faec4160d5
ENH: change param name
...
Jira: none
change filament category to filament adhesiveness category
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I267d71b2f968becf4e8f434daafdf1a70c36a823
2025-03-24 08:30:16 +08:00
52d6e2f46e
NEW: disable dgpu by default
...
jira: STUDIO-10068 / STUDIO-9387
Change-Id: Idee00cb0963d035aa5d70d6796482543cea3061d
2025-03-24 08:29:27 +08:00
4f9f1bbba0
FIX: useless expand for tree nodes
...
jira: STUDIO-10235
Change-Id: I2a6780b4d010253452249c426437aba2bcc6ff60
2025-03-24 08:29:27 +08:00
89b59f1c41
ENH: add wipe_tower infll gap
...
and fix wipe error when enable timelapse and in single color
and set rib wall as default
jira: none
Change-Id: Ic365bb7ee0ee6715c9d4f4f00b4bca9fd472c61a
2025-03-24 08:29:27 +08:00
b47b19ed48
FIX:minimum sparse infill area not work
...
1. Filter small sparse infil after doing vertical shell detect.To make
sure the params always work, the logic should also be added after doing
internal bridge detect
jira:STUDIO-9872
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9d48303e156125dfab17ef95b73294013ab9fabd
2025-03-24 08:29:27 +08:00
9a9f634e31
ENH: seperate skippable part time
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8d2117c7a7114298e966d3e043604d738847a72b
2025-03-24 08:29:26 +08:00
f8369e8796
ENH: enhance ensure vertical thickness
...
This patch support completely disable ensure_vertical_thickness
Cherry-Picked eff2c16ecc2017f8186e5804f9ed4d71d87e9248 from prusa slicer.
Thanks everyone involved
Co-authored-by: SoftFever
Co-authored-by: Vovodroid
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia00b9fb2dc5839d0e7306010260c1276c35c5d66
2025-03-24 08:29:26 +08:00
288b1eddc5
ENH:add "nozzle_has_ams_then_ignore_ext" deal
...
jira: STUDIO-10245
Change-Id: I77e49dcbdfc3acd9473ca3885c6cc7eebdd0d3fa
2025-03-24 08:29:26 +08:00
d2ae5ea32c
FIX: wrong group result in some cases
...
1.Caused by too big tolerance
jira:STUDIO-10236
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0ba182991bc70ca2d3a34a85b87fa7539c5e50d9
2025-03-24 08:26:48 +08:00
068f1d1256
ENH:reopen "enable_merge_color_by_sync_ams" option
...
jira: STUDIO-10227
Change-Id: If6e070f4daf1f96ec667f65ce4872bd942d866ab
2025-03-24 08:26:47 +08:00
2353d0366d
NEW: add config: prefer_to_use_dgpu
...
jira: STUDIO-10068 / STUDIO-9387
Change-Id: I78fe0e865e9665bbf3669e4834a39af624cde29e
(cherry picked from commit cc41c008548b4dc2874333afd63ef0035070cda5)
2025-03-24 08:26:41 +08:00
d0f89eb862
ENH: Add parameters for extruder page of printer preset
...
jira: none
Change-Id: I8eb37e41bdc4b2b1f2328acee324c6fad30e391c
2025-03-24 08:26:41 +08:00
1aad582e08
ENH: add lift after printing the wipe_tower
...
and reduce the travel speed inside the wipe_tower
jira: none
Change-Id: I3b07ee62623e0cdc2f1824f0011f95776020bee1
2025-03-24 08:26:41 +08:00
1b467b13c4
ENH: add flat ironing before toolchange
...
jira: none
Change-Id: Iabe121f9523b662fc90c18365aa642583635a126
2025-03-24 08:26:41 +08:00
b651cee316
ENH:Import 3mf into existing projects and remember previous selection
...
jira: none
Change-Id: I799c3aa240d614fc4ff7bf8ff02a9879d1a4b459
2025-03-24 08:26:40 +08:00
48368ed472
FIX:Elephant foot compensation simplify expoly leads to contour loss
...
jira: none
Change-Id: I4df620e1a0c55803499ec979fa3ea22394f32699
2025-03-24 08:25:45 +08:00
03607bd975
ENH: apply scarf seam on auto compensation circles
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I339acf82ec1af9ed0a8f973e76b73c0eae608767
2025-03-24 08:25:45 +08:00
4715fa14ed
FIX: 1.The gcode started by a space cannot be matched
...
