62b1d00d1f
ENH: 3dbed: support rendering extruder area with different color
...
JIRA: STUDIO-7494
Change-Id: I717999e8b7ab1d7d350299b412a3a270c6ba7a9e
2025-03-22 20:53:53 +08:00
56ed912c3e
ENH: vertical layout button
...
Change-Id: I0b205298688c9df88dcfe6eb6e72cc887a9ed5be
Jira: none
2025-03-22 20:53:18 +08:00
12b6f064a0
FIX:Use different ext-img for single/double nozzle
...
jira: STUDIO-7852
Change-Id: I4d8181834bc57ff3c3ba54fafe5ed266a7a2b843
2025-03-22 20:52:56 +08:00
53d066a2b6
FIX: PA value display
...
jira: STUDIO-7725
Change-Id: If3fbdd831f848731587e66c273cc0317a2ba33fe
2025-03-22 20:52:55 +08:00
66701cc4c9
FIX: Mapping UI display
...
jira: STUDIO-7473, 7817
Change-Id: Ibd014985b3b4997bd86700537e1d8a7d0d18176f
2025-03-22 20:52:55 +08:00
ac1a1d69a1
FIX: N3S AMS display
...
jira: none
Change-Id: Ib6f4bdd0ada9df2d1aacc33568507471e29897c1
2025-03-22 20:52:55 +08:00
02a38db9c4
FIX: UI of display two nozzles
...
jira: STUDIO-7785
Change-Id: I85298721191a6dbb0c93b2dfd9db85494179631d
2025-03-22 20:52:24 +08:00
065c8d029e
FIX: Ams control display
...
jira: NONE
Change-Id: I221eb4167dad894c9e7f32141d33c5c96934df96
2025-03-22 20:41:56 +08:00
2fb0daf27f
FIX: modify the filament_set image for drak mode
...
jira: none
Change-Id: I54beabbdc3d1e4ba74d1d00e8e14b917f53be722
2025-03-22 20:40:25 +08:00
aff19b857d
FIX: add plate_set_filament_map.svg
...
jira:none
Change-Id: I45480fadc8ed9fe5f3da92184c488956a16fd270
2025-03-22 20:40:25 +08:00
b78fa4c11c
ENH:refactoring the modules of amscontrol
...
JIRA:[amscontrol 2.0]
Change-Id: Ica66500506cfe89f2eac3ae0a58fb7ff30d1da9a
2025-03-22 20:36:45 +08:00
16cadec565
ENH: add grab length
...
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
2025-03-22 20:32:27 +08:00
4014c61f88
NEW: gcode viewer add recommended colour filament widget
...
Change-Id: I37f38a175bb3f4a574a4855f8fef04e704da259c
2025-03-22 20:31:44 +08:00
0065ea986f
ENH: filament actions and dual extruder filaments
...
Change-Id: I12a83f29c96887fc910976ac8e025c4f1508d945
2025-03-22 20:31:43 +08:00
507c6a9b2c
ENH: dual extruder nozzle setting on sidebar
...
Change-Id: I7bc4209b311360c3357e3974f0e66a51daa78232
2025-03-22 20:30:23 +08:00
260a7202fc
NEW:Use new ams mappiong item ui/ux
...
jira:[STUDIO-7347]
Change-Id: Iba306c4a1b5ae59e406a6862428b425a48002870
2025-03-22 20:28:36 +08:00
c0932e16ff
NEW:support new mapping type
...
jira:[support new mapping]
Change-Id: I88e5d3b6966d4ed1e8098d13fe9335fecf6e01c4
2025-03-22 20:27:38 +08:00
c74a769c14
NEW:add "extruder_only_area" textures for
...
double extruder machine
jira:none
Change-Id: Iaf4118fb00641537838dae7cc5fdaaf07ccc9851
(cherry picked from commit a8d6c9fe8976dbcb79c1f89efb7107073cb17856)
2025-03-22 20:21:52 +08:00
960af84f8f
FIX:change condition in goruaud.vs
...
jira: none
Change-Id: I6d1e80320a2d234f875385f8f747f22d42d1112d
2025-03-22 20:21:52 +08:00
45dfb816d0
ENH:translate text
...
jira: none
Change-Id: I05ca283329648f0ed0ac45c9a9242da59128d7fe
2025-03-22 19:41:32 +08:00
35286dc66e
FIX: format of sunlu filaments id
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id560631905cc041d5106b7cb45711b440fd91c0e
2025-02-25 11:48:03 +08:00
9e2d93eb92
ENH: add pla glow for a1 mini
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic24a3909297f863dd2fc6c2239ca5f084bd7abc7
2025-02-25 11:48:03 +08:00
3f5ccacbdb
Added SUNLU PLA Matte, PLA+, PLA+ 2.0, Silk PLA+, Wood PLA, Marble PLA and PETG filaments for Bambu Lab printers
2025-02-18 20:36:37 +08:00
01ed326feb
ENH: update timelapse for A series
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id739fa9be67d679c31ad81a3ad4c3b75e3afccbf
2025-02-18 17:19:01 +08:00
51e8d57347
ENH: update timelapse for X,P
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5de6cb7ca2441c1ad025c9a448b4763f98013325
2025-02-18 17:19:01 +08:00
5489974372
ENH: update translation
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib7313957481bf756546f89322b8193d147716fc6
2025-02-18 17:19:01 +08:00
c08b7cc2b0
Fix Loading Translate
...
