Jira: none
generate continuitious outer wall speed in z dir
generate continuitious layer time in z dir
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0ade543d2f9ee40f5cd65c533eb261d85e5eaa34
1.Caused by missing break of switch case
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie667eda4069f3e2487ed87081580e2540ae4da7b
The existing implementation did only read the new Z position from the injected timelapse_gcode and flagged the position as unsafe because of this.
This change reads X, Y and Z pos from the timelapgse_gcode and will keep the position state correct to enable safety checks required for using spiral Z hop.
Because of this, spiral Z hop can be used everyhwere now. The same pattern is also applied for layer_change/toolhead gcode injection.
The set_current_position_clear method is unused but will be kept in implementation for future scenarios.
I found a use after free bug in LinesBucketQueue::emplace_back_bucket. This was found by enabling address sanitizer.
The LinesBucketQueue class has two related members:
std::vector<LinesBucket> line_buckets;
std::priority_queue<LinesBucket *, std::vector<LinesBucket *>, LinesBucketPtrComp> line_bucket_ptr_queue;
line_bucket_ptr_queue holds pointers into line_buckets. However, since items are inserted into line_buckets one at a time, existing pointers that were stored inside line_bucket_ptr_queue become invalid. Specifically:
void LinesBucketQueue::emplace_back_bucket(ExtrusionLayers &&els, const void *objPtr, Point offset)
{
auto oldSize = line_buckets.capacity();
line_buckets.emplace_back(std::move(els), objPtr, offset); <--- Causes a reallocation, making previous pointers invalid
line_bucket_ptr_queue.push(&line_buckets.back()); <-- priority queue compares against old, now invalid pointers
...
The proposed fix is to calculate the required number of entries in ConflictChecker::find_inter_of_lines_in_diff_objs, and then calling line_buckets.reserve(count). This ensures that sufficient buffer is allocated up front and the pointers are stable as items are added.
1. Only set the filament id in map when flush length is not 0
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
1.Fix filament can not map if it's not used in model body
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibd2685ffd198b2e17dbf44289d0144b5b7c25788
Github: 2744
* Practically full re-write of spiral vase
- Adds transition out to prevent sharp edge at the top of spiral vase.
- Adds XY interpolation
- Adds option to turn XY interpolation on/off
* - Increasing E to 5 decimal digits (I observed uneven flow with less than that)
- Excluding all travel moves (I saw a bug where somehow we ended up with travel moves within the print so excluding all travel moves)
* - max_xy_smoothing is now configurable, default is 200% of nozzle_diameter
- fixed no-op travel moves in the middle of spiral that now show up as defects when Smooth Spiral is enabled!
* - Avoiding namespace pollution
- Fixing dist_XY == 0 bug
---------
Co-authored-by: Andrew Boktor <aboktor@microsoft.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Change-Id: I4e982b6192f730037ff497389454313af3905e82
1. Add wipe tower role cache in GCodeProcessor result
2. Add wiki link for prime tower
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia766c7218df68fb1ffba567af193d6bfecacf588
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
Jira:none
BBL:Merged scarf seam and
add imorovemnt to improve seam on defalue setting
--as default setting wipe before rectract get good seam on end
--clip slope at start and end
--clip more on inner wall slope start than outer wall
--slowdown slope speed to get better sea
--todo-slope path had error double dE
reduce it could improve seam,but slope could not stick well.
