5e93d4c16c
FIX: the flow calibration of X1E
...
jira: [STUDIO-10784]
Change-Id: I508435efa74a0678ecf5e99f69813b2265bfb32c
2025-03-24 09:17:00 +08:00
eead62bd2e
ci: update translate file 2025_03_14_16_48_46
...
jira:none
2025-03-24 09:17:00 +08:00
d17f558610
ENH: update H2D start machine gcode
...
Jira: none
extrude 5 mm in place before drawing the pre-extrusion line
to ensure the filament stick to bed
add a dirty detection feature for carmera
support dual-head high-low temp check
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia365d99fe764acf4815d24cfb96532b6f1d79990
2025-03-24 09:17:00 +08:00
8763497773
ci: update translate file 2025_03_13_18_12_27
...
jira:none
2025-03-24 09:15:33 +08:00
a137a440bc
ci: update translate file 2025_03_13_17_14_55
...
jira:none
2025-03-24 09:15:32 +08:00
98dad923f8
FIX: dark mode in filament group pop up
...
1.Also modify some tips
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4e2abfe24afdf7f0d728a486aa248b8e5accbdf4
2025-03-24 09:15:32 +08:00
cf2c64ca97
ENH:add svg for cross zag
...
jira: none
Change-Id: I19480fadaf6236c0d2a60f158f2ff9a78f028340
2025-03-24 09:15:31 +08:00
94ceedf97f
FIX: fix plater UI
...
Jira: 10520
Change-Id: Iec4401862d1c28df45067dc9b545dafe1341eb35
2025-03-24 09:15:31 +08:00
ccf58b3fc6
ENH: set cooling/heating rate as extruder param
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia5eb6ba5bea0351ebcc3867644a518fb5560e500
2025-03-24 09:15:31 +08:00
aaff1d6bd0
Revert "ci: update translate file 2025_03_12_20_15_24"
...
This reverts commit 7c29c7b82de953d5c52afb137bd0de7db94fd33a.
Reason for revert: test
Change-Id: I02247b93d2eed831874ec2062ed68a731814dc6d
2025-03-24 09:15:30 +08:00
fa9da1215b
ci: update translate file 2025_03_12_20_15_24
2025-03-24 09:15:29 +08:00
3bd7bee743
FIX: update the plate check texts
...
jira: [STUDIO-10813]
Change-Id: I0304908f7819be1482744e253332bfca1044732e
2025-03-24 09:15:29 +08:00
11ba41c7ab
ENH: sync timelapse gcode for h2d
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I304410a6265e8ab4bb16435cb1c21f906c355e76
2025-03-24 09:15:29 +08:00
7bcc83682e
FIX: dark mode display in dialog
...
jira:STUDIO-10811
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I174541d97efe8d0beea4913d23375f82b104b7a2
2025-03-24 09:15:29 +08:00
05cc1ae808
ENH: update gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iea232e323b7859affe217d86f685db2d7e997a4d
2025-03-24 09:15:29 +08:00
f2f6b29023
FIX: update the support of nozzle offset calibration
...
jira: [STUDIO-10758]
Change-Id: I34246998b08c54ef8e44172300ab3e1d4e4bf5c4
2025-03-24 09:15:28 +08:00
f38d8f959f
ENH: some tpu filaments are not support auto cali
...
jira: none
Change-Id: I253e5c5936bc5fb90612f385e358b3015bdabf2e
2025-03-24 09:15:28 +08:00
40654323b0
FIX: opposite value for detect floating vshell
...
1. Also add default values in profile
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I70eb017a63fa55b40f3f62b4f31da0179ebc5abc
2025-03-24 09:15:28 +08:00
57245bd456
FIX: update the flow calibration options
...
jira: [STUDIO-10784]
Change-Id: I75c5319daf01da52ae521632d71d32813bcbb32f
2025-03-24 09:15:27 +08:00
7239f7bfaa
ENH:add "reset all" function
...
jira: none
Change-Id: Iac2c267e95ca0589bf2e6d6d536d70d3b3e4a70c
2025-03-24 09:15:27 +08:00
08c0016187
FIX: Default Choose BBL Model
...
