120c7cd48c
ENH: modify max chamber temperature
...
Set max chamber temperature to 80
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iedf91d68759056be1ff5743dc272d933ff55aedc
2025-03-22 21:35:24 +08:00
6cf0e2451e
FIX: support pre heating without wipetower
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibcd3aacb9eede8bc054669f8fff98ea25f8e5d09
2025-03-22 21:35:24 +08:00
f625202c2b
FIX: remove file exception
...
1.Use boost::nowide::remove instead of std::remove
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic674ea0791342d77418d1a0de3289d6027f967b1
2025-03-22 21:35:24 +08:00
419ce01698
ENH: match first filaments with physical extruder
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I3907476c4644e2b0c2c097edf2bbf93e3a92cf90
2025-03-22 21:35:24 +08:00
361d748992
FIX: set initial one to initial no support extruder
...
Jira: none
while there is no non support filament
set first print filament to initial_no_support_extruder
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If2fee560772c9a7cfa1855efc85116fb7df04760
2025-03-22 21:35:24 +08:00
666e49e299
ENH: get first filaments & non support filament
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9370e48b634f21a2d3fd11d437f699b5cdb5ce43
2025-03-22 21:32:41 +08:00
e0508a9e51
ENH: get most used extruder id
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9c498cefb07b3bdf89a17bfd75a3075c2294c934
2025-03-22 21:22:25 +08:00
b104e138dd
ENH: pre cooling and heating
...
1.Rely on nozzle change tag instead of T command to detect
extruder free range
2.Support enhance cooling for TPU filaments
3.Fix a negative temperature issue
4.M104 commands add params to specify that command is generated
by slicer
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2d157e5a84da75e656d3281cf38eea8697bd897a
2025-03-22 21:12:54 +08:00
17edbd8cd5
FIX: the nums of nozzle_volume_type is incorrect
...
when save MW 3mf file as multi-extruder
jira:none
Change-Id: I848e348277fb047c2c3569508d2adbe940e40255
2025-03-22 21:11:23 +08:00
01bb0c6d66
FIX: wrong default value for ext printable height
...
The length of default value for extruder printable height
should be same with extruder printable area
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I01bf5e2a9ddb2faadbbe0a01f4ff2c5582b8ac45
2025-03-22 21:11:22 +08:00
cc86a62d40
ENH: config: process object config values after printer switch
...
jira: no-jira
Change-Id: I01532c42c20aa63b1b9621e175a98cad06bdf577
2025-03-22 21:11:22 +08:00
10d9c12202
FIX: fix the extruder_type error
...
jira: none
Change-Id: Iff97613b5dd0c76f9883c031ab396cd27a27b20d
2025-03-22 21:11:22 +08:00
c17b4b78f3
FIX: handle DirectDrive of old file
...
jira: none
Change-Id: I5acb1689dc1628709631f02b110c7626d93762c8
2025-03-22 21:11:22 +08:00
78eea0a36f
FIX: the wipe tower is not correct for tpu
...
jira: none
Change-Id: I79ed204638602013d73525e23a2b74af2c0efff2
2025-03-22 21:11:22 +08:00
43773d7701
ENH: buildvolume: add logic to support extruder_printable_height
...
jira: no-jira
Change-Id: I962c4aed8c536c0fd8b89ae090cd0463c5d645db
2025-03-22 21:11:22 +08:00
00810d685d
ENH: add print_outer_first for wipe tower
...
and modify the min_depth_per_height
jira: none
Change-Id: I4860df661b4dd1f66677112d14e60560bc4a73be
2025-03-22 21:10:13 +08:00
bde01dc181
FIX: the gcode.3mf cannot display correctly
...
because the empty value of unprintable_filament_map
jira: none
Change-Id: I223fde51e31c2206b81512737058c7015cb10816
2025-03-22 21:10:13 +08:00
7b5818fe6c
ENH: seperate reorder from toolorder construct
...
1.Only do reorder if requseted.In by object mode,we only need
to collect the filaments in the object for filament grouping
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id88f2449c6d3c5d45b9ff87513308d997fa72da1
2025-03-22 21:10:13 +08:00
933adbaaf0
ENH: Add extruder_printable_height
...
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
2025-03-22 21:09:55 +08:00
242554557b
FIX: filament group crash in cli mode
...
1.Always do filament group to get correct filament map
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie4e61c310f6c0cfeacb2a49c4f065f9674b6a35f
2025-03-22 21:09:55 +08:00
02c2fb6f6c
FIX: fix crash of slice
...
jira: none
Change-Id: I68b1557d5a361d175abdff99a0542ca105b76f7f
2025-03-22 21:09:55 +08:00
ea0691f092
FIX: modify the name of high flow
...
jira: none
Change-Id: Icd1a0ac91e957fc38a6f072b1bb3af0c97be398e
2025-03-22 21:09:54 +08:00
6bf3969051
FIX: modify for get pa cali result
...
jira: none
Change-Id: I3c57ccaac3b7e73e0b2eb0e26678635478480298
2025-03-22 21:09:54 +08:00
d050aa4d36
FIX: config: fix some loading issue with filament_self_index
...
1. generate filament_self_index for old files in cli
2. set filament_self_index to default for old files using single extruder
jira: no-jira
Change-Id: I6e3f520723ee7f3a75634121604023ba319ff97a
2025-03-22 21:09:54 +08:00
b495bfd4e9
FIX: fix crash when loading 3mf file
...
jira: none
Change-Id: Ice2a518518994871d23a6f478145edd36f0343a2
2025-03-22 21:09:54 +08:00
695b3c78e4
FIX: Painting displays incorrectly when removing color
...
jira: STUDIO-8657
Change-Id: I0fdfac500716d83f45c73dc07feab032e793e7a5
2025-03-22 21:09:54 +08:00
4e387d4ace
ENH: support auto pa cali for multi_extruder printer
...
jira: none
Change-Id: I835a0e20de81f9af7c40983e00bdb37ea6c95a68
2025-03-22 21:09:20 +08:00
50b3d0097e
ENH: enhance for wipe tower
...
