804fe8d124
ENH: optimize group logic for unprintable filaments
...
1.Also fix a tip mistake
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia52f95988d467a7018579a774376578b83e7ca05
2025-03-24 09:18:35 +08:00
7768570492
FIX:Thumbnail render should use light in "obj import" dialog
...
jira: none
Change-Id: I1457876a12f42abd93d26cebb60d2d7d8075df74
2025-03-24 09:18:34 +08:00
310f13f36a
FIX: adjust nozzle_change_gcode before filament_end_gcode
...
jira: none
Change-Id: I56498d473568ef0f5a7ba7c149befff55016bda1
2025-03-24 09:18:34 +08:00
a894ec9e55
FIX: modify the default value of extruder_id for cali
...
jira: none
Change-Id: I7aba99d5264d900c7a0795ff13442c62c34ae392
2025-03-24 09:18:34 +08:00
9e2bfb7d7e
ENH:Obj import supports up to 32 colors
...
jira: STUDIO-10927
Change-Id: I46b2c63a625f91d0caafa78cf47bf0fc8589015b
2025-03-24 09:18:34 +08:00
1968c8b117
FIX: adjust the sort for segment intersections
...
and revert the modify of I64dbbcf9e35477b597c4755863f307cf444f50d9
jira: STUDIO-10841
Change-Id: Id6a56372cade4e62f3714aae6892468575298904
2025-03-24 09:18:34 +08:00
bfa42e8e77
FIX: nam speed of H2D
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia400809d73bac1a6a526ebddfe8b48070574c125
2025-03-24 09:18:33 +08:00
5c6264cf9f
ENH: add tpu exist flag in place holder
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieba35adde23e1ce1169b10955bafbbf2bc856663
2025-03-24 09:17:18 +08:00
6bfaa7952c
FIX:different fan pre start time value for different filament
...
Change-Id: Ic404d2a524ba912b6ad7d0dead00761403b52cf4
2025-03-24 09:17:17 +08:00
d6fc36daba
ENH: Increase TPU printing speed.
...
1.add parameters precooling_temperature, ramming ravel time，prime_tower
max speed , ramming_vol_speed;
2.support modify the wipe tower wipe and lift speed
jira: none
Change-Id: Ic9661e514ef0d4e4c0dcebb5e56f0c962e6c7b9a
2025-03-24 09:17:01 +08:00
c38eb761c6
FIX: crash when tool_change is empty
...
jira: none
Change-Id: Ia2d6fda6847e41054700e37a25179ae2a8d5cd46
2025-03-24 09:17:01 +08:00
9d93dd7d98
ENH:add "gamma_correct_in_import_obj" function
...
jira: none
Change-Id: Ia16d1c996f02333745222eb2144d01a44d101754
2025-03-24 09:17:01 +08:00
2a00a0d889
ENH: Reduce unnecessary solid fills
...
jira: none
Change-Id: I9f0f3eeacb6a553ef06c9afbb1299ff6139e77b9
2025-03-24 09:17:01 +08:00
611f022a0c
FIX: fix slice error: invalid infill
...
Reason: sorting errors caused by precision
jira: STUDIO-10841
Change-Id: I64dbbcf9e35477b597c4755863f307cf444f50d9
2025-03-24 09:17:00 +08:00
ee2d6bc9d5
ENH: add app config: gizmo_keep_screen_size
...
jira: STUDIO-10293
Change-Id: Ie071d132d984adcee41e4d1c49e23b29fd0067bb
2025-03-24 09:17:00 +08:00
3e974ffe0b
ENH: add sysmetric y for zigzag
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ibd01a37ea206c0433b43a756f3a7840ca87fd3b2
2025-03-24 09:17:00 +08:00
766c6e0041
FIX: remove some warnings
...
jira: [none]
Change-Id: I0e74b7316d0efe38c65e1f695b2a09eb09103552
2025-03-24 09:16:56 +08:00
dc1bac6b6c
ENH: refine some func and class naming
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icaaf6197bacf5e7037835c475b0d0af0cfb22a44
2025-03-24 09:15:32 +08:00
1959fa7d5c
FIX: Remove unprintable_filament_map
...