--check slope path overhang and avoid it while on conditional scarf mode
Co-authored-by: qing.zhang <qing.zhang@BambuLab.com>
Change-Id: I583a1c25e534b2aa5c9d710dcf207aefbea64347
/Users/ci.slave/slicer/patch_build/1/bamboo_slicer/src/libslic3r/GCode/GCodeProcessor.cpp:486:33: error: cannot pass non-trivial object of type 'std::string' (aka 'basic_string<char, char_traits<char>, allocator<char>>') to variadic function; expected type from format string was 'char *' [-Wnon-pod-varargs]
get_time_dhms(machine.time));
^~~~~~~~~~~~~~~~~~~~~~~~~~~
github pull request: https://github.com/bambulab/BambuStudio/pull/3360
Change-Id: If13ee145b20ef9532b23a58bb3b0a29f30d8c0a8
Change-Id: I98fd87417c432c3afae67a3d2bc29c79f8bffa3c
1. Add a option to prevent support interface filament being used in
support body
jira:STUDIO-4847
Change-Id: Ic6e9f663b71a7e4d9cd1bca399c0da2ce22bb5b5
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
1. Add bed macth result after doing gcode export,according to filaments
used in first layer
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icf70fce0310b86fffc5276fb8fb3bf4cc14afcb0
1. refine some tip
2. alert when bed temperture greq than softening temperature
jira: STUDIO-4532
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib9623553a40825015744783f30c6e439827a49c6
when the first support interface layer is default color, and the support filament is different
Jira: XXXX
Change-Id: Ibec1eb266ca86947cb56f7bfb4546569f66b1036
adaptive layer height won't work with conflict checker because m_fake_wipe_tower's path is generated using fixed layer height.
Jira: STUDIO-4442
Change-Id: I964a69af2fa0be8224ffc11e4c86f8ccf6dbf152
(cherry picked from commit e8c915f9e0b8c8f6cb549259b20d6d850a06d7d3)
in brim generation, object's first layer extruders are obtained from regions.
If the extruders are changed at certain layers in by layer slicing mode,
the extruders from layer regions are not right.
this patch fix that issue by updating the extruder overridding in
a new member "object_first_layer_wall_extruders" in "print_object" class during
constructing "Tool_ordering" class. then using the new member directly when generating brim.
besides, support contour, which should be no_brim_area, is obtained from "support_infills" instead of "lslices" of "support_layers"
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4332
Change-Id: I271d0ea0d8c01c412d4fb9ade5296c6a6471aed6
(cherry picked from commit 9919ce9d1b9105b859273eee4fe9481c4dff6189)
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
so that it does not decimate all triangles on very high detailed models
Relevant issue 8834 Access Error when slicing
Github: #2283
Change-Id: I047361c88c561962ef4d3cf67bc0126402c41941
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
What: As title. The original code is always apply
at the end of last object of last layer, whichi is before
layer change
Why: the fan spped will be skipped if the last object is
skipped. So we must move the layer time fan speed setting
after changing layer, where is common gcode block and does
not belong to any object.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I442f80e00778b524576210b451f81dd15e25e14c
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
The print z was wrong previously when there is a wipe tower, or there
is an object with floating parts.
Jira: STUDIO-2719
udesk: https://bblcs.s5.udesk.cn/entry/ticket/show/2258732
Change-Id: Ifa070aeb548d692549cf88df0d405ecdf0160c80
(cherry picked from commit be3097d8044ce9e0079ebf7070b15c7aad7aff0e)
Little overlap of support lines from two objects are allowed.
Change-Id: I738874ee71fc9787abbef764dbad762c76bc5731
(cherry picked from commit a5f7a53dc818d598523149d675fd0310f5d22f86)
Also fix a crash bug due to setStarted and setDone.
Change-Id: Ib9b069fe4b7e5d1fc359f48e44b4032dd8249428
(cherry picked from commit 9ef190ed3ecd66d12617ad96e927ff34251395a2)
1. add gcode conflict checker
2. add a new command line option: --no_check. When it's provided, gcode
conflict check is skipped.
Change-Id: I6feafca8c5fa6c3c5eae1f0e541ce59d2f03dedf
(cherry picked from commit 5a39afb64e826a960d9673dcada89d02d62b3911)
Fix for floating layer under multi-color
printing while z_hop is zero.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8cc96bd18020cac8424fe4c3e62fb87da118b826
"std::cout << float number" is unsafe which
may use , as decimal point when switch language.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8a379117168eab0111dc93987b1d6130a741ade6
This reverts commit 9e026a289542545d5f63cd72fb9416be1521ecc2.