1. modify the start position of wall
2. modify the overlap of wall and infill
3. print wall first
jira:none
Change-Id: I1b3f4a8cb198f84b81aba638cc722dedf84a164c
2025-03-22 21:09:20 +08:00
db8ae4ccb3
NEW:support new nozzle and extder data
...
jira:[new nozzle data]
Change-Id: Ief37b42794ce1469163fcd8227431ec77957508e
2025-03-22 21:09:20 +08:00
8616784886
ENH: use physical extruder map to get ext id
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibfaacfc31863404153a80289bd5cb47d72418060
2025-03-22 21:09:19 +08:00
b45d2f5380
ENH: add map for logic ext to physical ext
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d250de87b3c3d6c9ceb4efd3099c82104e5fc1b
2025-03-22 21:09:19 +08:00
83681128e0
FIX: slice crash with incorrect filament_map of single printer
...
jira: none
Change-Id: I49bdcf03fc8abb24e41e0545e2d9cd3c55941df4
2025-03-22 21:09:19 +08:00
d3c1c36a68
ENH: preheat extruder before filament change
...
1. Pre cooling extruder after the extruder used
2. Pre heating before the extruder used
3. Refine the structure of finalize function
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I98c92763c006fc9564db45a4a5d542b891ea1aa2
2025-03-22 21:09:15 +08:00
28046fbc23
ENH:add layer_filament_list.json record used filaments for each layer
...
jira: none
Change-Id: Ib293ff9fdd284fef9e6de93260e2ba7cc3d66daa
2025-03-22 20:59:25 +08:00
f7a0e66e0d
FIX: modify the filament id for painting color
...
jira: none
Change-Id: I25dcab95f1499783afd892c790f1e18232ea4f72
2025-03-22 20:59:25 +08:00
60cdf3b655
ENH: add tpu check before slicing
...
jira: none
Change-Id: I7d4f053e67f4a4aa22ef990d597d28cb894c4195
2025-03-22 20:59:25 +08:00
f518d6804a
ENH: CLI: support multi-extruder slicing
...
1. add slicing errors for gcode in unprintable area, also for filament mapping
2. use common area for auto arrange
3. support filament_map/filament_map_mode related params
4. add logic to check the filament maps before slicing
5. uptodate support multi-extruder
6. switch new machine/filament support multi-extruder
7. process config params support transfer between mult-extruder and
single-extruder
8. improve machine-limit logic support multi-extruder
9. flush-volume support multi-extruder
10. add default params to support auto mapping slicing
jira: no-jira
Change-Id: Ice39a365841322ddb586d39c56ff923626822528
2025-03-22 20:59:21 +08:00
563e4ca8cf
FIX: wrong flush statistics in sequence mode
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec3557900fce7b3c70e05705f9ea0e987fdff3cd
2025-03-22 20:58:37 +08:00
a289370b19
ENH: save filament sequences in gcode result
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I79c2eb4002c72568d487df417c914ab0b8a14a67
2025-03-22 20:58:37 +08:00
c6ddd329e3
FIX: disable unprintable logic for single ext
...
1.Disable unprintable logic for single extruder printers
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iecb4cc80455288925d3acb5688b81aa9ef1c3a8a
2025-03-22 20:58:36 +08:00
acd6016fc8
FIX: add object id for gcode check
...
and display plater limit error individually
jira: none
Change-Id: Ie6105642667530901be494b344ce853e728ae5fa
2025-03-22 20:58:36 +08:00
2a028aa010
FIX: crash when third flow and PA calibration
...
jira: 8484
Change-Id: Ib4f1d4e38bd0d4af5a43777e2f077381b3887581
2025-03-22 20:58:36 +08:00
1d721f27ec
FIX: modify for interlocking
...
jira: none
Change-Id: I8d68df871f6fffa7b66f27344f3676f90a19e102
2025-03-22 20:58:36 +08:00
a21779dd30
NEW: Port of Cura's multi-material interlocking ( #5775 )
...
* Init port of Cura's MM interlocking
* Refactor a bit
* Fix crash when bottom surface is multi-color
* Fix crash when boundary avoidance is 0
* Add config
---------
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
jira: none
Change-Id: I81cacddf46ad5921a7a2a23fff07cc17addceb6f
2025-03-22 20:58:36 +08:00
e3f4496adf
ENH: modify filament group strategy
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iac837beeb7a5c4684aea38c3e3925a67cd916fe8
2025-03-22 20:58:14 +08:00
21379e1336
ENH: do not consider empty filament
...
1. Do not consider empty filament when selecting group for ams
2. Function "collect_filaments_in_groups" is frequently called,
optimize memory allocation to speed up.
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iad8c9a257bc2dd832c77e650f8c052fb9d8379a0
2025-03-22 20:58:13 +08:00
13df1ee7ba
FIX: invalid pop up when changing machine profile
...
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
2025-03-22 20:58:13 +08:00
6b5a0c2d17
FIX: modify the limit of max_volumetric_speed to 200
...
jira: none
Change-Id: Id84707471d4b34ebda9ff56766e3b058ee6a5021
2025-03-22 20:58:13 +08:00
48023e4c15
FIX: empty filament map
...
1.Caused by uninitialized filament map in mapping for AMS
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I71ce6001fc6f2e72eb9303fcaba0bac16ad70dc9
2025-03-22 20:58:13 +08:00
1379b83846
ENH: Select group that best fit filaments in AMS
...
1.Only consider groups with a distance within the threshold
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I91526a796a0f7f1ed3e77c41076c1f85620dd944
2025-03-22 20:58:13 +08:00
b17c5e7e01
FIX: flush_volume_matrix and flush_multiplier is incorrect
...
jira: none
Change-Id: Ie2d73b90b9ac7f5a6945b2bac859b76d2132f55a
2025-03-22 20:58:13 +08:00
3cfb49a1b9
ENH: refine filament group algorithm
...
1.Use max flow network to handle limit
2.Support setting master extruder id
3.Fix the issue in the KMedoids algorithm where data is overwritten
after each retry.