jira: none
Change-Id: I30285d0cc98a974e71f16fd9adb57dfcccb39415
2025-03-24 09:15:32 +08:00
4af6386302
FIX: Fix the error throwing exception
...
when adding double-head related material parameters
jira: none
Change-Id: I666e1069746d2c284f59ca2ac0f44c664c578a63
2025-03-24 09:15:32 +08:00
a7207bef35
FIX: disable FXAA bu default
...
jira: STUDIO-10815
Change-Id: I860273e5ee10e4704f4215307e23c81821600db2
2025-03-24 09:15:31 +08:00
ccf58b3fc6
ENH: set cooling/heating rate as extruder param
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia5eb6ba5bea0351ebcc3867644a518fb5560e500
2025-03-24 09:15:31 +08:00
f6a46d9b95
FIX: negtive value in grouping stats
...
jira:STUDIO-10772
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I90b88c7d96f6aeb31df36233efab5b9059ad2622
2025-03-24 09:15:31 +08:00
d61d0c7231
FIX: remove duplicated filament change
...
1.Remove duplicated filament change after machine start GCode
2.Add missing filament change after machine start gcode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I97e1a3e8dc1ad39c95f763469086c2e360807288
2025-03-24 09:15:31 +08:00
de449496b5
FIX: Old version of gcode cannot be opened normally
...
jira: STUDIO-10825
Change-Id: Ibf512cd4abc5315bb090d39974fb436e328214c7
2025-03-24 09:15:30 +08:00
5ddf3ac86f
ENH: config: remove unused assert
...
jira: no-jira
Change-Id: I3e2bea9f2fd5483c3a0f492bf6a1e47274315d28
2025-03-24 09:15:29 +08:00
1e4c82c781
FIX: config: fix some potential crash when switch configs
...
switch configs between single extruder and multiple extruders
jira: no-jira
Change-Id: I3a7ebd590b061f7dec4d8d12d5508e869a941beb
2025-03-24 09:15:28 +08:00
f38d8f959f
ENH: some tpu filaments are not support auto cali
...
jira: none
Change-Id: I253e5c5936bc5fb90612f385e358b3015bdabf2e
2025-03-24 09:15:28 +08:00
04bed7f239
FIX:cancle does_bound_a_volume check and try boolean with warning
...
jira: STUDIO-10754
Change-Id: I0aadd9fe63b0dfeed13b03b62753405040e12e11
2025-03-24 09:15:28 +08:00
40654323b0
FIX: opposite value for detect floating vshell
...
1. Also add default values in profile
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I70eb017a63fa55b40f3f62b4f31da0179ebc5abc
2025-03-24 09:15:28 +08:00
40c4f667d1
ENH: full code of ensure vertical enhance
...
1.Mark ensure vertical part as a seperate part
2.Detect floating line in vertical part and use bridge speed to print
3.Slow down the vertical part to 80% solid infill speed
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I59678b3530c6cbb9565ac038349a0a2181e16dc8
2025-03-24 09:14:27 +08:00
3a7dcfd232
ENH: Use the real prime tower model after slicing.
...
1. set wipe tower real height
2. fix wipe tower small arc error
3. add rib_width constraint to ensure that the rib wall of the wipetower are attached to the infill.
jira: STUDIO-10540
Change-Id: Idfdc809f0236121d98587ac2a09a2ebbf5caf945
2025-03-24 09:14:27 +08:00
cd3b96c7f5
ENH: add fxaa for thumbinal
...
jira: STUDIO-10640
Change-Id: Ia949904f687b0050514e07e439d82312db473557
(cherry picked from commit a823435a282129a8020e5bf811f6b4203d2a7e89)
2025-03-24 09:14:27 +08:00
2fd184f754
FIX: auto arranging crash
...
1. Use map<int, std::string> extrude_id_filament_types to avoid mismatching of extruder ids and filament types.
jira: STUDIO-10708
2. fix plate level arranging not working
jira: STUDIO-10733, STUDIO-10721
3. fix auto arranging may put objects overlapping with fixed ones when
changing printer profile.
3. fix auto arranging puts large objects overlapping with occlusion area
4. add alt+a to trigger auto arranging for out of plate objects
4. fix several texts not translated.