2. use most used extruder for timelapse without wipe tower
3. apply retract_when_changing_layer for multi_extruder
jira: none
Change-Id: I4ff00573fd8a6ee9fa42877e3e7056d547e4d864
2025-03-24 08:24:24 +08:00
74a4b1bd49
ENH：modify interface of wipe tower brim_width
...
jira: none
Change-Id: I22e3c30aa6320e7e66316fa15b6c06e26e458a94
2025-03-24 08:24:24 +08:00
6350ebf9b6
FIX: FIX: fix width error of rib wall
...
when enable timelapse_print without toolchange;
jira: none
Change-Id: I4c89acc70ee122c0ad504d97c003ebb4016567d1
2025-03-24 08:24:24 +08:00
8ce8c3ffbb
FIX: fix error path in wipe_tower
...
jira: none
Change-Id: Ia13ae92c61de0d5a361e7d00ec85ff21a04dfc6c
2025-03-24 08:24:24 +08:00
37aba65efe
ENH:update and translate text
...
jira: STUDIO-10214
Change-Id: I36e3613103df7e3f65069415378f492015518e8c
2025-03-24 08:24:23 +08:00
62fff9dadf
FIX:add "read fail" deal for bambuStudio.conf
...
jira: STUDIO-10215?
Change-Id: Ib6dca514a43f3c91948df56195ba323aa9ce308e
2025-03-24 08:24:23 +08:00
d0bf00d39d
FIX: strange offset with gcode in preview
...
1. some testing code results the strange behavior,
just remove them
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8339473f7f3796d81fe6f1aebcfcff98b3b9f5d8
2025-03-24 08:24:23 +08:00
5c3d804b9f
FIX: Detach the timelapse gcode from layer_change_gcode
...
for X and P machine
2. remove lift and retract in filament_change_gcode and layer_change_gcode
jira: none
Change-Id: I3da2d3ac7f0100d1963dcbb1228323666a060534
2025-03-24 08:24:22 +08:00
02b8a79285
ENH: auto arranging won't put more than 1 TPU filament on the same plate
...
jira: none
Change-Id: I0ac0968ac56f9969f94b73cfacaac3a97a814b2d
2025-03-24 08:24:22 +08:00
f9a1ed7b24
ENH: rewrite ModelInstance::rotate with rotation matrix
...
1. Rotation operation should always work on rotation matrix. Euler angles are not reliable.
2. Remove the ambiguous set_rotation on single euler angle.
3. Fix the bug that the rotation of the mirrored object is not correct.
jira: STUDIO-8752
Change-Id: I25d661b732a872b8378af87c0ba52d75afd75c1f
2025-03-24 08:24:22 +08:00
fff7873456
FIX: enhance for timelapse gcode
...
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
2025-03-24 08:24:22 +08:00
6cea772d4f
ENH: add eager lift function
...
1.Immediate do lift in eager_lift function
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I931d22e901e2123bb886c31d8d1a5788fddeed42
2025-03-23 20:31:59 +08:00
156f390eea
FIX: don't rotate an object if it can't fit
...
even if "align to Y axis" is on.
github: #5794
Change-Id: I460003588a98aa9ff52fde1dc609d1ed54ea72c8
2025-03-23 20:31:59 +08:00
7745c29c51
FIX: useless expansion of top_interface && hybrid tree may collide with model
...
1. only expand 2mm for BigFlat/ThinPlate overhangs, unnecessary for tree node overhangs without big areas.
2. avoid the situation that some overhangs are extended to fall on models when smoothing.
jira: STUDIO-10177
Change-Id: Icec0bb59627bb85332ad1435cbe29a07f57f922e
2025-03-23 20:31:58 +08:00
69f28a711f
NEW:Display AMS mapping relationship in override mode
...
jira: none
Change-Id: Iac0b3563df2f76710a5bc461adab6dd8335ee62d
2025-03-23 20:31:58 +08:00
2fbde46b4d
ENH: improve align_to_Y_axis of A1 series printers
...
only rotate the object if its long axis is significanly larger than its short axis (more than 10%)
jira: none
Change-Id: I63fede8a55f8dc82f4388e630d58b2e62f7922b2
2025-03-23 20:31:26 +08:00
e74c9e710b
ENH:add "not support bed type" function
...
jira: STUDIO-9028
Change-Id: Id1c6cc9005fc5073d885274e360d31282063a9a3
2025-03-23 20:31:25 +08:00
85cb4a41c2
ENH: refine code for gcode line process
...
