Jira: XXXX
copy some new parameter for new preset
Change-Id: If17f329eea541d9da332185367b2ea1b7972d2dd
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
For some application like Lego bricks, 100 is far from enough.
Jira: none
Change-Id: I94a6f47e75545bf35f16e493eb4bb05236ea98fe
(cherry picked from commit 2a4270adaaf7d14eb8b3d0397264df28b20a1ea2)
jira: STUDIO-4634
Change the font size of the status panel when using German as the
language.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ie820b5a521ad1582b5298cc7a409a1310e9d66f4
(cherry picked from commit aeed84b874d948619e318f8a55d18fbeb143be22)
jira: STUDIO-4525
In dark mode, the second '_' in the cavity temperature '_/_' display is
not clear.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I43547371d4c824c2820eb0cb88d67dd2c4dc4678
torus.stl is borrowed from Prusa by YuSanka <yusanka@gmail.com>. We
are thankful for that.
Jira: none
Change-Id: I45ee3fa7c1390fb48ecdc6a679ee5525526461d6
(cherry picked from commit 8ef4c9d9d44b1f66cb05259bb2135bd2e703f64a)
1. Add bed macth result after doing gcode export,according to filaments
used in first layer
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icf70fce0310b86fffc5276fb8fb3bf4cc14afcb0
1. add a hook inside tree branches for improved strength
2. fix the issue that interface may fly as a mess (delete the logic
where gap nodes can skip dropping down)
3. fix the issue that base nodes may fly as a mess (smoothing should
skip polygon nodes, see Jira:STUDIO-4403)
Change-Id: Ie9f2039813c2ca3127ed8913304cc455fec8e7ee
(cherry picked from commit 83cef5f91d49ff3d275a89ec3df8b5f0fd573f8c)
JIRA: STUDIO-4667
GITHUB: #2583, #2584
cherry-picked commit 27a2536a25104aceda148a9220cdda5cd20c8481 of iZonex
cherry-picked commit 160c61c0cb87d3caf76f2189720a0ad8f48ad21f of renemosner
Thanks iZonex and renemosner
Change-Id: Iedb80e60a30279627f19c1a5746427e44c8e2ec9
Signed-off-by: Stone Li <stone.li@bambulab.com>
JIRA: STUDIO-4824
add model_id to each plate config
Change-Id: Icdc234fe3b17493016037128f1c187b14014276a
Signed-off-by: Stone Li <stone.li@bambulab.com>
1. Rectangle objects get higher alignment weights, so they are aligned
better and we can now pack more of them.
Jira: https://jira.bambooolab.com/browse/STUDIO-4790
2. Fix the bug that align to Y axis may cause object flip 180 degrees.
Jira: https://jira.bambooolab.com/browse/STUDIO-4695
Change-Id: I0cccc3291c154848f8e0e8ef1aca7045518aef80
(cherry picked from commit 7fbb650d4d3d187277f849273cf76b4d0989a67f)
1. Do not pop up open door tip. Write the info to slicer info
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I1f611ee18faa5820a26443a13614f68f3e6ba780
Auto-arranging allows more filaments to be printed on the same plate
Only HighTemp and LowTemp filaments are not allowed on the same plate.
Jira: https://jira.bambooolab.com/browse/STUDIO-4682
Change-Id: I1bd4966e6aaa55a6dd9dff05f0bd94f2795a62b0
(cherry picked from commit 965040912af0555ca190702e7c7ac92e177a2922)
Auto arranging may put exclusion region may be too close.
Jira: none
Change-Id: I613a2525620cf58cd9da7d27e8bb6d9d0a52d807
(cherry picked from commit a8ed3929d3596b8ee5400c9376ca040c75025524)
1.Use printer_is_enclosed to decide whether display a pop up when bed
temp is higher than softening temp
jira: STUDIO-4532
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8602db8815093acded0439336f9a8fee52670261
when the 3mf contains modified gcodes or self defined presets
a popup window will be shown
JIRA: STUDIO-4628
Change-Id: I975758132ba9d200255e7bf7d3a606fd609da5c8
1. refine some tip
2. alert when bed temperture greq than softening temperature
jira: STUDIO-4532
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib9623553a40825015744783f30c6e439827a49c6
1. set different bed_shrink for seq_print and layered print
2. fix the bug that seq_print arranging may get collision with exclusion
area.