Change-Id: Ie43624cb20304f27649d3ce24efa01394f30188e
2025-03-24 09:12:13 +08:00
1864b22478
FIX: gen floating areas when holes of support_area propagate
...
jira: STUDIO-10271
Change-Id: Ib45d78c6f920613ba29cb97cead9192813cbb4fe
2025-03-24 09:12:13 +08:00
e7eb3bd388
FIX: use support_interface_material between support_material
...
jira: STUDIO-10544
Change-Id: Id1bfda49bc5ac2bd6ecbad473d8ee063d3c0f030
2025-03-24 09:12:12 +08:00
7345b0034f
FIX: modify the insert depth value of wipe tower
...
jira: none
Change-Id: I60b453e688b5bd592b6e276621fc9e8ca68c8789
2025-03-24 09:12:12 +08:00
a44da293ad
ENH: CLI: keep the params of old version
...
jira: STUDIO-10695
Change-Id: I4b0a768bc4fc6c856c9c92fa4a05007a3097df35
2025-03-24 09:12:12 +08:00
609a4c0e52
FIX: crash when the wipe tower block is invalid
...
jira: STUDIO-10696
Change-Id: I6e9ff87cfb8cfd2383480248d56b8515d383b11c
2025-03-24 09:12:11 +08:00
c58e5d447d
FIX: fix the unknown object label id
...
jira: 10699
Change-Id: I50b5b230625be8dd0c36b588e6ae9358eef334ba
2025-03-24 09:12:11 +08:00
6be306e548
ENH:update image for plate type
...
jira: none
Change-Id: I590bf9d6596ccf5cd6e06844fb3ed247fa526ba6
2025-03-24 09:12:10 +08:00
f3c7411351
ENH: get symmetric pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If428ead5f938ba4735786604468b1540d307142d
2025-03-24 09:12:10 +08:00
a4388010bd
FIX: fix slice core dumped problem
...
enable timelapse and the first layer has no toolchange
jira: STUDIO-10698
Change-Id: Ia503efe4a143fe98f67cd3913b7745d74b113170
2025-03-24 09:12:10 +08:00
ecb6aff6c9
FIX: the master extruder id is incorrect for custom printer preset
...
jira: none
Change-Id: I4ea27ada6f976f1030acc88f131e77a382ca5199
2025-03-24 09:12:10 +08:00
6869abceda
ENH: add min vitrification temperature in placeholder
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id9da8c829a2ed7469a01a887a0f19b0d32f0c36a
2025-03-24 09:12:10 +08:00
29766420dd
ENH: debug: improve the assertion judge in Point.hpp
...
jira: no-jira
Change-Id: I22b0cd3dc897c5cd05d14273d88f90bdc01ae644
2025-03-24 09:12:08 +08:00
6d51451db1
FIX: modify manual offset
...
loosening when positive and tightening when negative
jira: none
Change-Id: I32fdc2685202ef51af8d7a7b98126d28d2c6647d
2025-03-24 09:11:29 +08:00
f141425fee
FIX: fix the customize compensation bug
...
jira: none
Change-Id: I2165bbecb7cf03888dad00d1fc76ee74bd2b0fc0
2025-03-24 09:11:29 +08:00
d77848fa9f
ENH: don't generate bottom interfaces for tree support
...
Previously we set bottom_z = 0 when soluble_interface is true and generate
bottom interfaces for tree support. This may cause tree supports unstable.
Now all tree supports will have no bottom interfaces.
jira: STUDIO-10505
Change-Id: I3c74f98fc171d28ff24ace3fd594ef5c925ff34d
2025-03-24 09:11:29 +08:00
1a240e5d14
ENH: add some change for translation
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I58ded926c8525e261bb1c7518562c9276afc1409
2025-03-24 09:11:28 +08:00
99af2382c4
Fix: modify tpu travel speed to 2 times
...
because of 2x nozzlechange width
jira: none
Change-Id: I3a9af777551c54b8bac273bf1f6e06c9f36673bb
2025-03-24 09:10:29 +08:00
d5b570d8dc
ENH: adjust wipe_tower depth interpolation
...
because [0,0] will cause the wipetower to disappear in low-layer-height models with enable smooth timelapse type.
jira: none
Change-Id: I6fe3d4128e9b284ae7660f7e0f9f8b62f74cf427
2025-03-24 09:10:29 +08:00
9f060f9135
NEW: cherry-pick rendering-stuff to github branch
...
jira: no-jira
Change-Id: If615d572b2021e707cc9ff037fefeabf46dacfa4
2025-03-24 09:04:57 +08:00
3366b13fd6
FIX: wrong number of outer_walls
...