JIRA: none
Change-Id: Id9862632c3983faf1cb01f5b798fd94f49b80f9d
2025-03-24 09:15:23 +08:00
c8ceb4ba38
ENH: add x1 in bambu pla Lite
...
1.Also modify max flow v
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4dc196c452ed1f72119103adfa1e0567ecae4c9f
2025-03-24 09:14:26 +08:00
2581925e4b
ENH: add profiles for Bambu PLA Lite
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2072a34ee5614f702eced636e163e8d06eb07279
2025-03-24 09:14:22 +08:00
8c1ed01948
FIX: fix the parameter value
...
jira: none
Change-Id: Ie8cc7df76be9179d88cbba6db5fd189b9725cd76
2025-03-24 09:12:13 +08:00
4e989fa97f
ci: update translate file 2025_03_07_15_28_27
2025-03-24 09:12:12 +08:00
f5c49c89a8
FIX: update the extruder image in status panel
...
jira: [STUDIO-10732]
Change-Id: I5437c4ef1538f0022f97c7ef7fb40ec2242328ed
2025-03-24 09:12:11 +08:00
8b237bf959
FIX: update the mapping item
...
jira: [STUDIO-9942]
Change-Id: I5b46fb530f08d0de4c8cf5a23707ec539d82356d
2025-03-24 09:12:11 +08:00
cab351837e
FIX: silhouette shader
...
jira: STUDIO-10736 / STUDIO-10723 / STUDIO-10720
Change-Id: Id4335e53bb80fa6f9c0404a0d0de6b530ff9f691
2025-03-24 09:12:10 +08:00
6be306e548
ENH:update image for plate type
...
jira: none
Change-Id: I590bf9d6596ccf5cd6e06844fb3ed247fa526ba6
2025-03-24 09:12:10 +08:00
f3c7411351
ENH: get symmetric pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If428ead5f938ba4735786604468b1540d307142d
2025-03-24 09:12:10 +08:00
2a551af40a
FIX: update hms files
...
jira: [none]
Change-Id: I9fc34829b89c2cac4e2bbd0719a25295de339aa6
2025-03-24 09:12:09 +08:00
5bd2ad1806
ENH: update gcode for X1E
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I161e9c65c24c3e35d2edb026aa9790ce02d9aff7
2025-03-24 09:12:09 +08:00
323aba74f3
ENH: update params for Bambu PETG HF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2eee5275f14f2599aa434379555bee4d1c45f9aa
2025-03-24 09:12:09 +08:00
219712788a
ENH: silhouette effect
...
jira: no-jira
Change-Id: I1aca7242e87f15582384e4250b6329cdd0a48a69
(cherry picked from commit d141f81dc52eca0ac04aa17e26edf0005e82a6f9)
2025-03-24 09:12:09 +08:00
1d5b02989b
ENH:Optimize the display effect of overhang areas
...
jira: STUDIO-10685
Change-Id: I0354d66ca7ba3efbe507b044c3c8a9125020f013
2025-03-24 09:12:09 +08:00
4dbb770805
FIX: modify the circle compensation parameter
...
jira: none
Change-Id: Ib0290dd0651c6802737407336b1d2838b65496ad
2025-03-24 09:12:08 +08:00
85840593fc
FIX: correct strength_z for filaments
...
jira: none
Change-Id: I5ac7677ad992bc8cbd66af8dadaa04f1887747da
2025-03-24 09:12:08 +08:00
704a4a380c
FIX: Speed is displayed incorrectly in GCodeview
...
jira: none
Change-Id: I15a801c73503c0a3ebda64838fc5f82a4d46458f
2025-03-24 09:11:29 +08:00
f2e861af90
ENH: update chamber temp for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id41f610f5314c82cbebfaa93c9b81fe1f472dc5a
2025-03-24 09:11:29 +08:00
bf3b02ebde
ENH: update translation
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia3155e793b498cdf2c6e28bbe04e004d0aace22d
2025-03-24 09:11:28 +08:00
4a395a9708
ENH:update local hms file
...