3. remove unused functions.
Jira: STUDIO-4663
Change-Id: I8b726704cca33fe37bb3cb7c4502963a9ad8d16b
Jira:STUDIO-4227
most of code from PrusaSlcer,thanks for PrusaSlcer and YuSanka
commit b40473be51fd1050fa4d7b2c3297230758085d46
Author: YuSanka <yusanka@gmail.com>
Date: Thu Feb 9 08:52:07 2023 +0100
CutGizmo: Improvements to identify Upper/Lower parts_count
Change-Id: I36cd64ec0a6ede696d22b854146fa3cdfd87ad91
estimate the wipe tower depth using more logic
JIRA: MAK-XXXX
Change-Id: Ieb66ebb7e75b20e61b7c0cb8e60496287434d31b
(cherry picked from commit 6b4d9d054fa52f7ff8ffd16461f686f54cab97fb)
Jira:STUDIO-4227
Approximately 70% of the code comes from Prusa,thanks for PrusaSlcer and YuSanka
commit 492e356a21734b3503caae115fbb280da5fbaa22
Author: YuSanka <yusanka@gmail.com>
Date: Thu Aug 3 16:09:28 2023 +0200
CutGizmo: Fixed and improved Undo/Redo.
...
Change-Id: I63abb69180aec2ab0ce9bc8f30477d9e9a25a5fb
when the first support interface layer is default color, and the support filament is different
Jira: XXXX
Change-Id: Ibec1eb266ca86947cb56f7bfb4546569f66b1036
Astar.hpp, JumpPointSearch.hpp and JumpPointSearch.cpp are from Prusa.
Github: 1793
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Original Authors:
tamasmeszaros <meszaros.q@gmail.com>,
Pavel Mikus <pavel.mikus.mail@seznam.cz>
Change-Id: I72f68d59bc8bb3b7cc0f37276c10811bca2ac38c
(cherry picked from commit 7a14a6a48af68b6a3d7985bdb9c171aabeb70817)
1. only report slicing error when no-check not set
2. skip duplicate when under spiral_mode with by-layer print
JIRA: STUDIO-XXX
Change-Id: I03bf7f45b4cc43dcc1fd2ffb6b53321fe3324dad
(cherry picked from commit 083684c01194787f54fb88787b76c1e16179c6de)
1. sometimes the pipe open failed,
add some retry logic;
2. return the reason when no-check=1 while validate fail;
3. return an error when duplicate object under spiral-mode when not using
by-object print sequence
JIRA: MAK-xxxx
Change-Id: I3792d89dbbe560a8febe0f0154bccb8f573959a5
Jira:STUDIO-4227
most of code from PrusaSlcer,thanks for PrusaSlcer and YuSanka
commit 1aa8d8ea99a56a622d234f71be8d312e1ebe4735
Author: YuSanka <yusanka@gmail.com>
Date: Fri Jun 23 16:53:29 2023 +0200
WIP: Cut with Tongue and Groove
* Implemented preview rendering of groove
...
Change-Id: Id5db8742db50aa10f9b5ebb057ba70f92fc22aeb
Jira: 4505 4508 4510 4511
fix: 4505 rewrite dialog just have yes, click x also create successful
fix: 4508 new filament preset show as printer
fix: 4510 create successful dialog has "printer"
fix: 4511 PLA-AERO has no such filament type
Change-Id: I193093b125581c41dfc396ecfa32b067c57a3845
since the accuracy issue
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4534
Change-Id: I68f730abf90e0bf61ac25d4fa66c2c3ac8bacb29
(cherry picked from commit 9751e2504cd5c5748c02d42624318e4723ac9b57)
Including brim_max in bed shrink will make available area of bed be
small when an object has tree support, because this object will have
a brim_width as large as 24mm now.