1. when some area is need_extra_wall, the whole layer has double walls.
2. set circles above soluble interface with double walls
jira: STUDIO-10505
Change-Id: I5846c712a36e2e5bfc5018013b44e2712229b6ad
(cherry picked from commit 5675d9c14e57c4615249ec665603dd662a9a7ee3)
2025-03-24 09:04:49 +08:00
66d8c73275
FIX: the circle parameter is filament parameter
...
jira: none
Change-Id: Ifcf26f0a8ace77392094f05eecc03ed664d67f5c
2025-03-24 09:04:49 +08:00
b2f32e5010
FIX: wrong value in param
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3521005617f414f57247599f3211e87f576a28e5
2025-03-24 09:04:48 +08:00
6e312e2027
ENH: add circle parameter for posSlice
...
jira: none
Change-Id: Ib95f2a2de4251f8dcf419e2241d83c9095651382
2025-03-24 09:04:48 +08:00
52e05ed0d9
FIX: fix the error scale of circle compensation
...
jira: none
Change-Id: I5c27ef8312e75666dc1c5c2c7dedf3f7e4831497
2025-03-24 09:04:48 +08:00
c782fbb8d9
ENH: Separate the number of color bleed layers from top_shell_layers
...
jira: none
Change-Id: I32c14be306ad3fa5970f8c8af8622e086cbca3d9
2025-03-24 09:04:48 +08:00
a13c472816
ENH: handle legacy for ASA-Aero
...
1.Change ASA-Aero to ASA-AERO
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I49c4c31b9928e07b67b9893a4b204c2418089f17
2025-03-24 09:04:47 +08:00
e79ba2f1ec
FIX: wrong bed temp in placeholder
...
1.Also add a new field to mark whether enable high low temp mix
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I208e0e7a4ce75feccc8659ecf940447e591d9505
2025-03-24 09:04:47 +08:00
43617a96df
FIX:add "Slic3r::Emboss::union_with_delta" api for single ExPolygons
...
and add_indice api
jira: STUDIO-10576
Change-Id: I85086552bb7eec0118e00299d4c07fbde7cc4aed
2025-03-24 09:04:47 +08:00
01918affdf
ENH:fixed incorrect prompt for glow material
...
jira:[STUDIO-10574]
Change-Id: I4475eb527ffbc8cc6d72405445552971d062b45e
2025-03-24 09:04:47 +08:00
5728474378
FIX: dont need roof1stlayer if there is no roof above
...
jira: STUDIO-10573
Change-Id: Ie6ef6e3321f076511f0caf24b906f75761aacfc8
2025-03-24 09:04:23 +08:00
1a58c3f1c8
FIX: when params change, clear detected overhangs
...
jira: STUDIO-10575
Change-Id: If38fc21a97657980b4dfae17699f3fb41a46fa0a
2025-03-24 09:04:23 +08:00
01460cae76
ENH: support skip timelapse gcode when skip all object
...
jira: none
Change-Id: I31586b1885e92e0eb0005b458e1dbc19f945a929
2025-03-24 09:04:23 +08:00
56a7d295c7
ENH: enhance check for only one wall top
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia5f326416516a73111e37ba75bc673e69f0f99a5
2025-03-24 09:04:23 +08:00
22499a552e
FIX: the timelapse gcode is not generated in spiral vase mode
...
jira: none
Change-Id: Ibb73fab7f51e5a81bd32b6e5df18a095f2aa30d3
2025-03-24 09:04:23 +08:00
69c2947daf
ENH: add new way to set bed temperature
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I99a9f67e9b13b2137ad371b22cf0999ccf9c096d
2025-03-24 09:04:22 +08:00
4fadeab450
ENH: Modify extra_rib_length can be a negative value.