jira:[none]
Change-Id: I3fe669148a885de6e7d1f20024c650cb19a0f8f4
2025-03-24 09:10:30 +08:00
6781a874b5
ENH: update profiles for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I17defcdf2bc665442c2d7c3b9f1922b4b2fe7f4b
2025-03-24 09:10:30 +08:00
c3643fdec9
ENH:support checking blacklists for specified models
...
jira:[none]
Change-Id: Icd88c478a04e8743cdaaa8d670f238b534e40283
2025-03-24 09:10:29 +08:00
998d0322d1
ENH:overhang use chess to render
...
jira: none
Change-Id: I6acf6046a57c6378de2dbe0f0d831d50cef595e5
(cherry picked from commit 3fc313b3dd9d39340907fbfe7dd48f710169e3ca)
2025-03-24 09:10:29 +08:00
9f060f9135
NEW: cherry-pick rendering-stuff to github branch
...
jira: no-jira
Change-Id: If615d572b2021e707cc9ff037fefeabf46dacfa4
2025-03-24 09:04:57 +08:00
0c242ddaaa
FIX: add default value for top/bottom_color_penetration_layers
...
jira: none
Change-Id: I9fce470daf4318ece2313a66670c9ebda7580eff
2025-03-24 09:04:48 +08:00
85691a07f5
ENH: update translation
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I718e86df8b39eeb7f7fcd5e93265d59846c4867d
2025-03-24 09:04:48 +08:00
52e05ed0d9
FIX: fix the error scale of circle compensation
...
jira: none
Change-Id: I5c27ef8312e75666dc1c5c2c7dedf3f7e4831497
2025-03-24 09:04:48 +08:00
a13c472816
ENH: handle legacy for ASA-Aero
...
1.Change ASA-Aero to ASA-AERO
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I49c4c31b9928e07b67b9893a4b204c2418089f17
2025-03-24 09:04:47 +08:00
74902e5870
ENH:Display SVG highlight icon when editing SVG
...
jira: none
Change-Id: Icdbc8ec9ff0394bc41d6dd2d1a48a1d30c946497
2025-03-24 09:04:47 +08:00
01918affdf
ENH:fixed incorrect prompt for glow material
...
jira:[STUDIO-10574]
Change-Id: I4475eb527ffbc8cc6d72405445552971d062b45e
2025-03-24 09:04:47 +08:00
9c28c320d6
ENH: new wiping dialog
...
1.Enhance performance and ui display
jira: None
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If1cde4d1a17437ee5485dd51adff4c3444774ffd
2025-03-24 09:04:23 +08:00
bc446854ff
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3de9ef68ef727d58adac5c6025e50d1fa318177b
2025-03-24 09:04:23 +08:00
22499a552e
FIX: the timelapse gcode is not generated in spiral vase mode
...
jira: none
Change-Id: Ibb73fab7f51e5a81bd32b6e5df18a095f2aa30d3
2025-03-24 09:04:23 +08:00
69c2947daf
ENH: add new way to set bed temperature
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I99a9f67e9b13b2137ad371b22cf0999ccf9c096d
2025-03-24 09:04:22 +08:00
5850bc8fbd
FIX: support save remote file to storage
...
jira: [STUDIO-9095]
Change-Id: I675d942b52e723908a5be1861efe7917cdcc599d
2025-03-24 09:04:22 +08:00
69edcd530f
ENH: add pla glow for a1 mini
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic24a3909297f863dd2fc6c2239ca5f084bd7abc7
2025-03-24 09:04:15 +08:00
0f6d691597
ENH: update profile for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd5c507c6e9db4a74f68389a9b7ac476679fcc5f
2025-03-24 09:03:57 +08:00
cb5c007d28
FIX:update svg
...
jira: none
Change-Id: Icd74c1fd1eee3c04ea6caaaab96c990dc64bdcdf
2025-03-24 09:03:27 +08:00
d7bc191cd3
FIX: update HMS files
...
jira: [none]
Change-Id: If1124ce837984b4d5926a3b20b1419b3b8f5e1cd
2025-03-24 09:03:26 +08:00
99a8139c1b
NEW: Ignore Nozzel Select in UserGuide
...