Jira: MAK-2048
Change-Id: I309c0ec14e4acd75dcfc2fff0e7ea3558b43cc4c
Jira:STUDIO-4227
most of code from PrusaSlcer,thanks for PrusaSlcer and YuSanka
commit 1b451cdf9f8859aff58df54fa89d689aa47518d7
Author: YuSanka <yusanka@gmail.com>
Date: Wed Aug 9 13:22:11 2023 +0200
CutGizmo: Big code refactoring.
All manipulations related to cut are extracted to CutUtils now
...
Change-Id: I4e93e19b8e0d46ec2395247796c59587574851cb
Jira: STUDIO-4506
upgrade render_slider_double_input_show_percentage api to render_slider_double_input_by_format
Change-Id: I62004e0d8be628ad73c2f2dfb61bff77caf32aab
1. Increase the acquisition and download testing of network plugin addresses
2. Automatically switch addresses based on the selected area
JIRA:STUDIO-4523
Change-Id: Ie4d6db110d27a6672171e4d5b841b0f68f0e58d8
Inner island is the one which inside a hole of the object. the brim area of such island should be limited by the hole
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4521
Change-Id: Iae70dbefc87b0cb7dcb19578f29aad16e9bd630d
(cherry picked from commit 2bf63f0ece88a230a37f83d156a44bdc76a0d094)
Sending the printing window, several printing options are displayed in the wrong position
Jira:STUDIO-4045
Change-Id: I5bf5b4295b015020eb38273ed13193d74f43c65d
It is difficult to distinguish between blank and empty thumbnails, so adding a diagonal line on the empty disk indicates empty
JIRA:STUDIO-4515
Change-Id: I46038c9256fc43927976b82f29ea895ce907d247
Previously when the overhang is a slop, it's controled by the xy
distance. Now we control it with top z distance as long as it's an
interface.
Note: Not working with Snug support, which has a different mechanism of
support interface.
Jira: STUDIO-3991
Change-Id: I1b7c4cf892b4c4ec2f3e668bd966ab0971212364
(cherry picked from commit c094b5ec83dc98dca7a8b8c0438b8f1994134db6)
We decide to set brim width of all objects to MAX_BRANCH_RADIUS_FIRST_LAYER if there is an object with tree support after discussion.
Jira: MAK-2009
Change-Id: I4c4940800632c433235966b01c44ac910e33a51c
We must ensure when independent support layer height is enabled, the
support layers are strictly synced with object layers. Otherwise, the
wipe tower toolchange may be messed up.
Jira: STUDIO-4097
Change-Id: I6208653f9665b15d028940d5e130c9e895629fc2
(cherry picked from commit 41d35c8af152c91cb356a68d88a879a115b44778)
JIRA: STUDIO-3921
fix the orientation bug that multiple objects does not perform the same
increase num of hull faces to iterate
Change-Id: I9c662e1e7858521585de612d7f1e9cd213e183bb
(cherry picked from commit 6a781a338df9d5a009ac5a667e8b1bc8009e32a9)
This reverts commit a6dfd79ea40e16a4942971ee8c5a0000a0b749d7.
Reason for revert: not master
Change-Id: If3e14e6f42bc05cdce610a1beb65c592fbb998fd
(cherry picked from commit 6fe189b233491b3700cdcc9a3c1d54d30754d06e)
For tree support, use lslices as tree support island when generating brim,
as this is faster and more accurate.
For normal support, still use "support_fills.polygons_covered_by_spacing()" as support island when generating brim;
Jira: studio 4332
Change-Id: Ibfadd3a166606f824e5780b57112fff221470aaf
(cherry picked from commit 64960b19818c7029eaaaf3d8a89804aeaa26f11d)
Jira:STUDIO-4227
add TransformationSVD and some apis in Geometry for cut tool
these code from PrusaSlice,thanks for enricoturri1966
the original commit message:
commit 22ccb5657834e1b2fe548dc647a77044bc9c38f4
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Thu Feb 2 09:07:03 2023 +0100
Added class TransformationSVD to detect transformation matrix components using singular value decomposition
...
