1. Add a option to prevent support interface filament being used in
support body
jira:STUDIO-4847
Change-Id: Ic6e9f663b71a7e4d9cd1bca399c0da2ce22bb5b5
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
1. Option "assemble" assembles multiple input meshes into a single object.
2. Option "load_filament_ids" sets filament ids for each loaded object.
3. Option "clone_objects" add multiple copies for each loaded object
Jira: STUDIO-4848
Change-Id: I707b48767a7c978118490398da440f0fb54351fa
(cherry picked from commit 8ddb456375be1abc6a0f692096068d8eda89b0eb)
1. Improve generation speed by removing unnecessary get_avoidance.
2. Fix a bug of hybrid support's interface (Jira: STUDIO-4878,
STUDIO-4726, Github#2614)
3. Fix a bug of tree support pass through objects (Jira: STUDIO-4252, STUDIO-4608
STUDIO-4298)
4. Fix a bug with first layer + Arachne (Jira: STUDIO-4281, Github #2423)
Change-Id: I40978c93ab93fa6964483514dad552d73a66c710
(cherry picked from commit 2ccbbe49c74d4aab4f086e79a6f8262b7fc80f15)
Jira: XXXX
copy some new parameter for new preset
Change-Id: If17f329eea541d9da332185367b2ea1b7972d2dd
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
1. Add bed macth result after doing gcode export,according to filaments
used in first layer
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icf70fce0310b86fffc5276fb8fb3bf4cc14afcb0
1. add a hook inside tree branches for improved strength
2. fix the issue that interface may fly as a mess (delete the logic
where gap nodes can skip dropping down)
3. fix the issue that base nodes may fly as a mess (smoothing should
skip polygon nodes, see Jira:STUDIO-4403)
Change-Id: Ie9f2039813c2ca3127ed8913304cc455fec8e7ee
(cherry picked from commit 83cef5f91d49ff3d275a89ec3df8b5f0fd573f8c)
JIRA: STUDIO-4824
add model_id to each plate config
Change-Id: Icdc234fe3b17493016037128f1c187b14014276a
Signed-off-by: Stone Li <stone.li@bambulab.com>
1. Rectangle objects get higher alignment weights, so they are aligned
better and we can now pack more of them.
Jira: https://jira.bambooolab.com/browse/STUDIO-4790
2. Fix the bug that align to Y axis may cause object flip 180 degrees.
Jira: https://jira.bambooolab.com/browse/STUDIO-4695
Change-Id: I0cccc3291c154848f8e0e8ef1aca7045518aef80
(cherry picked from commit 7fbb650d4d3d187277f849273cf76b4d0989a67f)
Auto-arranging allows more filaments to be printed on the same plate
Only HighTemp and LowTemp filaments are not allowed on the same plate.
Jira: https://jira.bambooolab.com/browse/STUDIO-4682
Change-Id: I1bd4966e6aaa55a6dd9dff05f0bd94f2795a62b0
(cherry picked from commit 965040912af0555ca190702e7c7ac92e177a2922)
Auto arranging may put exclusion region may be too close.
Jira: none
Change-Id: I613a2525620cf58cd9da7d27e8bb6d9d0a52d807
(cherry picked from commit a8ed3929d3596b8ee5400c9376ca040c75025524)
when the 3mf contains modified gcodes or self defined presets
a popup window will be shown
JIRA: STUDIO-4628
Change-Id: I975758132ba9d200255e7bf7d3a606fd609da5c8
1. refine some tip
2. alert when bed temperture greq than softening temperature
jira: STUDIO-4532
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib9623553a40825015744783f30c6e439827a49c6
1. set different bed_shrink for seq_print and layered print
2. fix the bug that seq_print arranging may get collision with exclusion
area.
3. remove unused functions.
Jira: STUDIO-4663
Change-Id: I8b726704cca33fe37bb3cb7c4502963a9ad8d16b
Jira:STUDIO-4227
Approximately 70% of the code comes from Prusa,thanks for PrusaSlcer and YuSanka
commit 492e356a21734b3503caae115fbb280da5fbaa22
Author: YuSanka <yusanka@gmail.com>
Date: Thu Aug 3 16:09:28 2023 +0200
CutGizmo: Fixed and improved Undo/Redo.
