jiangkai.zhao
fb9f9f41e6
ENH: change solid layer count
...
and reduce the toolchange speed if it occurs at the contact surface
jira: none
Change-Id: Ic238671366145bc7bff76d18d20c104a201a1f17
2025-03-24 08:35:23 +08:00
zhou.xu
a7ad6dfac4
ENH:Optimize interface display in "sync ams" dialog
...
jira: none
Change-Id: I51e8a55491112653e8e55eed0d6c93c6a37dcbe0
2025-03-24 08:35:22 +08:00
qing.zhang
908ac599fc
ENH: translate
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8263638631611f0efbe0f4a9440378701e6ba743
2025-03-24 08:35:22 +08:00
xin.zhang
d4d4b76ce5
FIX: prevent the dialog in macOS
...
jira: [STUDIO-10386]
Change-Id: I19c5df3c2c110979d57190c9219f76f6f6911f85
2025-03-24 08:35:22 +08:00
qing.zhang
b547933f14
ENH: change param's label
...
Jira: none
use Smoothing wall speed alone Z for better understanding
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idaa4241feb4bb91d30e94c8522b58f1147c8009e
2025-03-24 08:35:22 +08:00
gerrit
754874902a
ci: update network module based on commit c28d89a
...
Change-Id: Ifed73694323e218281e06dd2312405ca50a3c5fd
2025-03-24 08:35:22 +08:00
xun.zhang
d9f919fe57
ENH: some post change for slice all group logic
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I03d5ef5c389dcbe2ca838c0b4875e214b5591430
2025-03-24 08:35:22 +08:00
qing.zhang
6e9cb17dd3
ENH: dulicate setting id and error preset file
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I07e6fe63f7272134f5d113c14bd7b32eb620fa27
2025-03-24 08:35:22 +08:00
xin.zhang
45d2d3fc9b
FIX: update some translation
...
jira: [none]
Change-Id: I76afc7adb4f882bcd64c266cb10160333ce439d6
2025-03-24 08:34:32 +08:00
lane.wei
bc5514bbab
ENH: config: allow invisible preset to be selected
...
when switch printer, we found some filament preset not visible
and we need to allow it to be selected
jira: STUDIO-9979
Change-Id: I9613747a755f449c2f48563082b6893e426f37ea
2025-03-24 08:34:32 +08:00
jiaxi.chen
aeba1ebfa2
ENH: set filler_angle of roof layers to interlace with bottom bridge
...
jira: STUDIO-10239
Change-Id: I8dfebb289b30293a39f9737073e992e97b4b46d4
2025-03-24 08:34:32 +08:00
xun.zhang
547cfe75d0
ENH: update translations
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4b7f1518a4805c5c5debdc6ad5b059b75effe4ce
2025-03-24 08:34:31 +08:00
xun.zhang
82d13205d5
FIX: h2d do not support timelapse in sprial mode
...
jira:STUDIO-10402
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5d012a4665bf5715d90fcb973a589d3a500ded13
2025-03-24 08:34:31 +08:00
xun.zhang
d15fc37ff2
ENH: enhance filament group alogrithm
...
1. Try to merge filaments before grouping
2. Set max match num for machine filamnet in match mode
jira:STUDIO-10392
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2451d838e07ee02f493fda4dc702f3d13b2ad37b
2025-03-24 08:34:31 +08:00
xun.zhang
f042c817a7
ENH: refine logic with filament group
...
1. In slice plate mode,force use plate mode
2. In slice all mode, force use global mode
jira:STUDIO-10390
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3edb559043fdc52339b7f611643b8f5ac116571d
2025-03-24 08:34:31 +08:00
zhimin.zeng
0381d5827c
FIX: fix wrong retract when change filament
...
jira: none
Change-Id: I6bf6d4620234d9c7b5246126bfdcdf8b5e1944e3
2025-03-24 08:34:31 +08:00
qing.zhang
fb5bf37336
ENH: change infill params' name
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I864f24a335d59b4ee6ae474c9a338cd2fbc2ebf1
2025-03-24 08:34:31 +08:00
zhou.xu
2e0a953610
FIX:update dialog position when mainframe position changed
...