Change-Id: I4ce736449029d1fec22def20ef50fa20e1f48713
(cherry picked from commit da9e8127f5214f095da2db9a7898d2e0e84a0214)
Jira:STUDIO-4209
some codes are referenced form PrusaSlicer,thanks enricoturri1966 for the original commit
commit cf380fb4564fec4bd731e34819102f66fda23e75
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Tue Sep 21 13:51:57 2021 +0200
Tech ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS - Out of bed detection for circular printbeds
...
Change-Id: I1b1e2ff045286566d4fb9f2d8ad4faa1f135f60c
(cherry picked from commit 284bca9f1f4cdb9eb405e8205cd50666a2b0b2a0)
JIRA: STUDIO-4408
1. if min_obj_distance is 0, use auto mode
2. normal support, 5mm gap, tree support, 22mm gap, no support, 0.1mm
gap
Change-Id: I906ccf267bef1f33a946572614d658fd50cfcda3
(cherry picked from commit 771efc935da625d8faa4cc5b77fedc5055f93c6c)
The consumables synchronized by AMS are prepared to be set to the same slot as AMS in the disk. However, after initiating printing, the slot value of the modified consumables sorting is not the set material
Jira:STUDIO-2564
Change-Id: I839b10a1b8169091c4e495beb6a15354e436f325
Jira:STUDIO-4227
most of the codes are referenced from PrusaSlicer,thanks YuSanka for the original submits
commit 7cd99d98f537198b78158feced2aa8977bfcbe08
Author: YuSanka <yusanka@gmail.com>
Date: Wed Jul 12 18:06:51 2023 +0200
WIP: Cut with Rivets
* Code refactoring: get_connector_mesh() and apply_cut_connectors() moved from ModelObject to CutGizmo.
* Allow to change values of space and bulges for snaps
7cd99d98f5
...
Change-Id: Id4c7991a0ed5bf9608823601775920a81a3dd1c4
Jira: STUDIO-3996
The buffer data submitted when the wireframe function is closed is half less than the buffer data submitted when the wireframe function is open
Change-Id: I92542190a5a45f562ec89d7c41fef3cdf1c26418
(cherry picked from commit b95650954f8bdb0cf81a2063efba4b2fced13a2f)
Multiple filament slots does not change the actual filament settings
Jira: 3797
Change-Id: Ib377b4c79aae731caa97b408e84a87a33b3bb155
(cherry picked from commit 7d704d8f0bae14f16087c77c1bd90946632330a6)
adaptive layer height won't work with conflict checker because m_fake_wipe_tower's path is generated using fixed layer height.
Jira: STUDIO-4442
Change-Id: I964a69af2fa0be8224ffc11e4c86f8ccf6dbf152
(cherry picked from commit e8c915f9e0b8c8f6cb549259b20d6d850a06d7d3)
1.Support get filament required hrc by filament type
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If0c1699331b75da17380b9eeca7bb155d98a14c2
1. If there is already a wipe tower on current plate, leave it there regardless need_wipe_tower flag.
This is useful when we have toolchange custom gcodes.
2. Correct wipe tower pos to prevent it outside bed.
Jira: STUDIO-4426
Change-Id: Iedecc7c5fe7ced01533d0a302253841046a7fb42
(cherry picked from commit e8d728e46b12baaf9fb0e87e3d14197ae3616826)
In assembly view, default selection is volume and painting needs an
object. It's inconvenient to select a full object to get in painting.
Jira: STUDIO-3322
Change-Id: I980e5a3ca7a9c5cf2800f28a38c1c68b978a343b
When there are multiple AMS slots, priority should be given to selecting the AMS slot that is consistent with the filament idx
JIRA:STUDIO-2564
Change-Id: I9aa208ba24f01ae20913f11c34a7f75a0a2581d5
Add a new suport style "Tree Organic" from Prusa, as organic support is
faster and seems more strong in some cases. Thanks to Prusa.