...
jira: STUDIO-10535
Change-Id: Icd6134a96c1f32111f908e87acda8c5132dcd73c
(cherry picked from commit cbf4b3eafff29ad961deec6acad5104e34a57481)
2025-03-24 09:04:22 +08:00
8d32d29016
Fix: crashes when slicing small objects with wipe_tower.
...
jira: STUDIO-10572
Change-Id: I37312673a87e542120ee7282c22f80e16c894cd9
2025-03-24 09:04:22 +08:00
e71adc067c
ENH: set max prime_tower_extra_rib_length to 300
...
jira: STUDIO-10569
Change-Id: Iad518db29206d16bb59b5a938623d351862a190a
2025-03-24 09:04:22 +08:00
f61beec992
FIX: fix for the previous changes
...
1. keep growing when collison do not contain the circle of the node.
2. when contact_node is nullptr, cannot assign it a type.
jira: none
Change-Id: I6168a3a19ceec087e93c919625c0c3b654fc7d7e
2025-03-24 09:04:22 +08:00
d9ad4e81e9
NEW:Add pre-start fan gcode for overhang lines.
...
when encountering overhang paths and the current fan speed is low, the fan is set to start 2 seconds earlier by default. This prevents cooling issues caused by delays in fan acceleration.
Change-Id: I9e9267b77f1e4d9a2b81bda16c1441703a7b28e7
2025-03-24 09:04:15 +08:00
bcbb08c303
FIX:HeightRange must use world cs
...
jira: none
Change-Id: Ib0d1efa0a5b2f389d3ec0ff68f82af503084605a
2025-03-24 09:04:15 +08:00
ca5ec101f9
FIX: the nums of filament_type in plater config is incorrect
...
2. Improve the judgment and display of the extruder printing area
jira: none
Change-Id: Ie9e1991904bfbc5bffceedb7810b1d1fa598933b
2025-03-24 09:04:15 +08:00
6266a987d4
FIX: first layer overlaps
...
still need to check if layers' bottom_z is under initial_layer_height since z_heights[0] is fixed to it.
jira: STUDIO-10282
Change-Id: Ia2d0565039389c8eb7edbb6b5403996b5ee412c2
2025-03-24 09:03:27 +08:00
f65f5fc208
FIX: Rectilinear Interlaced pattern not working
...
Rectilinear Interlaced interface pattern not working for normal support.
jira: STUDIO-8847
github: #5307
Change-Id: Ia17c9a0f8f20e3ac7a98ce13b1ea5065c200ac3a
2025-03-24 09:03:27 +08:00
e684f8fcc6
FIX: wipe tpwer should be no_brim_area
...
jira-id: none
Change-Id: Ia8b9c1639a62d90421932594b3709eba71b5e723
(cherry picked from commit 68eb40bc74d75fece451ed3b4b4b767b46c238b3)
2025-03-24 09:03:27 +08:00
7e0078b24e
FIX: add gcode reserved tag
...
and fix block.finish_depth error
jira: none
Change-Id: If272b181430aa79a88ff0cb79670cf2c62a06020
(cherry picked from commit 0f4516f78186fb2a13b245eb38d13dfc2fce8bfc)
2025-03-24 09:03:27 +08:00
03c5905608
FIX: Int32 out-of-bounds problem
...
jira: none
Change-Id: I1dfc611b214e6e4c6641b8de90920e5a5881373f
2025-03-24 09:03:26 +08:00
adb3fbcfcf
Fix: only one overlapping area can be added to cluster
...
1. Wrong generation of cluster when there are multiple overlapping areas in one layer.
2. set interface_bottom_spacing = interface(_top)_spacing.
jira: STUDIO-10241, STUDIO-10506, STUDIO-10507
Change-Id: Ic7a0d61e43c5cd8d8094cb75ac257f83bc2952b6
2025-03-24 09:03:26 +08:00
2421cd430d
ENH: update translation
...
jira: none
Change-Id: Iceeaf2d9bb93fcee4fadfdfc2a5f1f7ab4a0b684
2025-03-24 09:00:57 +08:00
81ad7bdde0
Fix: modify the rules of get_wall_filament_for_all_layer
...
jira: none
Change-Id: I6e8655105470dc3eef291d4b6ac1c4447092b21a
2025-03-24 08:40:50 +08:00
b9d07f402e
ENH: Remove the solid layer below the fast extrusion
...
jira: none
Change-Id: Ied59c6f18bc2832be80c105d95f77d5cff119cc3
2025-03-24 08:40:50 +08:00
147e7bdb50
ENH: modify quick extrude to 2 perimeter width
...
and use bridge flow for nozzlechange
jira: none
Change-Id: I9bda1b689d7139819607bace09354ef43d27a970
2025-03-24 08:40:50 +08:00
d6c2aef6c5
FIX: infill generate fail
...
