4e81e9
NEW:Add pre-start fan gcode for overhang lines.
...
when encountering overhang paths and the current fan speed is low, the fan is set to start 2 seconds earlier by default. This prevents cooling issues caused by delays in fan acceleration.
Change-Id: I9e9267b77f1e4d9a2b81bda16c1441703a7b28e7
2025-03-24 09:04:15 +08:00
bcbb08c303
FIX:HeightRange must use world cs
...
jira: none
Change-Id: Ib0d1efa0a5b2f389d3ec0ff68f82af503084605a
2025-03-24 09:04:15 +08:00
ca5ec101f9
FIX: the nums of filament_type in plater config is incorrect
...
2. Improve the judgment and display of the extruder printing area
jira: none
Change-Id: Ie9e1991904bfbc5bffceedb7810b1d1fa598933b
2025-03-24 09:04:15 +08:00
6266a987d4
FIX: first layer overlaps
...
still need to check if layers' bottom_z is under initial_layer_height since z_heights[0] is fixed to it.
jira: STUDIO-10282
Change-Id: Ia2d0565039389c8eb7edbb6b5403996b5ee412c2
2025-03-24 09:03:27 +08:00
f65f5fc208
FIX: Rectilinear Interlaced pattern not working
...
Rectilinear Interlaced interface pattern not working for normal support.
jira: STUDIO-8847
github: #5307
Change-Id: Ia17c9a0f8f20e3ac7a98ce13b1ea5065c200ac3a
2025-03-24 09:03:27 +08:00
e684f8fcc6
FIX: wipe tpwer should be no_brim_area
...
jira-id: none
Change-Id: Ia8b9c1639a62d90421932594b3709eba71b5e723
(cherry picked from commit 68eb40bc74d75fece451ed3b4b4b767b46c238b3)
2025-03-24 09:03:27 +08:00
7e0078b24e
FIX: add gcode reserved tag
...
and fix block.finish_depth error
jira: none
Change-Id: If272b181430aa79a88ff0cb79670cf2c62a06020
(cherry picked from commit 0f4516f78186fb2a13b245eb38d13dfc2fce8bfc)
2025-03-24 09:03:27 +08:00
03c5905608
FIX: Int32 out-of-bounds problem
...
jira: none
Change-Id: I1dfc611b214e6e4c6641b8de90920e5a5881373f
2025-03-24 09:03:26 +08:00
adb3fbcfcf
Fix: only one overlapping area can be added to cluster
...
1. Wrong generation of cluster when there are multiple overlapping areas in one layer.
2. set interface_bottom_spacing = interface(_top)_spacing.
jira: STUDIO-10241, STUDIO-10506, STUDIO-10507
Change-Id: Ic7a0d61e43c5cd8d8094cb75ac257f83bc2952b6
2025-03-24 09:03:26 +08:00
2421cd430d
ENH: update translation
...
jira: none
Change-Id: Iceeaf2d9bb93fcee4fadfdfc2a5f1f7ab4a0b684
2025-03-24 09:00:57 +08:00
81ad7bdde0
Fix: modify the rules of get_wall_filament_for_all_layer
...
jira: none
Change-Id: I6e8655105470dc3eef291d4b6ac1c4447092b21a
2025-03-24 08:40:50 +08:00
jiaxi.chen
zhimin.zeng
lane.wei
zhou.xu
qing.zhang
xun.zhang
Arthur
jiangkai.zhao
jun.zhang
tao wang
lingdong.gu
wintergua