JIRA: none
Change-Id: I507a92abb9137167dbcbe1def8276f868529c4ab
2025-03-24 09:03:22 +08:00
2421cd430d
ENH: update translation
...
jira: none
Change-Id: Iceeaf2d9bb93fcee4fadfdfc2a5f1f7ab4a0b684
2025-03-24 09:00:57 +08:00
c3a8690987
FIX: update the display of AMSHumidity
...
jira: [STUDIO-10119]
Change-Id: I7a1be57bd0dff13be149d6450b36fb54ffa9521d
2025-03-24 09:00:56 +08:00
0b3cd958d5
FIX: Cali thumbnails distinguish left and right nozzle
...
jira: STUDIO-9747
Change-Id: Ie28901288c166cdcd7403311cb467b72453c2ca4
2025-03-24 08:40:49 +08:00
ec2b5bf690
ENH: add skippable part time for other printers
...
1. also add a new type: head wrap detect
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8d3056676958245d44171870b6d21ec0ea8bdfe0
2025-03-24 08:40:49 +08:00
d179978ae8
FIX: update translation
...
jira: [none]
Change-Id: Ifc90c4c7d8deb54d8b0f07365adf83b4809c66eb
2025-03-24 08:37:53 +08:00
5b4dcfdaa7
FIX: update hms files
...
jira: [none]
Change-Id: I57633250f1abe12c6a8e0b647965eacce94ddec3
2025-03-24 08:37:52 +08:00
658a8ab7ef
FIX: the humidity display
...
jira: [STUDIO-10481]
Change-Id: Ib4bec6db6afbe40199c401c539b13a0e8459bbad
2025-03-24 08:37:52 +08:00
fa2fc22f3e
NEW:added inspection of pla-glow material
...
jira:[none]
Change-Id: I1a62992e24665b83f54981e59edc1ba1fcda9a8a
2025-03-24 08:37:52 +08:00
853f899500
ENH: remove bambu tpu 85a temperoraily
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie45b497ad5a838a45e819467944775ffaaf955fa
2025-03-24 08:36:36 +08:00
8d10dcd046
ENH: add profiles for TPU 85A and 90A
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ica88ced8d2e0dbb1bdff0d4b80863bd98102ff16
2025-03-24 08:36:36 +08:00
63b7c02219
FIX: Add MakerSupply Hover Tip
...
JIRA: none
Change-Id: Ibbf3dcd4cb3accbb7ebe5630e70a209aaab8f30c
2025-03-24 08:36:36 +08:00
fceb5ec5aa
ENH:add scroll for SyncAmsDialog
...
jira: none
Change-Id: Id1a6ea1107b8672182f86e16f2093b661d8f8966
2025-03-24 08:36:35 +08:00
ff37dbdf79
ENH: remove unused keys in profile
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib54b300a3c10ec45acf4aa842c1162bad5bdb289
2025-03-24 08:36:11 +08:00
c40f984043
ENH: refine wiki
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I96f9efb6404bbb4df2f11ba44d653542154c5648
2025-03-24 08:36:11 +08:00
0ea2a8dabe
FIX: switch the image
...
jira: [STUDIO-10459]
Change-Id: Ibe33c0cdf208b898295dfcead8c45063c051860c
2025-03-24 08:36:11 +08:00
aa7590797c
ENH:translate text
...
jira: none
Change-Id: Ib5dbb29be00c5f0dd9b3c278e3f47faf3fbb3c44
2025-03-24 08:36:10 +08:00
4747cbc53a
ENH: update translations
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0a7f24dd1538f4baf1b2b56f35233de5937a6d30
2025-03-24 08:35:26 +08:00
2e3edc4518
FIX: wall count fixed && overlapping of interface filling path
...
jira: STUDIO-10419, STUDIO-10420
Change-Id: Ib7274420ceb8149a02e82d896757ce5ace908fb9
2025-03-24 08:35:26 +08:00
fe9073696d
ENH: modify filament config for petg hf and pla basic
...