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idd2bedf39f61e7a65eb4199852f60b8fbebe0a7d
2025-03-22 20:58:12 +08:00
d715353fa6
FIX: fix the crash bug when slicing
...
jira: none
Change-Id: Ieaec4fda4c653e6595322356bd16226640d2e932
2025-03-22 20:54:17 +08:00
20837717d4
FIX: When the printer is inconsistent with the current preset
...
when the ams is 0/0, should not consider the print connect status
jira:none
Change-Id: I2288ff15894d5c734a98b830df6678cab2bd12fc
2025-03-22 20:54:17 +08:00
d9ea1a4b24
FIX: performance issue caused by copy LayerResult
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5f1bda598ef096999a0eda2fa68d2a24c97c22ca
2025-03-22 20:54:17 +08:00
b34395358b
ENH: support virtual G1
...
1.We need virtual G1 command for statistics
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0db0f7f0f0c2d61e43582154e0bd76bd0097c8da
2025-03-22 20:54:16 +08:00
b4d8566332
FIX: crash when ams filament list is empty
...
1.Set the default size of ams filament to 2
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie985ecfa44cb9fcaf21406303e32bb56e731f351
2025-03-22 20:54:16 +08:00
2f11ca8a03
ENH: remove a useless assert
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ief29b7cc8adc16218f1b3608a35448bd95e54c80
2025-03-22 20:54:16 +08:00
0b95bdd9d9
ENH: do another map for ams filaments
...
1.If the group result differs little in flush,we will choose the one
that best fits the ams filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd147b406e3494c841ef13564ad1b1231ad798fd
2025-03-22 20:54:16 +08:00
8472e3011c
ENH: add wall vol speed when filament change
...
1.Add placeholder for outer wall volumetric speed when changing
filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib1d5608f95bc12777db5d848f6b037c27ea0fd03
2025-03-22 20:54:16 +08:00
8c88fabe8f
FIX: missing filament start gcode with 1 color
...
1. Caused by setting the current filament to filaments used
in machine start gcode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If6789b1e02aadc6d03610b7b7cc4c829ae767a7d
2025-03-22 20:54:16 +08:00
51de6253ce
NEW: Add "change filament to"
...
jira: none
Change-Id: Ic5550ed257e03033681de91ebca521390f902f66
2025-03-22 20:54:16 +08:00
913bace1eb
FIX: config: fix the 3mf export invalid issue when using single filament
...
JIRA: no-jira
Change-Id: I1faf1fd7ac2b3dfd99594856e3c84da12d805627
2025-03-22 20:53:56 +08:00
2636e44dc0
ENH: config: add exception when load old invalid 3mf
...
some param has been changed for the multi-extruder
currently we popup an exception
JIRA: no-jira
Change-Id: I1e892203d34c569a580694c1c28a1c7d695c1c64
2025-03-22 20:53:56 +08:00
994e4f4840
ENH: enhance accuracy of weight calculation
...
1.Use float to store the weight copmputed in the procedure.Avoid the
issue where filament weight remains at 0 after changing filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iff0cfc6e22f34affbc232dbfe196f27ee06d2d9e
2025-03-22 20:53:56 +08:00
fec7129437
FIX: modify unprintable_filament_ids should regroup
...
jira: none
Change-Id: Ifb8105f6e301aaed9ca4e62a37b9d3a1616e755b
2025-03-22 20:53:56 +08:00
d56bf872cf
ENH: some fix of previous commit
...
fix to I0c853de6b1938c7e2addbaab5a45b35daf5a32fa
Change-Id: I307f99b301709fd00090dc234c054dacfda2e76a
2025-03-22 20:53:56 +08:00
3b988f6b77
FIX: incorrect print sequence of support filament on first layer
...
jira: none
Change-Id: I893fc773849a5557c138de3f9bd1c3ec1e1978df
2025-03-22 20:53:55 +08:00
85ebb46995
ENH: Add limited filament maps to slice info
...
jira: none
Change-Id: I7b08943ba5f4e7fa9be18ba3f64caee182888d45
2025-03-22 20:53:55 +08:00
a16ec053b4
FIX: get abs value for small perimeter speed
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I686b22f072ad0f87e50ef2321b92daaa3cb0154f
2025-03-22 20:53:55 +08:00
b620a4122e
ENH: Pass ams information for slicing
...
jira: none
Change-Id: I3fe12189b6e8246fd553dcd8659bf7f98e622767
2025-03-22 20:53:55 +08:00
f39eabfd9f
ENH: add tpu check when printing by object
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I366aa8387dfc8d1c94fe836ee4898424d04737c3
2025-03-22 20:53:55 +08:00
885e96d8db
FIX: fix build error
2025-03-22 20:53:55 +08:00
5aecc67874
ENH: some fix of previous commit
...
fix to If495a343efdb1be6f46d11dd20f6ec7934266e87
Change-Id: I9a0afee5c78a23e92c9c76bceff7937bb983918e
2025-03-22 20:53:54 +08:00
c75c10e312
ENH: Add gcode check for multi_extruder
...
jira: none
Change-Id: Iebc43e608c4509eb62b280af2d401fa9e0e089ba
2025-03-22 20:53:54 +08:00
c53a35856d
ENH: add filament cluster algorithm
...
1.Add new KMediods algorithm
2.Consider physical and geometric printables
3.Refine code structure
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I1412835c3c6380f9cedb44ff6914004365bba889
2025-03-22 20:53:54 +08:00
ed61d1d31b
FIX: fix flow ratio calib bug for single extruder printer
...
2. modify the filament_flow_ratio to nullable
jira:none
Change-Id: I3f0569ee643cfe9473c6029ca0e04f4b80c8332e
2025-03-22 20:53:54 +08:00
38b3c32b6a
ENH: flow_ratio cali support multi_extuder
...
jira: none
Change-Id: I03399040a772043d3d20116b0588fd04e0725be1
2025-03-22 20:53:54 +08:00
276c797faf
FIX: remove extra filament change
...