jira: STUDIO-10397
Change-Id: I86cb4698518119903dd7fa3f7c2ad1945804f533
2025-03-24 08:34:31 +08:00
jiangkai.zhao
ed7bfd3ff6
ENH: add solid infill before nozzlechange
...
and set the contact surfaces of different material types as solid,
and reduce the nozzlechange speed if it occurs at the contact surface,
and recuce the toolchange speed if it occurs at the contact surface.
jira: none
Change-Id: I884d60f4114544dfa959bd654ecc985f5fb9aac4
2025-03-24 08:34:30 +08:00
jiangkai.zhao
7d48561817
Fix: error wipe when no finish_block_tcr
...
jira: none
Change-Id: I0890089661a719f728c5fbc5254cf53f047d7248
2025-03-24 08:34:30 +08:00
zhimin.zeng
fde94de17b
FIX: error travel when start print TPU
...
jira: none
Change-Id: I0ccabf460afca03662249c97d6f2e01e05120509
2025-03-24 08:34:30 +08:00
zhimin.zeng
b549be3180
FIX: fix the printer drop-down list stuck problem
...
jira: none
Change-Id: I69927a3dc1c2e2f562cbfc47bc5fcf99d0833cdb
2025-03-24 08:34:30 +08:00
Arthur
93d98a6a69
FIX: crash when raft = 1 && has wipe tower
...
jira: STUDIO-10265
Change-Id: I2f932b2cffad6b16075adda95ebd8c453beea753
(cherry picked from commit 27c18dca4130f872ea96dbb3b321b9dcee1f1068)
2025-03-24 08:34:30 +08:00
xin.zhang
16729c9283
FIX: update some text
...
jira: [STUDIO-10352]
Change-Id: I33b02a811970002b5f05ee2e519eb722b19e7051
2025-03-24 08:34:30 +08:00
qing.zhang
872726abed
ENH: add cross zag pattern
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If11f423db443b3f31f2181d4b0c56eaeb9a7ca5d
2025-03-24 08:34:30 +08:00
qing.zhang
d69fce58cb
FIX: error overhang on auto circle compensation
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8281f617cc4dde848d4dd795fe9afc7b2b8c72ce
2025-03-24 08:34:30 +08:00
zhou.xu
93d0c59ed0
FIX:add "check_empty_project" api
...
jira: none
Change-Id: Ic0b0b558c8786749b1ac036b87dc08519002b17f
2025-03-24 08:34:30 +08:00
xin.zhang
86e31adc76
FIX: add the include
...
jira: [none]
Change-Id: I869ddb0af7ea425099bdd3467e31cf2f8f5ef562
2025-03-24 08:34:30 +08:00
Arthur
2debc31c4d
ENH: fixed crash issue of lightning infill of tree support
...
Use clipper2 and remove colinear points.
Later on we can try to set lightning infill as the default infill pattern of tree support.
jira: none
Change-Id: Id545b15d778071cec6e56d212ab68db1ab90ad2a
2025-03-24 08:34:30 +08:00
xin.zhang
26881072a4
FIX: champer_switch_head_dlg->ShowModal() may wake up another wxCUSTOMEVT_SET_TEMP_FINISH, break the chain
...
jira: [STUDIO-10386]
Change-Id: I2debe9eebf455e4adbe9161945ce84508f594f9d
2025-03-24 08:34:30 +08:00
Mack
3fb7d857d5
Fix:icon center
...
jira: STUDIO-10393
Change-Id: Iec33b3e689b8bbf4749ead21f830ba7b6521ee2e
2025-03-24 08:34:29 +08:00
chunmao.guo
0b4795fd10
FIX: get_similar_printer_preset only visit system preset
...
Change-Id: Ib219e76cba37ace7b81f69e63f4edd1edb25ddc4
Jira: STUDIO-10338
2025-03-24 08:34:29 +08:00
chunmao.guo
5ad7576ce7
FIX: MediaPlayCtrl auto stop when not printing
...
Change-Id: I657c5fe85e9192d76cf846ae8243e36a6463623a
Jira: STUDIO-10337
2025-03-24 08:34:29 +08:00
chunmao.guo
b50bde834d
FIX: extruder_sync.svg
...