Feature detection including sharp tail, small overhang, long cantilever,
are still kept.
Known issue: first layer support path may go outside build plate.
Jira: STUDIO-2358
Github: #2420
Change-Id: I4cec149bf4fa9eb733ae720ac1a7f65098e3b951
(cherry picked from commit d977bc5d3b4609f4fec0aa68152a33cacf184c4a)
Dominant direction is more accurate (solve the problem that cubes are
not arranged neatly).
Jira: STUDIO-4356
Change-Id: I8931f51a97bee96d5d9e75306481eae2e0cdc059
Z height after timelaps gcode is changed. Should get
the new z height and save into gcode writer.
Jira: none, bug is found by self-test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I25516def507782600f0f270a339c88ea01a472a3
in brim generation, object's first layer extruders are obtained from regions.
If the extruders are changed at certain layers in by layer slicing mode,
the extruders from layer regions are not right.
this patch fix that issue by updating the extruder overridding in
a new member "object_first_layer_wall_extruders" in "print_object" class during
constructing "Tool_ordering" class. then using the new member directly when generating brim.
besides, support contour, which should be no_brim_area, is obtained from "support_infills" instead of "lslices" of "support_layers"
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4332
Change-Id: I271d0ea0d8c01c412d4fb9ade5296c6a6471aed6
(cherry picked from commit 9919ce9d1b9105b859273eee4fe9481c4dff6189)
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
by the multimaterial painting.
This commit is cherry pick from Prusa, the commit number is
9bce0fcf9bb479c289c396e7e23ce95841a61628
Thanks to Prusa.
Jira: XXXX
Change-Id: I29ad1fa9ab3ccc393a1e2affde1ae869d0a33afa
in previous codes, we generate brim for an object with raft, which do not need brim.
jira-ID: https://jira.bambooolab.com/browse/STUDIO-4238
Change-Id: I4b2c2c1c744c098cdcfdb03c2100b06a458e983a
(cherry picked from commit 0d06415d42c95e40f79a228f75827588171d410c)
Calibrated motor noise option, N1 supported.
And when none of the calibration options are selected, the start calibration button turns gray
Change-Id: I991034a13001f840016475171c33218ddc812d35
This causes the printer setting page unable to display becase I added a
coPoint type option best_object_pos.
Add reading and writing coPoint type configs solves the problem.
Jira: STUDIO-4303
Change-Id: I34e40e567236d28ab1a7be265128275191fcc935
support modifying whether to turn on prompt sound from the print option pop-up window
Change-Id: I3206bfcefc9292dd2a7acb7294addc901ad21d4d
(cherry picked from commit ecc13666689d7f644ed3db36088b32b239728779)
finalAlign was not correct because the excluded regions are counted twice.
Jira: STUDIO-4259
Change-Id: Ie4ad167af8487ce7250b83d85f144ef01e60e00f
(cherry picked from commit 154de0d94ff34231a60966fb89cc14655cce8008)
Add cmd line option to pass layer change gcode.
This is useful for lithophane auto change colors.
Cmd: --custom-gcode custom_gcode_toolchange.json
Examples of the input json file can be found in the jira.
Jira: STUDIO-4070
Change-Id: I5beb5ff7d6d81028e95013e79f955e498cd3ba30
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. treat the critical slicing warnings as error
2. save more information into result
including the triangle counts and the non-critical warnings
JIRA: STUDIO-4217
Change-Id: I25b746d06c9a1ef2d642c67852577982a2986322
maosheng.wei
zhou.xu
chunmao.guo
Arthur
wenjie.guo
xun.zhang
hu.wang
liz.li
Stone Li
Dmytro Chystiakov
lane.wei
qing.zhang
tao wang
zhimin.zeng
salt.wei
Oleksandra Yushchenko
wintergua
shuai.liu
enricoturri1966
Kunlong Ma
Lukáš Hejl
slynn1324
manch1n