Jira: none
if the fist print filement as same as the filament be set on start gcode
not insert filment change
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0114f287fff9be276a90772537d1910df18dec61
2025-03-22 20:53:54 +08:00
ede9f90a79
ENH: support tpu for multi_extruder
...
jira: none
Change-Id: I556804aadac00406e7214b86f7925170a90c55ce
2025-03-22 20:53:54 +08:00
22feef013c
FIX: model: fix the bbox computing issue when update_instances_print_volume_state
...
JIRA: STUDIO-7498
Change-Id: I80fac3253d1bd6fcc49a4eb08dd68fe2e458c148
2025-03-22 20:53:54 +08:00
62b1d00d1f
ENH: 3dbed: support rendering extruder area with different color
...
JIRA: STUDIO-7494
Change-Id: I717999e8b7ab1d7d350299b412a3a270c6ba7a9e
2025-03-22 20:53:53 +08:00
2d791aea17
ENH: config: set default 'extruder_printable_area' to empty
...
JIRA: no-jira
Change-Id: I5d574a12684281faabbd1cf96e68e9b9ad593edc
2025-03-22 20:53:53 +08:00
e5be69dedd
ENH: dual_extruder: add logic to process extruder_printable_area
...
JIRA: STUDIO-7498
Change-Id: I1cf53db93acf41b06cb1b9569a0679487c9f1e41
2025-03-22 20:53:19 +08:00
2ebd14667e
ENH: add some params for multi extruder
...
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
2025-03-22 20:53:19 +08:00
68ed20dd09
ENH: extruder printable area default to be empty
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If4aad7329cd97141eaec3e438dee165e86536c66
2025-03-22 20:53:19 +08:00
8cf72ab46c
FIX: move the lift gcode from change_filament_gcode to GCode.cpp
...
and delete ;nozzle_change_gcode of change_filament_gcode
jira:none
Change-Id: I79c2896afe15b59ba3932240edcb6330e230470f
2025-03-22 20:53:19 +08:00
c1dec339dd
FIX: modify the filament_change_gcode
...
and set 1/4 max_volumetic_speed for TPU
jira: none
Change-Id: I492ce178a88fb702fc051f8a0abec6a4b5706d00
2025-03-22 20:53:19 +08:00
92fa0ff010
ENH: add ConfigOptionPointsGroups
...
1.Add extruder printable area
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I753344917a67e3d8ac361c15c3d374b5ef951d21
2025-03-22 20:53:18 +08:00
e5d2ea3909
FIX: slice status error when print by object
...
jira: none
Change-Id: Iaa8453cbf79a38984cdae085418165287fee21b1
2025-03-22 20:53:18 +08:00
11f61abefa
ENH: calib support multi_extruder(UI part)
...
jira: none
Change-Id: I3009c2f8b601dc078cfed787dc3531fc1d4848d6
2025-03-22 20:53:18 +08:00
c6251b4d64
FIX: compile warings caused by 64bit shift
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibce8e160a922c266bfb9b6a52fad01466fee8bef
2025-03-22 20:53:17 +08:00
1525c3c3ac
ENH: support custom layer sequence
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I73f030f2009b66aef20e3492f742d85970081e8a
2025-03-22 20:53:17 +08:00
7d4d5f2c9b
ENH: change some params to nullable
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifd91da26d089c78e2d5036e145b7f4404535b7a5
2025-03-22 20:52:56 +08:00
ab81baee92
FIX: wrong placeholder data when filament change
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If6f6db1a2086c17541c7984c2db33d7bbcf21801
2025-03-22 20:52:56 +08:00
706c79f4f4
FIX: G1 F0 in gcode
...
jira: 7631
Change-Id: I247e47756f1382d77f104a6ba97883e01d9d0187
2025-03-22 20:52:55 +08:00
18894bd803
FIX: mistake use of extruder id
...
Should use filament id instead of extruder id
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I669092da6902158ad5f89d4814c78eabdfb2e7c7
2025-03-22 20:52:55 +08:00
9ee85bef34
FIX: enhance filament_map auto manual behavior
...
1. auto mode dragdrop is not allowed
2. not display filament_map when there is no result in auto mode
jira:none
Change-Id: I0800e0d832e27fe459a17bb1aa829b5e72d0ee8f
2025-03-22 20:52:55 +08:00
0716b8518e
ENH: add tool order function
...
1.Use min cost max flow to solve the tool order
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I909845039b67c7fe3ddd42580ad3f1d71d52262d
2025-03-22 20:52:55 +08:00
0f70c81a7d
ENH: optmize code structure of tool order
...
1.Put reorder functions in ToolOrderUtils
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I49c7b447ba1f41f3747ba3127d842c4e3957b5ff
2025-03-22 20:52:55 +08:00
fe8b904e75
ENH: config: add default_nozzle_volume_type in printer
...
1. also remove original nozzle_volume_type from printer
and move into project config
2. support save nozzle_volume_type into appconfig
and load from it at beginning or printer switch
jira: no-jira
Change-Id: I01fc82d142fc633fc59a238796a71b9f8d180efb
2025-03-22 20:52:24 +08:00
8b2a94ed5f
ENH: wipe tower support nozzle change
...
jira: none
Change-Id: I398a508cbc8d02644b60e504405392254329ef10
2025-03-22 20:52:23 +08:00
b49d4ca153
ENH: save multi extruder state in gcode processor
...
1.Save multi extruder state in gcode processor
2.Add machine exturder change time
3.Fix some naming issues
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9785331290515eeb908ff0ff01aad5aac44212d9
2025-03-22 20:51:44 +08:00
5f30ee389e
ENH: config apply_only vector at index
...
Change-Id: I7bf5a44b2d3db2e21207696b6ef7e41a499da078
Jira: STUDIO-7747
2025-03-22 20:41:57 +08:00
2dbc5c9396
ENH: add manual grouping mode stats
...
1.In auto mode,display the statistics of auto mode and single
extruder
2.In manual mode,display the statistics of manual mode and auto mode
3.Support by object mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If54c4db79f33d5278c0f18d01ab0518e8660f9c7
2025-03-22 20:40:26 +08:00
0756b51eb2
FIX: wrong filament map in layer filament
...