Change-Id: Ia83235ad231ed94d71075223539b1f6a007c0651
Jira: none
2025-03-24 08:34:29 +08:00
chunmao.guo
c52e54e58a
FIX: reduce ams update
...
Change-Id: I6a3c34580df77135c3b56e9273edc7643d58eec3
Jira: STUDIO-10383
2025-03-24 08:34:29 +08:00
qing.zhang
09c0b004cd
ENH: update H2D filament retraction of matte
...
Jira: 9900
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9e8f962796b7301fff7c8ae4e74db548771bd14e
2025-03-24 08:34:29 +08:00
Lukáš Hejl
ff7eb25c54
NEW: port Zig Zag infill from Prusa
...
Thanks to Prusa!
jira: none
original commit message:
ceb13b1faa33ac096fe7ffd89aa222abca119e02
SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
2025-03-24 08:34:29 +08:00
zhou.xu
91df890100
ENH:Fix the issues discovered in the demo
...
jira: STUDIO-10384 STUDIO-10385 STUDIO-10387
Change-Id: I68f3099b9fbb6d6996373cae07b2e62930ce614c
2025-03-24 08:34:29 +08:00
xin.zhang
d30ca5baa0
FIX: update the filament name
...
jira: [STUDIO-10348]
Change-Id: Id2762188eaf84ad7534a3d6063e0df8c000dd817
2025-03-24 08:34:29 +08:00
xun.zhang
16813aa460
FIX: missing gcode line caused by gcode GCodeEditor
...
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
2025-03-24 08:34:29 +08:00
xun.zhang
3d5fb11527
ENH: add zh-cn version slice vedio
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie96e0b1503138de9e2910e20d07ca3976dacfdf5
2025-03-24 08:34:28 +08:00
zhou.xu
4d934184e3
FIX:Display the interface then create big_bed_image_popup
...
jira: none
Change-Id: I020b72b71283a6873dcc2b4cd6fcf9ae98c6d0a4
2025-03-24 08:34:27 +08:00
Arthur
c414e51999
FIX: several auto arranging bugs
...
1. fill bed crash (jira: STUDIO-10350)
2. reset arranging settings gives wrong sequential printing order (jira: STUDIO-10346)
3. do not show "arranging done" message when there is no model
Change-Id: Ic1c7eac75e3917b9f1d87ab6acc403f78e0c9f7c
2025-03-24 08:34:27 +08:00
zhimin.zeng
65267b9866
FIX: the color of volume is incorrect when merging filament
...
jira: none
Change-Id: I13a9d02b1c8ee57e689ce6477b7aebb86c5f7673
2025-03-24 08:34:27 +08:00
zhimin.zeng
5c56b43166
FIX: fix some wipe tower issue
...
1. the nozzle change gcode use double perimeter width
2. fix the error layer height for adaptive layer height
3. limit the nozzle change speed to 50 when a bridge is detected
4. fix the error extrusion flow for filament change gcode when a bridge is detected
jira: STUDIO-10269
Change-Id: I580c618555fe19d000a56e2510a42004722c1b8b
2025-03-24 08:34:27 +08:00
gerrit
68b241279d
ci: update network module based on commit 650c1e9
...
Change-Id: Iba44a55034c6a7bb1292695e8315415f4726aa8f
2025-03-24 08:34:01 +08:00
zhou.xu
be4585ed98
FIX:Unmatched color use original color
...
jira: STUDIO-10361
Change-Id: I7b19a56c3bbe06ce6a8ef783a824251700c9924c
2025-03-24 08:34:01 +08:00
Mack
fa59afd9f8
ENH:change other filament icon
...
jira: STUDIO-10344
Change-Id: I008f2cd1aace5ee4c4d65ffc8b53c4d5bd866bc9
2025-03-24 08:34:01 +08:00
gerrit
79fec609c5
ci: update network module based on commit 85b4a67
...
Change-Id: Ic13c510b2c90a2e8487847b9ed5d498c7b426c1f
2025-03-24 08:34:01 +08:00
gerrit
dc4dd02cbe
ci: update network module based on commit 78d9ee8
...
Change-Id: I93be8e3c6b4b15bca0f728fdd9c4ad0001c2b57d
2025-03-24 08:34:01 +08:00