1.Add a Trietree to match command instead of the switch sentence.
2.Support VM104 and VM109
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5f6b3d1bf87baebc0a20c2589a5138538469dfec
2025-03-23 20:31:10 +08:00
1b41b9a763
FIX: only check TPU for multi-extruder printer
...
jira: none
Change-Id: I1fb882c05d43ffbcd42950ca6618d5789f148cd9
2025-03-23 20:31:09 +08:00
3f2f704676
ENH: add filament category
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0f31a376527bc540d27c49908712d08bdba3d719
2025-03-23 20:31:09 +08:00
851dd67082
ENH: update prime_tower_brim_width‘s tooltip
...
jira: none
Change-Id: If085d80bd29a4ed4c95aa8dcdec76608a0f86ae7
2025-03-23 20:31:06 +08:00
0b4da5ebb7
FIX: fix the error wipe path after nozzlechange
...
jira: none
Change-Id: I1a724b117dadc76a54f29fd75eb96e82a78f901b
2025-03-23 20:31:05 +08:00
88f2784525
FIX: should not generate timelapse gcode for H2D when by object
...
jira: none
Change-Id: I7b96d6290632ca40714d5dd06fe801a84924f84d
2025-03-23 20:31:05 +08:00
c6a12c38c5
FIX: wrong filament sequence in some cases
...
Only update the last group id if there really has filaments
jira:STUDIO-10108
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I646f54c0bc4817f0b64364edc52b7263d2833c3c
2025-03-23 20:31:05 +08:00
be02e769bb
ENH:instead of prime_volume by filament_prime_volume
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I96e7d0604da8f90678feed81833e3a634752ffff
2025-03-23 20:31:05 +08:00
4dd4e9e12c
ENH: enhance some functions of the wipe_tower
...
1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
2025-03-23 20:31:04 +08:00
78079dacd1
ENH: move extra params
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib5c4d203c6585b9946d8703d9f33477780afb275
2025-03-23 20:30:46 +08:00
c54a8333c7
ENH: seperate flush time from other types
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4cfeaec770de678b8dac405617b32738a3f68b3d
2025-03-23 20:30:45 +08:00
90d8a136f9
FIX: wrong number of interface_layer && add brim to ePolygon nodes
...
Change-Id: I4842dec3534713f48dad07637ff31b045599f67c
2025-03-23 20:30:30 +08:00
55772c5912
EMH: enhance for rib wall wiper tower
...
1. fix the slice error status
2. add rendering for wiper tower
3. modify the wipe tower start pos for rib wall wipe tower
jira: none
Change-Id: If554ca0fb30f6c7ce9641014c0ed4a7f23afd6f4
(cherry picked from commit 3ae08b458dea1d04cad33b2787d98407111b038c)
2025-03-23 20:30:29 +08:00
1f4d2cf714
ENH: adjust the interaction of the rib_wall
...
jira: none
Change-Id: I2462240304fc4ce4a1047d7c8ac818c209f15200
(cherry picked from commit 6567642e938a4edd4197535418aeb8be0bbc7c55)
2025-03-23 20:30:29 +08:00
1d33d1c37d
ENH:add rib wall wipe tower
...
jira: none
Change-Id: I9699cc74e206851284949f89230e986435b9e1b7
(cherry picked from commit eabfa6b272590698886ecec33b89207605b91993)
2025-03-23 20:30:29 +08:00
a1de92523f
FIX:All plates share the current mapping
...
jira: STUDIO-10008
Change-Id: I5d04c95dea7bd6b56c97258863a190f0f0c3b4e6
2025-03-23 20:30:27 +08:00
qing.zhang
guanyun
jiaxi.chen
jiangkai.zhao
xun.zhang
zhou.xu
zhimin.zeng
Arthur