1.Should calculate cost if filament used in that layer is 1,because
we should consider the last filament used in previous layer
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5838af77f1d73bfa07c65bd6ee12ae352dc3b571
2025-03-22 20:40:26 +08:00
c49c0c8f72
ENH: modify forcast limit number
...
1.Use forcast when filament num in current layer and next layer both
smaller than limit number
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia21bb22ce353f0c74eeaf748c6d9f9c4b315ec18
2025-03-22 20:40:25 +08:00
0917202733
FIX: crash when opening makerworld model
...
jira: none
Change-Id: Ib0b04584748181cce8b23dc44b247f2ade225a26
2025-03-22 20:40:25 +08:00
ad65cdb909
ENH: add filament saved by multi extruder
...
1.Add filament flush,filament change count reduced by multi
extruder
NTOE: cases when printing by object haven't been handled
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iaaea5f8ffae2345df5a6f1dc605342d835974d48
2025-03-22 20:40:25 +08:00
3a55a3a1ee
FIX: context: fix the .gcode.3mf not shown issue
...
filament_self_index difference caused
JIRA: no-jira
Change-Id: Ia70fe8a8095b8067fe13bbfc9e5c39d9f3ee05d3
2025-03-22 20:40:25 +08:00
3167e34e60
ENH: add greedy algorithm for filament reorder
...
1.When n becomes large,the original algorithm to get best filament
sequence will cost too much time and memory.Use a greedy algorithm
instead.Always select the next filament with fewest flush
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iabc924e1bdb0a07af0a6ef0bbdd62e54ce54f052
2025-03-22 20:32:28 +08:00
adf208dbb9
FIX: multi extruder percent param
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I98d2f1df419bbf815efa5a2f0f48656a71ef15ab
2025-03-22 20:32:28 +08:00
f122c4f4ef
ENH: config: refine some small logic
...
1. always resize filament count when not matched in full_fff_print
2. remove no-use codes in Preset::normalize
jira: no-jira
Change-Id: Ie15a5977d28f28e0f63ba84f27f98f77d16665c0
2025-03-22 20:32:28 +08:00
7ce2bb70df
FIX: mistake in profiles
...
1.Spelling mistake in long retraction
2.Some params length change to 4
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8952df7a1bbf060471e24a19eaeddde017d17d82
2025-03-22 20:32:28 +08:00
1745657e22
FIX: filament variant index & override nil value
...
Change-Id: I828fff09df39a60d59af516c969466d9b09e503f
Jira: none
2025-03-22 20:32:28 +08:00
e95179427f
FIX: unable to custom first layer filament order
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0107ebf6a85ea0deba93ff558835138981365670
2025-03-22 20:32:28 +08:00
16cadec565
ENH: add grab length
...
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
2025-03-22 20:32:27 +08:00
887ca8f45f
ENH: enable long retraction for multi_extruder
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I41daa7a5f1eabf0a805a86d72d00544c8f4edb4a
2025-03-22 20:32:27 +08:00
da32b878b3
ENH: add extruder_ams_count behavior
...
1. save to appconfig and project setting
2. use it to group
jira: none
Change-Id: Id4048fc1b47f6904b2e9c0154aaa3a2b03590437
2025-03-22 20:32:27 +08:00
67f67d7688
NEW: Add FilamentMapDialog
...
support drag drop to modify the filament map
jira: none
Change-Id: I0ed3180a0fa8e95e7c871bb039eb844faccd1344
2025-03-22 20:32:27 +08:00
cffb4a8564
ENH: optimize filament group algorithm
...
1.When filament <10, do the reorder with next layer.This can reduce
10% flush in some cases
2.Support custom filament seq
3.Use caches to speed the algorithm
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie1af9841f7165802d350eae962efe8febafbb357
2025-03-22 20:32:27 +08:00
cddf8cae27
ENH: add filament group strategy
...
1.When capacity is greater than the num of filaments, always choose the
map result that can be accommodated
2.In BestFit strategy,always try to fill up the existing capacity
3.In BestCost strategy, just try the group with fewest flush
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifd6d64b77774039e57ffff26cf2243a4d3f89054
2025-03-22 20:32:26 +08:00
8232a716e6
FIX: fix bug when delete filament
...
update filament of HeightRange
jira: none
Change-Id: I62cb21a65ecdfc36e8bc7d0915a85ecba578e49f
2025-03-22 20:32:26 +08:00
ed98163973
FIX: save filament_maps to slice_info
...
and fix bug when switching printer preset between single-nozzle and double-nozzle, prompt the modification of extruder_count
jira:none
Change-Id: I1d5f0b2f002493378d2f482d08cfd5a72b35b99f
2025-03-22 20:32:26 +08:00
3179fd416e
ENH: config: add logic to apply params to object/region config with multi-extruder
...
JIRA: no-jira
Change-Id: Ieab98cd8d031e5ca82a3aad2d0b89d8ae4a794f1
2025-03-22 20:32:26 +08:00
cc81e57ac9
FIX: compatible with one extruder reorder
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7e350ba8728ac4b3dd34093ff4e9647d0a2ba671
2025-03-22 20:32:26 +08:00
7128e2925a
FIX: logic error in filament change
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7e2b1333d4b82e4495375fcf4daec3aea08be445
2025-03-22 20:32:26 +08:00
0434853bf3
ENH: config: remove unused custome_defined logic
...
also improve project_embedded
1. remove unused is_custom_defined
2. improve project_embedded to support multi-extruder diff
jira: no-jira
Change-Id: I1db28c3cfd59ccc31c6855af30305396c71c4e9a
2025-03-22 20:32:26 +08:00
ad03fae1eb
FIX: Clean up the code
...
1. Refactor recommended code for print by object
2. Calibration adaptation sends print command
jira: none
Change-Id: I24fd92d6aca07a7067e09bb200854e5bec72a324
2025-03-22 20:32:26 +08:00
1ab2964ee3
ENH: alternate multi-head printing sequence
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I739438e8c411b638571d5291f3e5ad3d54650a73
2025-03-22 20:32:26 +08:00
f1b0805ed1
FIX: wrong flush logic
...