This Revert "ENH: STUDIO-2221 adjust cooling time for each layer"
This reverts commit eb1fa5975eb7dc3ff832539e9bec5a04515ff2f9.
Change-Id: Iba8d0a1492b81922aad0d64df81c74cff5eabbb3
sub filament change time from layer time to adjust
layer speed
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I2f1c41a36946765b74ecad58ce102abe98e00dac
When using "Flush into objects' infill" with support filament, it also get's flushed into the object's infill which shouldn't be happening.
Change-Id: I0f1cb3d5ee3cf5489ccab957989c6c24336f8845
(cherry picked from commit f83e63feb3ad5a14b0f4304e2e6fb1c5828270ec)
Using layer z to calculate total layer number is not
precision, because for some models with sharp top
layer, the top layer may be empty.
Check the final layer change in final gcode file.
This must be same with total layer number.
Jira: Studio-2123
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5d001a8bb9548c3fb5f67fda966051ac3bb16502
Seperate travel time from extrusion role time and
show it seperately.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Icf0aaf63c4d4ed7d1407037e5ae051d61938f973
This reverts commit 1e95803df3733021e80241ecf7b88976708f0cf7.
Reason for revert: some model test not good, need to update curve function
Change-Id: I6afd6115d21198f60453d4f507905b6684a65cff
1. fix the thumbnail white issue in some random case
2. fix the thumbnail not update issue under preview panel
3. fix the previous panel's toolpath not clear issue while switch panel
under preview
4. fix the toolpath not clear issue while switch from 3d to preview in
some corner case
Change-Id: I158eba35e3b5d8a1e77f19ee9f86801e6a6dbd86
Should not insert new line in post process
which changes the the final line id in gcode
file
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib8b837cf313a1308260db88bf5390fefe9708cc8
When travel in x-y-z move, the acceleration should
be limited by trivector rather than one axis.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If8e5d394cf5d8772d324b9c851c047d9235d9b6b
when support material is used in first tool change
Change-Id: If06459b8404fd599b42187859f476efded57deba
(cherry picked from commit 71f9ed69a3eff4cf3139d04a76176f798a1e1e0d)
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
Copied objects share extrusion paths but they should be treated
seperately.
Thanks hisptoot for the fix.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I24d3050df7d284e92fc50a0213023a43ee8c529c
Add bed temperature checker in gcode processer. And
save slice warning into GcodeProcessorResult.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iee96e4ab165a3171a5a1e165450bfc360401647f
Provide related two options to avoid crossing wall
when travel.
This is handling for github issue #106
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I127adbb70f33c3954a08f3087e64c4e75212c7f0
During filament changing, additional cooling fan may
be closed to reduce strings. Force to resume after
changing filament.
This logic is same with part cooling fan.
So no side effect.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I207c8692dbe5b0450ed0a3d11c4c9b70eda0e28c
Fix the issue that the first 2 layers of prime tower are not generated
when timelapse is set to smooth mode. This issue only happens in single
filament printing.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
All extruder offset should be extruder_offset[0] when
it is single extruder multi material.
Add handling when load config from gcode.
This is fix for github issue #213
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia881b2bfbbdffa98e3c3db7b35201dc86b520b29
1. memory explosion when enable timelapse.
2. Models with only one color become multicolor after slicing.
Change-Id: Iab3ace70c08d03ab612158d52ff67eef8d5bc718
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
qing.zhang
zhimin.zeng
xun.zhang
lane.wei
SIMPLE MARK
ziehmon
Momin Al-Ghosien
andrewboktor
tao wang
Leon Fisher-Skipper
Noisyfox
Dmytro Chystiakov
Bastien Nocera
Arthur
wintergua
PavelMikus
salt.wei
manch1n
maosheng.wei
liz.li
SoftFever
SoftFever
Zhaofeng Li
Stone Li
yifan.wu