1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
1. Add protection for building machine filaments.Sometimes we don't
know the info about maahcine filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3198d3a1a8825aa50aa49734f60a32620fc4f890
1.fix crash when deleting filaments after sync ams or inital start up
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I00c96fcebf7e0fbc127414eae44f184e3caf4dd9
(cherry picked from commit 6fb0ef6e68ed673d04c1c2311835e9988b1c70d3)
1.When there are identical materials, try to make the quantity of
materials for each nozzle as similar as possible after grouping.
2.Fix an encoding error
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iad77d7a995b9c25d004026f409c7e2ecbb8269db
(cherry picked from commit 13d7cd06252678b6b084d17438e99ff808a4191d)
1.Should use idx in used filaments in filament group algorithm
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5acc849827d84db090e61a45e80a3df2866b2724
(cherry picked from commit 84c55c10edfda91df16843f317ebc7912205b202)
1.Caused by process_arachne.When generating walls in the Arachne mode,
first generate 1 wall, then generate n-1 walls. It is different from
directly generating n walls
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifda35a5073531b3a273b9ad416417ca96325ca14
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
1. Add filament group pop up when slice
2. Add more filament modes in filament dialog
3. Add capsule button
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8bc3a2e08696e406b89e550a0335a1a36728ee65
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
1.Should get value by filament id instead of extruder id
2.Fix many other issues caused by incorrect usage
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3278d7de0f8976a97c9e5ccef80bba4a58553f5a
(cherry picked from commit 30c51dd1171fc16ba778308745fab2eb246aedd0)
Jira: none
get z direction continuous info
smoothing speed based on the max speed of the loop
rewite the pipeline
set perset param to enable z smoothing function
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib0e6a6a353c92a441a0c99a8d3d7902f7aeae6df
Unnecessary warning messages are called when slicing reliefs, because some small overhangs with only one gap layer are set as SHARPTAIL.
jira: none
Change-Id: I9abcebbcfa41d75e32f86efa64ac3bb8848247d7
jira: STUDIO-9131
reason: sometimes the popup window causes Print::Apply using invalid configs
Change-Id: I1764050f7177a65625f4668b2e1f86c80a4d4e5a
(cherry picked from commit 5a32ce3599883b9976e32ef2c864967efd52fbc2)
1.Always set filament retract params to filament_num size.In
gcode export module, we can always use filament idx to get
retract params
2. add logic in update_filament_maps_to_config to update the
retraction related params which can be overiden by filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia45dd1401aa3565d062d5da1c9f4a2ba8966f693
1. Set shared retract length size to 2. Filaments in one extruder
shares the param
2. Move toolchange function before unretract function in append_tcr
to get the correct logic
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I215a542ce36107071fad39f1f9e30234fb19a3a0
Jira: none
while there is no non support filament
set first print filament to initial_no_support_extruder
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If2fee560772c9a7cfa1855efc85116fb7df04760
1.Rely on nozzle change tag instead of T command to detect
extruder free range
2.Support enhance cooling for TPU filaments
3.Fix a negative temperature issue
4.M104 commands add params to specify that command is generated
by slicer
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2d157e5a84da75e656d3281cf38eea8697bd897a
The length of default value for extruder printable height
should be same with extruder printable area
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I01bf5e2a9ddb2faadbbe0a01f4ff2c5582b8ac45
1.Only do reorder if requseted.In by object mode,we only need
to collect the filaments in the object for filament grouping
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id88f2449c6d3c5d45b9ff87513308d997fa72da1
1.Always do filament group to get correct filament map
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie4e61c310f6c0cfeacb2a49c4f065f9674b6a35f
1. generate filament_self_index for old files in cli
2. set filament_self_index to default for old files using single extruder
jira: no-jira
Change-Id: I6e3f520723ee7f3a75634121604023ba319ff97a
1. modify the start position of wall
2. modify the overlap of wall and infill
3. print wall first
jira:none
Change-Id: I1b3f4a8cb198f84b81aba638cc722dedf84a164c
1. Pre cooling extruder after the extruder used
2. Pre heating before the extruder used
3. Refine the structure of finalize function
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I98c92763c006fc9564db45a4a5d542b891ea1aa2
1. add slicing errors for gcode in unprintable area, also for filament mapping
2. use common area for auto arrange
3. support filament_map/filament_map_mode related params
4. add logic to check the filament maps before slicing
5. uptodate support multi-extruder
6. switch new machine/filament support multi-extruder
7. process config params support transfer between mult-extruder and
single-extruder
8. improve machine-limit logic support multi-extruder
9. flush-volume support multi-extruder
10. add default params to support auto mapping slicing
jira: no-jira
Change-Id: Ice39a365841322ddb586d39c56ff923626822528
* Init port of Cura's MM interlocking
* Refactor a bit
* Fix crash when bottom surface is multi-color
* Fix crash when boundary avoidance is 0
* Add config
---------
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
jira: none
Change-Id: I81cacddf46ad5921a7a2a23fff07cc17addceb6f
1. Do not consider empty filament when selecting group for ams
2. Function "collect_filaments_in_groups" is frequently called,
optimize memory allocation to speed up.
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iad8c9a257bc2dd832c77e650f8c052fb9d8379a0
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
1.Caused by uninitialized filament map in mapping for AMS
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I71ce6001fc6f2e72eb9303fcaba0bac16ad70dc9
1.Only consider groups with a distance within the threshold
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I91526a796a0f7f1ed3e77c41076c1f85620dd944
1.Use max flow network to handle limit
2.Support setting master extruder id
3.Fix the issue in the KMedoids algorithm where data is overwritten
after each retry.
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idd2bedf39f61e7a65eb4199852f60b8fbebe0a7d
1.Set the default size of ams filament to 2
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie985ecfa44cb9fcaf21406303e32bb56e731f351
1.If the group result differs little in flush,we will choose the one
that best fits the ams filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd147b406e3494c841ef13564ad1b1231ad798fd
1. Caused by setting the current filament to filaments used
in machine start gcode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If6789b1e02aadc6d03610b7b7cc4c829ae767a7d
1.Use float to store the weight copmputed in the procedure.Avoid the
issue where filament weight remains at 0 after changing filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iff0cfc6e22f34affbc232dbfe196f27ee06d2d9e
Jira: none
if the fist print filement as same as the filament be set on start gcode
not insert filment change
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0114f287fff9be276a90772537d1910df18dec61
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
Should use filament id instead of extruder id
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I669092da6902158ad5f89d4814c78eabdfb2e7c7
1. auto mode dragdrop is not allowed
2. not display filament_map when there is no result in auto mode
jira:none
Change-Id: I0800e0d832e27fe459a17bb1aa829b5e72d0ee8f
1.Use min cost max flow to solve the tool order
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I909845039b67c7fe3ddd42580ad3f1d71d52262d
zhimin.zeng
jiangkai.zhao
zhou.xu
xun.zhang
qing.zhang
chunmao.guo
jiaxi.chen
lane.wei
Stone Li
tao wang
Noisyfox