1.Fix flush calc logic
2.Rename m_extruder in GCodeWriter
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I38f023fbad983305632ca62cbfb3909759013c25
2025-03-22 20:32:25 +08:00
9ec276d3d7
ENH: new filament group algorithm
...
1.When n<10, calc all case cost
2.When n>10, first k-medoids algorithm first
3.Enable setting group size
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I625f47e0235c70e440c6d489b052a156fbffca3f
2025-03-22 20:32:25 +08:00
326d7d28b4
FIX: fix build error
...
jira: none
Change-Id: I97df69b728fc3871b7c33e1fd3ba068e741d51c7
2025-03-22 20:32:25 +08:00
21e6271e59
ENH: calib support multi_extruder
...
1. backend support multi_extrude data structure
2. Compatible with third-party calibration
3. fix bug when get extruder in gocde export process
Change-Id: I5dac9abdd9907a521a1ba9b480f9e05640591bc1
2025-03-22 20:32:25 +08:00
7b7ebf1b95
ENH: config: add the extruder variant apply logic in Print::Apply()
...
we need to keep the original values and update after pre-slice
jira: no-jira
Change-Id: I232d3c43340b4a23bc42121bd05380746e736f20
2025-03-22 20:32:25 +08:00
4086ec60c2
ENH: config: add some miss codes
...
previous commit 'ENH: config: add nill load/save logic for user config' jira: no-jira
Change-Id: I91ab326e533d54846518d11b457db0b0afe4d499
2025-03-22 20:31:45 +08:00
603f93d97f
ENH: config: add nill load/save logic for user config
...
Change-Id: I8da6c5b345cc088862f2c720aeb742b9617ff3e7
2025-03-22 20:31:45 +08:00
3c32b2c5a6
ENH: enable params with silent mode
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id46fa5de3a58e0fd3c3b0aa28524a03ca9a38f1a
2025-03-22 20:31:45 +08:00
7e7e872366
FIX: config deep compare & plate config extruder switch
...
Change-Id: Iae1716e6511e252f131ab4355f9521d7611d7133
2025-03-22 20:31:45 +08:00
582b2d470f
ENH: edit object config variant value
...
Change-Id: I97490f555a8a2848ccea78f74d79f71b0e93b36d
2025-03-22 20:31:44 +08:00
b42d94e1d0
ENH: support recommended filament map when print by object
...
1. support recommended filament map when print by object
2. placeholder_parser support function filament_change
3. extruder_id of filament_map is start from 1
Change-Id: Ide8019cd4a165a25972f22706ff685c3005aa031
2025-03-22 20:31:44 +08:00
5defd2b7c3
ENH: config: add extrudrer variant check logic
...
when load config from 3mf
Change-Id: I946ba777853e479418fcd1b49209f75ed41f33f3
2025-03-22 20:31:44 +08:00
dcd9fd5013
FIX: backend get the extruder id based on filament_map
...
Change-Id: Ib7679c0fc67336e462467dab9f5b4d4684d6eb19
2025-03-22 20:31:44 +08:00
366a14d8f7
FIX: parameters modify of printer preset
...
Ensure correct behavior when modifying parameters of printer preset
Change-Id: Ic627a8e202bf4224b742336cc43ac611ddc5c997
2025-03-22 20:31:43 +08:00
8c8c9a967b
ENH: Add recommend filament maps method
...
Change-Id: I3945a8b9f0a57e10a1d230003f21c9877cc5f342
2025-03-22 20:31:43 +08:00
e770043c4d
ENH: add stride in get_index_for_extruder
...
JIRA: no-jira
Change-Id: If529296bf6d35edc35aee3ff497184dce70332d1
2025-03-22 20:31:43 +08:00
bbc4d701bf
ENH: add check logic of filament_map when Print::Apply
...
Change-Id: Ibab353c4b16183611d63d75bcdf5f370cb578f21
2025-03-22 20:31:43 +08:00
e9081ba8d4
ENH: filament: delete filament_extruder_id related logic
...
jira: no jira
Change-Id: Ie0d8e31a6a3eef0400b3ba6238f817bad4daca24
2025-03-22 20:31:43 +08:00
5b0d525957
ENH: Display and modification of printer presets
...
Change-Id: I6a38704864fd4994a845686a299bec67f1b9b9b3
2025-03-22 20:31:43 +08:00
b0e3ab037e
ENH: config: add filament_maps in partplate
...
Change-Id: I1183830788e703f1d33a8a4b620b58b822283dd4
2025-03-22 20:31:43 +08:00
f3d67a98ac
ENH: support delete any filament id
...
Change-Id: I71bcd54985b3f9e19a19d04327d00b402ec22380
2025-03-22 20:31:42 +08:00
6fbad9ed33
ENH: flush_volume support multi_extruder and fix bug
...
Change-Id: Id6b041f71ee6e55e68a6937f24ce791caac8e708
2025-03-22 20:31:42 +08:00
8b2544df41
FIX: Use the same api to get the extruder id
...
jira: none
Change-Id: I05b3040b176374deee3e95bc52364fe7b33bb257
2025-03-22 20:31:42 +08:00
8af6f6d13b
ENH: implement mult extruder params
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I906b106aa4c73272a418528db0e964d9130b0dd7
2025-03-22 20:31:42 +08:00
03058ba29d
NEW: config: add logic in config system to support multiple extruder
...