...
Change-Id: I63abb69180aec2ab0ce9bc8f30477d9e9a25a5fb
when the first support interface layer is default color, and the support filament is different
Jira: XXXX
Change-Id: Ibec1eb266ca86947cb56f7bfb4546569f66b1036
Astar.hpp, JumpPointSearch.hpp and JumpPointSearch.cpp are from Prusa.
Github: 1793
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Original Authors:
tamasmeszaros <meszaros.q@gmail.com>,
Pavel Mikus <pavel.mikus.mail@seznam.cz>
Change-Id: I72f68d59bc8bb3b7cc0f37276c10811bca2ac38c
(cherry picked from commit 7a14a6a48af68b6a3d7985bdb9c171aabeb70817)
1. only report slicing error when no-check not set
2. skip duplicate when under spiral_mode with by-layer print
JIRA: STUDIO-XXX
Change-Id: I03bf7f45b4cc43dcc1fd2ffb6b53321fe3324dad
(cherry picked from commit 083684c01194787f54fb88787b76c1e16179c6de)
1. sometimes the pipe open failed,
add some retry logic;
2. return the reason when no-check=1 while validate fail;
3. return an error when duplicate object under spiral-mode when not using
by-object print sequence
JIRA: MAK-xxxx
Change-Id: I3792d89dbbe560a8febe0f0154bccb8f573959a5
since the accuracy issue
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4534
Change-Id: I68f730abf90e0bf61ac25d4fa66c2c3ac8bacb29
(cherry picked from commit 9751e2504cd5c5748c02d42624318e4723ac9b57)
Including brim_max in bed shrink will make available area of bed be
small when an object has tree support, because this object will have
a brim_width as large as 24mm now.
Jira: MAK-2048
Change-Id: I309c0ec14e4acd75dcfc2fff0e7ea3558b43cc4c
Jira:STUDIO-4227
most of code from PrusaSlcer,thanks for PrusaSlcer and YuSanka
commit 1b451cdf9f8859aff58df54fa89d689aa47518d7
Author: YuSanka <yusanka@gmail.com>
Date: Wed Aug 9 13:22:11 2023 +0200
CutGizmo: Big code refactoring.
All manipulations related to cut are extracted to CutUtils now
...
Change-Id: I4e93e19b8e0d46ec2395247796c59587574851cb
Inner island is the one which inside a hole of the object. the brim area of such island should be limited by the hole
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4521
Change-Id: Iae70dbefc87b0cb7dcb19578f29aad16e9bd630d
(cherry picked from commit 2bf63f0ece88a230a37f83d156a44bdc76a0d094)
Previously when the overhang is a slop, it's controled by the xy
distance. Now we control it with top z distance as long as it's an
interface.
Note: Not working with Snug support, which has a different mechanism of
support interface.
Jira: STUDIO-3991
Change-Id: I1b7c4cf892b4c4ec2f3e668bd966ab0971212364
(cherry picked from commit c094b5ec83dc98dca7a8b8c0438b8f1994134db6)
We decide to set brim width of all objects to MAX_BRANCH_RADIUS_FIRST_LAYER if there is an object with tree support after discussion.
Jira: MAK-2009
Change-Id: I4c4940800632c433235966b01c44ac910e33a51c
We must ensure when independent support layer height is enabled, the
support layers are strictly synced with object layers. Otherwise, the
wipe tower toolchange may be messed up.
Jira: STUDIO-4097
Change-Id: I6208653f9665b15d028940d5e130c9e895629fc2
(cherry picked from commit 41d35c8af152c91cb356a68d88a879a115b44778)
JIRA: STUDIO-3921
fix the orientation bug that multiple objects does not perform the same
increase num of hull faces to iterate
Change-Id: I9c662e1e7858521585de612d7f1e9cd213e183bb
(cherry picked from commit 6a781a338df9d5a009ac5a667e8b1bc8009e32a9)
For tree support, use lslices as tree support island when generating brim,
as this is faster and more accurate.