Jira: none
Two intersection points have the same pos, which causes the sort function to fail. Each intersection pair type should be LOW and HIGH, sort fail causes the HIGH point to be put first, so the check step will report fail.
make sort function works on that situation
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I407146e55265c5b55f4e44ac174ce82b2cb0af05
2025-03-24 08:40:50 +08:00
bd2843ce51
FIX: can't detect overhang degree on classic
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I299995c61c2f458bdca95b6f4ae06d87a718b350
2025-03-24 08:40:50 +08:00
aad1ab2090
Fix:the missing extrusion issue in the wipe tower
...
and resolve the infinite loop during multiple material changes when printing TPU.
jira: none
Change-Id: I9d0fb142ced6ba894803fd4c9b9b665e2fa93d92
2025-03-24 08:40:49 +08:00
ec2b5bf690
ENH: add skippable part time for other printers
...
1. also add a new type: head wrap detect
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8d3056676958245d44171870b6d21ec0ea8bdfe0
2025-03-24 08:40:49 +08:00
b36c41e514
ENH: reopen confilctchecker with adpative height.
...
and fix conflict checking when the wipe tower's brim fully encloses the model
jira: STUDIO-10237, STUDIO-10296
Change-Id: I6e2a6640c06ddb6b3af700c9048fa26434411631
2025-03-24 08:40:49 +08:00
939b405c35
Fix: the generation of the skirt does not take the wipe_tower into account.
...
jira: STUDIO-10381
Change-Id: I523d366d6d569696de48f872be827d73710cb526
2025-03-24 08:40:49 +08:00
f123058322
ENH: enhance auto flush option
...
1.Support auto flush when change printer and nozzle volume type
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9dfc2fff095bbf1901afe99556d1e57aa225f482
2025-03-24 08:40:49 +08:00
8f92391717
ENH:remove restrictions on mixed use of high and low temp filaments
...
jira: STUDIO-10482
Change-Id: Ifdf6f11b45f2e6d138ea615a3ad1f23d40ad3fe9
(cherry picked from commit 0178e930809cabcdbc09ab305e70e4323598b343)
2025-03-24 08:37:53 +08:00
d4a39655b0
FIX:Calculating convex hull without reassembling the matrix
...
jira: [none]
Change-Id: I6defb793d58762837caeaca58d23ce728461ffd7
2025-03-24 08:37:53 +08:00
ab018130d7
FIX: support_on_buildplate_only is not working
...
jira: STUDIO-10473
Change-Id: I58839e4281089d477087f9cad3db8027ea71cd9e
2025-03-24 08:37:52 +08:00
2ca82b096e
FIX:Avoid array out of bounds
...
jira: none
Change-Id: I1ef5921a11ec7f9e2fc40edad4e954474628f7b5
2025-03-24 08:37:01 +08:00
fe20ab11b9
FIX: useless change of extruder
...
jira: none
Change-Id: I4331e129d5a1ed79b539946d84ccd3113df93ef0
2025-03-24 08:36:36 +08:00
3309a40d42
FIX: the print_z is incorrect when use 0.8 nozzle printer
...
jira: none
Change-Id: Ie06c0e1b763be7178246e5dae101e650b8534f4b
2025-03-24 08:36:36 +08:00
6d1b8f0324
ENH: protect build ams list
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4e8665df0bb24f056f79bd5cabab886bb5ff7921
2025-03-24 08:36:35 +08:00
xun.zhang
zhou.xu
zhimin.zeng
qing.zhang
lingdong.gu
jiangkai.zhao
jun.zhang
xin.zhang
lane.wei
Arthur
jiaxi.chen
tao wang
wintergua