1. add nozzle_volume_type
2. add extruder_variant_list
3. add printer_extruder_variant,print_extruder_variant, filament_extruder_variant
4. construct backend fullprintconfig
Change-Id: I50659634e2cde363112ff5ded6c199d7548c6f2f
2025-03-22 20:31:42 +08:00
e1d1d3e8ca
FIX: support more than 16 extruders
...
jira: none
Change-Id: I169f672b99088b0a0a0132265d958e3239051744
2025-03-22 20:30:23 +08:00
6b09cfee71
FIX: modify parameter type of process preset
...
jira: none
Change-Id: I5c973a29e5b983e3f480d55aeeb2b14d13e950ee
2025-03-22 20:30:22 +08:00
7da565f058
ENH: remove the appended T cmd after change filament
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id5da64626b7343a71dcb38c06f5b5caf43ec40e2
2025-03-22 20:28:08 +08:00
0848c26da9
ENH:support new amsmapping data
...
jira:[for 2 extruder]
Change-Id: Ie03eae17d600bc68451511a0179f20d1919ff6ea
2025-03-22 20:27:35 +08:00
48c1710acf
NEW:add "camera navigation" function
...
jira:none
code is from OrcaSlicer, thanks for OrcaSlicer and Noisyfox
commit bf4d59a6764ddadd23ae566bf178f98e06bc3b5c
Author: Noisyfox <timemanager.rick@gmail.com>
Date: Tue Feb 27 21:57:31 2024 +0800
QoL: 3D navigator (#4181 )
Change-Id: I19f83d6dd7244c4daaa9c9993378cbd90333c3b9
(cherry picked from commit 74903968fdc8bd25ab48a722f893c38c801417d3)
2025-03-22 20:21:52 +08:00
c74a769c14
NEW:add "extruder_only_area" textures for
...
double extruder machine
jira:none
Change-Id: Iaf4118fb00641537838dae7cc5fdaaf07ccc9851
(cherry picked from commit a8d6c9fe8976dbcb79c1f89efb7107073cb17856)
2025-03-22 20:21:52 +08:00
8541f5e893
FIX:use flip_triangles when mesh volume < 0
...
jira: none
Change-Id: I682c737398f347a3243b6202132aae65d5415bdf
2025-03-22 20:21:24 +08:00
cd3f05b3fe
FIX: crash while the first layer is empty
...
Github: 5376
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I64a0612ec4bf1ead099029db5f8e9f59e0b704af
2025-03-22 20:18:26 +08:00
abb8e6ed11
FIX:No brim ears generated if brim width is set to 0
...
GITHUB: #5431
Change-Id: Ia5911b1e24f09e385a66c3a0cdb3fe83fb090f57
(cherry picked from commit 1f419489f76209e47babe6b378c436178fcb3264)
2025-03-22 20:18:04 +08:00
b952006e4d
FIX: prevent dead loop of conflict checker
...
jira: STUDIO-10282
Change-Id: I5722e9967cdd83cde5ef59aee37b0f7019e53d89
2025-02-25 11:48:03 +08:00
2eace660e8
ENH: add limit for smooth_coefficient
...
Jira: 10274
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9e288de79b38af6baf93263ccbb452c8996430ba
2025-02-18 17:19:01 +08:00
da8474882b
FIX: no infill in raft layers
...
jira: STUDIO-10175
Change-Id: I96cd7b0ae5a5f030cda3e3ea71c7c56b1752357a
(cherry picked from commit efa4114715f162c8e6714fbe2804620da7aaa1bd)
2025-02-18 17:19:01 +08:00
7020256f59
ENH: seperate flush time from other types
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4cfeaec770de678b8dac405617b32738a3f68b3d
2025-02-18 17:19:01 +08:00
626f1390b2
libslic3r: Fix BOOST_LOG_TRIVIAL declaration
...
In file included from /run/build/BambuStudio/src/slic3r/GUI/Gizmos/GLGizmoMeshBoolean.cpp:5:
/run/build/BambuStudio/src/libslic3r/CSGMesh/PerformCSGMeshBooleans.hpp: In lambda function:
/run/build/BambuStudio/src/libslic3r/CSGMesh/PerformCSGMeshBooleans.hpp:281:35: error: ‘info’ was not declared in this scope; did you mean ‘tbb::v1::info’?
281 | BOOST_LOG_TRIVIAL(info) << "check_csgmesh_booleans fails! mesh " << i << "/" << csgrange.size() << " is empty, cannot do boolean!";
| ^~~~
| tbb::v1::info
/run/build/BambuStudio/src/libslic3r/CSGMesh/PerformCSGMeshBooleans.hpp:295:35: error: ‘info’ was not declared in this scope; did you mean ‘tbb::v1::info’?
295 | BOOST_LOG_TRIVIAL(info) << "check_csgmesh_booleans fails! mesh " << i << "/" << csgrange.size() << " does_self_intersect is true, cannot do boolean!";
| ^~~~
| tbb::v1::info
2025-01-13 10:22:01 +08:00
db1bbc967a
FIX: export 3mf fail in creality machine
...
1. Add place holder support
github:#5557,#5614,#5471
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I65e1d116b7af64ab15c3338f713fc3329b3e877d
2025-01-09 19:32:26 +08:00
def9223e6e
ENH: optimize one message
...
JIRA: STUDIO-9527
Change-Id: I789e04a1727b16a8de8eac975ef6a3fea5c59d56
Signed-off-by: Stone Li <stone.li@bambulab.com>
2025-01-09 19:32:26 +08:00
97de4e87cf
ENH: reduce organic tree support log level
...
jira: none
Change-Id: I17b876d88974e632c592bd36f3fea700a51f86be
2025-01-09 19:32:26 +08:00
0d1bdab97d
FIX: fix the bug of missing layers in SlimTree and HybridTree
...
jira: STUDIO-8756
Change-Id: I12c09ec2e3c1a2ee138472ff7c63675d0ee26ba0
(cherry picked from commit 36d80e7b24a4bdcce2d3957e0fd3ea61c8dc6bdc)
2025-01-09 19:32:26 +08:00
849d41576c
FIX: top z distance disappears in some cases
...
jira: STUDIO-8883
github: #5334
Change-Id: Ie70f6dada19cc17cd74fa6aa116d1ca4fb4a07d7
2025-01-09 19:32:26 +08:00
7665aeb69c
FIX: sharp tail miss detection
...
jira: STUDIO-7973
Change-Id: I76b0dc56fe6cf44bacad4c35874695efee29c2f9
(cherry picked from commit 3fe1728f40e2a09340b061681895e4691bd1a8f7)
2025-01-09 19:32:26 +08:00
c331b61cab
FIX: merge support interfaces into a continuous large one
...
jira: STUDIO-8611
github: #5132
Change-Id: I12ee4a9f88a78304a98f354bfaa92e2a05f19ec2
(cherry picked from commit b7c8c7e8feb199b01f52e1fbfbba4469657db3b7)
2025-01-09 19:32:26 +08:00
ca3a372630
FIX: gizmo boolean crashes due to self-intersection
...