For normal support, still use "support_fills.polygons_covered_by_spacing()" as support island when generating brim;
Jira: studio 4332
Change-Id: Ibfadd3a166606f824e5780b57112fff221470aaf
(cherry picked from commit 64960b19818c7029eaaaf3d8a89804aeaa26f11d)
Jira:STUDIO-4227
add TransformationSVD and some apis in Geometry for cut tool
these code from PrusaSlice,thanks for enricoturri1966
the original commit message:
commit 22ccb5657834e1b2fe548dc647a77044bc9c38f4
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Thu Feb 2 09:07:03 2023 +0100
Added class TransformationSVD to detect transformation matrix components using singular value decomposition
...
Change-Id: I4ce736449029d1fec22def20ef50fa20e1f48713
(cherry picked from commit da9e8127f5214f095da2db9a7898d2e0e84a0214)
Jira:STUDIO-4209
some codes are referenced form PrusaSlicer,thanks enricoturri1966 for the original commit
commit cf380fb4564fec4bd731e34819102f66fda23e75
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Tue Sep 21 13:51:57 2021 +0200
Tech ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS - Out of bed detection for circular printbeds
...
Change-Id: I1b1e2ff045286566d4fb9f2d8ad4faa1f135f60c
(cherry picked from commit 284bca9f1f4cdb9eb405e8205cd50666a2b0b2a0)
JIRA: STUDIO-4408
1. if min_obj_distance is 0, use auto mode
2. normal support, 5mm gap, tree support, 22mm gap, no support, 0.1mm
gap
Change-Id: I906ccf267bef1f33a946572614d658fd50cfcda3
(cherry picked from commit 771efc935da625d8faa4cc5b77fedc5055f93c6c)
Jira:STUDIO-4227
most of the codes are referenced from PrusaSlicer,thanks YuSanka for the original submits
commit 7cd99d98f537198b78158feced2aa8977bfcbe08
Author: YuSanka <yusanka@gmail.com>
Date: Wed Jul 12 18:06:51 2023 +0200
WIP: Cut with Rivets
* Code refactoring: get_connector_mesh() and apply_cut_connectors() moved from ModelObject to CutGizmo.
* Allow to change values of space and bulges for snaps
7cd99d98f5
...
Change-Id: Id4c7991a0ed5bf9608823601775920a81a3dd1c4
Multiple filament slots does not change the actual filament settings
Jira: 3797
Change-Id: Ib377b4c79aae731caa97b408e84a87a33b3bb155
(cherry picked from commit 7d704d8f0bae14f16087c77c1bd90946632330a6)
adaptive layer height won't work with conflict checker because m_fake_wipe_tower's path is generated using fixed layer height.
Jira: STUDIO-4442
Change-Id: I964a69af2fa0be8224ffc11e4c86f8ccf6dbf152
(cherry picked from commit e8c915f9e0b8c8f6cb549259b20d6d850a06d7d3)
1.Support get filament required hrc by filament type
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If0c1699331b75da17380b9eeca7bb155d98a14c2
1. If there is already a wipe tower on current plate, leave it there regardless need_wipe_tower flag.
This is useful when we have toolchange custom gcodes.
2. Correct wipe tower pos to prevent it outside bed.
Jira: STUDIO-4426
Change-Id: Iedecc7c5fe7ced01533d0a302253841046a7fb42
(cherry picked from commit e8d728e46b12baaf9fb0e87e3d14197ae3616826)
Add a new suport style "Tree Organic" from Prusa, as organic support is
faster and seems more strong in some cases. Thanks to Prusa.
Feature detection including sharp tail, small overhang, long cantilever,
are still kept.
Known issue: first layer support path may go outside build plate.
Jira: STUDIO-2358
Github: #2420
Change-Id: I4cec149bf4fa9eb733ae720ac1a7f65098e3b951
(cherry picked from commit d977bc5d3b4609f4fec0aa68152a33cacf184c4a)
Dominant direction is more accurate (solve the problem that cubes are
not arranged neatly).
Jira: STUDIO-4356
Change-Id: I8931f51a97bee96d5d9e75306481eae2e0cdc059
xun.zhang
Arthur
chunmao.guo
lane.wei
zhimin.zeng
maosheng.wei
Stone Li
qing.zhang
salt.wei
zhou.xu
wenjie.guo
wintergua
Oleksandra Yushchenko
liz.li
shuai.liu
enricoturri1966
tao wang