Change-Id: I59b4aa1310b243f11c52526d2e17c22ce7a34e73
2025-02-18 17:19:01 +08:00
6d26dbb32b
ENH: update translations
...
JIRA: no-jira
Change-Id: I2cca410d1fb9af6e9d8af1db402e6e384d102bb7
Signed-off-by: Stone Li <stone.li@bambulab.com>
2025-01-09 19:32:26 +08:00
e2b326cba7
ENH: modify fan speed for bambu tpu for AMS
...
Set fan speed to 40
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I861f78e2cca4b31daf41e2cba0a4b9b11a658a5d
2025-01-09 19:32:26 +08:00
59b7b5b528
ENH: update plate temp for asa filaments
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd88b23c9e1b5027f5aff4aeba594e953aed9ac4
2025-01-09 19:32:26 +08:00
2ff4f31eba
ENH: update translations
...
JIRA: no-jira
Change-Id: Icb80c7f367284bc029fa9a93b527b4d1cd5ed1a7
Signed-off-by: Stone Li <stone.li@bambulab.com>
2025-01-09 19:32:26 +08:00
6d66c520d0
ENH: update A series gcode
...
1.Add long retraction when cut
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I423932bd64d229db3da75578a25136bc99550b0a
2025-01-09 19:32:26 +08:00
cea5bc967c
ENH: Update UserGuide Load UI
...
JIRA: none
Change-Id: Ifc8cdd59a61dfece6c497ed50fcad9663d380be3
(cherry picked from commit 37918c4463fe6bdced742d5d81d756fa811510b7)
2025-01-09 19:32:26 +08:00
03d8d58fad
NEW: UserGuide Add Loading Tip
...
JIRA: none
Change-Id: I43d79d740b9180a16d02c54c0c9d6e11c23b1ce7
2025-01-09 19:32:26 +08:00
9878569913
ENH: Optimize Makerlab WebLoad
...
JIRA: none
Change-Id: I2761610be8d6d173dbcc37147e67cfb682cd4440
2025-01-09 19:32:26 +08:00
a22ef2a16f
ENH: add Bambu PC FR
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I841048b0c10ba3ae7543babd3e8a2ad949fb0cc5
2025-01-09 19:32:26 +08:00
fda4aea3f9
ENH: Add Makerlab JS Command And MakerSupply
...
JIRA: none
Change-Id: Idd2a471debd8d22d1e024956665cb8ff37d7c093
2025-01-09 19:32:26 +08:00
2093498516
ENH:translate text
...
jira: none
Change-Id: I23a3e1945b4ae8bf73fd1acc86f6a792e2507abb
2025-01-09 19:32:26 +08:00
29f0c3ff86
ENH:translate text
...
jira: none
Change-Id: I93e799beeecaee5640aca9a395bbfc27052a9dc3
2025-01-09 19:32:26 +08:00
de0698edcb
ENH: modify bed temp for pla silk+
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9b9ba20c7ec84320f265cd042234a8051a41409f
2025-01-09 19:32:26 +08:00
dbc11ef307
ENH: add bambu pla silk+
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I72856952a6586723bfa640c2aa459cc062ba800f
2025-01-09 19:32:26 +08:00
8690f43735
ENH: Add Left Menu Tip When MenuBar narrow
...
JIRA: none
Change-Id: I06fadf9881e134dc46d7c9a0743ae281fcf84252
(cherry picked from commit eff32db81698a8d4ec58810d2c604ba3bcda2d76)
2025-01-09 19:32:26 +08:00
6fe4d54ca2
NEW: Home Add Makerlab page
...
JIRA: none
Change-Id: Ia842b7de9bd452bdcb5fd6d7e009961b8c04584d
(cherry picked from commit 27590be491caeffd3c95ce6becb52cacfb7a174c)
2025-01-09 19:32:26 +08:00
907724cda9
ENH:translate text
...
jira: none
Change-Id: I4ff5b2e9bf31b5e27318716db1b7d427124a6822
2025-01-09 19:32:26 +08:00
19e602beea
FIX: wrong filament vendor in profiles
...
1.Wrong filament vendor in Fiberon PA612-CF
2.Add filament vendor in pla dynamic base
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id0b43098c591397e29485ef790784705a54780ef
2025-01-09 19:32:26 +08:00
419669f7b1
ENH: add 0.2 profile for PETG Translucent
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I470115d4cbf922cd46948920dad7738b8b026157
2025-01-09 19:32:26 +08:00
7e086adf98
ENH: add bambu pla wood
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id18575ce791f6d4ab4588eafd48131385296e9b9
(cherry picked from commit c7028c096d0c11d794f3f50edda0f32cdaa67e9d)
2025-01-09 19:32:26 +08:00
6c56d88d88
ENH: cli: add logic to generate upward_compatibility_taint
...
1. add some machines for downward_check to a1 mini
2. add logic to generate upward_compatibility_taint
jira: no-jira
Change-Id: Idd1cfae918ab9a167305db8614b9edd6f8c75f12
2025-01-09 19:32:26 +08:00
1540fbd906
Updated M1 nozzle configuration
2024-11-19 16:59:04 +08:00
63dc16c8a4
Add geeetech M1 printer
...
Printing settings for the M1 machine provided by Geeetech officially.
2024-11-19 16:59:04 +08:00
lane.wei
chunmao.guo
hang.xu
zhimin.zeng
tao wang
xun.zhang
Mack
zhou.xu
RikshaDriver
zorro.zhang
Stone Li
whoseyoung