Check if boolean operation is possible first, just like in context menu.
jira: STUDIO-6471
Change-Id: I9c201010dad90bbfa615178aa835c7e371755cd2
(cherry picked from commit db8a02e8328b5529123fb83c0373eb01cb925f0a)
2025-01-09 19:32:26 +08:00
f774fda6e6
FIX: inconsistent infill in hybrid tree support
...
jira: STUDIO-9058
Change-Id: I62f6225d33708e8a161600930c6e0dff229f5995
2025-01-09 19:32:26 +08:00
5e476a1385
FIX: apply xy_expansion after support blocker
...
jira: STUDIO-9040
Change-Id: I30e09a67047f651a547082bff737524aba940f19
2025-01-09 19:32:26 +08:00
a0669137ec
NEW:step mesh add 'Split compound and compsolid'
...
Optimize getting STEP node names.
Fix load_same_type_files()
GITHUB: #5214
Change-Id: I7d1035c122f21e3b08305509489bce415634ae80
(cherry picked from commit 76a401bfca1897994795cb37ffa9cbcbdaca8b6c)
2025-01-09 19:32:26 +08:00
837c962dfb
NEW:reeedit text and keep old pose
...
jira: none
Change-Id: If0051293d23f4f4f57c5ed28688e97220521df90
(cherry picked from commit 37bb124eb45cb3d94404ce3e3789e82c8d01207c)
2025-01-09 19:32:26 +08:00
496d69f9d1
FIX:add "absolute rotation" in rotate gizmo
...
jira: STUDIO-8726
Change-Id: I23deb4ab11cf24ca4f0f0c5a35a74268c34f60f6
(cherry picked from commit d26b8f9fcadf8f7709a302991e43be711560e84e)
2025-01-09 19:32:26 +08:00
0e84f6acc7
FIX:import single_svg and split it(default)
...
jira: none
Change-Id: I1d59a41fa7392fa3659ceae36c81a92d5f9dd5c6
2025-01-09 19:32:26 +08:00
c1179de25a
FIX:"split to parts" should consider scale_det
...
jira: STUDIO-8789
Change-Id: Id1b224f9e5dc2666fc4364fccde0cd79eb164f05
2025-01-09 19:32:26 +08:00
8e52c9a86f
FIX:delete xmlns:BambuStudio in model_settings.config
...
jira: none
Change-Id: I050d75236c1085d296e2be0779c8bf7d46307d80
2025-01-09 19:32:26 +08:00
5ca85c6fc6
FIX:add xmlns:BambuStudio in model_settings.config
...
jira: none
Change-Id: I703b8cef7fc591fc84496e4c383cac4a4d543bda
2025-01-09 19:32:26 +08:00
fd4184fa48
NEW:save FACE_COUNT in 3mf
...
jira: STUDIO-8913
Change-Id: I0eeae470a292f68863f829121610bacf9fc0d3e0
2025-01-09 19:32:26 +08:00
710935293b
FIX: config: remove src/libslic3r/PrintConfig.cpp in ignore list
...
jira: no-jira
Change-Id: I03c37f33fc6ae0f4d7fdb9c18d52c501d0f7fad6
2025-01-09 19:32:26 +08:00
d4bc450af6
FIX: protect when support_style doesnt match type
...
jira: STUDIO-8800
Change-Id: I7d42f95ba43b4b3a47a83ae59afaaf9bc94baa5d
2025-01-09 19:32:26 +08:00
ba07c4e5d7
Fixed tooltip for cool plate initial layer temp.
2024-11-19 15:44:18 +08:00
bf59a28361
Fix typo: wip action -> wipe action
2024-11-18 08:32:51 +08:00
2308e2038e
FIX: wrong use of reverse iter
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I914f082f378b3cd195b1e69e166409d7302791d2
2024-11-15 19:17:32 +08:00
95f24a906e
FIX: pause layer not working
...
1.The stored layer height differs too much from the generated layer
height.Use a more direct way to locate the layer
github:5253,5275
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie2428e700c72386349a4f2d64076c940ac4eea71
2024-11-15 19:17:32 +08:00
6caacd170f
FIX:add "enable_opengl_multi_instance" option
...
jira: none
Change-Id: I424a1914811cc8eb1a7a717a4117453a69111e8b
2024-11-15 19:17:32 +08:00
7e96406ee9
ENH: adjust scarf seam angle check threshold
...
Jira: 8724
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id27767d07cc5ac6dcade6f9dccfea46cbcda2dbc
2024-11-15 19:17:32 +08:00
2caffbc573
FIX:add "split mesh and save relationship" api
...
jira: none
Change-Id: Ib4c225b7fb75a27bd74f1a60b8842cbc4880e4f6
2024-11-15 19:17:32 +08:00
a680c3ee1f
FIX:The linear and angle parameters in the config
...
file are incorrectly initialized
jira: STUDIO-8679
Change-Id: If592f7ab96d897afa22ef0b039b1541dfb29ecfc
2024-11-12 15:35:32 +08:00
0cce6619ce
ENH:Add 'Don't show again' to the step mesh
...
jira: STUDIO-8606
Change-Id: I2382b9052e2c994a458ad36ca61eb94c517927c6
2024-11-12 15:35:32 +08:00
54bbd63891
FIX:mesh volume should be positive
...
jira: none
Change-Id: I37cc0afbb1791208b6f6c0829014f44da1c1701e
2024-11-12 15:35:32 +08:00
ff02a5e2ac
ENH: update param name
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ibb2cc4316fd4ff9b7b1d071544567971d0ad9004
2024-11-12 15:35:32 +08:00
xun.zhang
qing.zhang
zhimin.zeng
lane.wei
tao wang
Noisyfox
chunmao.guo
zhou.xu
Mack
Arthur
jiaxi.chen
Bastien Nocera
Stone Li
Shane Qi
James Stanley