jira: None
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I46528a07a9e1d3f7422106636b405022811d78e6
2025-03-24 08:35:25 +08:00
6e74a4a77b
ENH: seperate timelapse time in preview
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8cc57c70743019baeabe365dbec73affdf5149fe
2025-03-24 08:35:25 +08:00
0deb17f43e
FIX: update the ext images
...
jira: [none]
Change-Id: I3138fcfa124127672da982fb6e761492ccd98ea6
2025-03-24 08:35:25 +08:00
3e0b6eb228
ENH: generate framework for all layers
...
jira: none
Change-Id: I95f35ba45fe9f544c53bdf0c5a52a70bd45ee7a9
2025-03-24 08:35:25 +08:00
db2a8f011c
ENH:translate text
...
jira: none
Change-Id: I7f41c2b495cd796588bf966918e9cff87c4414ae
2025-03-24 08:35:24 +08:00
970d176cf7
FIX: update HMS
...
jira: [none]
Change-Id: If64f38fe2d8bad68799f251d0045ede52098693d
2025-03-24 08:35:24 +08:00
a3a9d75cf0
ENH: add some translation
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I1443ae50e0c3ded3988281558c796d7d4734a6ab
2025-03-24 08:35:23 +08:00
a04aec1db2
ENH: change translation
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie8c1508539dd18556a659f88302db744e8b3a4f8
2025-03-24 08:35:23 +08:00
a7ad6dfac4
ENH:Optimize interface display in "sync ams" dialog
...
jira: none
Change-Id: I51e8a55491112653e8e55eed0d6c93c6a37dcbe0
2025-03-24 08:35:22 +08:00
908ac599fc
ENH: translate
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8263638631611f0efbe0f4a9440378701e6ba743
2025-03-24 08:35:22 +08:00
6e9cb17dd3
ENH: dulicate setting id and error preset file
...
Jira： none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I07e6fe63f7272134f5d113c14bd7b32eb620fa27
2025-03-24 08:35:22 +08:00
45d2d3fc9b
FIX: update some translation
...
jira: [none]
Change-Id: I76afc7adb4f882bcd64c266cb10160333ce439d6
2025-03-24 08:34:32 +08:00
547cfe75d0
ENH: update translations
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4b7f1518a4805c5c5debdc6ad5b059b75effe4ce
2025-03-24 08:34:31 +08:00
82d13205d5
FIX: h2d do not support timelapse in sprial mode
...
jira:STUDIO-10402
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5d012a4665bf5715d90fcb973a589d3a500ded13
2025-03-24 08:34:31 +08:00
fb5bf37336
ENH: change infill params' name
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I864f24a335d59b4ee6ae474c9a338cd2fbc2ebf1
2025-03-24 08:34:31 +08:00
872726abed
ENH: add cross zag pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If11f423db443b3f31f2181d4b0c56eaeb9a7ca5d
2025-03-24 08:34:30 +08:00
b50bde834d
FIX: extruder_sync.svg
...
Change-Id: Ia83235ad231ed94d71075223539b1f6a007c0651
Jira: none
2025-03-24 08:34:29 +08:00
09c0b004cd
ENH: update H2D filament retraction of matte
...
Jira: 9900
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9e8f962796b7301fff7c8ae4e74db548771bd14e
2025-03-24 08:34:29 +08:00
ff7eb25c54
NEW: port Zig Zag infill from Prusa
...
Thanks to Prusa!
jira: none
original commit message:
ceb13b1faa33ac096fe7ffd89aa222abca119e02
SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
2025-03-24 08:34:29 +08:00
16813aa460
FIX: missing gcode line caused by gcode GCodeEditor
...
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
2025-03-24 08:34:29 +08:00
3d5fb11527
ENH: add zh-cn version slice vedio
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie96e0b1503138de9e2910e20d07ca3976dacfdf5
2025-03-24 08:34:28 +08:00
xin.zhang
BBL\chuan.he
qing.zhang
xun.zhang
zhou.xu
Mixian
gerrit
zhimin.zeng
zorro.zhang
jun.zhang
jiaxi.chen
tao wang
jiangkai.zhao
salt.wei
chunmao.guo
Lukáš Hejl